question: how to find the color temperature in a psd?

Similar Questions

• Satellite A210-109: how to change the color temperature of the display?

  I want to know how to change the color temperature of the screen of my laptop? Theres no option in the ATI catalyst and no toshiba utility, where I can change this? I have the latest installed toshiba display drivers.

  Hello

  you mean the gamma settings? I don't know if the ati drivers are able to do, but you can try the program "powerstrip" (www.download.com/PowerStrip/3000-2086_4-10395724.html), which can change the color and the parameter gamma for graphics cards.

  Just give it a try and you will get your favorite color settings. :)

  Welcome them

• Find the color temperature of light source with neutral card

  Hi all;

  I have an adjustable color LED strip that I would get as close as possible to 6700 Kelvin. I hope that I can take pictures of a neutral light card and set the LED color based on temperature/RGB values, I get Lightroom (5.7.1).  Is this possible? If anyone can help with the workflow on how to do it?

  Thank you very much

  I was afraid of that. The numbers only make sense for a radiator of black body like a tungsten light bulb or the Sun, which is a broadband light source. CFLs are generally pretty well made using a series of Phosphors of rare earths that are tuned to human vision and with emissions enough broadband. If you use several sources of monochromatic light as single color LEDs you could not get good numbers. It really depends on the wavelengths of light coming out of the LED. If the color on your camera filters are not the same wavelength of the LED and the sensitivity of three colors of the sensor of the camera is not the same as your eyes, you can get to a situation where your eye perceives neutral colors while the camera sees something completely not neutral. This is from your two raw files. Your illuminated LED Gray card probably looked to the eye, but to the camera, it looked purple. This effect is called Metameric failure and is common if the spectrum of light is very "spicy". This is probably what is happening in your case. You have certainly three narrow band LEDs that you mix. You are really unable to apply the model of the black body of "color temperature" unique to it and then you get strange results you observe. There are index to record high in special colours of the LEDs, which have much wider spectrum light show who have far fewer problems with Metameric failure and that should work for this purpose well.

• LR 6.3 - How to set the color temperature in units of 50?

  Recently updated to 6.3 LR LR 5. In LR 5, I could click on the color temp box and drag left and right to adjust the temperature of color 50 increments of unit. Now, it will sometimes start 50 unit increments, but then if I drag further, it starts to change the setting in random numbers. I know that this is normal behavior for the actual slider, but I would get the 50 backstroke of function setting unit when clicking / sliding on the box color temp. Thanks for any help.

  If you use the upper and down arrows instead of the mouse, the increment is 50.

  If you do the more wide Panel, you get a finer granularity with the mouse, movements, but which removes the space in the picture display.

• How to find the ADDRESS, HASH_VALUE of V$ SQLAREA for a request to purge?

  I read on how to use the INVALIDHTOMEH package to remove an application from the shared pool.
  
  I'm looking at the example on this page:
  
  https://blogs.Oracle.com/Mandalika/entry/oracle_rdbms_flushing_a_single
  
  He gives an example of:
  
  SQL > select ADDRESS, HASH_VALUE of V$ SQLAREA where SQL_ID like '7yc % ';
  
  ADDRESS HASH_VALUE
  ---------------- ----------
  000000085FD77CF0 808321886
  
  My question how they find the SQL_ID of the query they are wanting to be served before this step?
  
  
  Thanks in advance,
  
  Cayenne

  >
  How did find the SQL_ID of the query they are wanting to be served before this step?
  >
  They probably got from V$ SQL

  select sql_id, plan_hash_value, exact_matching_signature, sql_plan_baseline from v$sql
  where sql_text = '. . put your query here . . .'; 
  

  Make a request like this or use WHERE SQL_TEXT LIKE if you know a part of the text of the query. Then use the SQL_ID.

• How can I find the color button oil in photoshop 2015

  How can I find the color button oil in photoshop 2015

  Please check this thread and add your '+ 1' If you want to.

  Photoshop CC 2014: What happened to the oil paint filter?

• How to find the name of the color for a PDEElement space

  Hello

  I'm trying to find the color for each PDEElement space in my PDF file. While doing this,
  I put some (cost stmts) debugging statements that print the color_space as of integer values. I gave this list
  After the code.  I think that color space must be something like CMYK, DeviceRGB and DeviceGray... etc.

  How can I know the name of actual color space corresponding to these numbers printed in the instructions for debugging.

  Please please help me...

  Sub ProcessElementDetails (PDEElement element)
  {
  PDEGraphicState gfx_state;
  ASInt32 pdeType = PDEObjectGetType (reinterpret_cast < PDEObject > (item));
  ofstream outfile("E:\\temp\\test.txt",ios::app);
  outfile < < "ProcessElementDetails\n";

  If (pdeType is kPDEText)
  {
  outfile < < "text PDE type\n";
  PDEText pde_text = (PDEText) element;
  ASInt32 num_run, i.;
  num_run = PDETextGetNumRuns (pde_text);
  outfile < < "number of tracks for PDEText: ' < < num_run < < '\n'; '"
  for (i = 0; i < num_run; i ++)
  {
  PDETextGetGState (pde_text, kPDETextRun, i, & gfx_state, sizeof (PDEGraphicState));
  ASAtom color_space = PDEColorSpaceGetName (gfx_state.fillColorSpec.space);
  outfile < < "color space:" < < color_space < < '\n ";
  }
  }

  
  If (pdeType is kPDEImage)
  {
  outfile < < 'Image PDE type\n ";
  PDEElementGetGState (element, & gfx_state, sizeof (PDEGraphicState));
  ASAtom color_space = PDEColorSpaceGetName (gfx_state.fillColorSpec.space);
  outfile < < "color space:" < < color_space < < '\n ";
  }

  If (pdeType is kPDEContainer)
  {
  outfile < < "PDE container type\n";
  Content PDEContent = PDEContainerGetContent (reinterpret_cast < PDEContainer > (item));
  NumElem ASInt32 = PDEContentGetNumElems (content);
  for (ASInt32 i = 0; i < numElem; i ++)
  {
  item = PDEContentGetElem(content, i);
  ProcessElementDetails (element);
  }

  }
  }

  Debugging statements with color numbers:
  ====================================
  ProcessElementDetails
  Image type of PDE
  Color space: 700
  ProcessElementDetails
  Type of text PDE
  Number of tracks for PDEText: 63
  Color space: 388
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 388
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 388
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  ProcessElementDetails
  ProcessElementDetails
  Type of text PDE
  Number of tracks for PDEText: 38
  Color space: 389
  Color space: 700
  Color space: 390
  Color space: 388
  Color space: 390
  Color space: 388
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 390
  Color space: 389
  Color space: 700
  Color space: 700
  Color space: 700
  Color space: 700
  Color space: 700
  Color space: 700
  Color space: 700
  Color space: 700
  SeparateColorPlates
  PDF file exists
  Number of Pages: 1
  Number of items: 5

  You need to read some more on what is a "ASAtom" and

  How to use them.

• How to find the question after hp support assistant opening when the icon indicates the red exclamation point?

  Hi guys,.

  A new pavilion g6 and sometimes get the red exclamation on the HP SA but when I open the screen of the wizard how to find the issue which marked the icon?

  The Assistant has just opened, and I see the screen normal but not extra "Pavilion" to tell me what needs attention?

  Is this normal?

  See you soon!

  Ian

  screenshot of open SA HP...

  

  Hello again, TheHandyCrowd, and ionamartin123.

  Made this suggestion solves your problems?  I was curious about the result.

  I hope that you are having a great day!

• How to change the color of pre-rendered screen.

  My question is how to change the color of the page that is displayed before a site is fully charged. So let's say I go to a site where the background color is red. Before the end of Firefox loading it will appear as white. Also yes I have known that I have an add-on which changes the default color of YouTube. However the first picture comes on all websites no matter if their background is white or not.

  You can try the userChrome.css code or elegant.

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  browser {background-color:#f0f0f0!important}
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
  • Paste the code in the userChrome.css file in the Editor window
  • Make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
    Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file

• How to change the colors of the ADF calendar from different suppliers?

  Hello again once I use JDeveloper, 11.1.2.3.0,

  This might be the third question I ask here on this subject, and until now, I didn't get any answer.

  CAN SOMEONE PLEASE PROVIDE AN EXAMPLE OR A TUTORIAL ON HOW TO CHANGE THE COLORS OF THE ADF CALENDAR ITEM?

  Sorry for asking again, but I find it very cool that nobody answers to these questions. Y at - it a bug or nobody knows really how to customize the calendar component?

  Hi user,

  Here a few steps:

  (1) create a bean

  (2) create a variable with the hash table data type, for example:

  private HashMap activityStyles = new HashMap<>, InstanceStyles > ();

  (3) create a method where you load the desired styles, for example:

  public void loadactivityStyles() {}

  try {}

  HashSet setconf = new HashSet();

  HashSet setnoconf = new HashSet();

  HashSet setadm = new HashSet();

  setconf. Add ("STATUS 1");

  setnoconf. Add ("SITUATION 2");

  setadm. Add ("STATUS 3");

  activityStyles.put (setconf, CalendarActivityRamp.getActivityRamp (CalendarActivityRamp.RampKey.GREEN));

  activityStyles.put (setnoconf, CalendarActivityRamp.getActivityRamp (CalendarActivityRamp.RampKey.ORANGE));

  activityStyles.put (setadm, CalendarActivityRamp.getActivityRamp (CalendarActivityRamp.RampKey.BLUE));

  }

  {(4) set the activityStyles variable in the calendar component property "activityStyles = #{myBean.activityStyles"}

  (5) set your field of Tag calendar (located in the Wizard) the field of the VO that contain the values configured in the method (1 STATE, STATE 2, STATE 3, etc.). It allows to to correspond with the activityStyles variable when running.

  (6) run and see the colors.

  Good luck.

  Jhon Carrillo

• How to change the color of Satellite Pro P300 settings

  I just received my new laptop computer and cannot for the life of me find how to change the color settings in the monitor.
  My old desk there was a button on the monitor.

  In a first time laptop user im nuts will try to find how to change my monitor settings...

  If anyone can help id be so grateful

  Please don t mix the portable computers internal monitor with external PC monitor.
  You won't find any control unit and on the external monitor that would help you to change the color.

  I put t know what your laptop smart chart uses but my laptop supports Intel graphics card and pre-installed (in Control Panel) Intel Graphics Media Accelerator provides a few color correction settings.
  The parameters are; color, gamma, brightness and contrast

  Here, you can set values between 0 and 100

  Maybe it's what you're looking for

• How to change the color of the Outline tab

  How to change the color of the Outline tab?  I want to use a black style on my test program but the functionality of the tab have a white edge on the top and left sides in an attempt to give a 3d look.  I tried to play in the windows style but had no success.  Does anyone know how to remove it or change the color?  The closest I got so far is to put a basic theme of windows 7, which removes the 3d aspect.  However, this gives a white background on the tab pages that I just can't find a way to change CVI or windows.  Any suggestions?

  Thank you

  Ok.  Thanks for the help.

• How to find the number of data items in a file written with the ArryToFile function?

  I wrote a table of number in 2 groups of columns in a file using LabWindows/CVI ArrayToFile... Now, if I want to read the file with the FileToArray function so how do I know the number of items in the file. during the time of writing, I know how many elements array to write. But assume that I want the file to be read at a later time, then how to find the number of items in the file, so that I can read the exact number and present it. Thank you all

  Hello

  I start with the second question:

  bytes_read = ReadLine (file_handle, line_buffer, maximum_bytes);

  the second argument is the buffer to store the characters read, so it's an array of characters; It must be large enough to hold maximum_bytes the value NULL, if char [maximum_butes + 1]

  So, obviously the number of lines in your text tiles can be determined in a loop:

  Open the file

  lines = 0;

  While (ReadLine () > 0)

  {

  lines ++;

  }

  Close the file

• How to find the value max and min for each column in a table 2d?

  How to find the value max and min for each column in a table 2d?

  For example, in the table max/min for the first three columns would be 45/23, 14/10, 80/67.

  Thank you

  Chuck,

  With color on your bars, you should have enough experience to understand this.

  You're a loop in the table already.  Now you just need a function like table Max and min. loop.  And you may need to transpose the table 2D.

• How to find the 'society of the IP '?

  Hi all.

  I am beginner Eloqua10, and I have a question.

  Could you tell me how to find the 'intellectual property society '?

  ('Intellectual property society' is the name of the company Eloqua derived from the IP address of the visitor).

  I guess that there is a 'society of IP"in a preview, but I couldn't find that.

  Please help me.

  Regards ,

  Matsui

  Hi Matsui,

  The field you are looking for, is a field of account.

  

  When you select fields in reports, then select 'IP address of the company' in the areas of account.

  I guess it could help you.

  Kind regards

  Eloqua Expert