Question about the cmdlet Get-VIProperty (ideally oriented @ LucD)

Similar Questions

• Question about the cmdlet set-hard drive

  Hi out there,.

  I would like to move a group of new data warehouses vmdk using the cmdlet set-hard drive.

  But I want to start moving just a svmotion operation at a time.

  How could I get the id of the task of the vcenter svmotion operation initiated by game-hard drive, so that I can use wait-job to wait to complete the svmotion operation to start the following?

  any idea of... tips are welcome...

  concerning

  Hello

  Welcome to the VMware communities.

  The cmdlet Set - hard drive doen't have a parameter - RunAsync, as for example, the Move-VM cmdlet. This means that the each hard drive Set command must finish before the next command can begin. To this effect, you don't have to perform the synchronization of tasks yourself when you use the cmdlet Set-hard drive.

  Best regards, Robert

• I posted a question about the FBI virus. How to get rid of him. I ' v was only one answer. Someone to give here can help me with that. I am 62 and although I use my high tower dyly I'm not a COMPUTER technician.

  I posted a question about the FBI virus. How to get rid of him. I ' v was only one answer. Someone to give here can help me with that. I'm 62, and I'm not a computer genius. I have some [eratly helpgetting need to get rid of the virus of the FBI. MS antivirus and scan not work or identify it.  Help, please! 1

  Emisoft is a desperately slow download, as I just discovered.

  You can simply run Malwarebytes and it...

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Got a legal question about the installation of Adobe Photoshop Elements.  How to get help from Adobe using a chat session?

  Got a legal question about the installation of Adobe Photoshop Elements.  How to get help from Adobe using a chat session?

  AdobeTomFaith

  If your program is Photoshop Elements, then you have posted in the wrong forum. Some how your son got posted in the Forum Adobe Premiere elements (video editing). Please re-post your thread in the Adobe Photoshop elements Forum.

  Photoshop Elements

  Wherever your son is, please include Adobe Photoshop Elements version and operating system and the description of the installation problem (error messages, stage of failure, etc.)

  Support Adobe seems to be limited to Adobe cat and is classically limited to the current version which is 13. Then, you the best avenue to success is likely to be through the Adobe Photoshop elements Forum. But that shouldn't stop you trying to determine what kind of support you can get from Adobe cat on your question.

  I would offer this link that is specific for Adobe Chat download and installation

  Contact the customer service (this is not the same destination as shown in a previous post in your thread)

  This link is specifically designed for

  Photoshop Elements

  Download, installation, setting up

  Download and installation

  Panel discussion

  (18:00 - Friday 7 pm Sunday)

  Thank you.

  RTA

• I have a question about the delivery of the school.  If I start paying $19.99 a few months before that I control, I keep getting this price for the rest of the year?  Or will I stuck having to pay $50.00 per month until the contract is in place?

  I have a question about the delivery of the school for creative cloud.  If I start paying $19.99 a few months before that I control, I keep getting this price for the rest of the year?  Or will I stuck having to pay $50.00 per month until the contract is in place?

  Student discounts are good for a full year, without worrying if you drop out during this period.

  Mylenium

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Question about the new Yoga 10 HD +.

  Hello

  A few questions about the new Yoga 10 HD + that I hope you can answer.

  I bought the former model, last year. Love the design and long battery life, but a few major questions made me return.

  • Somewhere that I've read that it can not read NTFS on USB so I guess that's the same thing with a NTFS formatted microSD card?
  • Can it read exFAT formatted microSD cards?
  • Anyone who has questions about the audio via bluetooth?
    (I know that BT is not exactly High End HiFi but the old 10 Yoga for some obscure reason - most likely a driver problem which nobody cared to fix - rang * very * worst with visibly distortion while both my phone and a Tablet noname cheap I have zero about fidelity - any of my devices bluetooth audio) I tried aptX or not)

  So to avoid buying it back it also I really I would like to see if I can get my questions answered before buy you.

  While I love the form factor and long term issues above are only two Mayor dealbreakers for me. Bad audio quality = no joy listen to spotify, local etc. MP3s. not of NTFS or exFAT = some great movies.

  My old noname android Tablet really could use an upgrade so I'm really curious it may be, or I should watch the competition and will be form factor and battery LIFE.

  Thanks in advance.

  EDIT:

  If it does not support NTFS or exFAT on microSD card have someone at - he tried ext3 or ext4?

  I mean with Linux Android root, it should be a no-brainer to support at least when it comes to royalties unlike NTFS or exFAT where it * might * have some trouble with Microsoft.

  I used a USB through a USB OTG cable. NTFS or exFAT have been recognized by the Tablet PC. FAT32 is seems to be the preference.

• Just a quick question about the appearance of the cluster

  Hello, this is Matthew, just a quick question about the appearance of the cluster

  Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...

  What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".

  Is there a quicker way to deal with?

  THz so much!

  You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Ask questions about the functionality of EA8500 MU-MIMO

  Dear Linksys

  I bought EA8500, and it arrived today.

  I have two questions about the functionality of MU-MIMO of EA8500 AP.

  1. I want to compare the performance between SU-MIMO and MU-MIMO, but there is no option to control this feature in the router admin page. Is that one of the possible ways?

  2 EA8500 supports 1733 Mbps wireless speed, but it resembles the speed of 1 Gbps ethernet cable.

  This router supports really speed 1 Gbps ethernet? or y at - it an option to support more throughput as the aggregation of links?

  Thank you

  Hi, hyeonu. For your first query, it is not possible because there is no option to disable the feature of MU-MIMO on your Linksys EA8500 router. In addition, with regard to your second, you can get a higher throughput of 1 Gbps since this is the maximum capacity of your ethernet connection.

• Person to contact with questions about the presentation of the app world

  If I have a question about the app that I submitted, anyone knows how do I contact someone about this? I can't find anything on the site and respond to notification emails gets me nowhere.

  Hey miss breeder,.

  that will be tough. If you browse the App World his hell out there because of the new development forums and people have a lot of problems with it. I've read people were emailing RIM all week and no responses were received. But if you post a question here MShom (one of the moderators) usually responds in a timely. The support email is [email protected] I believe. Good luck!

• HTML (Web), I have a question about the models.

  Hello CC animate developers.

  New features are really good.

  HTML (Web), I have a question about the models.

  <! DOCTYPE html >

  < html >

  < head >

  < meta charset = "UTF-8" >

  < title > $TITLE < /title >

  < meta name = "ad.size" content ="width = $WT, height = $HT" > "

  $CREATEJS_SCRIPTS

  $SCRIPT_START

  var canvas, stage, exportRoot;

  function init() {}

  $CJS_INIT

  }

  $PLAYSOUND

  $SCRIPT_END

  < script type = "text/javascript" >

  "clickTAG" var = "";

  < /script >

  < / head >

  < onload = "init (); the body"style =" background-color: #D4D4D4; " margin: 0px; ">

  < a href = "javascript:window.open (window.clickTag)" >

  < div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid #000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >

  < canvas id = "$CANVAS_ID" width = "$WT" height = "$HT" style = "background-color: $BG" > < / canvas >

  < /a >

  < / body >

  < / html >

  In the example above, the model;

  < Meta name = "ad.siz of" content = "width = $ WTI height = $ HT" > "

  and

  < Div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid # 000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >"

  I use labels. But these tags in the template and import, it gives an error does not occur.

  I think it was a mistake. I want to help in this regard.

  $ HT or Properties $WT , I get an error when I use elsewhere.

  I think I should be able to use anywhere I want.

  The same problem here - I worked around by some DRM models with different values of ad.size, but it's a solution quite short-seight

  Also - you are not able to create the model with transparent background by removing style = "" background-color: $BG ' as it also throws errors - is the only solution that I managed to get updates style = "background-color: $BG; background: none; ", but it's a really bad way of coding things.

  It would be really great to have freedom in changing patterns.

• Where should questions about the JDEV/ADF positions?

  Hello

  Where should questions about the JDEV/ADF positions?

  JDeveloper and ADF or

  JDeveloper and ADF?

  I found there may be some different advantageous:

  https://forums.Oracle.com/message/11109674?TSTART=0#11109674

  Thank you.

  Well, the other forum you mentioned is the Korean equivalent of the English forum.

  You have already discovered, it is not controlled to many users. I didn't know that it exists at all.

  In general it is to you where you ask your questions. All for one here are driven by the community and some employees of the Oracle, you cannot wait has answered all your questions. If you really need to answer you go through paid support.

  A tip for getting help is to provide a well-defined use cases, information relating to your environment and documented code showing what you have already tried.

  Timo

• Help with the cmdlet "get-floppydrive.

  Hey all

  Need help please? I'm trying to create a little script to check if a virtual machine has a floppy drive. I had a quick glance at the cmdlet GET-floppydrive and pretty much know how to check the configuration to a floppy disk "connected" (i.e. of connection state to connect to poweron e.t.c). I want to know is how an abouts to go check if a floppy drive is period

  I thought it might be something like that, but I think that its probably wrong.

  $vm = get - vm server1

  If ($vm.floppydrives - eq $True) {}

  Write to $vm.name

  }

  Any ideas?

  Munster

  You were near.

  $vm = get-vm server1
  
  if ($vm.floppydrives){
  Write $vm.name
  }
  

  You actually test it this way, what if $vm.floppydrivers is equal to $null or not.

  If there is no floppy drives that the property will be $null and the test will evaluate to $false.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• A few Questions about the advanced Actions window

  Hello

  I have a few questions about the progress of the Actions (using the version of track CP7)

  1. What is the function of the action to "continue?"   Out of the peak action and advance the playback cursor?

  2. What does mean this comment "Nested calls to action advanced is a nice improvement."? Is the advanced decision at the top of a page of action tabs?

  3. What is the function of the option "custom" in the IF statement - "preform action if - custom", it doesn't seem to do anything for me?

  4. where can I get information about the timeline / playhead interaction with advanced actions, i.e. where the playhead is going again at the beginning of the slide. slide custom question - display button, e.g. verification of responses, comments - when all the objects are at the beginning of the timeline. I'm looking more for the read head of infromation functionality rather than how to implement this type of question.

  Thank you

  Donal.

  Continue: If an advanced standard action is triggered by a button, this will not trigger the playback head. If you want out, you can use continues. Continue can also be a choice in a conditional action, when one orders branching has nothing to special, but in advance. Continuous is also the "dummy" statement/command (this is the official name of a line in the dialog box advanced actions) If a statement has become unusable due to some reasons, it will be replaced by continue

  There is no nested call stocks advanced possible right now, one of my many feature requests. It would be sort of a subroutine that you can use over and over again, instead of having to create each time when necessary.

  A decision is one of the conditions to be an advanced conditional action. They allow to create more complex actions, as a loop or arrays are not possible. All decisions are executed in sequence and always.

  Custom: is a combination of or but it is rather limited, because you cannot use parentheses.

  I guess you'd better visit my blog if you want to learn more about the advanced actions.

  http://blog.lilybiri.com/

  I also did several Webinars on stocks advanced, last this afternoon (on the sharing of the actions) for Adobe. They are all available on request.

  Lilybiri