Question involving a misspelled link

Earlier, I was just browsing the internet and typed a rather simple url and she flashed a notification in the sense of 'Your OS X crashed', this confused and worried about the legitimacy of the request and the site as he did not redirect me to apple. I made the right choice? I use it now and nothing seems to be wrong with him, should I do about it? I tried to get on youtube and I think I didn't confuse a 'u' for 'i '. Any advice would be greatly appreciated.

This popup is a scam. Apart from rejecting it, you need not do anything.

(141079)

Tags: Notebooks

Similar Questions

  • How do I get my security question resett show resett link

    I must add coupon itunes $ 10 already, but I can't buy an app in the store when I buy will have the question

    security, but now I'm forget it so I want to restore the security issue and when resett he bones do not show e-mail received resett link pls * me thanks!

    You can try to follow this link: If you have forgotten the answers to your security questions Apple - Apple Support ID.

    If still does not, click on this link: Contact Apple for support and service - Apple Support

    call apple, so they can help you

  • Question of relative/absolute link in F4V file to post on the Web

    Hello, I am new to Flash, but am familiar with HTML, Photoshop and Illustrator.  I work in Flash CS4.  I have successfully run a .wmv file through the Media Encoder, converted into a file f4v, imported into Flash and published with a skin in a folder on my hard drive.

    I'm learning it on my own (no one else in my State Agency knows Flash - we just start posting videos on the Internet, and it is the test case).

    I get the following four files in a folder on my hard drive (I put in brackets what I think the files do, please correct if I am wrong):

    Oil.F4V (movie file)

    Test.html (the html page in which the swf file is embedded to play the movie)

    Test.swf (the SWF that is embedded in the html page)

    SkinUnderPlayStopSeekMuteVol.swf (linked from the Test.swf file skin file?)

    My question is: as a long time that these four files reside in the original case, the html page displays the film perfectly.  As soon as I rename the folder, nothing works.  It seems to be a question of restoring a relative/absolute link among the files?

    I want to put these on my site online to test, but courses that do not work, but either.

    I apologize in advance if an answer is already posted on the forum, I searched but did not find one that addressed this particular issue.

    Thank you all in advance for any help you can offer!

    If everything is in the same folder, just delete the path in the properties panel and use only oil.f4v

  • question of the DB link

    Dear Sir

    We use a database link db to connect remotely to a different database and run the report. For the last two days we are facing performance issues, now my concern is, in fact what server is to have the performance issue? Is the db where db link is created or the remote db on which the query was executed, is the culprit?

    Can someone tell me... What is the reason?

    I'll take a look at plans of execution on two databases - although if the operation is indeed completely remotely while the plan of the source database will contain relevant information.

    You can also check if the query shows the same performance that will deliver you directly on the db of the source - to check if the problem is associated.

  • The question of the anchor link

    Good afternoon everyone,

    In my project, I try to make a link to a location anchored on an external Web page, in this form,

    " http://www.website.com/page#anchor "

    Doesn't seem to work. A quick search returns this "anchor and Shared Destination text hyperlinks are not supported".

    Am I interpreting correctly - I can't link on my folio to an anchor on an external page? Or I do something wrong?

    Thank you

    DW

    Solved. User error.

    As used link works fine. I used a shortened URL that lost the #anchor when it is redirected.

  • Question regarding with DB Link

    How will I know if the db connection that was created is a PUBLIC or private?

    I wanted to know the system tables (views) for the same thing.

    This is the first column of the all_db_links who is the OWNER. Public link db it's PUBLIC.

  • newb question: page size and links

    Hi all

    I have problems with two things (probably a lot more to come).

    (1) in the presentation "Discover the berkeley", he said that I could change the size of the page in my database. Where is this configurable?

    (2) I read in textbooks that to store values in a key-value pair, I can use an entity (I currently use), or I can make it serializable, or create links. My objects are currently composed of 2 integers (ints), a short, a double and a byte [8]. It is not a complex object, so I do not think that I have to use the catalogue of the stored class serializable or custom bindings. Is it not the case?

    The entity option seems easiest. Is - this slower to use or something?

    The serializable option makes it sound like I can only store a single primitive. Is this fair?

    Please let me know - any help would be greatly appreciated.

    Thank you
    Julian

    Julian,

    The page size is a parameter for the C of Berkeley DB version. We are on the forum Java Edition, then maybe you want to be on the forum for product C - Berkeley DB

    Have you had a chance to read through http://www.oracle.com/technology/documentation/berkeley-db/je/GettingStartedGuide/bindAPI.html? Here's a brief overview of links, while a full text that explains how to choose a link is to the http://www.oracle.com/technology/documentation/berkeley-db/je/collections/tutorial/collectionOverview.html#UsingDataBindings.

    But before you dive too deep into the links, consider using the Direct persistence layer API. Which will let you use store and retrieve objects Java directly from Berkeley DB Java Edition and Berkeley DB without management of the bindings explicitly.

    Kind regards

    Linda

  • 3 simple questions involving basic effects.

    I use Pro CS3 on Windows 7.

    (1) is it possible to apply an audio transition to make something fade out?  I see only 'constant gain' and not 'the constant loss' or something else.  I don't know how to lose volume over time.

    (2) I wanted to do a bunch of clips black and white at the same time, so I highlighted all the clips that I wanted to have that effect on and dragged the black and white effect in the menu on the clips, but it did nothing!  I tried several times, even tried the reverse, dragging the clips of the effect, but nothing.  I had to finally click on each item separately and apply the effect, very tedious.  Is it possible to apply it to several at once?

    (3) I can change the volume of a single audio file by clicking middle yellow bar on the fastener of the line of time and travel upwards (or downwards in case I want it reduced to silence) but I can't figure out how to do this in several clips at the same time.  For example, if I want 5 clips to increase by 4.5 dB without clicking each clip individually.  Thanks a lot for your help guys.

    1. Controls by clicking on the audio "elastic" to add a control point.   For example to fade a clip to add a control point 1 second from the end and the other at the end.  Drag a last up to zero.    Or; Add an audio transition of melted at the end or at the beginning of the clip.  (command D shft)
    2. In addition to a clip.  Then copy this clip, select all the other clips, and choose attributes of the dough.
    3. If you want to change all the clips or gain, volume change the volume of the track.

  • Question involving select... more partition...

    Hello

    I use SQL Cookbook by Anthony Molinaro to learn more about SQL Oracle-specific features. Recipe 3.9 on "Joins when Performing using aggregates" States 'find the sum of the salaries of employees in the dept 10 as well as the sum of their bonus' gives the following query as a solution to the problem:
    select distinct deptno, total_sal, total_bonus
  from (
        select e.empno,
               e.ename,
               sum(distinct e.sal) over (partition by e.deptno) as total_sal,
               e.deptno,
               sum(e.sal * case
                             when eb.type = 1 then .1
                             when eb.type = 2 then .2
                             when eb.type = 3 then .3
                             else 0
                           end)    over (partition by e.deptno) as total_bonus
          from emp e, emp_bonus eb
         where e.empno = eb.empno
           and e.deptno = 10
       );
    This code works, but only if there is no two deptno 10 employees who have the same salary. If two different 10 deptno employees the same wages then the 'sum (distinct e.sal)' causes the sum of salaries to fall short. To make sure that this conclusion was correct, I used the following data tables emp and emp_bonus respectively (where emp 7840 was deliberately added to cause and show the problem):
         EMPNO ENAME             SAL     DEPTNO
---------- ---------- ---------- ----------
      7782 CLARK            2450         10
      7839 KING             5000         10
      7934 MILLER           1300         10
      7840 AJONESA          5000         10

     EMPNO RECEIVED        TYPE
---------- --------- ----------
      7934 17-MAR-05          1
      7934 15-FEB-05          2
      7839 15-FEB-05          3
      7782 15-FEB-05          1
      7840 17-MAR-05          1
    using the tables above, the result should I get is
        DEPTNO  TOTAL_SAL TOTAL_BONUS
---------- ---------- -----------
        10      13750        2635
    that the query above does not produce because employees 7839 and 7840 happen to have the same salary (total sal is 8750 instead of 13750, and the returned total bonus is correct).

    The following query gets the right result:
    SQL> select d.deptno,
  2         d.total_sal,
  3         sum(e.sal * case
  4                       when eb.type = 1 then .1
  5                       when eb.type = 2 then .2
  6                       when eb.type = 3 then .3
  7                       else 0
  8                     end) as total_bonus
  9    from emp e,
 10         emp_bonus eb,
 11         (
 12          select deptno, sum(sal) as total_sal
 13            from emp
 14           where deptno = 10
 15           group by deptno
 16         ) d
 17    where e.deptno = d.deptno
 18      and e.empno  = eb.empno
 19    group by d.deptno, d.total_sal;
    I tried to find a query using sum (.) on (partition...) which would give the same result as this one and this is what left me speechless. Is there a way to get the same result as this last request, using 'select... sum (sal...) courses (partition...). similar to the one shown in the first code snippet?

    Thank you for your help,

    John.

    Hi, John,.

    It gives you the results you want:

    select distinct deptno,
     SUM ( CASE
            WHEN  r_num = 1
            THEN  sal
           END
         ) OVER (PARTITION BY deptno) AS total_sal,
     total_bonus
  from (
        select e.empno,
            e.sal,
            ROW_NUMBER () OVER ( PARTITION BY e.empno
                        ORDER BY      NULL
                      )     AS r_num,
               e.deptno,
               sum(e.sal * case
                             when eb.type = 1 then .1
                             when eb.type = 2 then .2
                             when eb.type = 3 then .3
                             else 0
                           end)    over (partition by e.deptno) as total_bonus
          from emp e, emp_bonus eb
         where e.empno = eb.empno
           and e.deptno = 10
       );

    As I said previously, the ROW_NUMBER analytic function assigns the number 1 in exactly one line per person, so only 1 numbered lines are counted in the SUM which produces total_sal. analytical functions cannot be nested (for example, analytical SUM argument can be an expression that uses Analytics ROW_NUMBER), that is why the SUM of total_sal is made in the main query.
    Personally, I wouldn't use the analytical SUM for it. When there is a choice between the aggregate functions and analytical, it is almost always easier and more efficient to use the aggregate functions when you want a line of output for each group (or partition); Use the analytical functions only when you want a line of output for each line of raw data. In general, think very carefully whenever you are tempted to use SELECT DISTINCT ; It is not very often used in well-designed applications.
    Here's how to get the same results using global funds:

    select  deptno,
     SUM ( CASE
            WHEN  r_num = 1
            THEN  sal
           END
         )          AS total_sal,
     SUM (bonus)     AS total_bonus
  from (
        select e.empno,
            e.sal,
            ROW_NUMBER () OVER ( PARTITION BY e.empno
                        ORDER BY      NULL
                      )     AS r_num,
               e.deptno,
               e.sal * case
                             when eb.type = 1 then .1
                             when eb.type = 2 then .2
                             when eb.type = 3 then .3
                             else 0
                       end          as bonus
          from emp e, emp_bonus eb
         where e.empno = eb.empno
           and e.deptno = 10
       )
GROUP BY  deptno;

    No query above depends on whether you're dealing only with a deptno.
    The two queries above calculate tha total_salary after that the inner join is made. If an employee doesn't have at least one line in emp_bonus, that wages will not be included in total_sal.

    In the case where you wonder why you got an error when you tried:

    sum(sal) over (partition by distinct(empno || sal)) as total_sal

    "PARTITION BY * SEPARATE * x ' is not allowed. Partitions are always based on distinct values, so there is no point in adding a DISTINCT keyword.
    In addition, you probably don't want say "PARTITION BY (empno |)» SAL). Consider what would happen if you had these two lines:

    EMPNO   SAL
-----   -----
1234    500
123     4500

    The empno expression | SAL is the same ('1234500') for the two lines, so that they would go in the same partition.
    What made you proabably "PARTITION BY empno, sal.

  • Links work but question blue mark on working capital?

    I'm totally new to dreamweaver CS4. I transferred my iweb in there site.


    In only 1 page (others have no problem) all look totally good text links until I put my cursor on it, then it changes to the blue brand question.

    The links work fine and I can say that all images and rollovers (png/jpg) files appear to be in the correct folders.

    I tried to move the models outside the main directory and it worked at first but then not.

    All mouse code looks like this:

    onmouseover = "IMmouseover ('shapeimage_2', ' 0');

    .. .and one of the web pages has the same code and does not have this problem of question mark!

    Thanks for your help in advance!
    Laja

    I don't know why I don't see in your first post. Who told you to use IMmouseover? It should be onmouseover

  • Firefox has left at the opening of the links. This could result in updates of Microsoft Office 2010 to 29th?

    As in the question

    Are these links in documents Microsoft Office or Outlook messages? I'm not sure of the connection with Microsoft Office.

  • Anyone know how to send a web page or a link to this page now?

    We used to be able to "send a link" under the logo of Firefox. This feature is now gone. The new dropdown under the three parallel lines show an advance or option send.

    There is always the question of the Email link on the file menu.

    • Press the ALT key, or press F10 to display the Menu bar.

    You can find this item in the palette to customize and drag it in the bar '3' menu button on a toolbar or Firefox.

    • Firefox '3-bar' menu button > customize
    • View > toolbars > customize

  • I asked a question yesterday. How can I find

    I asked a question yesterday. How can I find it and the response, if any.

    On the forum index https://support.mozilla.com/questions , there is a link to My Contributions to the first post page 1 above. It should show the posts in order based on the most recent responses or changes to a thread.

  • How to a previous question, I asked to check answers

    At a question about printing edit several days ago. How do the question to check answers? Go back a day is unacceptable.

    Once you are connected to this forum and you look at this page - https://support.mozilla.com/en-US/questions - click on the link my Contributions at the top of this page, to view a list of all your messages in this forum.

  • VPN question

    Hi, I use the windows Server 2003 and. When I access my server at home I connect the VPN but I not have access to the shared private folder when I try to open the system crashes but the other file I can open without blocking. Please help me solve this problem...

    Hi Patchamuthu,

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for support on Windows server. Please post your question in the below link:http://social.technet.microsoft.com/Forums/en/itproxpsp/threads

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for