Question about the replacement of router and new network location. Is this normal?

Similar Questions

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Question about the guest of dashboard and column

  My question about the dashboard and column prompt:
  
  
  (1) prompt dashboard usually work with only for columns that are in the topic area. In my report, I have created some of the columns that are based on other columns. As I have the daysNumber column that is based on two other columns, because it calculates the difference between two dates. I can't find this column invites when I create dashboard. I need to make a guest on this column.
  
  (2) to one of the column, I have only two values 1 and 0. When I create a prompt for this column, is possible that falling of drop down it displays 'Yes' of 1 0 and 'No' and always filter the request?

  Hello...

  I forgot to tell you one thing... but performance wise... If you create the column in RPD itself, it is good and easy to maintain.
  If you want this feature also... once again you choose directly the column in the area of topic... ;)

  Thank you & best regards
  Kishore Guggilla

• Questions about the replacement of a power supply for a P7-1235

  I decided to do an update on my Pavilion P7-1235. I put in a graphics card and put in power level. After doing some research on this forum and others I know well enough that I need. The only question I have is about the food. I don't know what the original power supply. There is a vent on the side where it however. So I guess that there is a fan on this side of the power supply. This eating plan I get:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139050 & TPK = % 20500% 20% 20modular %2 watt Corsair...

  I noticed that the fan is on top? Now there is no high ventilation in my P7-1235, I worry for nothing? I think that all the supplys to look the same. What is the top of the fan page for? Or can anyone suggest a replacement perfect for my exact Pavilion model?

  Sorry if the questions are stupid, but I'm still learning and want to do what I can myself!

  Hello

  Yes, you can use the power supply the same way. The image is in a vertical position for the convience of the buyer. I have the same with number of power supplies and it was fine. You can check the following links people have set up exact POWER supply in different ways.

  http://pcpartpicker.com/builds/by_part/Corsair-power-supply-cx500m

  However, please be aware of your power supply size and your case. If you have all materials/components in stock for your computer, then it is what it is;

  ATX case:

  : Height 39.4 (15.55 inches)

  Width: 17.5 cm (6.89 in)

  Depth: 40.9 cm (16,14 inches)

  PSU stock:

  (5.9 x 5.5 x 3.4 inches)

  And the power supply you want;

  Corsair size;

  "5.9"x 3.4"x 6.3"

  As you can see the length of the Corsair is considerably larger than your stock of power supply. This could hampor of air or could even make it so the holes of the PSU and the case does not match. However, this is usually not what worry. The height and width that should be worried because the length rarely causes problems, I wanted to just make sure that you knew in advance.

  Take advantage of your power supply; Corsair is a great brand.

• Questions about the synchronization between output and analog input

  Hi all

  I now have a simple task which head a signal voltage (from PXI ao0) on a circuit and then your comments a voltage at the terminals of a component, for example, that one of the resistors in the circuit, through ai0 on PXI. So in this case, the synchronization between analog input and analog output must be made to avoid error of phase shift.

  I tried to build my VI by learning this example: https://decibel.ni.com/content/docs/DOC-3882

  However I have a few questions.

  1. I noticed that there is a merged error fed the "start task" sub VI for the analog output.  What is the point of fusion to mistake?

  2. I enclose my VI (also shown below) for the output voltage. I put my writing of DAQmx Subvi in the while loop so that I can change the voltage while the VI is running.

  

  However, in the example, the author has been reading outside of the loop and before even the start task. What difference will it make?

  3. I have also attached my synchronized VI. I always put the wavegeneration and the DAQmxwrite in the loop. A bulging guard error saying about samples is not available and needs to a higher sampling rate or a longer wait time. What causes this?

  I appreciate that these problems can be solved. Thanks to you all.

  (1) first you need start the task of acquiring, he'll wait for trigger here. And then you start the build task that provides this trigger. If acquisition could trigger and never start.

  (3) you must first write something in the buffer (writing DAQmx), then only you can generate it (Daqmx Start).

  Check Cont Gen tension Wfm - Int Clk - no Regeneration.vi in the help-> examples for example.

• question about the scope of variables and memory

  I searched the Adobe documentation for an overview, but apparently, I'm not in the right place.

  Here is an example of simplified code:

  < AS >

  loadedImages:Array = new Array();

  function createImageData(imageNumber:Number):void
  {
  var imageData:BitmapData = new BitmapData (width, height);
  
  Switch (imageNumber)
  {
  case 1:
  imageData.draw (loader1.content);
  loadedImages [imageNumber] = imageData;
  break;
  
  case 2:
  imageData.draw (loader2.content);
  loadedImages [imageNumber] = imageData;
  break;
  }
  }

  < virtue >

  ImageData defined inside the function createImageData(), I know that I can not access any outside level of the function block.  But what about memory?  ImageData still exist once the code has "left" the createImageData() function?

  For example, if the function above is called twice (once with imageNumber = 1, once with imageNumber = 2), what I remember?

  -BitmapData objects stored in loadedImages [1] and loadedImages [2] and 1 BitmapData object named imageData

  -BitmapData objects stored in loadedImages [1] and loadedImages [2] and 2 BitmapData named imageData objects

  -BitmapData objects stored in loadedImages [1] and loadedImages [2] and nothing else

  Is there a way to see the 'elements' in memory, not just the quantity?

  If you call twice createImageData, for imageNumber = 1 and imageNumber = 2, there will be only 2 persistent objects to the Bitmap in memory, and they will be made by the loadedImages table. The imageData variable is just the first to receive the pointer to the allocated memory and past him on the elements of the array until it's life is over. Only when you delete the table, you will release the objects for the GC.

• A small question about the replacement of the DVD in a HP Pavilion dv6 - 2057cl

  I need to replace the DVD drive in this dv6, and I wonder if there is room for manoeuvre with regard to the replacement drive.  Can I use another drive to disc HP with a similar model # or am I limited on drive 'identical '?

  Some quick info follows:

  OS = Windows 7 home premieum (32 bit)

  The disk removed from the laptop:

  DVD Super Multi writer

  MODEL: GT20L

  FW: DC05

  HW: A2

  TYPE: AMCK702

  CT: 7AXVK012GY3NRY

  HP mPC REF: 461646-6 c 2

  S/N:
  {Removed privacy}

  MANUFACTURED: OCTOBER 2008

  I found a replacement with the same 'model' and even 'HP mPC PN' but it was made in 2009, and I don't know whether or not the implementation of the SATA connection on the rear of the car fits.

  Any help is very appreciated!

  Thank you

  DaFlash

  It seems that the reference is the same. As long as the part number is the same, it is essentially the same part and should work without any problems. The only time where this part can fail if the part number is different. If a part is different from another part (software, hardware, etc.), it will have a different reference number. Also long that 461646-6 c 2 is identical on both, there is no problem with the disk replacement.

• Question about the browser inside "sandboxie" and download to save an attachment?

  Hello

  I am very new to sandboxie. So please excuse my ignorance.

  I have the browser open inside sandboxie where I'm going to my gmail. I have an email from my son with a photo attachment. I have no trouble to consider this picture.

  However, I just found out that I couldn't save this picture on my computer HD. In sanboxie E-mail when I chose to save it in a folder in my computer HD shows like saved but when I close the browser and open my folder where I saved the photo allegedly - I can't find anything...

  So I guess that's the protection offered by sandiboxie?.  So if I need to save items of all reliable e-mails, I open my browser off sandiboxie to run my download?

  Concerning

  Snow,

  Yes, one of the goals of Sandboxie is to keep isolated... things so that, if you have accidentally downloaded a virus, he would be stuck in the sandbox [rather than infect your real system].

  Right-click on Sandboxie icon in your system tray, select Show THE WINDOW, the sandbox SAND SANBOX SETTINGS tab, DEFAULT ZONE.   On the left, click on the + sign of RECOVERY, to develop to reveal a QUICK RECOVERY.   You should see several locations of files listed there... perhaps including DOWNLOADS, DOCUMENTS, FAVORITES, or DESKTOP (even though I think some of your own peut be different).    You can add other folders of your choice.   These 'Fast food' files indicate the main areas where you want THAT Sandboxie really save files on your drive.

  It is spirit, back to your email address and see if you can direct download of your photo accessory in one of these files in particular.   When you do, you should see a popup of Sandboxie, indicating that the file is eligible for recovery, which means that it can be moved out of (side) of the sandbox.   I said in general to recover in the same folder (on my real system, as it was tyring to save in the sandbox).   And click on the RECOVER button.   If get you there, it should do the trick.

  There may be other ways to do it... but this method works for me.

  Also (now that you know where are the settings), there should be a setting to ask you to empty the sandbox when you exit the program... and it should also let you know that you have lingering there files which will be lost if saved.

  EDIT: actually, I just closed my browser sanboxed, not through QUICK-picked UP a file... and I get a screen to DELETE the CONTENTS of Sandboxie, again reminding me that I can still get the file [or well, delete the content of the Sandbox].   Certainly, it's been a while since I have set up the program, so I don't remember if it was a default option, or something I've tweaked.

  Edit2: There is a short tutorial for using Sandboxie http://www.sandboxie.com/index.php?GettingStarted , which if you have the time, elaborates on this (in parts 4 and 5 of the tutorial).

• Question about the formula of Member and BegBalance

  I have a requirement where I need to calculate the value of '' suffering '' and need to save it somewhere so that I can use it to display on the dataforms.
  
  The logic of the last value Due must be--
  
  Suffering = year previous year Total + current (Jan: Prior month)
  
  I was planning to write a formula for this member. Can I use substitution variables, as title, etc. PriorMonth in the form of Member to achieve this?
  
  In addition, since we do not use BegBalance Member for purposes like the display on the dataform etc. can I use for this requirement where I can write the formula of the BegBalance member and give it an alias name 'Suffering' I can use to show on the dataforms. Is this possible?
  
  Please let me know. All entries are appreciated.
  ~ Hervé

  Hello
  Perhaps it should look like this:
  & priorYr-> YearTotal+@sum(jan:&currMonth);
  / * No need to specify the current year as it would be fixed in pov, column or page. If necessary, replace the sum with @sumrange(&currYr,jan:&currMonth) * /.

  See you soon,.
  Alp

• Questions about the standard wireless keyboard and mouse on a h8 - 1360 t.

  Hi again,

  I have a h8 - 1360t with the standard wireless keyboard and mouse.

  1. where is information on the blue buttons 'connect' keyboard and mouse?

  2. the mouse has a power switch - do I really have to close each time, or is there a function of inactivity when the system is off?

  3 lets say that I have two exact systems within 5 feet of each other. Will the two keyboards and mouse conflict?

  Looking forward to your answers.

  Thank you

  BJ

  This document will show you how to sync mouse wireless and keyboard if they connect buttons.

  You don't need to turn off the wireless mouse. If you have problems with the batteries run out frequently, it might be useful, but I've never needed to do.

  Two different sets of wireless mice/keyboards are not usually a problem. If there is a conflict, go through the process of connection of each game.

• Question about the use of an Ad Hoc network on J4680 (wireless)

  I'm helping someone to set up it wireless printer J4680 there new HP laptop. Basically, I need to know if I created it with a 'ad hoc network' if she will be able to connect to the internet and use the printer at the same time?

  It has a network card from Sprint to connect to the internet, she's so not a modem or a router. Ive been reading about ad hoc networks which will allow him to connect to the printer wireless to your laptop without using a router... but I was also told that if it connect 2 devices to ad hoc aid which she had to disconnect from the internet, anytime she wants to print something. Can someone confirm this please?

  If this is true, and she can't use both at the same time... is there anyway that it can connect a router to his laptop computer when you are using a network adapter for the internet service?

  Sorry if this is a noob question or miss important info, im fairly new to all this. Any help would be greatly appreciated.

  Thank you.

  Imprezd02 wrote:

  It has a network card from Sprint to connect to the internet, she's so not a modem or a router. Ive been reading about ad hoc networks which will allow him to connect to the printer wireless to your laptop without using a router... but I was also told that if it connect 2 devices to ad hoc aid which she had to disconnect from the internet, anytime she wants to print something. Can someone confirm this please?

  It is correct. You cannot use the printer and internet connection at the same time. I think that there is a router where you could plug the internet card to get wireless connectivity and connect other devices to it wireless. Although I'm not sure about this. Check with the manufacturers of modern like Linksys, D-Link or Netgear router if they have such a router.

• Question about the replacement of the dilapidated old Airport Extreme

  I have an old Airport Extreme, probably about 8 years old.   There seem to be wonky on me.  I tried everything, including resetting to the factory settings.  In any case, the point is that I have to replace the unit.  However, it is mounted in a box electric wall unit, which is not deep enough to contain the new style 'vertical' Airport Extreme which is meant to sit on a desk. It is about an inch too wide.  This new design really * for my situation.

  So, I'm stuck with a choice to replace it with another employee (or I think that some are still box on Amazon) old Airport Extreme, or with another unit of the brand that does the same thing.  Of course, I prefer to stay with Apple, like all my Airport Express, my Time Capsule airport and all our devices are Apple.

  What is the best choice?

  There is a third choice: install the new unit somewhere else than in an electric box armoured, metal. This is not a good location for any wireless device.

• Satellite A200-1GH. Questions about the replacement of HARD drive

  Someone made about?
  Consider replacing _TOSHIBA MK1237GSX factory-installed ATA Device _ with HDD 320 Gb SATA - II MK3252 _Toshiba GSX_ (120±, 5400 RPM, SATA-II)

  What I'll do with the hidden partition of Windows Vista that is used for the start?
  Is it possible to ignore it?

  Any suggestions?

  > What should I do with a hidden partition in Windows Vista that is used for the start?
  The hidden partition is needed for the repair of the system!
  If something goes wrong with the system, Vista would be able to repair the system using the files from the hidden partition.
  The Vista operating system creates this partition automatically during the installation of the OS!

  After you change the HARD drive, just start using the Toshiba and Vista recovery disk should create the partitions and must run the installer automatically

• Questions about the discs of recovery and partitioning Satellite A200-QH0

  I bought a model of Satellite A200-QH0 in Australia and due to the lack of forums in our country, I would like to ask a few questions here if that's ok.

  The book contains 3 partitions - partition "EISA Configuration" of 1.6 GB, the great partition of the BONE and the recovery partition. So I did the recovery DVD? s using the Recovery Disc Creator tool, as we are not provided with a real disk. But I would like to know what will make these records? My questions:

  1. they really will return that disc hard back to the _exactly_ how he was including the partition layout and software pre-installed?
  2 will be the recovery DVD works even if the disk has been repartioned? I would like to divide the system partition to give space for the files of data etc. But this extra partition will stop the recovery procedure works correctly?

  Please understand that I'm not interested in reformatting the entire disk. I want to just split the partition from the OS. But in case I need to replace the disk in the future or something, I would like to know how to close to 'original', these disks will make me, no matter what I do on the disc?

  Thank you
  Dave

  Hello

  I m not 100% sure how recovery works on the Australian laptops computers Toshiba, but I presume that the restore CD contains the image of Toshiba with the operating system Windows, drivers, tools and utilities.
  I think that if you want to use the recovery CD then the whole HARD drive will be formatted and all partitions will be erased.

  I think that the recovery partition is not created using the recovery CD because the CD of restoration has already been created for the recovery partition is no longer necessary

  Concerning

• A few questions about the p6674y of hp and how best to update its graphics capabilities

  Hello

  I'm interested in upgrading my HP p6674y with a nicer graphics card. I've had this computer for about 2 years now. If I have to, I'm ready to upgrade the power to do this (even if I have no idea how to do this). I just want to be able to play YOUR v: Skyrim on my computer.

  If there is a way to upgrade just the graphics card, I want to do. The truth is that I am inexperienced with these sorts of things, then I want to be making sure not to break my beautiful machine, try to add or update!

  Do you have suggestions for what models graphics card or power supply purchase that will work with my computer?

  Thanks for any help you can give me.

  The recommended map is circa 2011 GTX550Ti (400W). See here

  Would require a new power supply, because your system has a skinny 250W. Ideally, you should select a 500W-630W PSU, as the power curve is best. The key is to find the mentioned card. Latest maps could support UEFI BIOS, and that would not work for you.