Question automate several tenants in vRO

Similar Questions

• Several problems with VRO 7

  Just a little survey here if someone else saw the same problems I know with VRO 7, or is my installation just watered somehow

  -Copy and paste items from workflow no longer works in the workflow designer, it worked very well on VCO 5.x and I think than 6.x also

  - VRO 7 won't save in vSphere Web Client 6.0 u1, at least when using vSphere authentication mechanism next VRO. User error, see answer below.

  -Workflow Designer seems terribly talkative on network, much larger than in previous versions. I'm having serious slow and even complete hangs Workflow Designer when I access remote server VRO. Remote connection is IPsec VPN internet connection over 10/100 Mbps, with 4ms latency between client and server.

  At least these questions were annoying me on VRO 7, anyone else have similar experiences?

  vRO 7 is no more based on the mechanism of the vCenter extensions and for this reason extension is not created by default when you configure a host to vCenter. You still have the workflow you need to manage the extensions in the configuration for the vCenter plugin folder. vSphere WebClient can find vRO server by looking at the extensions on vCenter.

• Number of antennas router question?  (Several gadgets WiFi using 1 router)

  -My House is a 3 storey 5 bedrooms single family home.  There are 4 people living under his roof and each person has at least 3-4 items wireless who rely on our network domestic wi - fi.  Include wireless iPhone 2 of 6, 3 iPhone 5, 2 iMac (an older and a new one), 1 airbook, 1 MS Surface, 2 older laptops Apple (the old 1 "thick white), 2 iPads, Kindle 1-2, frame 1 photo wireless, 3 printers, wifi, 1 Sony PlayStation4 (via wifi) and much more.

  Our current router is a double (2.5 and 5) and we use them both, and we had recently a technician change the channels, so we are not in competition with the neighbors.  The router signal strength is strong in the home to most of the places.

  My question: with so many features, would be useful to have several routers with multiple antennas to accommodate this request, or made this same question?

  My current router has 3 visible external antennas.  I read that the Airport Extreme has 6 internal antennas.  I'm ready to go buy Airport Extreme, if 3 additional antennas can help, or if I can use two routers for a total of 9 antennas (if this is important).

  Our services to wide band is xfinity and we have one of their fastest options.  Not quite the 105, but about 80.

  Any suggestions?

  Several wireless routers will tend to work better than the Gothic pulpit super multi-antenna a monster looking for router.

  But they all need to be connected with the ethernet.

  Read how to get excellent wireless in your House.

  http://www.SmallNetBuilder.com/basics/wireless-basics/31576-the-best-way-to-get-ensemble-Maison-sans wire-coverage

  External antennas tend to be more effective than internal, but the actual number of antennas is easily overrated.

  Most of the antennas used on routers now are dual band... which means inside the plastic, they have sections for the two bands... If an antenna is really two.

  Our current router is a double (2.5 and 5) and we use both

  Is what model exactly? Of basic etiquette please.

  We had recently a technician change the channels, so we are not in competition with the neighbors.  The router signal strength is strong in the home to most of the places.

  It would have been correct for the first 5 minutes after the technician left the House and then totally out of place. Channel of all the equipment that surrounds you change every day, every hour... maybe every 5 min. While I don't disagree with fixing channel... others would say that it should be left on auto. You gain nothing much at all.

  If the signal strength is good over a 3-storey house, you are incredibly lucky.

  You can't effectively add routers more unless you install ethernet to provide an infrastructure for data streams.

• Several tenants on the configuration of the disks Exadata

  Hello

  Exadata pre-built 2 bow TIE, ASM 3 configured disk group.

  Please may I know what is the configuration of Group of disc for the consolidation of Multi tenant on exadata.

  Thank you

  Since the DSO balances actually all batteries on all counts on all the disks on all storage servers, it is actually irrelevant whether you have one or several starts as long as your start is spread across all disks. This is one reason why having less starts can be beneficial, because they are guaranteed to be spread across all disks in the exadata rack. If people try to change the standard configuration after installation there are chances of them being wrong, dropping disks off starts and slice not uniformly leading to loss of performance, availability and recovereability.

• VRA unable to create groups of companies with the same name in different tenants with vRO

  vRA 6.2.2 Build - 2754020

  vRO 6.0.1

  Through the vRA GUI I can create groups of companies with the same names in different tenants as follows:

  Tenant1: BusGroup1, BusGroup2, BusGroup3

  Tenant2: BusGroup1, BusGroup2, BusGroup3

  
  

  However, to create business groups with the same names in different tenants via the vRO, specifically the workflow plugin Library / vCloud Automation Center / Administration / Business groups / create a group of companies, fails in the second tenant with the below error:
  

  
  

  [42106] the specified condition is not respected for 'name '. (Name of the dynamic Script Module: createBusinessGroup #12)

  If I change the naming convention to be different by tenant, then I have no problem. I thought it might be a restriction in the product, but as said I was able to create with the names of same origin through the user interface.

  Anyone experience the same thing?

  This is a known problem within IaaS API the plugin vRO uses to manage groups of companies through business groups workflows. You don't have the same problem of the vRA UI because the user interface (according to the 6.x) does not use the same API IaaS to manage groups of companies.

  The only alternative to 6.x for now is to directly use the helper generic entity Manager plug-in itself. You can take a look at the first example in example CRUD Infrastructure tasks management Scripts.

  I hope it helps.

  Sergio

• Como resetear automatically several vm

  Hola todos,

  Tengo varios Betclic en mi plataforma vmware ocupo what are las some pools computers to automatically cada cierto tiempo, users of esto para reinicien las vm los hay alguna forma hacerlo desde vmware?  is that you can hacer pero para una Máquina, pero no is como hacerlo para as a group of maquinas is reinicien automatically cada cierto tiempo

  Gracias

  Saludos,

  Buenas,

  If no of VMWare PowerCLI conoces aun you recommend primero as do some the tests primero, no antes start the creation of a script that reset VMs, is that you can reiniciarlas all sin querer y eso can disgustar a alguien. Te Le:

  PowerCLI are a set of functions Advanced PowerShell that allows desde linea of commandos, administrar una infrastructura virtual, desde you propio equipo.

  (1) antes of nada, debes tener wont microsoft PowerShell: http://support.microsoft.com/kb/968929

  (2) Instala PowerCLI from VMWare: http://communities.vmware.com/community/vmtn/vsphere/automationtools/powercli

  (3) Haz una pequeña dinna prueba: Crea el fichero C:\PRUEBA. PS1

  (4) introduce el siguiente Código en el fichero PRUEBA. PS1:

  Add-PSSnapin VMware.VimAutomation.Core

  SE connect-VIServer-Server SERVIDOR_VIRTUAL_CENTER - user "USER" - password "CONTRASENA".

  Get - VM

  Note: Cambia los conexion segunda linea por los datos of you Virtual Center.

  (5) Desde a CMD, desde you equipo, runs: powershell-command '& C:\PRUEBA. PS1.

  Observaras you devuelve UN meeting of tus VMs

  If quieres ver mas comandos, clica sober el icono PowerCLI tendras you en ecritorio y conectate con igualmanera:

  SE connect-VIServer-Server SERVIDOR_VIRTUAL_CENTER - user "USER" - password "CONTRASENA".

  Posteriormente con el cmd - let get-help you can spend what you can run comandos ir contra you Virtual Center enters ellos el cmd - let you waiting para reiniciar VMs.

  Are going to say.

  PD. -Add tus favoritos esta tambien web: http://technet.microsoft.com/es-es/scriptcenter/dd742419(en-us).aspx

  Saludos.

  Xavier

  VCP4 and professional VCP3 certified VMware.

  -

• Transition from one question to several questions in DPS

  Trying to produce our first Apple kiosk application. When we started to deal with through DPS App Builder, we initially chose one question (the $49.95 / month). Then we went to DPS Pro and it will not change this field. (Screenshot see attached). This field is grayed out and won't allow it to be changed.

  

  Can someone tell us how to get it opted for several questions so that we can this kiosk to Apple instead of the iTunes App Store?

  Heidi

  When you change the type of application, you must create a new instance of the Viewer from scratch in DPS App Builder. To get the app in kiosk, you will need to create a subscription with push notifications enabled application. See the Companion Guide for more details.

• I need my iPhone 5 to numbers automatically several times a month to keep my number as I am out of the country

  IPhone 5

  I want the phone to make a call by month automatically while I'm out of the country to keep my phone number.

  This seems unusual to me. Why and who do you call to keep your phone number? Do you take your phone with you when you travel? Just set up a reminder that you make the call. I'm not aware of any way to have the phone to make the call. Should what type of response you do when you get that call? I don't see how having the phone automatically call a number no response after that the call would end would solve anything.

• before buying question: automatically print all of my emails, possible?

  Hello, I need a printer that automatically prints all of my emails, without a pc.

  Can I use the eprint for this function?

  the goal is that every visitor to my website can send a mail contact, and I need an automatic of all that of the mails print.

  If consumers have NOT installed application eprint.

  is this possible?

  Thanks in advance

  The vast majority of cases once the printer has its own connection to the Internet must be a required additional configuration. Sometimes some network printer settings may need to be changed if the printer does not seem to be able to establish a connection to the Internet, but ago accepted solutions for this problem on the forum here.

  Best.

• Question about several berries in a single storage pool

  A couple of years ago, we bought a PS4100x and that it has set RAID6. We were happy with our performance, but we are running out of storage space. We have recently acquired a PS6000e and PS4000xv that we seek to add to the default storage pool and to give us more storage capacity. I was able to successfully join the PS4000xv swimming like a RAID10 (performance gain) and want to join the PS6000e swimming like a RAID6 (provision of capacity).

  I've read several different positions on the problems of mixture of RAID levels and types of disk (SATA/SAS) and negatively impact SAN performance or downright causing failure of SAN. Furthermore, I continue to find mention of problems with the previous firmware. Unfortunately, I can't find anything current that will help me through this issue.

  My goal is to have the following 3 tables of EqualLogic in the default storage pool:

  • PS4100x (10 k SAS) RAID6 (approx. 15 to)
  • (15 k SAS) PS4000xv RAID10 (approx. 3 to)
  • PS6000e (7.2 k SATA) RAID6 (approx. 11 TB)

  Any help or advice would be much appreciated. Thank you!

  Reference Dell Dustin,

  You can mix both RAID and the types of players in the same pool.  That is supported.  Especially on current FW 7.1.5 and 8.0.2 just came out today in fact.

  When there are several members in the same pool, the data is distributed across members, in proportion to their relative sizes.  If the 15K Member will have only a small amount of data compared to the others.

  Often, when you buy a 15K member is for a specific purpose in mind.  Some of the benefits of faster spindle will be lost for more data on the volume will be on more/more members.

  You can set preferences for volume to R10 to ask more than the volume go.  You can start with the 15K in its own pool.  Later, you can merge the pools.

  If you are satisfied with your performance now and are not the intention of that greatly increases the load of I/O then you can keep them in the same pool and it will be much better overall performance.  Given that the members of the group are working together.

  In addition, during a sustained peak load, the advanced performance load balancer will exchange blocks of one very busy at a less crowded.  This helps out even the load.

  Kind regards

  Don

• FrameMaker 11 - question automatically fill leader Info

  Hi all

  We have a problem with the file Info... fields in FrameMaker 11 being automatically filled by the unwanted text, even after we removed it.

  Subject fields and key words contain the text we want to remove all the files in a book.  We open each file and delete the text, save the files, and then close the book.  When we reopen the book, all the files have the unwanted text of back once again in the subject and keywords fields.

  Ideally, we would like to completely remove the text unwanted from the files (a reference to the number of the piece of a piece of equipment).  However, we cannot find where text is stored.  It does not appear in the list of Variables, but must have been manually added by a previous writer because it is a specific company reference number.

  Anyone know where the text is stored?  How to remove the text from the File Info fields without it returning?

  Thanks for the help!

  Emma

  It is a bug.

  The information is stored in two locations in the MIF:

  • End # PDFDocInfo
  • at the end # of DocFileInfo.

  To remove a value, you must remove it from these two places to the MIFID. I suggest that you remove the entire DocFileInfo. Then change the PDFDocInfo so that it contains only the values that you want to keep.

  Please also report this as a bug to https://bugbase.adobe.com/index.cfm .

  FYI, the DocFileInfo is XML encoded in hexadecimal. After decoding, it looks like this:

  http://www.w3.org/1999/02/22-rdf-syntax-ns#">

  "xmlns ="http://purl.org/dc/elements/1.1/"

  "xmlns:XMP ="http://ns.adobe.com/xap/1.0/"

  xmlns:PDF ="http://ns.adobe.com/pdf/1.3/" >. "

  application/framemaker

  DELETE THIS

  FrameMaker 10.0

  0116 03-12 T 10: 24:38 + 01:00

  0116 03-12 T 10: 26:01 + 01:00

  0116 03-12 T 10: 26:01 + 01:00

  FrameMaker 10.0

  DELETE THIS

  I think that while you're editing the document, FrameMaker using only one of these structures (PDFDocInfo/DocFileInfo). But when you save the document, it is then their merger, copies data from the unused structure if the other structure is empty.

• Short and simple question - automatic update for the most part

  Hello

  I just inherited three installations of Essentials. Is anyway to get ESXi hosts updated automatically as if it was possible with the Update Manager and the other versions of vSphere?

  See you soon

  AWo

  Because of the limited edition of Essentials functions, I'm afraid you'll have to patch update / hosts interactively. Same Update Manager is perhaps not very useful, because Essentials does not support the vMotion/DRS, and should not be any power on VM on the host to remedy. You will also need to find a workaround for the ESXi host on which vCenter Server runs, except the server instances vCenter for each Kit are run on hosts of the other Kit.

  André

• Question about several popular vm with the same kernel version

  So, I have been informed that ESX is smart enough for to run several virtual machines with the exact same kernel that it loads only one instance of the kernel in memory for all of them so that it saves space in RAM. This seems quite remarkable to me, and I'd like to see if VMWare has any white papers or other documents on this. I'd like to believe it's true, but it seems incredible to believe.

  Is this really how ESX functions? If I have 10 XP SP3 machines with the same level and exact same version of the kernel patch, VMWware won't really load only one instance of the core XP in RAM to separate the 10 machines? If he does that, how handles when 10 machines all want access to the same statement in kernel mode at the same time separate?

  Welcoem to the Forums - ESX will actually 10 instances of the core of the customer even if they are the same OS - but once loaded using Transparent Page Sharing the vmkernel (the o/s of the ESX Server) can recognize identical pages and store them a time-read only memory - if the virtual machine tries to write to that page a copy and writing is done - if this new page is another page in memory that one instance is maintained. This saves a TON of memory-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• additional question from several slashes

  I use the ncurse to select my links. However, Dreamweaver generates him... /... / (folder back told me) and I can change the dreamweaversettings so that it doesn't?
  
  Love & peace to Mark Cedermark.

  mace1975 wrote:
  > I use the ncurse to select my links. However, Dreamweaver generates the
  > .../.. / (folder back told me) and I can change the dreamweaversettings so
  > they don't have?
  >
  > Love & peace Mark Cedermark.

  Hi Mark, it is actually 2 records back. To stop this, when you select the
  Link, change the links of links of the site document. That
  will change the links to /.

  You can also set this default value in your site manager.

  Dooza

  --
  Display guidelines
  http://www.Adobe.com/support/forums/guidelines.html
  How to ask Smart Questions
  http://www.CatB.org/ESR/FAQs/smart-questions.html

• Satellite A210: Random Questions after several blue screens

  This morning at the College, I started my laptop (satellite A210)
  After entering the password started... after 5 seconds, I got a blue screen SHORT (3 seconds)... This can happen 5 times...
  then I was really p * ssed - I booted in safe mode... do you have a system recovery (in German "systemwiederherstellung")
  After doing that my laptop has begun... but now begins the horor

  1 Explorer.exe crash so that start up - so I have to start explorer.exe mauel with the Task Manager
  2. with this also sidebar, bar SCROLLING-option AND the menu upwards on the screen... you know... the one you get with the pointer on... then it appears and you can select things like brightness, volume or energysafeoptions...
  3. opening a folder takes almost 1 minute to show its files... (totally slow!)

  I ran TuneUp2008, O & O Defrag 10-Prof. and also ESET NOD32 Antivirus with the new definition (found nothing).

  ... Yes... what to do now? ... I don't know how to start programs from the point 2. and 3. ! Please tell me how!

  Yours sincerely Nico

  What should do?
  Take the recovery CD in the CD/DVD drive and try to restore the operating system from the Toshiba Recovery CD.
  After reinstalling the laptop should run correctly if it is not a hardware problem is possible.