Question about the text from the image

Similar Questions

• Questions about the images shared in Photos

  My wife and I have a shared photo album, and I copied a picture inside. So I decided to crop the image, I did on the version in my own library. I was surprised that the changes appear in the shared image. Issues related to the:

  • Are changes as it's supposed to appear on the shared item?
  • When the images are 'shared' in this way, they only live in the cloud?
  • If I delete the original in my library, the "shared" version still there?

  Thank you!

  • Are changes as it's supposed to appear on the shared item?

  No, after the shared photo editing, share the again edited version.

  • When the images are 'shared' in this way, they only live in the cloud?

  They are stored on iCloud and downloads local shadow copies, which are visible in your library of Photos from your Mac.  But shared photos are not added to your photo library, unless you are importing.

  • If I delete the original in my library, the "shared" version still there?

  Yes, the shared version will remain in iCloud, until you remove the photo of your stream shared.

• Questions about the Image matte key

  I'm quite confused on Overlay of Imageand would like to comment on these observations:

  1. When I apply a picture as a cache, it does not seem possible at first to determine what image I used as the matte. After that I applied a mast, can I know what image is used as the mast?
  2. I have a 1920 x 1080 in grayscale, image PSD which is used as cache. The central part of the matte is black, the rest is white. I checked the RGB values in the matte and they 0,0,0 or 255, 255, 255. In the effect of overlay of Image inside the first I composite using Luma Matteand marked to reverse. If I reverse the image in Photoshop so that the Blacks are going to white and vice versa, it makes no difference in the creation. The effect of the matte is the same. Why is this?
  3. If I apply the matte from 1920 x 1080 to an image inside the first superior at 1920 x 1080, the cache does not work. Is this normal? I can get the matte works with the larger image in a new sequence and then this sequence inside the original sequence of nesting, but I do not understand why it is necessary.

  Any feedback is most appreciated. I use CS6.

  Guy,

  Then, you should migrate to the masking effect Track Matte.  Formally, you import the matte in the project (traceable through the reveal in Finder/Explorer) and place on a track above the video in need of carpet.   The effect is placed on the clip (V1) and configured to play the matte on V2 etc.

  

• Questions about the Image of the space, toolbar buttons, resize, arrows

  Here are a few beginner questions more.

  1. is it possible to get rid of the task bars that I have drawn autour ellipses? I rarely use them and would rather have the space.

  

  2. in the reference doc, there are more icons in the space indicated by the arrow. How can I customize this space?

  3. in the resizing of an image, 98% of the time I want to do in percent. Is it possible to do that by default? I could handle this with a keyboard macro, but the pixels to percent drop is not accessible via the keyboard. Solution?

  4. How can I tell PSE 14 make me draw an arrow (i.e., a straight line with a tip of arrow at one end)?

  Thank you very much

  Al

  1. is it possible to get rid of the task bars that I have drawn autour ellipses? I rarely use them and would rather have the space.

  Unfortunately, no. Many users would like.

  2. in the reference doc, there are more icons in the space indicated by the arrow. How can I customize this space?

  For me, I always have these icons on the right... Have no idea at the moment.

  3. in the resizing of an image, 98% of the time I want to do in percent. Is it possible to do that by default? I could handle this with a keyboard macro, but the pixels to percent drop is not accessible via the keyboard. Solution?

  These settings are not 'sticky', unfortunately.

  4. How can I tell PSE 14 make me draw an arrow (i.e., a straight line with a tip of arrow at one end)?

  Two ways: either as a tool option online, or by choosing a type of arrow in the menu (hotkey U) forms.

  Edit:

  The #1 question, my choice is to use the Preferences menu and select 'allow documents floating in expert mode. Allows you to use the screen for editing, which is recommended when you master the main shortcuts. Another tip: the 'tab' key hides the side panels.

• A question about the image quality?

  I create my menus by using an image that is offered by selected relative when positioning.

  That's by the by... However my menu option is set on the screen as 30 pixels wide.

  If I create the actual image as 30 pixels wide so that the text is very unbalanced and is horrible.

  So if my menu shows 400px by 30px w h and image real must be 800px w h how do I create a good quality image without having such quality terrible 30px?

  I create higher resolution and then somehow reduce the width of the bottom?

  Thank you

  Terry

  Do you use a high-resolution Retina Display?

  Image quality is determined by the total number of pixels in your image - h X w, 325 x 200 500 x 400 vs and the 72 vs 96 ppi vs 300.  So if your screen has a pixel density of high, normal web images may appear grainy on your device but is generally not a problem for the screens with a normal pixel density.

  Consider using the Bootstrap Glyphicons or Fonts-Awesome icons and SVG.

  Open your PSD into illustrator and SaveAs SVG (scalable vector) that is much sharper than bitmaps.

  See the following article:

  A guide to creating a better web of retina - Ivo Mynttinen / User Interface DDesigner

  Nancy O.

• Question about the image of the user interface of the Script

  Hello world

  We can insert a picture into script

  Like this:

  var l is new window ('dialog', 'Testing');.

  var pictures = w.add ('image', undefined, the record ("" ~ / Desktop/mingxing2.jpg ""));

  w.Show ();

  But is it possible to say the script if you do not find the photo, we have the second choice

  Like this:

  var l is new window ('dialog', 'Testing');.

  var pictures = w.add ('image', undefined, of the file ("~ / Desktop/mingxing2.jpg" |)) (("" ~/Desktop/mingxing3.jpg "));

  w.Show ();

  or third choice...

  Thank you

  Respect of

  Teetan

  Hi Teetan,

  Why not call a function that returns the file you need?

  var getImageFile = function () {}

  var f = file (Folder.desktop+"/monImage.jpg');

  ! f.exists & f = file (Folder.desktop+"/image.jpg');

  ! f.exists & f = not defined;

  return f;

  }

  var l is new window ('dialog', 'Missing Image?');.

  flowers of the var = w.add ('image', the undefined, getImageFile());

  w.Show ();

  HTH,

  Loïc

• Very basic question about the images in tables

  So I made 4 buttons, 90 pixels wide by 20 pixels high each in photoshop. Then, I made a table 360 pixels wide by 20 pixels high in DW to make a small nav bar. Then I placed the 4 buttons in the table. Why is - it is showing only 366 pixels wide and when I saw the navigation bar on a browser that the 4th button down to the second line. There is no padding or margin adjustment so I wonder why it isn't an exact?
  

  27/09/06 20:47, "614mike" wrote:

  > So I made 4 buttons, 90 pixels wide by 20 pixels high each in photoshop. Then
  > I
  > done a width of 20 pixels high in DW to make a small nav bar table 360 pixels.
  > Then I placed the 4 buttons in the table. Why is this it is showing only 366 pixels wide
  > and when I saw the 4th button browser navigation bar falls down to the
  > second line. There is no padding or margin so I wonder why it is not a
  > exact fit?
  >
  >
  In fact said 0 padding and margin 0, or are you assuming that
  There is no padding or margin because you do not specify any?

  Most browsers use a padding by default and margin applied when you
  don't specify anything whatsoever, and it varies from a browser. Try
  specifying 0 padding and margin 0, if you do not already have.

  --
  Ghizlaine

• The specific question about the placement of an image into text.

  Hello, I had a question about the placement of an image into text.

  I did the contours to create text to place the image inside. My text is 5 words and two lines inside the box.

  When I do create contours he gives me 2 transparent route separate layers for the top and the bottom line.

  How will I be able to do that in a single layer of compound to place image that expands to the two lines?

  First of all, there are two ways of describing the type. The default value creates anchored objects. You want a separate object, so hold down the Option/Alt key when you create outlines. Drag the new contours to separate the text block.

  It is useful to open the layers panel and view the contents of the layer. You have created a group which consists of two transparent traces. In the layers panel, expand the layer so you can see the structure. Shift-select the two transparent traces. (Make sure that the group is not selected.)

  

  Then choose object > tracks > make a compound path. This makes the two transparent tracks into one. Then, you can place or paste into the single compound path.

• Got a legal question about the installation of Adobe Photoshop Elements.  How to get help from Adobe using a chat session?

  Got a legal question about the installation of Adobe Photoshop Elements.  How to get help from Adobe using a chat session?

  AdobeTomFaith

  If your program is Photoshop Elements, then you have posted in the wrong forum. Some how your son got posted in the Forum Adobe Premiere elements (video editing). Please re-post your thread in the Adobe Photoshop elements Forum.

  Photoshop Elements

  Wherever your son is, please include Adobe Photoshop Elements version and operating system and the description of the installation problem (error messages, stage of failure, etc.)

  Support Adobe seems to be limited to Adobe cat and is classically limited to the current version which is 13. Then, you the best avenue to success is likely to be through the Adobe Photoshop elements Forum. But that shouldn't stop you trying to determine what kind of support you can get from Adobe cat on your question.

  I would offer this link that is specific for Adobe Chat download and installation

  Contact the customer service (this is not the same destination as shown in a previous post in your thread)

  This link is specifically designed for

  Photoshop Elements

  Download, installation, setting up

  Download and installation

  Panel discussion

  (18:00 - Friday 7 pm Sunday)

  Thank you.

  RTA

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I go back in just the Quicken file and restore it until I downloaded the update do I have to restore the entire

  I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?

  Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support

• Questions about the Windows Feedback program Fullfillment

  When will I know if my fullfillment of windows feedback program is over, that I have installed on my PC?

  Hello mpic16,

  If you have questions about the Windows feedback program, you will need to respond here.
  https://WFP.Microsoft.com/welcome.aspx

  You can send an email to: * e-mail address is removed from the privacy *.

  They would be better able to answer your questions and concerns.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Question about the differences in commands

  Hey guys -.

  I just had a few questions about the differences between orders that seem to perform the same function.  Can you let me know if an order is more preferable to the other and what the difference is.  I would really appreciate it as it I currently practice some INE laboratories and I see that orders change from lab to lab.  Thanks advance!

  1. When you write a static NAT for specific host 1 - is - this important if I understand the 32 subnet?

  EX: static (inside, outside) 1.1.1.1, 2.2.2.2 VS static (inside, outside) 1.1.1.1 2.2.2.2 netmask 255.255.255.255

  2. when I'm setting up a router as a CA server and it is necessary to "export" the key, whatever my method of exporting the key?  If so, in which method call for which solution?

  EX: key export cryptographic rsa ciscox pem URL nvram: cisco VS. exporting key 3des cryptographic ciscox pem 3des rsa terminal cisco

  3. If I have to mark a packet with a DSCP of X value, matter if I use the 'set dscp' VS 'set ip dscp?  If so, what is the difference?

  FXY

  Policy-map X

  class X

  the dscp X value

  VS

  Policy-map X

  class X

  X ip dscp value

  I guess pertaining to 2, if i was speaking in terms of from a cisco router to another cisco router - would terminal be acceptable?
  
  

  Yes, the "Import cryptographic key" command can take a url and also from the terminal entrance. In this terminal case wil is much easier.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni