Question from numbers in the stored procedure

Similar Questions

• How can I transfer content from an XML file in a MS SQL database of the stored procedure using LabWindows/CVI SQL Toolkit?

  Hello

  I have a problem to transfer content to an XML file in a MS SQL database through a stored procedure data/fixed. I am able to transfer the content of the file using method...

  HSTMT = DBPrepareSQL (hdbc, EXEC usp_InsertReport " ... ");

  resCode = DBExecutePreparedSQL (hstmt);

  resCode = DBClosePreparedSQL (hstmt);

  ... but in this case, I am not able to read the return value of the stored procedure.

  I tried to follow the example of the stored procedure in the help documentation (DBPrepareSQL), but I miss a xml data type?

  No idea how to solve my problem?

  Cake of KR

  DianaS salvation,

  Thanks for your comments. During this time I found another way which fullfill my needs:

  resCode = DBSetAttributeDefault (hdbc, ATTR_DB_COMMAND_TYPE, DB_COMMAND_TEXT);

  sprintf (sz_SqlStatement, "DECLARE @TESTID INT EXEC @TESTID = usp_InsertReport ' SELECT 'RetVal' %s = @TESTID", sz_Buffer ");
  HSTMT = DBActivateSQL (hdbc, sz_SqlStatement);

  While ((resCode = DBFetchNext (hstmt)) == DB_SUCCESS)

  {

  / * Enter values in the record. */

  resCode = DBGetColInt (hstmt, 1, & s32_TestId);
  }

  resCode = DBDeactivateSQL (hstmt);

  sz_Buffer is the content of the XML file.

  Cake of KR

• How to call the stored procedure from javascript? (Google suggest, AJAX)

  Hi I want to set up a text field so that it behaves like [Google Suggest | http://www.google.com/webhp?complete=1 & hl = en].
  
  I read this post .
  
  Now, I installed everything according to this document. But it simply doesn't. And I don't know why.
  
  I think that problems can fall into the following three categories:
  1. the text field and the page invoking the appropriate javascript?
  2 - is the JavaScript call the stored procedure?
  3. the stored procedure correctly returns the result formatted?
  
  I'm assertive for 1 and 3, but I'm not sure 2. Because I don't know how if a stored procedure has been called? Is there a PL/SQL statement that I can query in SQL * more?
  
  Also, I would like to know how to debug AJAX in the APEX. It involves a lot of things.
  
  Finally, I used APEX 3.2 and Oracle XE. I can't find file dads.conf or marvel.conf. Is ' / apex / "the virtual directory for APEX?
  
  Thank you very much!

  Buffalo,

  I managed to make it work on XE with APEX 3.2!
  It took more time than expected because my XE installation was still on an earlier version of the Apex and I had put it first...

  But that's what I did:
  -in the ac.js file, I changed the path ' / apex / "and I added the ac.js file to my candidacy as a static file. So as you did.
  -J' copied my request to the XE and copied my procedure on the schema that is related to my request
  -J' gave to run anonymous rights my procedure

  Now at first, it did not work...
  Then I suddenly remembered something: If you want to run a procedure through the pl/sql gateway in the XE, XE please how it is.
  Do you this by changing the APEX_030200.wwv_flow_epg_include_mod_local function!

  This is the code for the function changed for my example:

  CREATE OR REPLACE function APEX_030200.wwv_flow_epg_include_mod_local(
      procedure_name in varchar2)
  return boolean
  is
  begin
      --return false; -- remove this statement when you modify this function
      --
      -- Administrator note: the procedure_name input parameter may be in the format:
      --
      --    procedure
      --    schema.procedure
      --    package.procedure
      --    schema.package.procedure
      --
      -- If the expected input parameter is a procedure name only, the IN list code shown below
      -- can be modified to itemize the expected procedure names. Otherwise you must parse the
      -- procedure_name parameter and replace the simple code below with code that will evaluate
      -- all of the cases listed above.
      --
      if upper(procedure_name) in (
            'MATTHIASH.INCSEARCH') then
          return TRUE;
      else
          return FALSE;
      end if;
  end wwv_flow_epg_include_mod_local;
  /
  

  After that, the AJAX function worked as expected...

  HTH
  Matthias Hoys

  Published by: mhoys on August 13, 2009 15:24

• Materialized view, based on the stored procedure

  Hi all

  is it possible to create a materialized view on the results returned by a stored procedure?

  If this is not the case, do you think that any other way except for filling a table with data from the stored procedure and then founded the MV on it?

  Thanks in advance.

  MichaelTsilikidis wrote:

  Sorry I don't speak properly. In fact the procedure does not return a value, it fills one of its parameters (of the ref cursor type) of data. That's what I wanted.

  No it's not.

  REF CURSOR don't store data, so it's not possible.

  A Ref cursor is just a pointer to a query... and you can't "select from" a ref cursor, you can retrieve only one open.

  PL/SQL 101: Understand the Ref Cursor

  As correctly stated above, you can't question from a procedure to a function, and a materialized view is based on a query, you cannot use a procedure in a materialized view.

  You could use a function pipeline instead of a procedure, or have the pipeline function obtain the results of the procedure and pipelines, and then the materialized view could be based on the results of this function in the pipeline.

  example of function pipeline:

  SQL > CREATE or REPLACE TYPE AS OBJECT num_descript (num number, descript varchar2 (30))
  2.

  Type of creation.

  SQL >
  SQL > CREATE or REPLACE TYPE tbl_num_descript AS TABLE OF THE num_descript
  2.

  Type of creation.

  SQL >
  SQL >
  SQL > CREATE or REPLACE PACKAGE AS-reftest
  2 FUNCTION pipedata (number p_choice) tbl_num_descript RETURN PIPELINED;
  3 END;
  4.

  Package created.

  SQL >
  SQL > CREATE or REPLACE PACKAGE BODY AS-reftest
  2 FUNCTION pipedata (number p_choice) tbl_num_descript RETURN PIPELINED IS
  3 v_obj num_descript: = num_descript (NULL, NULL);
  4 v_rc sys_refcursor;
  5 BEGIN
  6. IF p_choice = 1 THEN
  7 v_rc OPEN to SELECT empno as num, ename like descript FROM emp;
  8 ELSIF p_choice = 2 THEN
  9 OPEN v_rc to SELECT deptno as num, dname as descript OF THE Department;
  10 END IF;
  11 LOOP
  12 FETCH v_rc INTO v_obj.num, v_obj.descript;
  EXIT 13 WHEN v_rc % NOTFOUND;
  14 PIPE ROW (v_obj);
  15 END LOOP;
  16 v_rc NARROW;
  RETURN 17;
  18 END;
  END 19;
  20.

  Package body created.

  SQL > select * from table (reftest.pipedata (1));

  DESCRIPT NUM
  ---------- ------------------------------
  7369 SMITH
  7499 ALLEN
  7521 WARD
  7566 JONES
  7654 MARTIN
  7698 BLAKE
  7782 CLARK
  7788 SCOTT
  KING 7839
  7844 TURNER
  7876 ADAMS
  JAMES 7900
  7902 FORD
  7934 MILLER

  14 selected lines.

  SQL > select * from table (reftest.pipedata (2));

  DESCRIPT NUM
  ---------- ------------------------------
  10 ACCOUNTING
  SEARCH 20
  30 SALES
  40 OPERATIONS

• Key of the stored procedure

  Hello
  
  I have a function in the db that returns a numeric value after passing an Id (digital). How do I create a join in physical layer as funtion will return a digital and given that it is a function, it can return only a single column.
  
  is it possible that I can keep the id (parameter) in the phycisal layer which I'm passing to the function, so that I can join neccasy in the physical layer with fact/Sun to the stored procedure.
  
  is the possible creation of mutiple stored procedure in physics if my function to only return a single column.
  
  Concerning
  Issue

  If I understand your question, you have a function that returns a numerical value based on an ID, we'll call it Customer ID as a sample. What you need to do is to create a view like this:

  CREATE THE VIEW IN CIRCULATION
  SELECT CUSTOMER_ID, get_outstanding (CUSTOMER_ID) FROM CLIENT

  You can then query this view like this:

  SELECT * EXCEPTIONAL WHERE CUSTOMER_ID = 999

  You could also use this point of view in your physical layer and attach it by customer ID. If you already have a table of facts, you could put a top view to add the extra column with your function. It of all good and should work fine with a warning. PL/SQL execution on SQL functions is not effective. Oracle has switch context between SQL and PL/SQL for each line and change in context is an expensive operation. In a proper system of DWH you préremplira your fact table with the results of get_outstanding for all customers so that there is no delay in the calculation it when OBIEE queries data.

• Simple question-how to call a stored procedure or function of apex?

  Simple question-how to call a stored procedure or function of apex?
  Thanks advance.
  Doug

  Hi Doug,.
  You can call a procedure or function of apex. It depends on what you want to do with the function or procedure. If you want to retrieve table data in a specific area, you can try something like this-

  The following statement creates the function get_bal on the oe.orders of sample table (PL/SQL is in italics):

  CREATE FUNCTION get_bal (acc_no in NUMBER)
  RETURN NUMBER
  IS acc_bal NUMBER (11.2);
  BEGIN
  SELECT order_total
  IN acc_bal
  Orders
  WHERE customer_id = acc_no;
  Return (acc_bal);
  END;
  /

  The function created in the previous example can be used in a SQL statement. For example:

  SELECT get_bal (165) FROM DUAL;

  GET_BAL (165)
  ------------
  2519

  hope this will help,

  Kind regards

  Pascal M
  http://Tajuddin.whitepagesbd.com

• Call the stored procedure, and bind parameters by name

  Hello

  I use the Oracle ODBC 12 c driver to pass values from one Interface to our database Oracle 11.2. The Interface software collects data from modbus protocoll and calls a stored procedure. Right now my syntax to call the stored procedure looks like this:

  CALL procedure-name ('STRING', 'Timestamp as String', numValue1);

  It works very well. Now, I have to add a default setting to my procedure. To stay flexible to make other changes, I want to call the procedure and bind the parameters by name. Release 10.2.0.1.0 ISC ODBC Notes:

  Added support for the named parameter, binding the parameters by name. ODBC Oracle driver now allows the application to specify the parameters of a stored procedure by name, in the procedure call. Named parameters are to be used in calls to stored procedures and should not be used in other SQL statements.

  So, it shouldn't be a problem to use named notation, but how do I do this in ODBC? I tried like this, but oracle returns an ora-00936 error of missing expression:

  call procedure-name (paramName1 = > 'STRING',= paramName2 > 'Timestamp as String',paramName3 = > numValue1).

  
  

  Thank you for your help.

  Finally, I was able to find the error. The syntax of the statement was very good. The problem was caused by another declaration that I edited before and the error has not attracted Attention immediately.

  Thanks for reading and looking for an answer.

• Block based on the stored procedure cannot modify Default_where clause

  Hi all

  I tried to create a block based on the stored procedure that it works very well with the result set for the refcursor. But if I need to add filters on the block using where clause in the palette of goods or

  using the property block set in where clause, it does not error but does not review filters .

  tried everything to you please let me know. This is a restriction whereby we can set filters on the block when we create the block based on the stored procedure.

  Thank you

  Check in Form Builder Help:

  Creating a block of data from a procedure that uses a ref cursor

  ... You can't pass a WHERE or ORDER BY clause clause in a stored procedure.

  But you can send your WHERE condition using the query Source Arguments.

  If the procedure is on the side of the database (not in the forms module), ensure that the procedure is not vulnerable to injection of SQL code.

  Kind regards

  Zlatko

• Execution of the stored procedure Oracle EF6 error.

  Hello

  Need help with the oracle error

  {"ORA-06550: line 1, column 8:"}

  PLS-00306: wrong number or types of arguments in the call to "sp_name".

  ORA-06550: line 1, column 8:

  {"PL/SQL: statement ignored '}

  This error occurs when the code runs the line in Vb.net application in Model Designer

  MyBase.ExecuteFunction ("sp_name" para1, para2, para3, dOBpara4, para5)

  I create the SSDL and CSDL, MSL files for oracle to MS SQL connection by the method mentioned in the link JasonShort - professional profile - CodeProject it worked perfectly fine without the stored procedures. I managed to insert, update, and delete records. Then, I created stored procedures for Insert, Update, Delete. It worked fine with MS SQL. I copied and updated oracle files respectively. I gives me the error mentioned above.

  I executed stored procedures in Oracle SQL Developer, and it works without error. But when it is executed via the model there is light of the error. Can anyone let me know the solution for this error. I'm using VS2010, EF6, Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  Thank you

  Prachin Soparkar

  Hello

  Sorry for the inconvenience. After I posted this question I took a break and saw that the error was nothing, but I had given FNAME as parameter name in MS SQL. In oracle when I created the sp I created the parameter with p_FNAME. Where the schema defined in the language SSDL and CSDL, MSL had to be changed to MS, but since I want to that it would be same in different databases, I choose to have changed it in oracle stored procedure. The error msg is confusing, it should be something not found parameter or incompatibility etc.

  Thank you

  Prachin Soparkar

• user_table should be used in the stored procedure.

  Hello
  
  I want to find my permanent table user_tables and then drop and recreate it,
  
  I can use this user_tables in my stored procedure for above purpose or is there any notice that must be used.
  
  SP is admin sp, used to run in offline mode.
  
  yorus truly
  
  Published by: 944768 on 10 February 2013 23:44
  
  Published by: 944768 on 10 February 2013 23:44

  944768 wrote:
  but I wanted to know that can I use user_table in above proc stored to conclude and then drop and create it when Everitt runs?

  Oracle manages two "flavors" of the stored procedure - copyright and rights of the Summoner. Rights of the DEFINER (default) is always performed under stored security area of the owner of the procedure no matter who calls it. So, if you ask USER_TABLES (or any display USER_, besides) within DEFINER rights stored procedure, you will get a list of tables owned by the owner of the stored procedure, not stored calling procedure. Rights (AUTHID CURRENT_USER) stored Invoker procedure is always carried out under the domain of the calller security. Therefore, if you are querying USER_TABLES (or any display USER_, besides) within the Summoner rights stored procedure you will get a list of tables belonging to the appellant a stored procedure. Hope it answers your question.

  SY.

• Error on the definition of the stored procedure in the simultaneous program

  Hello
  
  I created a stored procedure and wanted it attached to the concurrent program. The purpose of this stored procedure when you run it in simultaneous program, the system retrieves the data from the csv file downloaded from the server, then it will insert in the tables of SO / the Interface API. Below, the error occurred.
  
  
  * Starts * 18 April 2012 18:18:42
  Error ORACLE 6550 in FDPSTP
  
  Cause: FDPSTP failed due to the ORA-06550: line 1, column 7:
  PLS-00306: wrong number or types of arguments in the call to 'SPKO1 '.
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  
  Steps I did to set the stored proc
  < < simultaneous executable program > >
  
  Executable: RDRAGON_SO_IMPORT
  Short name: RDRAGON_SO_IMPORT
  Application: Order management
  Method of execution: PL/SQL, stored procedure
  Run file name: SPKO1
  
  < < concurrent program - set > >
  
  Program: RDRAGON SO IMPORT
  Short name: RDRAGON_SO_IMPORT
  Application: Order management
  Name of executable: RDRAGON_SO_IMPORT
  Method: PL/SQL, stored procedure
  
  Format: text
  No set
  
  -Here are my stored procedure-
  
  
  CREATE OR REPLACE PROCEDURE APPS. SPKO1 IS
  FH UTL_FILE. TYPE_DE_FICHIER;
  v_line VARCHAR2 (32767).
  v_source_id NUMBER (10);
  v_created_by NUMBER (10);
  v_creation_date DATE;
  
  v_org_id NUMBER (10);
  v_orig_sys_docref VARCHAR2 (50);
  V_Customer VARCHAR2 (360);
  v_customer_prev VARCHAR2 (360);
  v_sold_to_org NUMBER (10);
  
  v_orig_line_ref NUMBER (10);
  v_item_code VARCHAR2 (2000);
  v_ordered_qty NUMBER (10);
  v_selling_price NUMBER (10);
  v_count NUMBER (10);
  v_stat NUMBER;
  
  
  /******************************************************************************
  NAME: SPKO
  PURPOSE:
  
  REVISIONS:
  Worm Date Description of the author
  --------- ---------- --------------- ------------------------------------
  1.0 16/04/2012 administrator 1. Created this procedure.
  
  NOTES:
  
  Keywords to replace automatically available Auto:
  Object name: SPKO
  SYSDATE: 16/04/2012
  Date and time: 16/04/2012, 17:55:42 and 16/04/2012 17:55:42
  Username: admin (set in Options of TOAD, editor of the procedure)
  Name of the table: (defined in the dialog box "New PL/SQL object")
  
  ******************************************************************************/
  BEGIN
  v_source_id: = 6;
  v_created_by: = - 1;
  v_org_id: = 204;
  v_customer_prev: = null;
  v_orig_line_ref: = 0;
  v_stat: = 0;
  
  SELECT header_id in (DE) v_orig_sys_docref
  Select header_id
  of OE_ORDER_HEADERS_ALL
  creation_date desc order
  ) WHERE ROWNUM = 1;
  
  
  FH: = UTL_FILE. FOPEN ('XXANDDIR2', 'myfile1.csv', 'R', 32767);
  < < file_read_lines > >
  LOOP
  BEGIN
  UTL_FILE. GET_LINE (fh, v_line);
  
  V_Customer: = LTRIM (RTRIM (REGEXP_SUBSTR (v_line, "[^,] +' 1, 1") ',' "') ','" ');
  v_creation_date: = LTRIM (RTRIM (REGEXP_SUBSTR (v_line, "[^,] +' 1, 2") ',' "') ','" ');
  v_item_code: = LTRIM (RTRIM (REGEXP_SUBSTR (v_line, "[^,] +' 1, 3") ',' "') ','" ');
  v_ordered_qty: = LTRIM (RTRIM (REGEXP_SUBSTR (v_line, "[^,] +' 1, 4") ',' "') ','" ');
  v_selling_price: = LTRIM (RTRIM (REGEXP_SUBSTR (v_line, "[^,] +' 1, 5") ',' "') ','" ');
  v_orig_line_ref: = (v_orig_line_ref + 1);
  
  If v_stat = 0 then
  v_orig_sys_docref: = (v_orig_sys_docref + 1);
  end if;
  
  SELECT hca.cust_account_id from v_sold_to_org
  OF hz_cust_accounts AOB.
  HP hz_parties
  WHERE hca.party_id = hp.party_id
  AND hca.request_id is null
  AND hp.party_name = v_customer;
  
  If v_stat = 0 then
  INSERT INTO OE_HEADERS_IFACE_ALL)
  order_source_id,
  orig_sys_document_ref,
  org_id,
  CREATION_DATE,
  created_by,
  last_update_date,
  last_updated_by,
  operation_code,
  sold_to_org_id,
  booked_flag)
  VALUES)
  v_source_id,
  ('TEST' | v_orig_sys_docref).
  v_org_id,
  v_creation_date,
  v_created_by,
  v_creation_date,
  v_created_by,
  "INSERT."
  v_sold_to_org,
  'Y') ;
  commit;
  end if;
  
  INSERT INTO OE_LINES_IFACE_ALL)
  order_source_id,
  orig_sys_document_ref,
  orig_sys_line_ref,
  inventory_item,
  org_id,
  ordered_quantity,
  unit_selling_price,
  unit_list_price,
  CREATION_DATE,
  created_by,
  last_update_date,
  last_updated_by,
  operation_code)
  VALUES)
  v_source_id,
  ('TEST' | v_orig_sys_docref).
  v_orig_line_ref,
  v_item_code,
  v_org_id,
  v_ordered_qty,
  v_selling_price,
  v_selling_price,
  v_creation_date,
  v_created_by,
  v_creation_date,
  v_created_by,
  "INSERT");
  commit;
  
  v_customer_prev: = v_customer;
  If v_customer_prev = v_customer then
  v_stat: = 1;
  on the other
  v_stat: = 0;
  end if;
  -DBMS_OUTPUT. Put_line ('Col1: ' | v_source_id |', Col2: ' | v_creation_date |', Col3: ' | v_created_by |', Col4: ' | v_updated_date |', Col5: ' | v_updated_by);
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  OUTPUT file_read_lines;
  END;
  END LOOP;
  SELECT count (*) in the OE_HEADERS_IFACE_ALL v_count;
  DBMS_OUTPUT. Put_line (' record Total inserted successfully: ' | v_count);
  UTL_FILE. FCLOSE (FH);
  
  END SPKO1;
  /
  
  
  But when I run the stored procedure using TOAD his work.
  
  Help, please. This is my first time to attach the stored procedure in the concurrent program.
  
  Thank you very much.
  
  Kind regards
  Diane
  
  Published by: peopsquik08 on April 18, 2012 03:58

  as clive_t solier
  >
  You must explicitly reference the settings out
  >

  Try

  DECLARE
  VFILE VARCHAR2(32767);
  V_SOURCE_ID NUMBER;
  --
  ERRBUF VARCHAR2(200);
  RETCODE NUMBER;
  
  BEGIN
  VFILE := 'myfile1.csv';
  V_SOURCE_ID := 6;
  
  --APPS.OMORDERLOADER.SPKO1 ( VFILE, V_SOURCE_ID );
  --COMMIT;
  
  APPS.OMORDERLOADER.SPKO1(
      ERRBUF => ERRBUF,
      RETCODE => RETCODE,
      VFILE => VFILE,
      V_SOURCE_ID => V_SOURCE_ID
    );
  END;
  

  but the code above to test your proc

  to run concurrent SQL, you can use fnd_submit.submit_program

• Can not see all the stored procedures in the Entity Data Model Wizard

  I hope it is a simple oversight on my part I try to use the new beta version of odp.net with entity framework support. I can open the Entity Data Model Wizard, give him my information database, and I can choose various tables to use successfully. But in the list where I select the tables, views and stored procedures, the wizard does not see my stored procs or my point of view.
  
  Does anyone know why he would see the tables but not views or stored procedures? My procs can be found under "packages" If that makes a difference. I tried to create a fictional stored procedure at the level above the title of 'procedures', but it is unclear whether.
  
  Is it possible for me to debug this from here? The log files, I could watch that would help me?
  
  Thank you
  Jim

  I belive your Oracle database 10 g such as 9iR2 predates.
  ODP/EF Beta does not list the stored procedures or functions when connect you to a database Oracle 10 g before.

  Readme.txt:
  4. the procedures are not compatible with the DB 9.2.
  Thus, there is no stored procedure listed by the EDM Wizard for 9.2 DBs.

• In a table - looping through the rows and the stored procedure call

  APEX version: 3.2.0.00.27
  
  Hello
  
  I searched the forum and tried a few things but could not make it work.
  
  I have a tabular presentation, developed with the help of the ATD (Cascading LOV - method of tabular presentation - AJAX - ATD )
  
  What I'm trying to do now:
  -After submit and validations, loop through all the lines and
  -call a stored procedure passing 3 parameters obtained from each of the lines on the form of tables. This procedure will be an update of a database table.
  
  On the forum, I found that I could do the loop "* FOR i IN 1..." APEX_APPLICATION.g_f03. "LOOP COUNT *" syntax.
  
  Only for testing purposes, I tried just to view information with the following (On Load - after a footer) process (example of Denes Kubicek == > http://deneskubicek.blogspot.com/2009/05/execute-javascript-throuhg-plsql.html):
  

  declare
    v_today  varchar2 (200);
  begin
  --  :P40_test := APEX_APPLICATION.g_f03(1);
  --  :P40_test2 := APEX_APPLICATION.g_f04.COUNT;
    :P40_test2 := 100;
  
    v_today := to_char (sysdate, 'dd.mm.yyyy');
  
  --FOR i IN 1.. APEX_APPLICATION.g_f03.COUNT LOOP 
  
    :P40_test := APEX_APPLICATION.g_f02(2);
  
    HTP.p ('<script type="text/javascript">');
    HTP.p (   'alert(''Today is '
            || v_today
  --          || APEX_APPLICATION.g_f04(APEX_APPLICATION.g_f03(i))
            || '.\n'
            || 'end!'');'
           );
    HTP.p ('</script>');
  
  --    :P40_test := APEX_APPLICATION.g_f02(APEX_APPLICATION.g_f02(i));
  
  --END LOOP;
  
  end;

  The foregoing would give me a ' * ORA-01403: no data found * ' message. I tried through various variants of APEX_APPLICATION.g_f0* #*, but still can't get anything to display correctly. In commenting on all the lines referring to APEX_APPLICATION.g_f0x above, the date would be are they displayed fine.
  
  I tried uncomment the FOR... LOOP and play with the code (defining the process runs "On submit - after calculations" and Validations), I got was a ' * ORA-06502: PL/SQL: digital error or value: character conversion number error * "message.
  
  Here is the script of the form in a table:

  select 
  "V"."MSLINK",                                       -- hidden (number)
  "V"."INSTALLATION_DATE",                        -- editable date picker
  "V"."MANUFACTURER_INDICATOR",              -- editable (cascading LOV -- text)
  "V"."MODEL_INDICATOR",                           -- editable (cascading LOV -- text)
  "V"."DIAMETER_INDICATOR",                      -- editable (LOV -- number)
  "V"."PURPOSE_INDICATOR",                        -- editable (LOV -- text)
  "V"."VALVE_NUMBER",                                -- shown but not editable -- number
  "V"."MODIFY_DATE",                                  -- shown but not editable
  "V"."MODIFY_USER",                                   -- shown but not editable
  "V"."VALVES_STYLE"."FEATURE"                  -- shown but not editable -- number
  from "#OWNER#"."VALVES" "V"
  Where
    "V"."PROJECT_ID" = :P1_PROJECT_NUMBER AND
    "V"."VALVES_DFLAG" = 0

  Regarding the parameters for the stored procedure, it would the MSLINK, VALVE_NUMBER and the VALVES_STYLE. FEATURE.
  
  Help, please!
  (Sorry for the long post).
  
  Thank you
  
  Tan

  Hi, Tan,

  I have not seen that type of object - I've only used custom types for purposes of test years ago and have never used their within Apex!

  One possibility is that the value of checksum being is based on all of the content of these fields, rather than only the part of the FEATURE. If there are other parts of the object, you could include those items as well.

  Otherwise, as you f01 KP for a record, you will need to retrieve the values of the FUNCTION in your PL/SQL code directly from the table (because the user cannot modify these fields, you can be sure that the values in the table will be still valid).

  Andy

• How to view the run log in the stored procedure?

  Hello
  
  I'm working on a project of migrating from Sybase to Oracle (10g).
  
  On Sybase, when I run a stored procedure, it will connect to the console as:
  100 rows inserted
  200 rows affected
  ...
  
  One line per request in the stored procedure.
  
  
  Oracle, I only: 'Procedure completed successfully' (Yes, I'm french :-)
  
  
  Is there a way to get the logs for each request in my stored procedure?
  -An option?
  -One command after each request?
  
  
  Thanks in advance.

  user9321154 wrote:
  OK, it's great.

  Otherwise, there is not an option on Oracle to achieve this same result automatically.

  No, if you want to do this, you must do it yourself. PL/SQL is a real language, not a script like T - SQL language. Therefore, it is the procedure that one is successful or not, not every instruction.

  You should also be aware that if you use % ROWCOUNT SQL to get the number of rows processed and DBMS_OUTPUT. Put_line to show them on the screen, that the output will not appear before once you have completed the process, not as each DBMS_OUTPUT statement is processed.

  If you want to t shelves where in the procedure, you will need to insert the release of record in a table by using an autonomous transaction or something like UTL_FILE use to write the instructions in an o/s file.

  John

• Using the stored procedure

  We use the procedure attached to within an ASP application obfuscation of the password database. I am able to use the same procedure in CF without modification? Right now, I have tried with cfstoredproc but'm "Procedure 'dt_External_Encrypt' expects parameter '@Encrypted', which was not supplied."
  
  
  
  

  You do not use the ODBC driver.

  Most likely, there is a typing error in the code or the stored procedure is not also displayed (or a copy).

  Change procedure = "dt_External_Encrypt" to procedure = "dbo.dt_External_Encrypt" "

  Open Query Analyzer, 'Edit' code stored procedure and make sure that it is really such displayed.

  Finally, try changing returnCode 'no '.

  If all else fails, join the code exact CF code and code from Query Analyzer.