Question of AHCI

Similar Questions

• Question about the Y510 AHCI drivers for install XP

  NiHao Lenovo Forum,

  I am a proud owner of your IdeaPad Y510. I just wanted to ask what the web page offers Lenovo the AHCI storage driver to activate the storage controller SATA on the motherboard for my laptop Lenovo IdeaPad Y510?

  I ask because Y510 as many users who install the XP will need to have these storage SATA controller drivers if they want to support higher speeds, hot plug and native command queuing (NCQ).

  I see that Lenovo provides the following AHCI drivers for ThinkPad found here:

  www-307.IBM.com/PC/support/site.WSS/MIGR-62909.html

  Also, it would be useful to let everyone know that Lenovo Y510 models come with what advice system that they have, with regard to the necessary SATA AHCI Controller driver for them.

  I see the ThinkPad models use Intel 82801GBM SATA AHCI Controller or Intel 82801HEM/HBM SATA AHCI Controller as indicated above from the URL.

  How can I check my Y510 to know what Intel SATA AHCI Controller is necessary here?

  Some clarification would be useful. Thanks in advance for any help and assistance here.

  Also another method here would not create an installation with the Intel Matrix Storage Manager drivers slipstreamed XP disc? And how does a person know which of the many Intel Matrix Storage Manager drivers should be slipstreamed to the pilot Y510 AHCI SATA Controller here?

  And how many different models of Lenovo Y510 uses different system boards? Think there are at least two, because some have been announced with a FSB 800 MHz right?

  Thanks for any help and support here in advance.

  Read the FAQ some might answer your questions.
  Also, I suggest that different motherboards are in different models, as I said there are even different colors - green and Brown motherboards there. Brown, I saw myself - those who are ASUS, green are unknown for me.
  Then, NCQ is not a feature of driver software. It is a material of HARD drive capacity to optimize movement traectory leaders to speed up the read/write process. So, no driver is required to activate. This work iven in the BACK.
  AHCI driver is inside driver chipset. Also, you can integrate it. Please, read the FAQ .
  HTH

• Question AHCI Lenovo R60

  A user has a virus and deleted system files virus critical of windows, The IT guy working this day there used a Dell disk to do a repair of windows, needless to say he would give us errors. It locks the user offline because it does not work if you enable it and she made mistake and hang upward at a desk empty. Which is what you want using a Dell on an IBM disk.

  So I got a Windows XP SP3 OEM disk and I tried to do a repair using, but it will not find the hard drives because of the hard disks running in AHCI mode. I was going to try to put into service in SATA mode just to make the repair, then from new, but I've heard that this can damage the drive. -That someone has already tried this?

  So I tried using Raid drivers I found on this site, through floppy drive and disk windows still can't find drives
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-64283

  I also tried using the F6 key and a few other generic drivers for the Raid system and they do not work either, can you send me the correct drivers or let me know if change the BIOS from AHCI SATA works just as well, for now I'll try and back up the PC to an image that switch so if I'm not looking for the BIOS I get the saved data.

  You must move the reader to the compatibility rather than mode AHCI mode. ACHI is the SATA mode, while the compatibility mode is the BIOS a compatible player for disc SATA hard of loading and window sees as a PATA drive.

• Question AHCI with Bootcamp Windows 7 on Macbook Pro (please help!)

  Hello, I've been running into issues with my Early 2011 15 "Macbook Pro since I used Bootcamp to install Windows 7 64 bit Home Premium on my new Samsung 840 Evo SSD, I installed in it." What I read, it meets the criteria to run AHCI, but for some reason, I can do activate or install the Intel series 6 Chipset AHCI drivers.

  I was thrown around the web with people saying: they got their SSD to work on the Windows partition, but I can't understand what I'm doing wrong.

  Here is the link that I got more at Apple, which has all of the other information that you might be looking. If this isn't the case, please post and I will reply as soon as possible.

  https://discussions.Apple.com/message/26326822?ac_cid=op123456#26326822

  Help, please! It drives me crazy, and I really need this working classes begin about a month.

  Thank you in advance for your time and effort.

  Hello

  Thanks for the reply.

  As directed by the error that you have given, I suggest you follow the steps below to install the drive in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

  Let us know the status of the issue.

• A few questions on Satellite Pro S300-121

  Hello

  We bought 12 of these laptops last July, I installed Windows XP Pro but have had problems with about 5 of them on and outside since then. The main problem is no output to the screen, power light turns on but no screen output, only medium difficulty is to press and hold the power button, close and turn on and maybe 2nd or third time it works. I have check the VGA settings in the BIOS and it is defined both as when I put it on auto it was even more of an issue.

  I note also with these portable 5 BIOS pose as I set the SATA mode to IDE when installed XP but from time to time, just the BIOS that resets and passes it to AHCI this cause the laptop to blue screen, it is easily fixed, but I wouldn't keep doing this!

  The last time that that's happened, this morning the BIOS clock has been fixed at a date in 2008, I know this indicates a dead battery but I have the same questions about 5 of these laptops possibly a bad batch of batteries of BIOS (I understand these things happen).
  If anyone else has had similar problems with this model and if so could you let me know please.

  Andy

  Are these laptops left alone for a long time? Maybe the CMOS battery is empty, what can happen faster if you leave the laptop into sleep/Hibernation Mode and the main battery is flat.

• Satellite L500D - AHCI driver for Windows XP

  Help, please.

  I need to install Windows XP on a Satellite L500D - 16K on AHCI mode not compattible. I can't find on toshiba or amd AHCI controller needed for this motherboard support notebooks, I can not even find the name of mothers everywhere.

  If I can use it on a stick for installing xp. pls help with a link or a Council

  Hey Buddy,

  I put t know what model of Satellite L500D you have exactly, but I can really recommend to read the discussions in the forum first before you start a new question. This has already been discussed 100 times before

  The AHCI driver, you can find in the package of official website of Toshiba display driver:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Compaq 610: [Compaq 610, P/N: NX550EA #ACB] latest driver for the SATA AHCI for Win 7 PRO SP1 RUS x 64 controller.

  Hello world!

  Could someone, please, tell me, why there is no driver SATA AHCI controller for Compaq 610 for Win 7 PRO SP1 RUS x 64 in the download section of HP support for Compaq 610?

  (01) where can I get the latest version of the SATA AHCI controller driver for Compaq 610 for Win 7 PRO SP1 RUS x 64?

  (02) the original Intel (r) Matrix Storage Manager V8.9.0. 1023 will replace the ' Standart controller SATA AHCI 1.0 (Microsoft) "(v. 21.06.2006 6.1.7601.18231) with the more recent/latest version?

  (03) will be the upgrade of the SATA AHCI driver improve the speed of read/write of my any percentage HARD drives or this idea is nonsense and absolutely useless?

  I'll be very grateful for any useful info! Respectfully, Tianuchka))

  Hello:

  I would use it to HP... the description tells you what it does.

  The HP 6910P has the same controller and chipset as the 610 HP.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3357379 & swItemId = ob_85204_3 & swEnvOid = 4059 #tab1

  Who answers your questions first 2.

  Regarding the 3rd, I don't know whether or not you notice an improvement.

  If you want to update the driver, you can also install the last utility Intel chipset installation from the link below.

  Download, unzip and run the setup.exe file.  Then restart the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format

• Tecra A9 - 11i: update Bios problem and AHCI works not

  Hello

  I have trouble to update BIOS for a Toshiba Tecra laptop A9 - 11i, (with the last update of the official European website of toshiba); After running the bios (version 3.2.8) Launcher
  "I get the message" this computer is not supported "? The latest version of the bios installed is 1.5, date 05/07/2007

  also if I can add a few questions:
  the function keys tdlo can't seem to work;
  led for the "FN" key light turns on when the key so assume the FN key works, but there is no response when you press on the "FN" key and one of the number keys on the f - I installed the software of the control unit as have been advised but this has not resolved.

  I also have difficulty accessing the AHCi ' mode to work in Windows XP Pro SP3. I chipset intel 965 m + ICH8M, the Intel ICH8M serial ata storage controller-2828 present in the Device Manager - the matrix storage manager does not work so I copied the file iastor.sys from the folder Manager matrix in C:/Windows/Driver/system32 and changed the registry as read elsewhere on the forum but have had no joy.

  any advice would be greatly appreciated, thank you very much.

  > I am having trouble updating BIOS for a Toshiba Tecra A9 - portable 11i, (with the last update of the official European website of toshiba); After running the bios (version 3.2.8) Launcher
  "I get the message" this computer is not supported "? The latest version of the bios installed is 1.5, date 05/07/2007

  This error message appears if you want to update a BIOS that is not compatible with your model of laptop.
  Toshiba pilot European page provides the BIOS 2.10Win for this model of laptop.
  If you have used certainly bad BIOS.

  > There is no response when you press on the "FN" key and one of the number keys f
  Controls of common modules the FN keys.
  If the issue should be resolved install common Modules v 6.06.00, 4.30.15 utilities
  Notes; You need to press FN + 1, 2, 3 etc. DON T press FN + F1 etc.

  > I also have difficulty accessing the AHCi ' mode to work in Windows XP Pro SP3. I chipset intel 965 m + ICH8M, the Intel ICH8M serial ata storage controller-2828 present in the Device Manager - the matrix storage manager does not work so I copied the file iastor.sys from the folder Manager matrix in C:/Windows/Driver/system32 and changed the registry as read elsewhere on the forum but have had no joy.

  First be sure that the AHCI is enabled in the BIOS.
  In addition, the Intel Storage Manager controls the AHCI so you should integrate the AHCI driver to CD Win XP as described here:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm
  or here
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• Satellite P300-20R - where can I find drivers for AHCI?

  Hello

  I have a TOSHIBA Satellite P300-20R and I installed a 320 GB 7200 RPM HD.
  I partitioned and formatted and I would like to install Windows XP Pro and I started the installation CD and after the first screen when loading Windows
  all files in memory... critical an error appear. Why?

  Is the SATA AHCI driver?
  Where I canfFind SATA AHCI driver for P300-20R?

  Thank you very much

  Hello!

  Yes, for the Satellite P300, you need the AHCI drivers. This is necessary on each laptop, which is equipped with a SATA HDD, because otherwise the HARD drive will not be recognized OS.

  The drivers, you can find the Toshiba site. It s called Intel Storage Manager.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Now, you have two possibilities to integrate the drivers. You copy the drivers on an external floppy drive and load the drivers after booting from the CD with F6. Or use you nLite to create your own installation with these drivers disc.
  If you have other questions about this, please read the hundreds of threads here in the forum. This procedure returns on every laptop.

  Good bye

• Why the AHCI mode is disabled in some models of Satellite P200/205?

  Hello.

  My laptop model is Toshiba Satellite P205-S6277 (PSPBGU-00W016B). Chipset Intel 945 PM Express, Intel 82801 GBM (ICH7-M).

  According to the information of the intel.com my laptop processor / chipset are fully compatible with the AHCI mode. But my SATA controller works in IDE compatibility mode and there is no way to enable AHCI SATA mode in the BIOS.

  So I have two questions correlated.

  1. why this AHCI mode is completely disabled by the BIOS? Is it possible to activate this mode in future versions of BIOS?

  2 If this mode is completely disabled by the BIOS in the models of laptop of all PSPBG and PSPB0 then why Intel Matrix Storage Manager (driver that improves the functionality of the AHCI mode) is available at downloads driver recommended for these series of laptop on sites European Canadians, Toshiba and even specially for my Toshiba laptop model on the site?

  I already posted the same question to the site we Toshiba but unanswered for a month.
  Maybe there is someone who is able to answer this question?

  >.. There is no way to enable AHCI SATA mode in the BIOS.
  How you tried to activate it exactly?
  I have Satellite P200 and the two modes are available. I have model laptop but can not imagine that the AMERICAN models, or models even Canadian work on a different path and BIOS must be the same.

  Toshiba service best place where you should ask for help. Call them and ask for explanations. If you are right and the AHCI mode is unavailable, they know why.
  Over the past 3 years I have worked with 4 different laptop models and all have absolutely identical SATA settings.

• Satellite L300-1F8 - AHCI and WLAN drivers

  I have L300 1F8 PSLBGE and I have 2 problems with it

  1. I preferd using XP to install it so I put video surveillance ACHI not so I knew forum that I can install hardware Intel software to set the DCIS but after I downloaded the software I can not install it because (no system resources).
  Can you tell me how to install it correctly too, in system properties, I noticed it says that the RAM is 2.87 GB! is it supposed to be 4 GB

  2 - I tried to install wirless LAN but I can't. What software is right for me to do from the downloads page direct me to another page that contains several types of software. Can any body tell me that I have to use?

  Thank you

  Hello!

  1. first of all it of called * AHCI * and not ACHI ;)
  I put t know what you mean with you can t install it but the Intel Storage Manager contains the drivers you need and you have to integrate the drivers during the installation of Windows XP. This means that you must use the external floppy drive or nLite ([www.nliteos.com]). So I think that this Toshiba document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm
  If you have other questions about this, check out hundreds of threads here in the forum!

  On Windows XP it of not possible to use 4 GB of RAM. Why? Check this box:
  http://APS2.toshiba-tro.de/KB0/TSB82022E0000R01.htm

  2. on the Toshiba site, you can search for your model. Then, you will get a list of all the drivers you need for your mobile only:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• This chipset is Satellite L300-110 uses & software question

  I have two main questions:

  1. I just want to know what kind of chips is being used in the Toshiba Satellite L300-110, so I will know if you want to enable AHCI or RAID/AHCI only?

  2. I used to have some software bundle with my MS Vista OS installed ready, but when I installed Win7 MS I couldn't find this software anywhere, the most important for me are:
  Toshiba - Camera Assistant Software
  -Toshiba DVD Player
  -Ulead® DVD MovieFactory® for TOSHIBA
  -Toshiba Face Recognition
  So, I appreciate if someone can tell me where to get these software once again, as I really need?

  P. S.
  I don't need the full software bundle, and I couldn't find value add software to download driver.

  Thanks for the support.

  Hello

  As for the question:

  (1) the laptop supports the Chipset Mobile Intel® GL960 Express. The motherboard supports only SATA HDD controller and RAID is not available!
  In the BIOS, you can change the mode of the SATA AHCI controller or in compatibility mode. Compatibility mode allows you to install an OS windows without installation or driver SATA!

  (2) Ulead® DVD MovieFactory® is a 3rd party. This means that you can not download this software. This software is only part of the image of Toshiba (recovery) which is preinstalled on the Toshiba laptop.
  Other applications (Toshiba DVD Player, webcam, facial recognition software) can be downloaded from the page of European driver of Toshiba.

  Welcome them

• Satellite U400-183 - need Recovery DVD and AHCI drivers

  Hello

  I tried to reinstall Win Vista Home Premium to my Satellite U400-183. I used a DVD OS Win that came with my other laptop to other manufacturing and the key that came with my Toshiba laptop. Everything works beautifully, but in some areas of Windows is still some specific parameters of the manufacturing on the other. Now is it possible to get a DVD of Windows Vista Toshiba?

  Another question is where can I get the AHCI drivers. There is only an exe file on the support site which I can't use during the installation of Windows. There must be some these .sys files, but I can't find them on the Toshiba site, so I had to install Windows in compatibility mode.

  Thanks in advance!

  PS: Sorry for my bad English, I'm from the Germany...

  Hello!

  A new recovery DVDs, you can get your local ASP (authorized service provider).
  Or you order a DVD from Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  The AHCI drivers or let say Intel Storage Manager, you can download from the Toshiba site as you have already said.
  The .exe file, you must check out to use during the installation, but with the recovery disk you n t need them.
  Please read the readme file in the Storage Manager, there is an example how to extract it. Use the command line what it
  For example: - a - a - PC:------.

  Good bye

• 2nd question of installation SSD

  MSI MS-7525 mother HP Compaq Persario SR5410F-Boston map

  I checked my BIOS settings to see if I have the opportunity to change SATA to AHCI settings for installing a SSD.

  Under Settings Advanced SATA ony a 1 option, turn on or off there is no option for: SATA in the BIOS settings that allow him to be on the RAID, AHCI or IDE.

  Flashing the BIOS is updated to version 5.22 (only update available), I now have this option for one SSD instalation?

  Hello @Larry1946,

  I understand you are trying to install an SSD in your HP Compaq Persario SR5410F. Unfortunately, the HP Compaq Persario SR5410F don't have AHCI capabilities. You can still install the SSD on your system, only it runs in "IDE Émulation" mode, a kind of compatibility mode that replicates the functionality of the old interface ATA "Integrated Drive Electronics". While your SSD will not display its potential performance or be able to take advantage of all the latest features SATA, it will still be able to run on your system.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• 15 - p112ne: HP 15-p112ne: port msata and the AHCI mode

  Hello.

  I think to upgrade my laptop HP 15 - p112ne. I want to buy SSDS. So my first question is, if this model has msata port available on the motherboard. And the second question is, why I did not in the BIOS SATA mode selection? Because then I would switch to AHCI mode.

  Thank you.

  Here is the Service Manual:

  Manual

  There is no port mSATA on this model. Page 94 shows how to get into the hard drive Bay to replace the hard drive with an SSD.

  This video will be helpful, too:

  http://h10032.www1.HP.com/CTG/manual/c04427554

  The BIOS is constantly on ahci. You don't need to play with it. If you need more help with this return ticket.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.