Question about new sequence

Similar Questions

• question about stacked sequence

  Hello

  I have a question about stacked sequence.

  I have a stacked with 5 sequences sequence (0,..., 4). I would like to run these as this form

  0, 1, 2, 1, 3, 1, 4, 1 then again 0...

  I don't want to duplicate the section 1 because it contains many objects, variable... One possibility would be to out objects and then duplicate the sequence and use of shift registers, but I don't want to use because in 1, I have some graphs in real time to draw...

  Will there be another (easy) way to do this?

  Thanks for the ideas,

  Concerning

  Why use a stacked sequence?  What you want is a state machine something like this

• Questions about new HA in vsphere features 5

  Hello!

  I have a few questions about new ha features in vsphere 5

  I found, there is a master ha in the cluster that monitors other hosts and protected virtual machines through two type of heartbeats (network and data store) and move the VMS if necessary. If this host fails, an election is held and new master ha is determined by vcenter server.

  Ok! What happens if we install vCenter Server as a virtual machine inside the host who is the master ha in a cluster. If this host fails (something like a power cut) its agent goes too far and also the vcenter is destroyed. So, who's going to hold the election and introduce the new ha so that the old ha and vCenter are out of the game.

  I know that ha staff are not entirely dependent on vCenter and runs if the host taking vcenter is far (restart vms including vcenter or moved to another host on another) but I think this one is different because of the new role of master

  My next question is on the different types of events, which can arrive at the slave of the hosts and do their partitioned or isolation. I'll ask them later (once this question is answered

  Thanks to you all

  you mean master election (who needs to know the host object id in the cluster and the number of data warehouses connected and...) is performed by agents themselves? and he needs no intervention vcenter?

  No fix - no intervention from vCenter for an election of master.

  and another thing. When the host with vCenter machine on it and the role of chess master, how other officers find that the master is absent? is not the work of vcenter to notice and say to others when master does not work?

  Is not work of vCenter - is the work of the master and the process of hearbeating among the slaves.

  what I doubt is that: If slave hosts loose connectivity with the master, they think that they are faulty and should present themselves as isolated or partitioned and it is the duty of the vcenter to know when the captain does not work! can you please correct me here

  See above - is not vCenter work to determine which node is failed or isolated - it's the work of agents FDM.

  
  

  You should read the book of Duncan: http://www.amazon.com/dp/B005C1SARM/ref=as_li_tf_til?tag=yellowbricks-20&camp=0&creative=0&linkCode=as1&creativeASIN=B005C1SARM&adid=16Q69JRGDTX1DHPRKTQM
  

  
  

  It covers all this in depth.

• Question about Oracle sequences

  Please let me know if this question is not the subject of this forum and advise which forum I should post it. Thank you.
  
  We have a database 10g running on the AIX servers. A process of data loading was recently, and the development team is of the opinion that the question can be corrupted in the database sequence. This sequence is used to generate a unique primary key for writing in a table.
  
  Are there problems with 10g about the objects sequence database becomes corrupted? If so, is there a Metalink note published on a fix?
  
  Thank you all for a light on this topic.

  Hello

  Interview the max value of your column of tabale, in order to know the populeted of the maximum value of the sequence, compare it your currval in the sequence, and the maximum value for the column. If the values are not the same and the currval is lower than the max value, you will probably have the constraint violation, then increment the value of your sequence curr.

  Concerning

• Satellite C660-1F1 - Question about newer drivers and the speed of the memory

  Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?

  And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?

  Hi cryogenized,.

  > Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?
  Why you want to update your drivers? Do you expect a gain of performance with newer drivers?

  Way General, with official Toshiba drivers you are on the safe side because they are pre-tested. If you can make sure that they work properly and don t cause property damage. Install the other drivers happens on your own risk!

  > And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?
  The laptop is equipped with modules of DDR3 1066 MHz and the RAM speed is dependent on the FSB of the processor. If your CPU is throttling down, RAM modules will work also on low speed. On a high utilization of the processor (100%) the RAM modules must run with speed of 1066 MHz I think.

• Two questions about new Portege R700

  Hi all

  I brought a R7001F7 a few days earlier, there are a few question I hope some of you could help.

  1. the base of the laptop is not level (balanced) and oscillates to right, the rubber foot doesn't seem to be the culprit, don't know if it's badly formed chassis...

  2. the memory status shows 4 GB of available but only 2 GB usable, the speed is rather disappointed, is there a way to improve this? I miss some settings? because it is expected to reach the maximum of 4 GB...

  Did anyone of you met the above question? Since I just brought it, do you think I will return the machine or contact the security team? The problem is, I noticed these question, I am already registered in the machine on the warranty, don't know if I can still get a refund... However, I already transfer all my files system... This is why I would be very grateful if someone could give me some advice here.

  Thank you

  DLO

  Hello

  In General, you should contact the nearest Toshiba service provider and ask for help. They know how to act in such situations, especially about Visual problems.

  Can you please tell us what R700 you exactly (R700-xxx). Is 32-bit win7 preinstalled on your laptop?
  More on the use of the RAM on 32 bit OS you can read here - http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm

  What about the speed of the laptop or the performance in general? It doesn t depend on RAM only. It is very important that the preinstalled OS is properly configured. Original recovery image that you got with your laptop contains many tools and utilities that run in the background and reduce s for laptop performance.

  I recommend checking the applications running (start > run > msconfig > startup) and disable all unnecessary and utility tools. What makes the slow OS is tempro and preinstalled anti-virus software.

  Check it out.

• Question about new BIOS on Satellite L20 182

  HI :)

  I have a question: can I install new BIOS 2.20 on my Satellite L20 182 model No. PSL2XE?
  If I can't, why PSL2X users do this? Are there differences in the two models?

  Hello and sorry for my English - I'n not the best :)

  Hello

  just for explanation: the bios you mentioned is good the machine bios. Toshiba is not writing the complete model number since there is a range of numbers of the same model, Don t so you need not worry, they are not different. Maybe the last digit, but it is not important to you.
  Why am I knowing this? Because many manufacturers are doing this and I've been several times confused when updating the BIOS from another manufacturer...

  Welcome them

• Question about new wireless mouse:

  Got a Mobile Mouse Wireless 4000 for Christmas.

  I went through the installation process.

  The mouse seems very 'jerky' or 'jumpy' - do not know how else to describe it.

  What setting change to fix this?  TIA.

  Hello

  Have you installed the latest version of IntelliPoint for the new mouse?

  Microsoft Hardware - downloads
  http://www.Microsoft.com/hardware/en-us/downloads

  There might be a problem with the mouse - it solve problems you can and if necessary contact
  supported.

  Wireless Mobile Mouse 4000 - has a 3 year warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=013&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
  contact Microsoft at the number below.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS Hardware.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Envy 17: Questions about New 17 "computers laptops Envy with 6th Gen Skylake processors

  I see the new Skylake i7 CPU showed in the line of envy (I waited for my purchase), but he has very little information provided on the HP site and what's next is some confussion. I mean, I'm looking at a $2,000 laptop - a little information on the sales page would be nice!

  There are 2 17 '' want options (not the best value) that are customizable - display a touch and the other not.

  No touch lists a 256GB SSD option, and 1 TB spinner - touch lists a SSD 512 GB or double spinners.

  Basically, I can assume there are 2-Bay 2.5 "as previous models of envy, but what is the SSD? It is a 2.5 "SATA? What is M2? Is - this mSATA? If it's M2 or mSATA is on the lower part of the Board of Directors and easily replaceable?

  Which in the end line want is a bunch of fo SSD 512 GB (or 1 TB) and a cone of 1 TB for storage and available configs don't happen. Can I do it myself?

  Well, I guess I answered my own question...

  (manual for the 2015 Envy 17 is located @ http://h10032.www1.hp.com/ctg/Manual/c04696907)

  The manual shows a connection for the SSD with two m2 2 2.5 "bays. For those who wish to have a second (or third) car related parts appear to be:

  Hard drive cable 813795-001 (not shown)

  Kit (not shown) hardware hard drive 813796-001

• Question about new Mac client

  We went just to view 4.5. We had the 'AllowDirectRDP' option located in the political ad group to refuse direct RDP sessions in view 4.0, for extra security. Now that the Mac has a 'real' customer and may not use the web portal, one of our users is more able to enter his office. He receives an "Access denied" message, which origin of this group policy setting. I see in http://code.google.com/p/vmware-view-open-client/issues/detail?id=81 it seems that this option must be enabled for the Mac to connect with the new client. Anyone know if he's going to be a difficulty for us to stop direct RDP back again and have the Mac client still works? It's a precaution extra security for us, and now allow Mac users to get to drop this option, and I would get back eventually.

  Well, I don't know about whether or not the issue of the DRC itself will be fixed. I believe that the plans are to add support of PCoIP to the Mac now customer who will actually remove the need for this GPO.

  I can't say with certainty that these details have not yet been confirmed. Sorry I can't be more helpful!

  -Mike

• Equium A100 PSAAQ: Question about new update of the package of added value

  Equium A100 (PSAAQ) has received value-added information package download from toshiba, downloaded successfully, 3 provided separate files, zip files don't know which use as for the two buttons six buttons or without button machines, the question is which buttons do they refer to? so I know which file is correct for my machine, help please.

  Hi Andrew

  You should check this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25055

  It s on the same theme

• Update the BIOS Qosmio X 500 - 11U - Question about new

  Hi everyone

  I need to clear something up, the update of the BIOS that was published on December, 2010 was the 2.90 now a new March 2011 version is called 1.40! Is this an upgrade a downgrade or a joke? Should I proceed with the latest 1.40 or stick with the old 2.90?

  I forgot to mention that I own a X 500 - 11U and thanks in advance

  Hi nick73,

  On the European driver of Toshiba download page, there are two versions available:

  Update BIOS 1.40 - VICTORY for X 500 PQX34E models
  Update BIOS 2, 90-VICTORY for X 500 PQX33E models

  Your model X 500 - 11U belongs to the PQX33E series and this means only the update of BIOS 2.90 is compatible and 1.40 would be the wrong version.

  So it of not a joke and before you search for BIOS update next time, also use the right number of reference ;)

• Question about new BT stack v6.10.07 for Vista SP1

  Hello

  I have another laptop manufacturer that comes with a pile of Toshiba Bluetooth v. 5.10.04 (SO).
  Is the 6.10.07 new version compatible with my laptop? I have Vista Home Premium SP1 installed.

  The reason I ask is because the version of Nokia PC Suite 6.86.9.3 gives me a hard time when I try to browse the content of my phone via bluetooth. I had no problem with the old version 6.84, but after that I updated I can't find it anywhere.

  Here is the error that I got when I try to access the phone:

  Bq. bucket 701006833 of error, type 1------event name: APPCRASH------response: no------Cab Id: 0------signature of the problem:-P1: NclToBTSrv.exe------P2: 7.0.2.0------P3: 47be61ca------P4: ntdll.dll------P5: 6.0.6001.18000------P6: 4791a7a6------P7: c0000005------P8: 0003ed26------P9:------P10:------attached files:------C:\Users\Denis\AppData\Local\Temp\WER9FE9.tmp.vers ion.txt------these files can be found here:------C:\Users\Denis\AppData\Local\Microsoft\Windows\WER \ReportArchive\Report0af3c3ec------Faulting application NclToBTSrv.exe , version 7.0.2.0, time stamp 0x47be61ca, failed module ntdll.dll, version 6.0.6001.18000, time stamp 0x4791a7a6, exception code 0xc0000005, offset error 0x0003ed26, 0x14f4, process id 0x01c8c49a95fe99b2 to start the application.

  I read on the forums of Nokia that the new version of the BT stack solves the problem.

  Any help will be appreciated. I'm in no hurry, because I have a card reader, but sometimes I'm too lazy to get out the map just to transfer
  a photo.

  > Is the 6.10.07 new version compatible with my laptop?

  If the old version of Toshiba Bluetooth stack was already installed on your laptop, then I put t see serious reasons why the latest version BT should t be compatible too.

  The new version of the Toshiba BT stack can be found on the Toshiba BT portal.
  Download, install and try ;)

  Best regards mate

• Question about 'new folder '.

  My PC is having a technical difficulty, it seems impossible to create a new folder.

  Whenever I right click to create a new folder, the 'new' section became "(empty)".

  ??

  System: Win 7 professional

  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
  
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
  
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
   
   
   

• Question about new design java GUI tools

  I don't know where to put the Question
  
  I want to tool or packages to build java GUI that are quite similar to wpf
  
  I want a tool that provide not only the code of desinging
  
  is tool containing all these things
  
  nice design, easy

  http://www.Eclipse.org/WindowBuilder/