question about the battery of the laptop when you do not use

Similar Questions

• Is there a need or a way to turn the pencil off the power when you do not use?

  Is there a need or a way to turn the pencil off the power when you do not use?

  Unfortunately not. The best thing is to turn off bluetooth. However, you will need to re - pair the iPad and the pencil again by plugging in the port of lightning. When not used the pencil of apple do not lose a lot of power.

• Saving ink by powering off the power when you are not using it?

  I have a HP Officjet 6700 running under Windows 7 64-bit and read that turning off your printer when you don't use to save on ink. Is this true?

  Hello

  Right, but turn off will save a bit of power. Inkjet printers need ink more when you turn very often.

  I hope this helps.

• Question about the error when you run DBUA

  Good afternoon
  
  I try to run the Database Upgrade Assistant. At the beginning of this process, I get a window with the following error message:
  

  Initialization parameter log_archive_format must contain
  %s, %t and %r.  Your current setting is "ARC%S_%R.%T".
  Update this parameter prior to upgrading the database.

  SQL * Plus, I get the following:
  

  SQL> show parameter log_archive_format;
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  log_archive_format                   string      ARC%S_%R.%T
  SQL>

  It seems to me that the log_archive_format has the required format.
  
  The Question is: My format is wrong? If so, what is the problem with him? If this is correct, what should I do to get past this error?
  
  Thank you very much for your help,
  
  John.

  Hello
  You have 3 format settings, but our opinion is not important, because it appears THAT DBUA consider as wrong format! I have never tried to put %t after the '. ' in fact. Maybe you can try with 'ARC_%s_%r_%t.arc '?
  Best regards
  Phil

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• should I turn the printer off when you are not using it?

  you just buy new printer - HP envy 5530 - need to know if I need put it off when you are not using it or if it passes in mode "sleep"?  other printers I had went to sleep mode however cannot locate this answer in the FAQ - like entry - thanks ~ ) husband

  Welcome to the mgchandler forums,

  I saw your post on want to know if you should be powered down the printer or if it won't fall in the mode 'sleep'. My best advice would be to turn off the printer by the power button if it will not be used for a period of time, for example during the night. Regards the mode "standby", the printer goes into standby after 5, 10 or 15 minutes of inactivity.

  • To change the settings for sleep mode, go to the front screen of the printer and press settings (wrench)
  • Contact preferences
  • Press the arrow down and on Standby Mode when you see
  • You can now change the time of mode 5 to 10 to 15 minutes before

  User - Guide Page 93 + 94 for Info Sleep Mode

  I hope I helped answer your question!

  Have a great Tuesday

• Question about the laptop battery and satellite L510

  I have a Toshiba Satellite L510 and find the battery moves a bit - like 2mm so be it.
  It is on the edge of the laptop, I suppose, but I was wondering if there should be no movement at all?

  Hello

  On my two laptops from Toshiba battery cannot be moved, but the battery is locked and cannot be moved or deleted.
  Your laptop satellite battery is too locked?

  By the way: when you use the notebook on the desk, this movement is irrelevant and cannot have a negative influence on the power supply for computer laptop battery s.

• technical question about the laptop LCD screen

  Hello

  I see in youtube change that a laptop screen is quiet easy.

  1 but is it dangerous to change the lamp or the laptop LCD converter when it is damaged?

  2. I know when the screen goes black and you can barely see an image in bright light you lost the lamp or the inverter, but how you can know if it is the inverter or the lamp?  because the inverter converts direct current to an electrical outlet which needs the lamp.

  Thank you

  Johan

  For assistance, contact the manufacturer of your laptop.  Thank you!

• Question about the menu item displays do not correctly the status of 'active '.

  Hello

  I've reproduced for purposes of training "Influence," tutorial site

  and my questions are the following:

  As you can see on the site

  Homepage 

  (1) the order of top menu contact us, has the same features as the other components (speakers, time and place) - see picture attached.

  However, when the user clicks about us contact.

  the menu item is not barred to the outside like any other.

  I checked the condition of the assets is correct.

  The anchor link is placed on the foot of page, designed on the page A-master separately from the Home Page.

  I tried to place the anchor to the Home Page at the last point before the beginning of footer, but no result.

  (2) also if you do a simple test, you will see that by clicking on the heading "Contact us", the menu Time & Place is highlighted

  and if you click on the 'Top' menu, or if you are in "Time and place" content and you click on 'Top', the 'Speakers' menu is also highlighted.

  Please note that this behavior is also indicated to the site of origin INFLUENCE ...

  What I am doing wrong?

  BR

  Nektarios

  Replied here: https://forums.adobe.com/thread/2063776

• How auto turn off the screen of the laptop when you use the external monitor?

  I don't wan turn on laptop screen and my external monitor at the same time. So is it possible to do automatic screen of my laptop to turn off as soon as I plug my external monitor to my laptop vga cable (without pressing Fn + F2 keys)?

  Please help me.

  Thank you.

  I don't know if it's possible, but you could try to go into display settings and set an external because it is main if possible display and then disable the laptop with Fn + F2 but idk if it will remain inactive if you portable computer power, then on again :/

  Update: how to do this, right-click on the screen area and select the screen resolution while having the connected external display then of you will find a drop down a 3rd or a 4th do not remember but inside, you'll find stuff like show desktop on the screen 1 or 2 to find out what your external display screen number is and apply it to this form then computer laptop screen should turn black as it is turned off and you will see desktop area is on external display so I hope that this has resolved your request.

  PS don't forget to press Bravo if it helped

• "Internet Explorer cannot display the webpage" when you try to use the CAC reader

  When I try to open a session on the site of the army AKO with my CAC reader and card chip that I allowed to choose my credientials.  When I hit enter I get "Internet Explorer cannot display the webpage".  My internet provider is Mediacom.  I can log on with the same drive ACC when I use a Web service provided by a hotel close to my arsenal.  Where is the conflict?  Mediacom IT did not.

  Hi TommyZB,

  Welcome to the Microsoft answers site.

  ·         What is the version of Internet Explorer installed on the computer?

  ·         What is the operating system installed on the computer?

  ·         Is this the same computer \laptop that you use to connect to the site?

  ·         The problem is specific to this Web site or with other sites as well?

  You can try to add this site to the trusted sites and check.

  1. open Internet Explorer.

  2. click on tools.

  3. click on Internet Options.

  4. click on the Security tab.

  5. click on Trusted Sites

  6. click on Sites.

  7. Add Web site.

  8. click on OK.

  Now, check if you are able to connect to the site.

  This could be a problem with the settings of Internet Explorer on the computer; You can try to optimize internet Explorer settings and check, follow the procedure described in the link below:

  How to optimize Internet Explorer: http://support.microsoft.com/kb/936213

  Try disabling the security software and firewall temporarily on the computer and check. Make sure that enable the security software on the computer.

  Understanding Windows Firewall settings: http://windows.microsoft.com/en-US/windows7/Understanding-Windows-Firewall-settings#section_4

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Warning it can influence on the computer when you try to use the Flash Player

  Original title: Flash Drive case

  I just started using the external drive and flash drive to increase the PC space.  I tried to remove some files of music from the flash drive. Got a warning box that if I continue I can have an impact on the computer or the software. If I continue. If I'm stuck with a flash drive with unusable area?

  Hi Russ Alan,

  You will get a message to Scan Flash and continue when the Flash drive is infected.

  When you get the message scanner the Flash disk, you can try to scan and continue.

  You can also run a scan on your computer.

  Check out the link:

  http://OneCare.live.com/site/en-us/default.htm?s_cid=SAH

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Compaq Presario CQ56 No.: Is it necessary maintain the battery inside my laptop if I do not use it?

  

  Spoiler (Highlight to read)

  I was wondering if I can continue to use my computer without the battery.  I keep it inside the computer, but now is at 89% and weak.  I always use it with the AC adapter at home and rarely unplugging it for the use of the battery, the battery seems to weaken.  So should I take the battery out of the computer and just use the adapter?  Help!

  I was wondering if I can continue to use my computer without the battery.  I keep it inside the computer, but now is at 89% and weak.  I always use it with the AC adapter at home and rarely unplugging it for the use of the battery, the battery seems to weaken.  So should I take the battery out of the computer and just use the adapter?  Help!

  Hello

  Sorry, it just means maybe machine die, unusable, as a brick.

  Kind regards.

• Consider purchase of Wacom Cintiq 27 HD Touch - Questions about the tactile feature in Photoshop and Lightroom

  I'm considering buying a 27 HD Touch of Wacom Cintiq monitor. I have a few questions about the two programs Adobe and their use of the 'touch' feature - Photoshop CS6 and Lightroom 5.7 running on Windows 7.

  1 problems related to touch a feature in Lightroom and Photoshop CS6 and 5 resolved that you see on the forums of Wacom a year ago?

  2. If so, is there sufficient value gained through the tactile feature in Photoshop CS6 and Lightroom 5 to justify the $500 price difference between the Cintiq 27 HD vs Touch HD? (I realize that this is a subjective question based on the abundance of its cash).

  3. I intend to stay with CS6 as long as possible to avoid a monthly subscription, BUT I wonder if buy the Touch HD can provide additional key features in future releases of these products that do not exist currently. (It is a pie in the kind of sky in question).

  Thank you!

  Kent

  Support for Photoshop Touch is added by CC 2014.2.2.  However as the Pro Intuos Wacom tablets with touch can be used with earlier versions of Photoshop and the Wacom Tablets Configurator can custom features can be used with Photoshop touch tablets.  I use LR but I don't know that the same thing would be true for her. You can configure the setting for many applications. The device driver knows which application its interfacing with and uses the parameter set for each...

  I have disable most of touch when using Photoshop.  The main reason why I have a Tablet is Photoshop Brush tools. Like Eraser, clone stamp, etc, nothing is better then a pen when it come to create the layer mask.  For most programs, I always use a mouse and I use the keyboard, the mouse and the pen with Photoshop...

  I never wanted a Cintig I do not have my hand between my eyes and the work. I'm not an artist.

• Question about the EDT

  Hello world
  
  Here my question: I have to write a little something on the EDT and SwingUtilities use to avoid common problems with the use of Swing. Of course, to my knowledge, I wrote a small example using a progressBar to show how it does not work when you are not using SwingUtilities:
  

  import javax.swing.JDialog;
  import javax.swing.JProgressBar;
  
  public class UITesting{
      public static void          main                                            ( String[] args ) {
          JProgressBar    jProgressBar    =   new JProgressBar(0, 100) ;
          jProgressBar.setValue(0);
          jProgressBar.setStringPainted(true);
  
          JDialog         dialog          =   new JDialog() ;
          dialog.setSize(400, 70) ;
          dialog.setContentPane(jProgressBar) ;
          dialog.setLocationRelativeTo(null) ;
          dialog.setVisible(true);
          
          int flag = 0 ;
          for (int i = 0 ; i < 100000 ; i++) {
              System.out.println(i);
              if ( i%1000 == 0 ) {
                  jProgressBar.setValue(++flag);
                  System.out.println("Increase ProgressBar " + flag);
              }
          }
      }
  }

  And surprise (at least for me)... it works... means that my ProgressBar increases well...
  
  So I write an example more closely to reality
  

  import java.awt.event.ActionEvent;
  import java.awt.event.ActionListener;
  import javax.swing.JButton;
  import javax.swing.JDialog;
  import javax.swing.JPanel;
  import javax.swing.JProgressBar;
  
  public class UITesting{
      public static void          main                                            ( String[] args ){
  
          final JProgressBar    jProgressBar    =   new JProgressBar(0, 100) ;
          jProgressBar.setValue(0);
          jProgressBar.setStringPainted(true);
  
          JButton         start           =   new JButton("Start") ;
          start.addActionListener( new ActionListener() {
  
              public void actionPerformed(ActionEvent e) {
                  int flag = 0 ;
                  for (int i = 0 ; i < 100000 ; i++) {
                      System.out.println(i);
                      if ( i%1000 == 0 ) {
                          jProgressBar.setValue(++flag);
                          System.out.println("Increase ProgressBar " + flag);
                      }
                  }
              }
          }) ;
  
          JPanel          panel           =   new JPanel() ;
          panel.add(start) ;
          panel.add(jProgressBar) ;
  
          JDialog         dialog          =   new JDialog() ;
          dialog.setSize(400, 70) ;
          dialog.setContentPane(panel) ;
          dialog.setLocationRelativeTo(null) ;
          dialog.setVisible(true);
      }
  }

  This time it's perfect, the ProgressBar control does not work, it goes from 0 to 100% at the end of my loop and button freeze during the process, I can illustrate my point and introducing a SwingUtilities using... But why it works in my first example?
  
  I know that a call to an ActionListener in a Swing component to ensure that the specified code is executed in the EDT, but I still can't get it? Can someone help me understand this?
  
  THX in advance,
  
  yannig
  
  Published by: yannig March 24, 2011 10:57

  yannig says:
  This time it's perfect, the ProgressBar control does not work, it goes from 0 to 100% at the end of my loop and button freeze during the process, I can illustrate my point and introducing a SwingUtilities using... But why it works in my first example?

  The main method is called on the 'hand' - thread of the JAVA virtual machine, which is not on the EDT. A search on "Concurrency tutorial Java Swing" for more information.

  In short, the small, good Swing programs is something like:

  import java.awt.EventQueue;
  import javax.swing.JOptionPane;
  
  public class HelloWorldSwing {
      public static void main(String[] args) {
          EventQueue.invokeLater(new Runnable() {
              public void run() {
                  JOptionPane.showMessageDialog(null, "Hello world!");
              }
          });
      }
  }
  

  Your first programs works because you loop is on the main thread, while the second is on the EDT. Here it blocks all the paint if you don't see any progress.