Question about the features of the browser inner in the storm.

Similar Questions

• Questions about the storm of scrolling

  Hey all,.

  I'm currently porting a project I wrote for Trackball BlackBerrys above storm using the API 4.7.  I'm having a lot of problems with scrolling.  In my project of trackball, that I have three screens that need to scroll and my version of Storm none of the screen are the scroll correctly.  I hope I can get some advice on what needs to be implemented on the storm to get the scrolling to work properly.

  Overview of the main issue:

  I have a screen that has 3 managers on that.  On this screen the upper and lower managers need to stay in the same position on the screen.  Middle extends from VerticalFieldManager and contains a large number of custom fields (varies depending on the field how much user generated).  Each of these fields is focusable.  The constructor for VerticalFieldManager calls:

  Super(Manager.VERTICAL_SCROLL |) Manager.VERTICAL_SCROLLBAR);

  On the Trackball version just scroll with the trackball to select all of the fields that has been added to the screen.  On the storm version scroll doesn't work if you select a field that is partially hidden.  Once you use this to achieve you cannot select fields that are not on the screen to start (i.e. everything that is below the initial load of the screen).

  The functionality of typical scrolling where you just touch the screen and move your finger up and down does not at all.  If you do this it simply changes with a focus on the fields that are displayed (to access any scrolling, you must select a field that is partially off the screen or behind the Fund Manager).  I have a NullField which is active at the top and bottom of the Manager, but it still will not allow me to scroll.

  If anyone can give me advice on how to fix this I would really appreciate it... I can't seem to find any documentation that implements really shows how to properly scroll on a storm.

  Thank you in advance.  If anyone needs more information let me know.

  -Spencer

  Corrette, you set the scope to 80% of the screen.

  Virtual measurement must be set to the actual height (i.e. the total height of all the fields)

  http://www.BlackBerry.com/developers/docs/4.0.2api/NET/rim/device/API/UI/Manager.html#setVirtualExte...

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• Consider purchase of Wacom Cintiq 27 HD Touch - Questions about the tactile feature in Photoshop and Lightroom

  I'm considering buying a 27 HD Touch of Wacom Cintiq monitor. I have a few questions about the two programs Adobe and their use of the 'touch' feature - Photoshop CS6 and Lightroom 5.7 running on Windows 7.

  1 problems related to touch a feature in Lightroom and Photoshop CS6 and 5 resolved that you see on the forums of Wacom a year ago?

  2. If so, is there sufficient value gained through the tactile feature in Photoshop CS6 and Lightroom 5 to justify the $500 price difference between the Cintiq 27 HD vs Touch HD? (I realize that this is a subjective question based on the abundance of its cash).

  3. I intend to stay with CS6 as long as possible to avoid a monthly subscription, BUT I wonder if buy the Touch HD can provide additional key features in future releases of these products that do not exist currently. (It is a pie in the kind of sky in question).

  Thank you!

  Kent

  Support for Photoshop Touch is added by CC 2014.2.2.  However as the Pro Intuos Wacom tablets with touch can be used with earlier versions of Photoshop and the Wacom Tablets Configurator can custom features can be used with Photoshop touch tablets.  I use LR but I don't know that the same thing would be true for her. You can configure the setting for many applications. The device driver knows which application its interfacing with and uses the parameter set for each...

  I have disable most of touch when using Photoshop.  The main reason why I have a Tablet is Photoshop Brush tools. Like Eraser, clone stamp, etc, nothing is better then a pen when it come to create the layer mask.  For most programs, I always use a mouse and I use the keyboard, the mouse and the pen with Photoshop...

  I never wanted a Cintig I do not have my hand between my eyes and the work. I'm not an artist.

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Ask questions about the functionality of EA8500 MU-MIMO

  Dear Linksys

  I bought EA8500, and it arrived today.

  I have two questions about the functionality of MU-MIMO of EA8500 AP.

  1. I want to compare the performance between SU-MIMO and MU-MIMO, but there is no option to control this feature in the router admin page. Is that one of the possible ways?

  2 EA8500 supports 1733 Mbps wireless speed, but it resembles the speed of 1 Gbps ethernet cable.

  This router supports really speed 1 Gbps ethernet? or y at - it an option to support more throughput as the aggregation of links?

  Thank you

  Hi, hyeonu. For your first query, it is not possible because there is no option to disable the feature of MU-MIMO on your Linksys EA8500 router. In addition, with regard to your second, you can get a higher throughput of 1 Gbps since this is the maximum capacity of your ethernet connection.

• How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  Feel free to change the title

  How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  You're talking about Facebook?

  Try the gyration of the Secure Browsing

  http://www.Facebook.com/help?page=1079

• Person to contact with questions about the presentation of the app world

  If I have a question about the app that I submitted, anyone knows how do I contact someone about this? I can't find anything on the site and respond to notification emails gets me nowhere.

  Hey miss breeder,.

  that will be tough. If you browse the App World his hell out there because of the new development forums and people have a lot of problems with it. I've read people were emailing RIM all week and no responses were received. But if you post a question here MShom (one of the moderators) usually responds in a timely. The support email is [email protected] I believe. Good luck!

• HTML (Web), I have a question about the models.

  Hello CC animate developers.

  New features are really good.

  HTML (Web), I have a question about the models.

  <! DOCTYPE html >

  < html >

  < head >

  < meta charset = "UTF-8" >

  < title > $TITLE < /title >

  < meta name = "ad.size" content ="width = $WT, height = $HT" > "

  $CREATEJS_SCRIPTS

  $SCRIPT_START

  var canvas, stage, exportRoot;

  function init() {}

  $CJS_INIT

  }

  $PLAYSOUND

  $SCRIPT_END

  < script type = "text/javascript" >

  "clickTAG" var = "";

  < /script >

  < / head >

  < onload = "init (); the body"style =" background-color: #D4D4D4; " margin: 0px; ">

  < a href = "javascript:window.open (window.clickTag)" >

  < div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid #000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >

  < canvas id = "$CANVAS_ID" width = "$WT" height = "$HT" style = "background-color: $BG" > < / canvas >

  < /a >

  < / body >

  < / html >

  In the example above, the model;

  < Meta name = "ad.siz of" content = "width = $ WTI height = $ HT" > "

  and

  < Div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid # 000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >"

  I use labels. But these tags in the template and import, it gives an error does not occur.

  I think it was a mistake. I want to help in this regard.

  $ HT or Properties $WT , I get an error when I use elsewhere.

  I think I should be able to use anywhere I want.

  The same problem here - I worked around by some DRM models with different values of ad.size, but it's a solution quite short-seight

  Also - you are not able to create the model with transparent background by removing style = "" background-color: $BG ' as it also throws errors - is the only solution that I managed to get updates style = "background-color: $BG; background: none; ", but it's a really bad way of coding things.

  It would be really great to have freedom in changing patterns.

• A few Questions about the advanced Actions window

  Hello

  I have a few questions about the progress of the Actions (using the version of track CP7)

  1. What is the function of the action to "continue?"   Out of the peak action and advance the playback cursor?

  2. What does mean this comment "Nested calls to action advanced is a nice improvement."? Is the advanced decision at the top of a page of action tabs?

  3. What is the function of the option "custom" in the IF statement - "preform action if - custom", it doesn't seem to do anything for me?

  4. where can I get information about the timeline / playhead interaction with advanced actions, i.e. where the playhead is going again at the beginning of the slide. slide custom question - display button, e.g. verification of responses, comments - when all the objects are at the beginning of the timeline. I'm looking more for the read head of infromation functionality rather than how to implement this type of question.

  Thank you

  Donal.

  Continue: If an advanced standard action is triggered by a button, this will not trigger the playback head. If you want out, you can use continues. Continue can also be a choice in a conditional action, when one orders branching has nothing to special, but in advance. Continuous is also the "dummy" statement/command (this is the official name of a line in the dialog box advanced actions) If a statement has become unusable due to some reasons, it will be replaced by continue

  There is no nested call stocks advanced possible right now, one of my many feature requests. It would be sort of a subroutine that you can use over and over again, instead of having to create each time when necessary.

  A decision is one of the conditions to be an advanced conditional action. They allow to create more complex actions, as a loop or arrays are not possible. All decisions are executed in sequence and always.

  Custom: is a combination of or but it is rather limited, because you cannot use parentheses.

  I guess you'd better visit my blog if you want to learn more about the advanced actions.

  http://blog.lilybiri.com/

  I also did several Webinars on stocks advanced, last this afternoon (on the sharing of the actions) for Adobe. They are all available on request.

  Lilybiri

• Question about the tools Panel...

  I have a question about the Panel edge tools animate:

  In the future, edge animate will have a rich set of drawing tools? At the moment, so wanted to have a symbol, lets say a 'dog', I would have to draw everything first in Illustrator or Photoshop, and then import it into Edge animate (because EA basically allows me to draw rectangles and circles only). In future versions, will there be tools like 'Pen tool' or 'Gum' and other drawing tools know Flash Professional to create symbols?

  Thank you

  JH

  Hi JH,.

  Sorry, but we can't comment specifically about whether or when any functionality in the future versions of edge animate. What we can do, is listen to feedback from our users, and to add feature requests for the EA team who can be considered for future versions of edge animate.

  When new releases are published, there is also a list of the new features added... so stay tuned!

  Thank you

  Joe

• I have a question about the functionality of Oracle Identity Manager...?

  Hi friends
  I have a question about the features of Oracle Identity Manager.
  Here's my question:
  Self-management is possible network passwords (reset / unlock) with Oracle Identity Manager 9.1.0.2
  
  Very grateful.

  What Kevin suggested this means that you are managing accounts and their password by IOM. If your condition is the same then follow:

  Re: error during password reset using the self-service portal

• Questions about the stores in iProcurement

  All,
  
  I have a few questions about the implementation of iProcurement stores-
  
  1 oracle comes seeded with 2 stores "Backend" and "Exchange.Oracle.com. We do not have the use of these stores. I don't see an option to turn them off. Is it advisable to delete them? They occupy unnecessary space and are seen first. I read this on Metalink Note ID 429470.1 - "NOTE: while the value can be changed, it is highly recommended to not under any circumstances ever remove"Main store"page stores to manage content in iProcurement catalog administrator responsibility.» Do not know why.
  
  2. we have a Punchout for Dell U.S. catalog store and a catalog of information for Dell International. Buyers of Dell are iProcurement to each punchout to place their orders from Dell for the USA (shopping cart returns to iProcurement) - or - just use the store Dell International to go to an external URL and place their orders here (who do not return to iProcurement). What we see is - when the user clicks on the icon Dell us, it is taken directly to the URL of the PunchOut of Dell, but when he clicks on the Dell International icon, he was first taken to the list of catalogs available to the store (only 1 available catalog) and the user must then click again on the link Dell International. Is there a way to configure the Dell International icon to behave the way behaves in the Punchout icon - i.e. directly take the user to the Dell page without a need to show the list of catalogs.

  Hey,.
  To answer your Questions
  1. you can always delete those either if you want to... The reason why the link Meta Notes say not only not to delete the main store is
  i. because main store has all of the Local content in iProcurement (i.e. If you have any installation of items in the inventory you and them Module iProcurement Enabled (IE can be purchased at iProcurement) and any other article of local catalogues/categories Loaded using the BULK LOADING in iProcurement is also removed.)
  II. you can always delete the information Exchange Oracle store if you do not use.
  I would advise so do not remove the main store. Instead, you can change the sequence of the display of the stores you iProcurement Page.
  Browsing ==> Internet shopping Catalog Admin (RESP) ==> eContent crib ==> content management ==> stores ==> press the update sequence and make sure that the sequence number for main is superior to any other store so that the hand store falls last in the House of iProcurement Page

  2.i don't think that there is no option to do this. but you can always open an SR with Oracle about it and ask this question\

  hope that answers your Question.

  Thank you
  SANTU

• Question about the guest of dashboard and column

  My question about the dashboard and column prompt:
  
  
  (1) prompt dashboard usually work with only for columns that are in the topic area. In my report, I have created some of the columns that are based on other columns. As I have the daysNumber column that is based on two other columns, because it calculates the difference between two dates. I can't find this column invites when I create dashboard. I need to make a guest on this column.
  
  (2) to one of the column, I have only two values 1 and 0. When I create a prompt for this column, is possible that falling of drop down it displays 'Yes' of 1 0 and 'No' and always filter the request?

  Hello...

  I forgot to tell you one thing... but performance wise... If you create the column in RPD itself, it is good and easy to maintain.
  If you want this feature also... once again you choose directly the column in the area of topic... ;)

  Thank you & best regards
  Kishore Guggilla

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.