question about the re-installation of purchased cs4

Similar Questions

• vRA 7 - questions about the SQL installer

  So we are trying on a new installation of vRA 7 in the lab environment.  I installed a new SQL Server and installed SQL 2014 with all faults (standard).

  During the installation process of vRA, however when I get to the validation of SQL I get this error:

  • Lab - vra - iaas.ad.he - biotechnical (SQL Server: lab-sql01)
  • Another instance of the component is already installed on this server.

  I don't understand what this is saying.  I was not supposed to install SQL?

  Just do an audit of the Programs window in Control Panel. This message indicates that you tried a facility previously and there are a few artifacts on area lab - vra - iaas.ad.he - biotech

  
  

  Grant

• EM12c, improvement of the system of two - Questions about the post-installation steps

  Hi DBA:
  I use two system of EM11.1 process and have updated the SGD. Immediately after the set SGD to level, I went three agents. The agents take on a cluster. I have completed the tasks of post-upgrade deferred Data Migration and the Migration of the accumulated data. Finally, I registered offshore on migration for these three agents and everything seems * fine. My question:
  
  I spent a second set of officers who support another cluster. Is it true that each migrated agent calls for a fresh run of deferred employment data Migration and Migration of the accumulated data?
  
  Thank you
  
  Laura Sallwasser

  Yes, as and when you put agents in batches of the accumulated data Migration task is triggered. To better understand this concept:

  in the approach to upgrade 2-System, you can choose to spend your Management Agents in phases. When a set of Management Agents are passed to the, they start to download data on their hosts and their targets in the improved management repository, while those who are not switched yet, continue to download data from their hosts and the former repository of management targets. Therefore, earlier versions of the Management Agents coexist with those upgraded when only some of them have passed, and in such circumstances, the data are transferred to the former repository of management as well as the other at some point. However, note that a Management Agent only represents a host at some point, so coexistence does not two Agents of management on the same host. It shows only an earlier version of the Management Agent followed by a crowd who cohabits with a upgraded Management Agent, followed by another host.

  When you swtich in the next series of Management Agents in the next phase, although they start to load data into the repository of improved management, the data downloaded to the old management repository before be toggled continue to exist in the repository of the old management.

• Got a legal question about the installation of Adobe Photoshop Elements.  How to get help from Adobe using a chat session?

  Got a legal question about the installation of Adobe Photoshop Elements.  How to get help from Adobe using a chat session?

  AdobeTomFaith

  If your program is Photoshop Elements, then you have posted in the wrong forum. Some how your son got posted in the Forum Adobe Premiere elements (video editing). Please re-post your thread in the Adobe Photoshop elements Forum.

  Photoshop Elements

  Wherever your son is, please include Adobe Photoshop Elements version and operating system and the description of the installation problem (error messages, stage of failure, etc.)

  Support Adobe seems to be limited to Adobe cat and is classically limited to the current version which is 13. Then, you the best avenue to success is likely to be through the Adobe Photoshop elements Forum. But that shouldn't stop you trying to determine what kind of support you can get from Adobe cat on your question.

  I would offer this link that is specific for Adobe Chat download and installation

  Contact the customer service (this is not the same destination as shown in a previous post in your thread)

  This link is specifically designed for

  Photoshop Elements

  Download, installation, setting up

  Download and installation

  Panel discussion

  (18:00 - Friday 7 pm Sunday)

  Thank you.

  RTA

• Question about the purchase of policies in China for commercial purposes

  I have several questions about the purchase of policies. Our company is in CHINA

  1. we have our own product which has LCD display to display certain information with different languages (Chinese, English, German, French, Italian, Spanish, Portuguese and Russian). We need to use Adobe Heiti Std fonts for the Chinese language by commercial purposes. I tried this font in Adobe? Do Folio police 11.1, but is not in this library, your partner gold in China told me this font is part of Adobe Production Premium CS5.5, which we have already purchased from Adobe, it is used freely by the user.

  It is true that we can use the fonts Adobe Heiti Std freely and even for commercial purposes in many products?

  If this font is not free, how can I buy it for commercial purposes in many products? Could be he you pls tell me the person/company contact email or phone number.

  2. we need to use Eurostile LT font for the English language by commercial purposes as well. Is it Eurostile LT available for German, French, Italian, Spanish, Portuguese and Russian as well? and I can not find do Folio 11.1 as well. But some Eurostile Std * fonts appear in the list.

  Use font Eurostile LT? freely for user

  The police in the Adobe product package, but it is not in the Adobe typotheque (Adobe? Do Folio 11.1), then it can be used freely even for commercial purposes in many products?

  Thank you in advance.

  Unfortunately, none of these fonts is available for the user interface of the product. Although Adobe has two of them, we have not the right to sell OEM licenses or the other.

• Consider purchase of Wacom Cintiq 27 HD Touch - Questions about the tactile feature in Photoshop and Lightroom

  I'm considering buying a 27 HD Touch of Wacom Cintiq monitor. I have a few questions about the two programs Adobe and their use of the 'touch' feature - Photoshop CS6 and Lightroom 5.7 running on Windows 7.

  1 problems related to touch a feature in Lightroom and Photoshop CS6 and 5 resolved that you see on the forums of Wacom a year ago?

  2. If so, is there sufficient value gained through the tactile feature in Photoshop CS6 and Lightroom 5 to justify the $500 price difference between the Cintiq 27 HD vs Touch HD? (I realize that this is a subjective question based on the abundance of its cash).

  3. I intend to stay with CS6 as long as possible to avoid a monthly subscription, BUT I wonder if buy the Touch HD can provide additional key features in future releases of these products that do not exist currently. (It is a pie in the kind of sky in question).

  Thank you!

  Kent

  Support for Photoshop Touch is added by CC 2014.2.2.  However as the Pro Intuos Wacom tablets with touch can be used with earlier versions of Photoshop and the Wacom Tablets Configurator can custom features can be used with Photoshop touch tablets.  I use LR but I don't know that the same thing would be true for her. You can configure the setting for many applications. The device driver knows which application its interfacing with and uses the parameter set for each...

  I have disable most of touch when using Photoshop.  The main reason why I have a Tablet is Photoshop Brush tools. Like Eraser, clone stamp, etc, nothing is better then a pen when it come to create the layer mask.  For most programs, I always use a mouse and I use the keyboard, the mouse and the pen with Photoshop...

  I never wanted a Cintig I do not have my hand between my eyes and the work. I'm not an artist.

• Questions about the stores in iProcurement

  All,
  
  I have a few questions about the implementation of iProcurement stores-
  
  1 oracle comes seeded with 2 stores "Backend" and "Exchange.Oracle.com. We do not have the use of these stores. I don't see an option to turn them off. Is it advisable to delete them? They occupy unnecessary space and are seen first. I read this on Metalink Note ID 429470.1 - "NOTE: while the value can be changed, it is highly recommended to not under any circumstances ever remove"Main store"page stores to manage content in iProcurement catalog administrator responsibility.» Do not know why.
  
  2. we have a Punchout for Dell U.S. catalog store and a catalog of information for Dell International. Buyers of Dell are iProcurement to each punchout to place their orders from Dell for the USA (shopping cart returns to iProcurement) - or - just use the store Dell International to go to an external URL and place their orders here (who do not return to iProcurement). What we see is - when the user clicks on the icon Dell us, it is taken directly to the URL of the PunchOut of Dell, but when he clicks on the Dell International icon, he was first taken to the list of catalogs available to the store (only 1 available catalog) and the user must then click again on the link Dell International. Is there a way to configure the Dell International icon to behave the way behaves in the Punchout icon - i.e. directly take the user to the Dell page without a need to show the list of catalogs.

  Hey,.
  To answer your Questions
  1. you can always delete those either if you want to... The reason why the link Meta Notes say not only not to delete the main store is
  i. because main store has all of the Local content in iProcurement (i.e. If you have any installation of items in the inventory you and them Module iProcurement Enabled (IE can be purchased at iProcurement) and any other article of local catalogues/categories Loaded using the BULK LOADING in iProcurement is also removed.)
  II. you can always delete the information Exchange Oracle store if you do not use.
  I would advise so do not remove the main store. Instead, you can change the sequence of the display of the stores you iProcurement Page.
  Browsing ==> Internet shopping Catalog Admin (RESP) ==> eContent crib ==> content management ==> stores ==> press the update sequence and make sure that the sequence number for main is superior to any other store so that the hand store falls last in the House of iProcurement Page

  2.i don't think that there is no option to do this. but you can always open an SR with Oracle about it and ask this question\

  hope that answers your Question.

  Thank you
  SANTU

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

• Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
  Thank you very much!

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?

   

  Yes, the registration period is between June 2, 2012 to January 31, 2013.

  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?

   

  Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.

  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.

   

  Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.

   

   

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  Then follow the instructions that will be provided on-screen to cool your PC.

  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
   
  As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
  Thank you very much!

• Question about the database to use with ESX and Labmanager

  Hello

  Finally my company is buying a permit for Labmanager and ESX server using Labmanager to our tests.

  We had a question about the database that we use for the actual installation.

  Could we use MY - SQL? Or that we have the olbigation to install a SQL or Oracle DB for the whole system to work?

  We prefer to use MY_SQL because it is open-source and will cost less to use for us.

  Thanks in advance for the answer and please excuse my bad English, I'm french spoke first.

  Lafa91

  Montreal.

  Lab Manager installs SQL Express as part of the installation and use. If you install also Virtual Center as part of your deployment of Lab Manager (do not use an existing VC server), you can use the database SQL Express is included for small installations of ESX, but MY SQL is not an option. You can search the databases supported in the installation guide for what version you deploy.

• A few Questions about the creative cloud

  I read that the Creator Cloud connection will be released in the coming weeks, which is great. I have a few questions about the download file and the creative connection program of cloud.

  I have a file which I will download. The contents of this file will be updated periodically locally. I want to do the files in this folder to stay updated between my desktop and laptop. The Creative Cloud connection program will be able to do?

  If a file is changed, which is already in the cloud program will recognize the change and stay the cloud?

  I guess just a little more information on exactly what will be the program Creative Connection cloud would be nice.

  On the topic of storage I will be able to upgrade the standard 20 GB of storage that is available when / if needed? And how much will that be?

  Another question:

  When Lightroom 4 will be available via CC and why is it not available when it was released?

  Creative Cloud connection will keep files between your desktop and the Web site synchronized. You will be able to add, edit and delete files from each end and that the changes are reflected in both.

  To see the connection creative cloud in action, you can watch this video of evangelist Paul Trani Adobe http://tv.adobe.com/watch/adobe-creative-suite-6-creative-cloud-launch-week/adobe-creative - cloud - tour-/.

  There will be a way to get more than 20 GB of storage. Adobe Creative Cloud http://www.adobe.com/products/creativecloud/faq.html FAQ has a question and an answer about it down:

  Buy extra creative Cloud storage?

  Additional storage will be available for purchase later in 2012. If you have reached your storage limit, contact Adobe Customer Service.

  Lightroom 4 will be available in a few weeks. Jeff Veen also tweeted this https://twitter.com/#! / veen/status/200810541550288896. Other Articles of Jeff on what comes to the Adobe Creative cloud here in his blog of Adobe http://blogs.adobe.com/creativecloud/coming-soon-to-creative-cloud/.

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.