Question about series/authorization numbers

Similar Questions

• The question about the interconnections of fabric UCS 6300 Series

  Hello

  I have a question about UCS 6300 Series fabric interconnects. Is this fabric UCS interconnections 6300 series integrated into the extension of tissue function?  The reason why I asked this question was, when there is 6300 series fabric has been plugged UCS 5100 chassis, there is no more space to plug in extension of UCS 2200 series fabric. My understanding on the topology of the UCS, tissue extender is the connection between the blade and the fabric of the interconnections.

  Thank you

  Bob

  Hi Bob

  Yes, that's correct!

  The chassis so called FI - IOM (see attachment p52); THE IOM = FEX.

  I/O of the blade adapter to connect inside basket chassis, which connects to the built-in IOM.

  IOM is then connected to the built-in FI.

• Question about warranty after exchanges of RAM on Satellite module series

  Hello together,

  I have a question about the warranty. My laptop is 5 months old and now I want to improve it with more RAM. I want to do it myself, and now I'm wondering if the warranty will be getting hurt.
  Thanks in advance for your answers.

  Concerning

  TiG3r

  For new models of laptops the RAM upgrade described in s operating manuals. It is public act and it shows the owner of the notebook how do RAM upgrade only.

  If Toshiba offers something like this he won't have the negative influence of valid warranty.
  Buy a compatible module and RAM upgrade.

  Bye and good luck!

• Questions about the sort of numbers?

  My wife is to create a database using a set of 9 numbers and wants to sort them using the "final four" of the series.

  Is there a a way to sort the four latest os using a series of numbers?

  Thanks for any help

  Don

  I suggest adding an additional column to extract the last four digits like this:

  

  the 9-digit number is in column A and the last four digits in column B.

  Select cell B1 and type (or copy and paste it here) the formula:

  = RIGHT(A1, 4)

  shortcut for this is:

  B1 =RIGHT (A1, 4)

  Select cell B1, copy

  Select column B, paste

  now, you can sort on column B

• Ask questions about the HP Pavilion 14-V041TX Bluetooth

  Hello, sry for asking questions about simple things.

  How to activate bluetooth for laptop HP Pavlion 14-V041TX?

  Or how to bluetooth to detect other bluetooth devices?

  coz already try to use my smartphone, but cannot detect any bluetooth device or laptop.

  for what I know, I already install the driver for bluetooth.

  Maybe there's another driver, that I'm missing?

  Thank you.

  SRY for my bad English.

  HI @Ton1_qrenz ,

  Welcome to the HP Forums!

  It's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  No worries about your English.  I believe that I understand your question, and if not, you can specify if you must post back.

  I understand that you are unable to detect Bluetooth devices.

  Here is a document to help you with this company. There are links that it contains other documents that can also be of assistance.

  Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  If the problem persists, try the following steps.

  Step 1. Go to Device Manager
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
  Step 2: Now find 'Bluetooth Support Service' and double click it
  Step 3: Now click on the Log on tab and type "Local Service" without the quotes
  Step 4. Click on "account".
  Step 5: Now remove any authorization of passwords the password field blank
  Step 6: Below the upper left title should be a hyperlink 'Start' click

  You can also view tab management power and unchecked the box "Allow the computer to turn off this device to save power."

  If it is still not resolved, I suggest contacting HP support for further assistance.

  Please contact our technical support at the 800-474-6836. If you are outside the United States / Canada region, please click the link below to get help from your region number. Phone goes everywhere in the world

  Good luck!

• Many questions about the HP 50 g

  I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

  Thanks for your help,

  Zekelegge

  Hi!, zekelegge:

  Welcome to Forum!

  The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

  The printer... HP 82240 B

  

  The cable series...

  

  The description... http://www.allenwan.com/hpcalcserialcable/

  The original cable...

  

• A few quick questions about the Satellite P300 - 18 M

  Hello

  I am about to order a Satellite P300 - 18 M and have just a few questions about this:

  (Although these may apply for other similar Satellite/Equium P300.)

  Is the touchpad made by / to use the Alps or Synaptics driver?

  It has the Wireless N network card, is the map made by Intel or Realtec?

  And also, someone has experience with face recognition software to connect?

  If so, does it take a lot of time to initalise?

  Thanks in advance,
  Jack

  Hello

  The P300 - 18M belongs to the PSPCCE series.
  It uses the two touchpad drivers. Synaptics & Alps Electric
  There is an Intel 802.11agn minicards WLan installed

  The face recognition is a nice tool but local to be illuminated and you must take your face the right of the post sometimes it of not very easy

  But if you face is recognized correctly that the connection should work properly

  See you soon

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• Satellite A200 - Question on the reference numbers

  I have a Satellite A200-221 (PSAE3E) motherboard is faulty. I sent him the public support of Toshiba and they confirmed that the motherboard is faulty and I had to buy a new one. It was too expensive, so I don't let them fix my laptop.

  Now, I've seen on ebay a motherboard which is the model that I need (THE ILHAM - 3481P) but I don't know if it fits, because the part of the processor number is not the same as mine. Mine is K000058130. Card mother eBay is K000057340.

  Which replace Council mine perfectly faulty motherboard?

  Thank you!

  Hey,.

  I'm a little confused about your ad Mr. why you speak a number of CPU if you need a new card of mother?

  In any case, here it s a user forum. This means that you can speak with normal people like you and me here. These questions about reference numbers can be answered to an authorized service because they have access to all the databases of Toshiba.

  Check this box!

• RAM and GPU update questions about the Satellite A60 652

  Hello

  I have a question about my Satellite A60-62. I want to upgrade the RAM, but I do not know what kind of chip that I have to do and how that insert into the laptop.
  I also want to get a new card to my video graphics, I currently have "Radeon Mobility IGP 7000', is this possible, and the same questions again, what card do I need and how to I insert in the laptop..?

  Thanks for any help.

  Hello

  The works of A60 with PC2100 and PC2700 memory.
  The maximum is 1536 MB.
  Toshiba part numbers are:
  PC2700 256 MB PA3311U - 1 M 25
  PC2700 512 MB PA3312U - 1 M 51
  1024MO PC2700 PA3313U-1M1G

  The graphics card cannot normally be improved.

  Good bye

• Question about the issue of the Double NAT...

  Hah I posted for a little.  I have a question about Double NAT.  Is it wise to launch?  Reason why is that I have a WRT54G v6 router and the Zoom ADSL X 4 Modem/Router/gateway and it seems that sites take just a little more time to respond to Web sites.  I just want to know I have to turn off (i.e., go in with my router bridge Mode) or what.  Or leave it alone.  Now one last thing: that the problem of slow could actually be AT & T but I have the feeling that this isn't.

  What configuration options you have on the Zyxel to fill? What have you tried exactly?

  The basis for the first option is:

  * Bridged Zyxel.

  * Linksys configured for PPPoE with your user name and password for the internet connection.

  Instructions to fill the Zyxel are here or here depending on the exact model of Zyxel.

  The second option is:

  * Zyxel doing business as the router. I assume here that the Zyxel is on 10.0.0.2 with a subnet mask 255.255.255.0.

  Unplug the Linksys to the Zyxel. Connect a computer to the Linksys. Open the web interface of the WRT to http://192.168.1.1/

  On the main Setup page:

  1. change the LAN IP of 192.168.1.1 address 10.0.0.1.

  2 disable the DHCP server.

  3. save the settings. You will lose the connection. Unplug the computer.

  4. wire one of the numbered LAN ports of the Linksys for the Zyxel. Do not use the internet port of Linksys!

  Now you should be able to open the Linksys web interface to http://10.0.0.1/ all devices connected wireless of Linksys or connected to one of the three LAN ports must have a connection to the internet via the Zyxel.

• Question about the strength of password

  (do not ask questions about the recovery of the password, so please do not report this thread)

  OK, I heard that the virus can change the password on a computer.

  But if you have a password very complicated (for example, one with a lot of numbers and other things), it will be more difficult/less likely for the virus to be able to change your password?

  Yes.  A strong password is, it is more difficult to crack.  For more information, see create strong passwords on the Microsoft online safety site. Boulder computer Maven
  Most Microsoft Valuable Professional

• General question about the updates and version number

  I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

  In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

  Version - VMware ESXi, 5.1.0 1612806

  Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

  I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

  Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

  I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

  I hope this makes sense.

  Thank you

  This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

• I bought the first elements 13 and 13 Photoshop elements according to a trail. I received 1 set of serial numbers to activate Photoshop and 2 sets for first. However, after you type in the first series of numbers for the first, there was no place to type

  I bought the first elements 13 and 13 Photoshop elements according to a trail. I received 1 set of serial numbers to activate Photoshop and 2 sets for first. However, after you type in the first series of numbers for the first, there is no place to type in the second set. How can I check if the first has been correctly activated?

  You get usually just a serial number by program... a list of 24 numbers, 6 sets of 4.

  Click the icon of the program and see if it boots without asking for a serial number.

  If it is not running now, please contact support:

  To contact support, please click the link below, click on the still need help? option in the blue box below, then choose the cat. Make sure you are signed in with your Adobe ID, have cookies enabled and have deleted your cookie cache.  If you have any questions, try another browser.

  Serial number and activation support

  Guinot

• questions about the depth of Panel with little information in Photoshop

  I was looking at the Info Panel (Windows > Info) in Photoshop CS 6 recently and have a few questions about what I see here.

  1. on the information panel, the RGB values range from 0 to 32768 (15 bits) if I'm using 8-bit or 16-bit.  Why 15 bits?  It is a 2s complement thing?

  2. sometimes I see the CMYK values given as % or 100%.  Sometimes I see the number given with a point of exclamation, i.e. 100!.  I don't know what conditions cause the exclamation points.

  3. If I add a Hue/Saturation layer, the RGB values will display as two numbers, i.e. 32768/32768.

  4. If I'm in 16-bit mode, the info panel displays values of 0 to 32768 as shown above, but if I go to a Committee of color selection, values are between 0 and 255.

  5. my camera has a 14-bit A/D per channel.  If I load a RAW image from this camera in 16-bit mode, photoshop place the 14 bits in the money services businesses?  In 8-bit mode Photoshop just truncates the LSBs?

  I'm not having a problem with this, I just want to understand what is happening.

  Thanks for any idea that you can provide.

  Kevin H.

  Q #1, is 15 bits for faster computations and provide a precise integral environment.