Question about scanning of photos with Windows Photo Gallery.

Similar Questions

• Question about restore CD-DISC with Windows XP Home Edition

  I have Compaq Presario V5000 and I have a license of Windows XP Edition sticker X 11-45374 on this family. Where can I download the disk.

  All right, the installed Windows XP Home and my series was accepted and activated also. Thank you all!

• all my scans pdf open with windows photo viewer, which can take to see in Adobe Reader?

  all my scans pdf open with windows photo viewer, which can take to see in Adobe Reader?

  Did you create PDF files?

• Scanning options disappeared with Windows Installer 8.1

  Recently bought a new laptop with Windows 8.1.  Finally managed to get my PhotosmartPlus B209 connected so it'll print and scan.  On my old laptop, when I scanned it pictures, there was a lot of options to choose from before that I did the actual analysis: several images, resize, rotate, resolution, color correction, to name a few.  Now, on the only option I have is the resolution and can only scan a whole page - not many images.  What Miss me?  What should I do to get all my previous options available?  Added note, I had to change my PhotoImpact 12 PhotoShop elements like my photo editor.

  Found my own answer.  HP tools for scanning only works on the TWAIN compatible devices.  Photoshop has a plugin option that does not install automatically.  Once I found and copied into the correct plug-ins folder, everything works again.

• program lost scanning and photo gallery after having a virus deleted.

  Original title: digitization program lost after having a virus deleted

  I have now no windows Photo Gallery program and no way to set up analysis on my new printer hp that is supposed to analyze. Where should I start... with hp or downloadsing free download windows photo gallery

  Hello

  1. they are missing or you are unable to open then?
  2. do you get an error message while trying to open these files?
  3. what software of scans are you referring?

  I suggest you try the steps and check them off below.

  Step 1: Try running windows photo gallery and the C drive scan software.
   
  Access to the photo library path: C:\Program Files\Windows Photo Gallery\windowsphotogallery.exe
  Research of software scanning in C:\Program Files\
   
  Step 2: Perform scan sfc on your computer.
  Reference: http://support.microsoft.com/kb/929833

  Scan a document or file
  http://Windows.Microsoft.com/en-us/Windows-Vista/scan-a-document-or-file

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
  Thank you very much!

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?

   

  Yes, the registration period is between June 2, 2012 to January 31, 2013.

  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?

   

  Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.

  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.

   

  Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.

   

   

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  Then follow the instructions that will be provided on-screen to cool your PC.

  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
   
  As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
  Thank you very much!

• Printer all in one HP PSC 2350 - how to scan to PDF with Windows 8

  How a scan for types of PDF files with Windows 8 using HP PSC 2350 all-in-one application printer and Windows Fax and Scan?  The ability to save as PDF is not an available option that is staggering.  I downloaded the latest version of the Windows 8 HP for this printer driver and the most recent Acrobat Reader.  Thanks for all the hints and solutions!

  Hey thanks AlwaysNeon.  I had downloaded the latest drivers, etc..  I agree, she should be with MS Windows.  I did a query in their forums, but nothing jumped out as a viable solution.  I have a workaround if... to print the file to a PDF creator and download the PDF in this way.  Another step involved but it works.  Onward through the fog...

• Epson dx3800 scaner works only with windows 7

  Hello
  can someone help me, I have a laptop with windows 7 on it trying to put my epson dx3800 on it, but the scanner does not.
         
  Derek

  Hello

  ·         What version of Windows 7 use you?

  ·         Using Windows 7 32-bit or 64-bit?

  ·         What happens when you try to scan?

  Microsoft Windows supports Windows Image Acquisition (WIA) scanners and cameras. To check if you can use your scanner in this way, connect it to your computer and open Start > devices and printers if you see an icon for your scanner in the scanners and cameras window, scanning support is available. Double-click the scanner icon and follow the prompts on the screen.

  Method 1:

  I suggest you to update the latest drivers from the manufacturer's Web site and check if it helps:

  http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-DX3800-series/drivers-support

  Method 2:

  Also check if the services Windows Image Acquisition (WIA) is running or not.

  1) click Start and type services. MSC , and then tap on enter.

  (2) check if Windows Image Acquisition (WIA) is running if not.

  (3) right-click on the WIA service and select Properties.

  (4) change the startup type to Automatic , and then click apply.

  Hope this helps,

• Cannot scan to laptop with Windows 8

  I've been using a Canon MX870 on my previous laptop with XP, not printing problems and the scan to my laptop.

  New laptop with windows 8, print from the laptop ok, will not scan to my laptop to the printer.

  Download all software update from Canon.

  Windows 8 does not recognize the MP Navigator, telling me that the driver is not installed.

  Thank you

  Graham

  Hello Jessen,

  Thank you for your prompt response and Advisor.

  I have only just open the email, I lost track of it.

  I managed to solve the problem for me, I'm not sure exactly what went right.

  I updated my BIOS from the manufacturer, because it was a new computer.

  I then remove the drivers.

  Remove the data cable to the printer.

  I downloaded all gun pilots, supported software.

  I clicked on the tab of the Windows 7 operating system, but the software is suppose to be ok for up to 8.

  Restarted.

  Then he was allowed, can not have bad luck all the time.

  concerning

  Graham

• Pictures disappear completely after installation with Windows Life Gallery.

  I am editing with Windows Live Photo Gallery. Editing is fine, but later photos becomes no existing. The original is also gone. I have re downloaded and tried to change once again, and it's the same thing. I'm so frustrated. How can I solve this?

  Too bad. I thought about it. Haha. But if you have this problem, too, here's what I did. I went to the properties of the folder and clicked around with the 'Hidden' and 'Read only' options until they came. Haha.

• Disregard my previous question about downloading the version of Windows on a disc. My friend was able to download itself with dial-up.

  Earlier today, I asked if it would be possible to download the Windows of Thunderbird on a disc using my Mac. My friend just called and said she has downloaded successfully to herself. Sorry for the false alarm.

  all communications on this can be found here:
  https://support.Mozilla.org/en-us/questions/1008956?ESAB=a & s = & r = 0 & s = ACE

• Question about particular processor working with my PC.

  Basically, I have a 1200-07w eMachines and I'm sure that a particular processor will work with my pc but I wanted to check before I bought it. The I am wanting to upgrade to the processor is an AMD Athlon 64 X 2-5050. I know Athlon X 2 works, but I wanted to make sure that the Athlon 64 X 2 is compatible as well.

  Thank you

  It would be better to check with eMachines Support technique http://emachines.com/support/options.html where they know their systems better than we do and should be able to answer your question.  We have no information on what components go into what systems so we can really help you.  The best that we can do is refer you to the center of Vista compatibility where this component may or may not be listed:http://www.microsoft.com/windows/compatibility/windows-vista/ (I checked but couldn't find) but that would be only you say about compatibility with your version of Vista (if it is listed) - not if it will work with your machine - and you should take note that using the wrong processor can cause damage to both it and the motherboard and other features as well - so maybe SOME before you install.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have questions about the use of Microsoft Windows for computer repair purposes...

  I'm about to start a computer like Geeksquad repair business. If I need to re - install Windows on computers is a specific copy, I need to get Microsoft for use of technician? I want to make sure I'm following all the recommendations of Microsoft.

  Hello

  I suggest you to post your questions in the TechNet Forums for a better answer.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• PIXMA MG6120 scanned in PDF with Windows 7, but not after that I went to Win 8.1/64

  I have a printer Canon Pixma MG6120, who analyzed the documents properly to a pdf file in the past, but will not now.

  The last time that I scanned a doc to PDF was July 1 when I was running Win 7 Home Premium with any driver was then installed.  The printer worked properly in all modes.

  Then I bought a new desktop that came with Win 8.1/64.  I thought it would automatically update all my device drivers, and given that all print and copy on the gun functions work well, until yesterday, I had no reason to suspect that something was wrong.

  Now when I try to scan a document to a pdf file, I find that I can't scan anything, in any format, even if the other functions of the printer are working very well.

  I used Windows to search for updated drivers and note that I have the right pair.  But there are two cryptic messages on the window 'events' devices and printers when I see exactly which driver I have:

  • Driver management concluded the process to install the driver prncacla.inf_amd64_19fbb18075fefb90\prncacla.inf for the Instance ID of device USBPRINT\CANONMG6100_SERIES\7 & 47229F9 & 0 & USB001 with the following status: 0xE0000246.
  • Driver management concluded the process to install the driver mg6100p6.inf_amd64_7a61593f9c801b4c\mg6100p6.inf for the Instance ID of device USBPRINT\CANONMG6100_SERIES\7 & 47229F9 & 0 & USB001 with the following status: 0x0.

  And I don't know how to determine exactly what driver or version I actually.

  I do not remember having messed up the settings but I must have.  But I can't understand how to reset them so that I can scan anything, even in JPEG format.  Here is the sequence of messages that I get when I try.

  • I put the doc in the correct position on the screen.
  • I choose scan and then press 'black' to start scanning (or 'color'; it's okay)
  • It says "processing...". Please wait... »
  • nothing happens; the machine returns to the original screen I can only try again, and nothing past then is
  • I can so where I can click on "scan settings".  I always forward scanned docs on my desktop through my USB cord
  • I click on 'scan settings' and I get:
  • size: 8 1/2 x 11 (that's what I want)
  • format: PDF (which is what I want). There is an exclamation point and I can click on "error details" so I did that.  I get:
  • 'specified function not available with the current settings.  ' Change the following settings: Format.
  • To change the format of JPEG.  I click on 'black' and he said: ' treatment... please wait "and then he returned to the starting window as it did when I tried to scan to a file pdf. nothing works!
  • So I'll be back to where I can try to review the pdf settings, and only I can change all the others that choose JPEG, etc., instead of PDF, is something called 'unsharp mask' on or off.  Choose one or the other has no effect.  The printer will not at all, analyze a file pdf or something else.

  For example, nothing works.

  I think that I don't really have the right driver, but Windows says I do.

  Help, please.

  THX.

  Tom

  Hello.

  Please ensure that our MP Navigator EX program is installed.  This program controls the scanner.

  You can download the program on our Internet site at the following link:

  MG6100 Series driver & Softare

  If additional information is required, find more help contact us.

• Question about Portege 2000 boot with Linux

  Hello world

  My Portege 2000 PIII 750 MHz, 512 RAM, 20 GB is just driving me crazy. I would try to install Linux and downloaded some distributions to try it. By the way, I use an external CD/DVD player, with a 16-bit pc card connector cable. Starts the startup until the BIOS is involved, but when it gets to the pilots being involved, start crashes, with each distribution, except of course to win XP, with which he moved perfectly.

  Anyone have any suggestions on how to proceed? I would really like something lighter than Windows XP Home edition on my machine. THX!

  Hello

  I do not have this Portege, but I know that the recovery Toshiba (WXP) image contains the external driver for ODD and installation can be done without any problem.

  Maybe you can find some useful tips in http://newsletter.toshiba-tro.de/main/index.html