Question GPU MBP 17 beginning 2011

Similar Questions

• Best battery OEM for MBP 13 beginning 2011

  Hello everyone from Apple!

  I ask your opinion about the replacement of the battery for my MBP 13 early 2011 (MC700).

  In my view, there are a lot of OEM batteries on amazon / ebay.

  What is the best for a good price (less then $ 40)?

  Thanks in advance.

  None in your price range.  Based on the collective experience of participants veterans of ASC, NuPower batteries from OWC and Anker brand are the only ones I recommend currently.  If you search these forums, you will find that many "bargain" battery produced a low yield and the many stories of misfortune.  In the long term, their cost is often more than a quality battery.

  Ciao.

• Graphics problems MBP 13 beginning 2011

  MacBook pro has recently started posting ripped out windows, disordered once it has been for a while.

  It looks like the screen tearing or test models, then each window or the image clicked on it do until the system crashes.

  Could this be graphics driver corrupt or bad graphics card?

  Also noticed a few global slowdown.

  In early 2011, Intel i5; 16G Ram; Intel HD 3000 graphics card.

  Thank you

  Jean

  take a genius Bar appointment to get your mac tested. This program CAN be applied, but the test takes 12 minutes, unless it fails at first. be early and ask for the VST test:

  https://www.Apple.com/support/MacBookPro-videoissues/

  .

• What windows and Boot Camp for MBP 13 end 2011

  I have a MBP 13 end 2011. I want to install Windows 8.1 to launch my CAD software. I use Boot Camp Assistant 6. I run on OS X and have 4 GB of ram. Is this ok or are there other options recommended?

  Models 13 inches have the GPU from Intel. Your Mac has an Intel HD3K. Older versions of the software may perform better, but more recent versions can be slower on older hardware. What is the possibility of using a dual-GPU MBP? The more RAM, the better it is.

• Questions asked by a beginning.  CF, HTML, change of name/path of the folder and the addition of home page.

  
  Questions asked by a beginning. CF, HTML, change of name/path of the folder and the addition of home page.
  Hello, I got this new job and I'm trying to understand it as soon as possible. I'm a complete newbie to html, CF and web development
  Yes, I caught a few books, but if you can help me. I appreciate a lot is.
  
  I have this file structure
  Z:\ToExport\RepDocs\MyReport
  Pointing to this one
  http://myserver/MyReport/
  You will find a folder of MyReport
  And find 2 .cfm
  1 index
  2 version.cfm
  I have 2 BIG questions, ok 3
  
  HOW TO MAKE A PAGE THAT WILL CONTAIN
  The link of this MyReport.
  A home page. In other words.
  
  Homepage that contains a main report text
  Name of the division_
  
  Then a link called my reports. And your report
  Prefereably sorting
  
  · My reports.
  · Your report
  
  
  HOW CAN I CHANGE THE FOLDER
  Of
  Z:\ToExport\RepDocs\MyReport
  Pointing to this one
  http://myserver/MyReport/
  TO
  Z:\NewExport\repmining\myreport
  
  And then tap on it
  http://myserver/ repmining\myreport
  
  
  WHY IS THE REPDOCS NOT TYPED IN THE BROWSER WHEN YOU VIEW the MYREPORT. (I don't have to type (repdocs) to view the report)?
  in other words:
  Z:\ToExport\RepDocs\MyReport
  Is typed
  http://myserver/MyReport/
  
  without repdocs.
  
  Please excuse me.
  I am a true beginner.
  
  Thank you.
  Hope someone replies soon.
  Take care.
  
  

  OK, I think I understand your questions, so here:

  Quote:
  HOW TO MAKE A PAGE THAT WILL CONTAIN
  The link of this MyReport.

  Just have a link on a page, e.g.:
  TEXT of the LINK,
  As for your question on your reports, I don't understand what you're asking

  Quote:
  HOW CAN I CHANGE THE FOLDER
  Of
  Z:\ToExport\RepDocs\MyReport
  Pointing to this one
  http://myserver/MyReport/
  TO
  Z:\NewExport\repmining\myreport

  And then tap on it
  http://myserver/ repmining\myreport

  If you are directly connected to the server, simply create a folder (what looks like) Z:\ToExport\RepDocs\ which is the new name of Fortin, ex:
  Z:\ToExport\RepDocs\NEW_folder and put the files into it. If you are now directly connected to the server, use a program such as FTP server to connect via FTP and do the same thing.

  Quote:
  WHY IS THE REPDOCS NOT TYPED IN THE BROWSER WHEN YOU VIEW the MYREPORT. (I don't have to type (repdocs) to view the report)?
  in other words:
  Z:\ToExport\RepDocs\MyReport
  Is typed
  http://myserver/MyReport/

  It is simply because http://myserver/Myreport/ is set to point to the Z:\ToExport\RepDocs\MyReport file so it looks http://myserver is set on the Z:\ToExport\RepDocs\ folder anything you add to a folder which will be included.

  I have IE hop answered some of your questions

• Question of Macbook Pro OS beginning 2011.

  I have an early 2011, Macbook Pro, Mac OS x, Version 10.7.5, with 4 GB of memory.  I've never upgraded to another operating system and want to know if I have to and if my Mac can support the El Capitan?  Thank you.

  Larkin108

  Hey Larkin 108,

  From the information provided, you can switch to the latest version of our operating system, OS X El Capitan, if you wish.   Before you do, make sure that the third-party hardware and software that you use all the time are compatible with OS X 10.11.3.  In addition, be sure to back up your computer via Time Machine before making any big changes to your system.

  What's new in OS X El Capitan

  Use Time Machine to back up or restore your Mac

  Update of OS X El Capitan

  See you soon!

• Cannot add an external optical drive at the beginning 2011 MBP. Any thoughts?

  OS X El Capitan, 10.11.2 running version

  I removed an internal optical drive to add the SSD drive and bought an external optical drive to Apple for these occasions requiring a. Any help would be appreciated.

  I do not see a specific question - help with WHAT, exactly?

• MBP Pro early 2011 starts after reset of the SCM

  So for the last two days my MBP early 2011 has abnormally slow fonctionnee. I use it mainly for music production with logic. For the last few days it has been slow and the sound was clipping out of my mbox in the smallest size of buffer when it the value never done before. I'm running el Capitan with a processor 2 GHz and 16 GB of RAM. I'm still about 134 left Go of the 500 original, it came with. So I decided today to restart it since he turned slowly and while doing that I have reset the SMC and since then it won't restart. It stays on the screen with the loading bar almost full load and just gets stuck. I hear the hard drive by clicking on, but I don't know what to do. I fix a genius bar appointment for Thursday but I need my MBP now so far here and I'm afraid of what they tell me. Any Suggestions guy? Thanks in advance.

  Got it working guys. Did a check and found some malware on it. Remove malware and all works well.

• question iMac i7 to power 2011

  Greetings,

  I think I'm having an interesting eating problem and I hope that someone with an Apple hardware experience could read this before blindly, I replace the power supply (and spend money, I don't).

  I have a 2011 27 "iMac12, 2. Model A1312 EMC No. 2429, iMac Core i7 3.4 GHz. 12 GB of memory running 10.9.5 with the latest updates. 8 GB of third party RAM and an SSD of third with OWC temperature sensor cable. Fans will work perfectly and normally respond with this SSD and cable.

  This is a long post, but I think I describe an interesting problem. So read on if you want. Otherwise - thanks anyway.

  I am an electronics engineer and use Macs for a long time. But don't have the inside scoop and experience with the power of the iMac and logic boards, maybe an Apple technician will see this and be able to answer a few questions I have.

  This computer has been great for years of work but began acting strangely in the last week. I noticed that he wouldn't wake up from his sleep, and then I noticed during active use would block after about 45 minutes or an hour or two.

  Sometimes, I'd get the (pizza wheel) spinning wait cursor when in the finder, then for each open application that I would try to activate it once that this started happening I couldn't recover from it. The box to force out would not come to the top. Only a (switch) forced shutdown and restart would bring the computer to life.

  When the problem occurs, I'd get the spinning wait cursor, no response from the keyboard. Windows remains visible on the screen can be moved, but otherwise don't would not respond and applications would hang.

  When you run properly, the OS and applications behave normally and appear to be catchy as ever.

  I did a lot of troubleshooting. It felt like a problem of material for me.

  I first turned off the Bluetooth, then removed all external devices and connected a wired keyboard and mouse. The problem occurs when you are logged in different user accounts and not appear related to a specific application. When she fails the computer stops responding on the network as well.

  I started in safe mode which did not help.

  I ran after each failed disk utility and reboot. The third internal SSD seems fine and passes check and permissions check every time.

  I did a virus scan. No detection.

  I ran the diagnostics of material. Usually happened, he only missed once during the test expanded memory after an hour. I then removed the 8 GB of RAM third leaving only the original Apple 4 GB of RAM installed. The successful test material. Sounds like bad RAM?

  No, Frost continues with only the Apple installed memory. I think the hardware test failed, because the power supply problem would happen after a time anyway.

  I turned off the screen saver and sleep so I could see the contents of the screen when it failed and during that time, tried to use the machine for a normal job. I have to prepare taxes and screen 27 "is very useful at the time so I can open lots of windows. But the computer crashes as I get into my work.

  Finally, I pulled my copy of HardWare monitor (v4.99) and noted the various sensors. I noticed that the voltage sensor shows two voltages, 12 volts for the MXM graphics module which seems stable and right around 12 volts.

  The other specified voltage is the provision of CPU. I guess this is supposed to be 1.2 volts. But it varies - much.

  The offer varies 1.2 Volt to as low as 0.87 volts. It must be the way out of the standard if it is supposed to be a supply of 1.2 volt.

  So the first question, is that really supposed to be 1.2 volt? I don't know about you, but this makes sense to me.

  Then the provision of 1.2 volt regulated on the power Board or regulated on the logic board? In other words, replacing the power supply would be an interesting test?

  But here's the interesting part: the voltage INCREASES to 1.2 volts and becomes stable if I give compliant to do computing. I started to run the chess playing program computer vs computer. The tension immediately stabilized at 1.2 volts and looked good! I was expecting to fall!

  Who knows what is happening with this switching power supply? The increase in workload may actually it wrong in appropriate regulations. That being the case, I'll keep the computer play chess in the background while I work on my taxes that I monitor the voltage and see if this prevents crashes until I can replace the power supply, or something else.

  Thanks for reading.

  Greetings,

  I solved this problem. It was pretty weird. On the way, I discovered that it is normal that the voltage of the CPU has to vary, it is a feature of the processor Intel 2600 for energy savings. I discovered that gel that happened exactly one hour after re-powered to the top of my iMac. Exactly. It was too weird. It turns out that my Crucial SSD drive has a bug in the firmware that comes after 5200 hours of operation and then every hour thereafter, requiring a power cycle to get it going again. The problem is described here. I'll replace the SSD with a larger (from another manufacturer!) rather than trying to update its firmware.

• Question GPU on Qosmio G30

  I have a problem - it seems that the GPU is fried on my Qosmio G30.
  But the problem is that I bought my laptop in Russia and now I'm in the United States.

  So the question is - is it possible to repair my unit in the United States?

  Hello

  All Toshiba laptops are covered by a warranty one year international limited in the workshop.

  Since it is an international interest, the laptop could also be repaired in the United States.
  That s my personal opinion.

  But everything else should be clarified with the authorized service provider.

  So, my recommendation is. Contact the ASP United States and ask for later handling.

  Goodbye & good luck

  PS; Do you know where to find the details on Toshiba ASP worldwide?

  Check this box:
  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

• Qosmio X 770-107 - question GPU acceleration and low of the FPS game while

  Hi all

  As everyone knows (i) hope including Toshiba tech we face breakdowns of sparks/Framerate GPU limitation/Low FPS during the game, even in the game of old or new brand and down or in the highest video settings.

  So lets start with the history of the mine: I bought my Toshiba Qosmio x 770-107-3D about $2600 so I was in Qatar to the 13.04.2012... In fact since the beginning of the purchased when I am faced with this famous problem of limitation GPU... I tried a lot of things, cleaning the fan, bios and driver chart updated-decommissioning, using software overclocking, combining different versions of graphics drivers with different versions of bios drivers, also including the suggestions in this tread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63615

  2 days ago, I sent an email to Toshiba UK support and local support. Unfortunately I have no answer, I probably wouldn't be as usual. And I left one term of 7 months. As everyone knows; even if I sent it to Toshiba repair service, 99% they say the fault of the user or the dirty vere fans and we reflash the bios. who has no sense for us and they're going to get him back without GPU acceleration problem soving...

  In summary that I am out of options, I'm really tempted to try to solve this problem of trottling gpu...
  Maybe I should sent cell phone service and with their report of nonsense I should consider rights costumer Court in my country... will be 4 to 6 months, but in the end 90% I win.

  I am really bored and tired of playing the games lag in every 10 minutes.
  Yesterday, with and without external display, + with slot and overclocking, + video settings further down, I played Company of heroes 2 and Battlefield 2 and 4 with ventilation of the limitation and the new GPU framerate... it's totally waste of money and my time of 2 years. I want to buy alienware instead of Qosmio 2 years...

  What should I do? You really have a permanent solution for this? I await your comments.

  Win7
  BIOS v2.10
  Graphics driver v33x.x

  Kind regards.

  I read the reviews of users and customers in the thread you link above and it seems that the limitation issue was already resolved. The combination of the BIOS (v1.1?) and nVidia Driver seems to be the key.

• MBP 15 "Early 2011: some keys not working not

  Hello Experts,

  I'm on a MacBook Pro 15 "early 2011 10.11.3 on OS X El Capitan.

  Now, some keys on my keyboard doesn't work anymore, only F1 - F9 (F10 - F12 still works fine) and the right SHIFT key.

  I read some other threads about this here, tried SMC-reset, reset PRAM, no change at all. (After reset the SMC he worked shortly, but after about 15 minutes even error.)

  FN + F1 - F9 does not either.

  Also, I checked my console to find errors, that's what I get when I press F1/F2.

  ATTENTION: assert (-1! = internal) failed in the function-[DeviceGammaContext isInternal]: 2096 in file /Library/Caches/com.apple.xbs/Sources/AmbientDisplay/AmbientDisplay-58/Sources/ DeviceGammaContext.m

  This error no longer appears.

  I have to say, I got my Logicboard exchanged 1 week ago by an Apple Technician due to the graphic problem common with the older MBP.

  Can it be a coincidence? It has something to do with the keys without work?

  Thanks in advance for your help

  Chyllie

  EDIT: There was no liquid spilled on the keyboard, or something similar, also when I plug in an external keyboard (non-apple) the right shift is working on it and also the buttons Play/Forward.

  It was a bad connection to the logicboard, for all who have the same problem!

• Question of AirPlay with mid-2011 EL Capitan-ATV2 MBA

  Hello

  I'm not able airplay for ATV 2 of my MBA mid-2011 with the latest version of EL Capitan.  Airplay works perfectly fine with my iPhone and ATV 2 software up-to-date 6.  The MBA Firewall setting is also disabled. Any help / tips to solve this problem?

  Thank you

  You have the icon in the project for ATV in the menu bar of the MBA?

• I have a MacBook Pro, beginning 2011, just upgraded to 8 Ram and have the storage capacity of 500 GB.  I need more storage for photos.  How much more can my grip of Mac, and it makes sense to add a computer that old?

  I'm trying to decided if I should try to add more storage to my lap top existing, or buy a new one with more memory.  I am a Photogaphy and need a lot of storage.  I have a MacBook Pro, in early 2011, just upgraded to 8 GB of Ram so I could upgrade to OSX E Capitan and add new software. I have 500 GB storage now and need a lot more. Would love 2 TB or more.

  What is the maximum I can add to my laptop? And does make sense to do?

  On the largest practical size warehouse readers coming always internally are about 1, 000 GB.

  To go more than you would have to decide if the portability was an important issue, because additional disks should probably be external. The Mac can support dozens of external hard drives. If you do not carry them, 'office' readers are faster and can be found in larger sizes. Their PIN 12-volt Motors require a lot more power that can be provided using Bus power, while they use their own power supplies.

• Is it possible to upgrade my MBP 13' end 2011 to 16 GB of RAM is 8 GB per slot?

  I want to upgrade the RAM for my MBP. In fact, I have 2 GB per slot and I want to move to 8 GB per slot.

  Yes: To ensure that the specifications are: 204 pin PC-10600 (1333 MHz) DDR3 SO-DIMM.

  The best sources for RAM compatible Macs are OWC and Crucial.

  Ciao.