question about renaming a set of photographs

Similar Questions

• Question about Prefetch - somehow set auto clear, how it stop doing that?

  Some time ago I followed the instructions of the random people on the internet (stupid, I know) blindly and found a way to put my Prefetch to delete automatically whenever I restart my computer. I would like to change that - I was wondering how I would be able to undo that, now that the other programs are telling me that my Prefetch folder was recently allowed and that it is a 'bad' thing.

  I remember well, it was actually a microsoft... HMM, not sure what they call them, something I used to do. He said that he would set up my settings so that Prefetch would open automatically during startup (I think).

  How do I reverse this order? Please help ~! Thank you 1 million.

  Hi MissChes,

  You will need to make changes in the system registry.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  (a) click Start, type regedit in the search box and press OK

  (b) in the registry, navigate to the following location.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters

  (c) in the left pane, double-click EnablePrefetcher and make sure that the value is set to 3

  (d) close the registry editor, restart the computer and check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• QUESTION ABOUT THE COLOR SETTING BLACK AND WHITE

  HI, I WOULD LIKE TO PUT MY PRINTER INK PRINTING IN BLACK ONLY INK BUT WHENVER I TRY TO PRINT POWERPOINT SLIDES, IT WILL AUTOMATICALLY PRINT COLOR IVE YOU GO TO PRINTING PREFERENCES TO ADVANCE SETTING AND SET IT TO BLACK INK. PLS ADVISE. Thank you!

  Hello

  If he please completely close Power Point, to ensure that the printing preferences are set correctly and then reopen PowerPoint and try to print again.

  The Power Point also print dialog click on Preperties / settings and ensure that the settings are done.

  Please let me know if this is useful,

  Shlomi

• Question about the cmdlet set-hard drive

  Hi out there,.

  I would like to move a group of new data warehouses vmdk using the cmdlet set-hard drive.

  But I want to start moving just a svmotion operation at a time.

  How could I get the id of the task of the vcenter svmotion operation initiated by game-hard drive, so that I can use wait-job to wait to complete the svmotion operation to start the following?

  any idea of... tips are welcome...

  concerning

  Hello

  Welcome to the VMware communities.

  The cmdlet Set - hard drive doen't have a parameter - RunAsync, as for example, the Move-VM cmdlet. This means that the each hard drive Set command must finish before the next command can begin. To this effect, you don't have to perform the synchronization of tasks yourself when you use the cmdlet Set-hard drive.

  Best regards, Robert

• Hello, I have a question about the new plan to PHOTOGRAPH creative Cloud. Does not include the feature of plan free prosite? and what is the difference with the new Adobe portfolio application?

  Adobe Creative Cloud

  Please check the features

  Lightroom and Photoshop | Plan of cloud of Adobe's creative photography

  http://prodesigntools.com/creative-cloud-photography-plan.html

  Concerning

  Stéphane

• Hello Mr President! I have a few questions about the Word report generation please.1.How can I add a border to a page in word? 2. How can I add gridlines to a table generated related word?. Can 3. how I add a border to a picture of the Word report?. Thank

  Hello!

  Sir, I have a few questions about generating word reports using (C language in labwindows) please.

  1. How can I add a border to a page in word?

  2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?

  3. How can I fill a table cell of report word with the data type other than 'character '.

  And sir a question on the use of the timer in labwindows cvi please.

  Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).

  Concerning

  Imran

  Pakistan

  Have you read this statement ? It explains how to set the registry value:

  If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.

• Questions about nb200

  I recently bought a mini nb200 with windows 7 and I have a few questions about it. How can you set up your email, I was willing to put up with Outlook Express, but I don't know if I can. Also, is there a way to get a paper copy of the user manual?

  You can download and install a new e-mail program when you download Windows Live via Microsoft Update. You can select the components of Windows Live, you want to include by checking a box for each you want. I installed all the. Or you can use Outlook, if you have Microsoft Office and you want to install it.

• Satellite A350D - 20K - Question about upgrade second HDD + Temperature

  I have a question about my laptop. I have notticed it is a second location of HARD disk on the bottom.
  Is it possible to use this to increase my storage?
  And if yes, how do I do that? I don't see all the connectors.
  What type of HARD drive to use in case it is possible to use this slot machine?

  My second question is on my laptop to be very hot after a short period of use.
  I installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees.
  He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.

  This does not seem normal to me. I tried to clean the vents with compressed air, but it has not made a difference.
  I searched on the internet how to take the laptop part for proparly cleaned TI.
  But I can't so I'm looking that destroy it.

  This could be the cause and more importantly, how can I solve this problem?

  Tom

  The second HARD drive bay contains the HARD drive connectors?
  If Yes, then you can use a SATA 2.5 HARD.
  If there are no connectors, then you will not be able to use the second HARD drive

  > I have installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees. He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.

  CPU and GPU produce a lot of heat. The heat dissipation is always created then there s nothing unusual that the temperature rose to higher level.
  You can change the settings in Win 7 power management. You can set the CPU to lower performance and can increase the activity of fan, which will help lower the temperature.

• Questions about an average of response spectrum and frequency of feeding mode.

  Hello

  I have a few questions about an average of mode. When I generate a sinusoidal signal from one output to two input channels channel to see if my DAQ card works well and vector averaged in the power spectrum for DFT, the amplitudes was different from the previous one of the amplitude, which was supposed to be 1 v peak. They range from 0.5 v to 0.6 v peak. When the calculation of the average model is RMS, the amplitudes were close to 1. I wonder what are the fomulas of RMS and average vector. Does that mean that I could not accurate if I use an average of vector? In a time of frequency response, why I coherences of difference and the amplitudes using the vector and the mean quadratic value?

  Thank you

  Ningyu

  rico1985,

  The differences in modes of generation are as they sound: 1 sample output only a sample writing, N samples will be released however many samples configure you for each entry, and the continuous samples released samples continuously until a specified user action happens (you press the stop button or a logic that you created gets fulfulled). The range of Signal output allows you to set a ceiling high and low level of your output signal and it only affects the quality keeping in this beach. Timing to set a deadline for the time between the acquisition of the sample. If a new sample becomes unavailable before the timeout setting, you will get an error. This is useful for looking at a network, because if the network goes down and you stop getting data from a machine and then you would like to know about it. I point you to those videos that are short tutorials on how to make the most of these actions in SignalExpress.The SignalExpress 3.0 Help file is also your first point of contact for all your questions on getting started. These two resources should get you up and running in SignalExpress in no time. (either by the way all your questions answered using these resources) Bravo!

• Question about support for LabVIEW DLLS and Unicode

  Hello

  I have a question about LabVIEW and DLL functions calls.

  I use a DLL (sorry, I can't share it) that was written in C. It was written to support Unicode and non-Unicode function calls.

  The Unicode function is valid, then FunctionNameW is called if FunctionNameA is called.

  I am building a few VI to access the library. I have the regular functions of FunctionNameA work.

  My question is, does LabVIEW support versions of function FunctionNameW Unicode, and if so is it necessary Although LabVIEW is already working with the standard function call?

  Am I being redundant or what should I build in Unicode support?

  The first time I tried to test the Unicode functions, I had an error, and I guess this is a system setting.

  Thank you for your time in advance.

  DB_IQ wrote:

  I don't think I have TO implement the Unicode, but I want if I can.

  For what I do, I think almost it is not serious. But I wanted to know if it could be used.

  The short answer is "Yes, you can do it."  However, it may open a new Pandora's box.  If you're not careful, problems and complications that can still spread to other projects that are not using Unicode!  It is better not to summon this monster unless there is absolutely no other way to do the job.

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Questions about reinstalling Windows XP after the end of Support

  Several members of the family of my friends that I sometimes provide technical assistance for are still under XP SP3 on their systems.  These systems are too outdated and underpowered to upgrade to a newer version of Windows, and it will probably be some time until they are able to upgrade to a more recent hardware capable of running most modern versions of Windows.

  If in the meantime, something happens to one of their computers requiring a reinstall of Windows after support for XP purposes, but before they can get a newer computer, I have a few questions about what will happen:

  1. Is there still a way to activate their existing copies of XP during installation process?
  2. While I understand that new patches, updates, patches & will be is no longer provided, existing patches will be available through the Microsoft Update service so that I would be able to get those computers to update state that they would be about to XP supported ends, or do I have to search elsewhere to try & find these updates?  (It would be nice if Microsoft put up a cumulative update that would be sort of a mega-patch for people in this situation to be able to get back to the most current state systems, but I would not be surprised if there wasn't such a thing).

  Anyone know the answers to these questions?

  Thank you

  You should be able to clean install and activate Windows XP.  You should be able to upgrade as well, even if the wise move would be to get the updates stored on portable media or integrated into a multimedia installation (or both) as soon as POSSIBLE if the plan is to continue using Windows XP for a while.

  My suggestion is to set up and to buy Windows 7 Professional renovated systems / lease from places like TigerDirect.com - as pricing is generally about the same as just a license for Windows 7 or a little professional, the hardware specifications of these machines are likely machines Windows XP current in use, using something like the PC Mover take care of Laplink and Microsoft to move files (or for the more than 25 USD the) applications that can be moved as well) to the new system of the former is possible, and Windows 7 will get updated until 2020.

  Recently research I've seen systems to Windows 7 Professional for as little as 150 USD with 4 GB of memory and dual core processors.  Not bad.

• This is a question about ATI

  This is a question about ATI (whatever it is?) that is installed on my computer.   I constantly get a message indicating that VPU RECOVER has reset the accelerator graphics etc, etc and I have to click on send, but the message comes back as undeliverable.   What now?

  ATI is the brand of your video card.  The brand is now manufactured by AMD.  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  The message indicates an automatic recovery of an error condition.  From the little I saw in a quick Google search, it can be difficult to find the precise cause of the problem.

  This page gives a few suggestions, but if they seem to be beyond your level of technical expertise, you might be better the computer in a local independent repair shop renamed (not a type BigBoxStoreUSA or rather GeekSquad)--> http://www.radiognome.com/2009/02/28/vpu-recover-issue-and-ways-to-fix-it/

• A few questions about my new Z5 Compact camera

  A few days ago I bought the Xperia Z5 Compact (and updated the marshmallow) to replace my Z1 Compact and meanwhile read the manual and looked into the camera settings. Now I have 2 questions about the camera.

  (1) according to this manual, it takes an option to 'adjust the color and brightness manually. I rember having seen this option once in the form of 2 sliders, but now I cannot reproduce it more and find more options in the settings. What should I do wrong or overlooking?

  (2) I noticed that I can manually put only iso for resolution of 8 MP or less. When I put a 20 MP resolution, the iso setting is grayed and automatically the value. Is this a normal behavior?

  Thanks in advance for the answers.

  Hi @Rijnton,

  I just tested this on my Xperia X but it runs on Android M, it should be similar to the Z5 Compact (although there may be some differences).

  Color and brightness options may not be available in manual mode, but are for higher Auto and video.

  

  

• INSPIRION 3543 - question about jack combo

  Hi, I have a question about a laptop Inspiron 3543. He installed the combo input jacks, and I need to use the line of input and output audio.

  Question 1: Is - it enough for me for this purpose a headphone splitter - 2 jack x ordinary?

  Question 2: Is this laptop allows you to adjust the entry on the line in mic?

  Sorry for the broken English, but I write with a translator: D

  dayer41

  Question 1: Is - it enough for me for this purpose a headphone splitter - 2 jack x ordinary?

  Hello. Jack combo on the Inspiron 15 3543 is intended to be used with standard stereo headphones, or with headphones (stereo headset with a built-in mono microphone).

  In theory, a dispatcher or an adapter with a plug out of SOCKET (tip, ring, ring, sleeve) can be used with a combo Jack. A plug from SOCKET looks like this:

  

  However, we have received many messages from people saying that the adapter did not work for them. Some people have posted and said that the adapter works for them.

  Note that the entry of a combo Jack is mono. There is no way to make it be a stereo input.

  dayer41

  Question 2: Is this laptop allows you to adjust the entry on the line in mic?

  You can set the input mic in sound properties volume (Control Panel > Sound). Open the properties of the sound, and then click the recording tab at the top. Right click on the Microphone. Click 'properties '. Click the tab at the top levels to find the sliders to adjust the volume of the mic input.

  It is similar to this image, except that you must click on 'Levels', not 'listen '.