Question about sga_target 10.2.0.5 Oracle with Windows 64 bit with 8 GB

Similar Questions

• Questions about the process of cloning in Oracle Apps

  Hello..
  
  I'm trying to clone Oracle 11i (single node) Linux applications, but with some doubts in the process... could someone please help me...
  
  I ran preclone (adpreclone.pl) scripts on both layers of DB and APPL system source... then stop apps services and target the database copy in the system... but my question comes here... they say I should be copy only files of the SUMMITS as APPL_TOP, COMN_TOP, etc. and ORACLE_HOME, IAS_ORACLE_HOME... but these TOPS and HOUSES exist within a directory as...
  

  example:
  APPL_TOP - / dev/p01/oracle/devappl
  COMN_TOP - / devc/p01/oracle/devcomn
  ORACLE_HOME - /dev/p02/oracle/devdb/9.2.0

  by note metalink (230672.1), they say it's to copy...
  [APPL_TOP]
  [OA_HTML]
  [OA_JAVA]
  [OA_JRE_TOP]
  [COMMON_TOP] / util
  [COMMON_TOP] / clone
  [COMMON_TOP] / _pages (if this directory exists)
  [806 ORACLE_HOME]
  [iAS ORACLE_HOME]

  My question is should I be creating directories like (/ dev/p01/oracle/devappl) (/ dev/p01/oracle/devcomn) and copy the TOPS and HOMES in appropriate subdirectories or just simply copy... then run the process... postclone your ideas and suggestions are welcome... Thank you...
  
  Published by: Hart on June 11, 2011 03:13
  
  Published by: Hart on June 11, 2011 03:19
  
  Published by: Hart on June 11, 2011 03:21

  your right... that's the real way, manually create the directories and copy them from the source to the target by the metalink (230672.1) note... but I'm worried that I might miss some files in the copy process... I mean are below here are the the only ones required in the process postclone... because if you see the real $ORACLE_HOME (/ dev/p02/oracle/pixdb/9.2.0) to the user oracle is missing... What about the database files? .. .is there all I could mention to facilitate the creation of directories...

  You can just copy the files in the directories devdata, lolo, devappl, devdb, devcomn.

  Also all by creating the directories in this way... If I'm going to use a new name for the instance, do I have to replace the "dev" to the new name as 'edev' or something and then start the postclone process...
  /dev/P02/Oracle/pixdb/9.2.0
  /dev/P01/Oracle/pixora/8.0.6
  / dev/p01/Oracle/pixora/IAS
  / dev/p01/Oracle/pixappl
  / dev/p01/Oracle/pixcomn

  You can use any name for the main mount (it is-to-say/u01 /... or/edev /..), just replace dev with edev for five above mentioned directories.

  Thank you
  Hussein

• Question about list tablespace temp of the oracle 12 c container

  Select con_id, name of the containers of v$.  -> 4 lines returned.

  1	CBD$ ROOT
  2	PDB$ SEEDS
  3	PDBRED
  4	PDBBLUE

  Select con_id, name from v$ tempfile;  -> 4 lines returned.

  1	/U01/app/Oracle/oradata/cdb1/temp01.dbf
  2	/U01/app/Oracle/oradata/cdb1/pdbseed/pdbseed_temp01.dbf
  3	/U01/app/Oracle/oradata/cdb1/pdbred/temp01.dbf
  4	/U01/app/Oracle/oradata/cdb1/pdbblue/pdbseed_temp01.dbf

  Select cdb_tablespaces TABLESPACE_NAME, CON_ID where nom_tablespace like '% TEMP;   -> 4 lines returned.

  4	TEMP
  3	TEMP
  2	TEMP
  1	TEMP

  Select * from v$ temp_space_header; <-why to return a row ?

  1

  TEMP

  12 c bug?

  Hello

  and here you have the answer. The dictionary table ts$ contains only the 'local' tablespaces (in your case, those of the CBD).

  FYI - the join condition of the view GV$ TEMP_SPACE_HEADER is based on the following clause:

  from ts$ ts, x$ktfthc hc where ts.contents$ = 1 and ts.bitmapped <> 0 and ts.online$ = 1 and ts.ts# = hc.ktfthctsn and hc.ktfthccval = 0
  

  The view V$ TABLESPACE is based on the control file, not the Oracle dictionary table (as mentioned in the official documentation here: http://docs.oracle.com/cd/E16655_01/server.121/e17615/refrn30277.htm#i1420852 - "V$ TABLESPACE contains an tablespace from the file of control."), but the control file (fixed table x$ kccts) lack the necessary block size information for the calculation. You can write your own query based on x$ kccts and x$ ktfthc, if you use a specific block size (in all environments and each time), but Oracle itself should be more generic, of course.

  Concerning

  Stefan

• A question about the size of Swap for Oracle 11.2

  Hello everyone
  
  I want to install Oracle Rac 11.2 on 2 Server with 22 GB of RAM each.
  
  Reading Exchange according to the requirements of the Infrastructure of grid for Linux, I found this:
  
  Between 1 and 2 GB-> 1.5 times the size of RAM
  Between 2 GB and 16 GB-> equal to the size of RAM
  More than 16 GB--> 16 GB
  
  The requirements of database for Linux 86_64 of reading:
  Between 4 and 8 GB-> 2 times the size of RAM
  Between 8 and 32 GB-> 1.5 times the size of RAM
  Over 32 GB--> 32 GB
  
  
  Then, with 22 GB, follow the requirements grid: 16 GB and database requirements: 33 GB
  
  Should what size I get?
  
  Thank you very much

  This is how I read it.

  Best regards

  mseberg

• questions about SSO and OID application on oracle EBIZ R12.0.6 ID 376811.1

  Hello guys,.
  
  IS ORACLE 10 g enterprise edition is the same identity of oracle management because I'm confused what is happening when we need to connect a SR, told us to use oracle 10g AS (10.1.3.5) but in the note it says always oracle 10g AS 10.1.4.X., which is in turn an identity management so that we need to install oracle 10gAS (10.1.3.5) then in addition install us oracle identity management consists of OSSO and OID. is this correct?
  in the reference notes 376811.1
  
  Please notify
  
  Thank you
  MN

  In this case, you need to install Oracle Identity Management 10.1.4.x only.

  Oracle 10 g (10.1.4.x) identity management downloads
  http://www.Oracle.com/technetwork/middleware/IAS/downloads/101401-099957.html

  Oracle Identity Management 10 g (10.1.4.0.1) book list
  http://docs.Oracle.com/CD/B28196_01/NAV/docindex.htm

  Make sure that you apply the latest patchsets on Oracle Identity Management and Oracle EBs servers according to the doc.

  Thank you
  Hussein

• question about old ARC files in an Oracle 10 g database

  Hello
  
  We have Oracle Database 10 g, the database is in archivelog mode and we're cold backup of the database. We would like to know, if we must restore and recovery of the database if we have a problem, we would have to do so from the last ARc file or we must apply all ARC files, we see on the EIS from v$ archived_log?
  
  Kind regards
  Beatriz.

  We must apply all ARC files, we see on the EIS from v$ archived_log?

  N ° the recovery will require the ARC from the point of leaving, the backup files. V$ archived_log contains a "history" of the older archivelogs thus list.

  So, if you have daily backups and v$ archived_log shows the entries for 7 days
  If you restore the cold SUNDAY backup you ArchiveLogs on Sunday from
  If you restore the cold WEDNESDAY backup you frome ArchiveLogs Wednesday, even though the controlfile in Wednesday backup lists the previous 7 days (starting on Thursday!) ArchiveLogs in v$ archived_log.

• Question about DVD external HD (Blue Ray) players with Tecra M5

  I have a laptop TECRA M5 (in XP), although this could be relevant to other users of laptops with no internal HD DVD players.

  Is there an external HD (e.g. USB) DVD that I could connect my laptop? Then to watch HD movies on my laptop?

  If such a thing exists would it also directly connect to a HD TV (as my laptop has no HDMI)?

  Is there a way I could exchange my internal DVD for a HD one?

  Oh boy,

  I'll show you why you _shouldnt_ think about buying an external drive to your machine.

  1. Yes, there are a LOT of external HD DVD readers, most of them are hollow connected USB
  2. you could connect it to your laptop, Yes and no doubt you could play HD DVD movies on your computer, but NOT in HD from your screen only supports a maximum resolution of 1024 x 768 pixels, but need to HD movies at least a resolution of 1280 x 720. Any sufficiently fast computer with a screen resolution of 1280 x 720 or higher is able to display HD video, even if the computers are generally not advertised as such.
  3. No, you cannot connect directly to an HD TV, I mean why Don t you then buy a HD DVD player?
  4. Yes, you could, but you are quite familiar with the computer systems to exchange a player that is integrated into your machine? If you would really spend money for the reader, you should ask then spend the extra money for a technician. ;)

  See you soon

• Question about the implementation of VLAN automatic voice with Polycom phones on a SF 300 - 24 p

  Someone at - it Setup successfully a SF 300 - 24 p to automatically assign a VLAN voice for traffic from an IP of Polycom phone? We have activated with LLDP-MED policy assigned to the port, as well as the interface configured as a trunk with the PVID defined on the VLAN data and Auto VLAN enabled.

  Hello

  Thank you for using the Cisco support community. My name is Nico Muselle and I work for Cisco Small Business Support Center.

  In response to your question, the only additional thing required on your switch is the choice of one of the below configurations:

  1. Affect the phone VLAN statically to ports connection of phones.

     or

  2. Turn them on Vlan voice (and change CoS affecting 5), and add telephony YES Polycom phones (the first 3 bytes of the MAC). You may need to add a few different Yes. This way the switch detects the phone YES and add the switchport to the Vlan voice.

  LLDP-MED network strategy as you have defined it, on the other hand, will be used to assign the VLAN on the phone automatically if you do not have to configure it manually on all phones.

  In short, you can choose one of the methods above, in combination with the LLDP-MED policy so everythings should work just fine. If it is not, please let me know.

  Kind regards

  Nico glacier
  Cisco Small Business Support Center.

• Question about the use of EM on machine with 2 active instances

  Hello
  
  As a free workout, I created 2 instances on a single machine. The machine is, server and client. I'm running Windows XP SP2, Oracle 11 GR 2 (as seen in my handful of user) and using IE7 for MS.
  
  The URL of the first instance is:
  

  https://Oracle2Day1.john.local:1158/em

  The URL for the second instance is:
  

  https://Oracle2Day1.john.local:5500/em

  If I connect to one and the same instance, then everything works fine.
  
  When I log you at first, then in the second instance, and switch back to the tab of the first instance, I find myself back at the page "user name/password / Connect as", even I don't get the page saying that I was disconnected in the first instance.
  
  Of more, if at this time, I return to the tab of the second instance, I find myself on the page "user name/password / Connect as ' for this instance too.
  
  Basically, whenever I log in proceedings and switch to tab from one case to another, it brings back me to the log in page for both instances.
  
  If I connect in one instance and do not try to connect to the second instance then everything works fine.
  
  Any ideas as to why I can't be connected to two instances at the same time? (I myself can be connected in two cases, simultaneously using SQL * more without any problem) Is there something I can do to fix this or is it "normal"?
  
  Thank you for your help,
  
  John.

  Aman... wrote:
  This is the limitation of the database console 'free' John. It can be used only one instance at a time. If you want to have a maintenance single window/console to manage the two databases, you must use the option of paid console grid .

  HTH
  Aman...

  It's a little confusing ;) If he opens the 2 consoles EM in 2 separate browsers, should not this market? ;)

  John: Can you please try that ;)

• Question about re - install the software that came with the computer

  I inadvertently deleted the controller Ethernet and Bus High Definition Audio my laptop while trying to remove the Real Player I downloaded. How can I get these? What do I need to use the recovery disk that came with the computer or y at - it another way? If I use the recovery disk will I lose data and other software on the computer?

  Thank you.

  Hello

  If you are lucky man you will be able to use the tool to clean Windows system restore.
  This tool allow you to roll back the State of the OS to the point of beginning.
  I think you can use it and try to roll back the OS to the point where you have removed these applications.

• Portege R100 - question about the installation of the USB port and Windows problems

  Hello

  I just bought a used Portege R100, but I have some problems. Of course the laptop isn't a CD or DVD, player so I tried an external DVD drive, but it did not work. What kind of device I have to install Windows (not an edition of recovery or anything like that, but a whole new windows on the formatted HARD drive)?

  I also have another problem: whenever I plug a USB device (I tried the DVD drive external and a USB keyboard) when I start the laptop, it seems to hang. At least, I am not able to type anything more; the keyboard of the laptop is dead (the point where the entrance would still be flashing in the BACK platform, but typing. sth on the keyboard isn't doing anything). It is not normal, is it?

  I also tried to get to the BIOS, but I tried various commands (F1 to F12, DEL etc.), but I couldn't access the BIOS. It would be great if someone could tell me the command for it.

  Thanks in advance for the help and sorry for the bad English, I'm not a native speaker :)

  The forum has a search function, but to help you look still these 2 wires:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23921

  Here you can see that XP installation isn't very easy, but can be done successfully

  as long as you are working in an environment with appropriate back-drivers back, you can use any kind of external (USB or pcmcia) CD player you want

  the bios is accessible by pressing ESC and the Start button

• Question about the opening of JavaScript (.js) files in Windows Explorer...

  Hello.

  I write web pages with external JavaScript files.

  When I right click on a file in Windows Explorer .js, I get a choice when selecting menu "open with...". » :

  -Microsoft (R) Windows Based Script Host

  -Microsoft Visual Studio

  -Notepad

  Nothing happens if I select the first. What is the first listed selection? Is this something that should have come with Vista?

  What to keep in mind, is that JavaScript is coded in the web pages, for example in HTML format.

  Go to a web page, right click on the white space and choose View Source and you will see the words such as JavaScript and function. If you look at the coding of the function, you should be able to recognize the commands.

  Good luck with the coding.

• Questions about Failver customer and rapid failover

  have some questions about customer and quick Faiolver of Oracle Database HA failover. Before asking these questions, I want to explain my environment. Here are the details.
  
  
  
  -We have two physical locations called "ABC" and "PQR".
  -ABC is the main site.
  -PQR is the backup site.
  -In ABC, we have the database to Oracle RAC (11.2.0.2) with two nodes.
  -In the PQR, we have only one stand-alone server (11.2.0.2) database with ASM. This isn't a RAC.
  -Data Guard has been configured between ABC and PQR and it works as expected.
  -Please note that we have a license for Active Data Guard.
  -We have products of Oracle Identity Management to ABC and PQR and they will use the RAC database as a primary database that is in the CBA.
  -We have not yet set up a Data Guard Broker.
  
  We want to achieve under objectives:
  
  
  Objective 1:
  -------
  
  Whenever primary CARS down completely, standby database becomes a primary database AUTOMATICALLY and it should allow the read/write operation.
  I guess it's called 'Fast Failover'. Please let me know if I'm wrong.
  
  Issues related to the:
  
  -To do this, I need to set up Data Guard Broker so that this standy database becomes primary when CARS go down completely with a power outage, planned or not.
  -Let's say that CARS falls does completely, how long take Data Guard Broker do standby db as primary.
  -What the client application / which is already connected to the CARS.
  -Let's DB standby became as primary and after some time if RAC comes back, keep data automatically becomes the primary role of RAC?
  
  
  Objective 2:
  --------
  
  As I explained above, all products Oracle IDM and applications to speak to the RAC database, what do know only on the RAC database, which is the main. They are not aware of the pending database.
  
  -Whenever a client session is underway with the primary database of CARS if CARS completely falls down, we would like to wait until the client session should get transferred datbase standby without losing session information. However before that happens, standby database should become primary because the client session can perform write operations.
  
  -Whenever a client attempts to connect to the primary CARS and assumes that the cab is completely down, we would like to expect from any client connections should are transferred pending database.
  However before that happens, standby database should become primary because the client session can perform write operations.
  
  According to my knowledge, above scenarios are called "client failver." Please let me know if I'm wrong.
  
  
  
  Issues related to the:
  ----------
  
  1. Please throw some light to reach above features.
  2. According to my understanding, before customer failover happens, fast failover expected has already occurred and ensure should get the switch for the main role. I guess that all this happens thanks to timeout settings. What are those.
  
  
  Could you please help?
  
  Thank you

  I didn't say that clients cannot reconnect automatically when primary fails: I meant that client sessions can generally reconnect and also keep any session state.

  Yes, they can reconnect but only to keep the session state for a SELECT statement. It is also possible with Data Guard, not only in the CARS I wrote: here's a demo with 10 g
  http://uhesse.WordPress.com/2009/08/19/connect-time-failover-transparent-application-failover-for-Data-Guard/.
  What is not possible is to maintain a session state: (INSERT/UPDATE/DELETE) pending transactions must be cancelled.

  Edited by: P. Forstmann on Dec 8. 2011 20:30

• General questions about errors in eventvwr

  Greetings.

  I have a general question about some failed modules are stored in the Windows Event Viewer.

  An error leading to the crashes some applications that I've seen several times now when supporting computer problems is something like this:
  (Windows error reporting) Fault bucket, Type 0, name of the event: PCA2, (...) P1: application.exe, (...)

  I wonder what this 'PCA2. Which is a kind of module Windows handles tasks such as allocating memory or smth. Like this? What could be the cause of these errors (physical memory problems / corrupt swap file / insufficient rights?)

  Same Question for the application falls down because of "kernelbase.dll" as in:
  (Application error) Failing application: application.exe, Version: 0.0.0.0, (...) Failed module: KERNELBASE.dll, Version: 6.1.7601.18015, (...) Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll (...)

  What is the .dll file and what could possibly cause kernelbase.dll Fault?

  The application can be a bit buggy, but I wonder what could possibly cause these accidents and if there is a way to fix these problems - or what dev did wrong.

  The two errors occur mainly on x 64 systems - especially Windows 7/vista

  Kind regards

  With application errors, the application is called everything first and the module he collaborated with is named second. Normally you should try to reinstall the application if you see not to repeat the mistakes. If this does not work, you go to the forum on the application to see if other users see the same error. There may be a bug in the application.

  The observer of the Application event log contains Information reports (event ID: 1001) for errors where the details were sent to Microsoft for review. You will find that there are corresponding to the event ID: 1000 reports errors, either in the system or Application logs. These reports are also included in the center of the Action. Center type action in the area of research above the Start button and press ENTER. Click on the arrow pointing downwards to the right of Maintenance, and then click view reliability history. The errors reported are the Red orbs with a white cross. You can search for solutions to problems, but occasionally you get a significant response from Microsoft.

  I can't tell you what it means PCA2. Google did not find a significant result. The reports themselves are not unintelligible, although I have never tried to understand the meaning of a particular report. I have extracted what, in my view, is a starting point of two reports:
  Event name: PCA2 = P1: motherboard_utility_onoffchargesetup.exe P2: 4.65.0.0

  Event name: PCA2 = P1: setup.exe P2: 11.0.0.28844

  You have the app in the boredom and the version of the file. These details have been extracted a file of information system to a computer with a card mother Gigabyte. So, you see I have a starting point, if I wanted to determine the cause of a failure.

  I will say before you go dive deep into each event ID: 1001 report that many are not easy to even begin to understand. However, they can provide useful clues.

  KERNELBASE.dll is likely to be the module with which the application works. You need to focus on the application.  KERNELBASE is probably preceded by P3 or P4 in the report?

  General remarks on the event viewer:
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Question about hdd comments

  Hello

  My name is Tigran.

  First of all excuse me for my English.

  I have a question about comments HDD.

  I have a windows 7 machine 19.ne 60 GB provisioned thin disc comments.

  Today, I delete some files from the guest operating system and I free on about 20 GB of disk space. Now in my guest os used space on disk is of about 30 GB, but in vcenter disk space is always 50 GB. I understand that thin provisioned disk space grows when add us files to this disc, what would you say to resize to the bottom of the disk space?

  Thanks in advance.

  Unfortunately a virtual disc service end increases only in size if necessary, but does not automatically decrease if less space is needed for the guest operating system. If you want or need to reduce the size of the virtual disk, would be to run VMware Converter and make a volume base conversion (rather than on the disk).

  André