Question of cost

Similar Questions

• Question of cost of project - measure displayed even if none selected

  I have a pretty specific question related to the subject area "project - cost" in OLIVIER.
  
  To aid the output of the installation of the box, any customizations... when I go into the answers-> cost of the project (field) and select the following fields:
  Fiscal period
  Project number
  
  Physics generated sql includes a measure:
  sum (case 'Local currency' when 'Local currency', then T166575.) LOC_BURDENED_COST when "Project Currency" then T166575. PROJ_BURDENED_COST when 'Global Currency 1' then T166575. GLOBAL1_EXCHANGE_RATE * T166575. DOC_BURDENED_COST when 'Global Currency 2' then T166575. GLOBAL2_EXCHANGE_RATE * T166575. DOC_BURDENED_COST when 'Global Currency 3' then T166575. GLOBAL3_EXCHANGE_RATE * T166575. DOC_BURDENED_COST another NULL end)
  
  I think that it is the measure of 'Cost', but my question is... Why does it force the display of this measure and make a sum/group when I have only two dimension attributes selected. I expect to reach via the fact table, but only make a select distinct, not throw in an aggregate.
  
  As I said, quite specific but curious to know if anyone knows what is the engine of the integration of the measure when none is selected.
  
  Thank you
  
  k

  A widening of a domain is based on a column, rather than an entire table. This column makes implicit therefore in all queries are.
  In your example, you have the column implied "Basic." "" "Blow - project cost. Cost"(including the case statements and aggregation by summation).

• The question of costs of re - install Windows XP Pro.

  I need to wipe my hard drive and reinstall Windows XP Pro. My OS drive is SP1. I really don't want to go through the installation of SP1, and then install all the updates and Service Packs (a lot of time and reboots). Is it possible to download Win XP Pro with SP3 and use my product key code to eliminate install all updates? If so where can I download XP Pro with SP3?

  Thank you, Don

  You create an integrated installation drive containg the latest sp.

  One of the many sites; http://www.MaximumPC.com/article/how-to--slipstream-your-XP-installation

  PS It not there no legal download / legitimate WinXP, otherwise if you have a subscription to tecknet

• Satellite L500-1XD does not illuminate

  I have used my laptop for 2 weeks and now when I try to turn it on there is no sign of life other than the power to the front lights when plugged. It is not only a problem of screen - there is no humming noise or anything when I try to turn it on, I just get nothing.

  So far I have tried:

  Power off
  Modification of the power supply and the battery of the same computer of my father.
  Remove all RAM, two sticks one at a time, repeat the cycle of power and trying to turn it on.
  Disconnect the DVD player and lighting.

  None of them worked.

  Someone at - it ideas?

  Hello

  > Removing each of RAM, two sticks one at a time, repeat the cycle of power and trying to turn it on.

  What you might try to power the device using the RAM modules that are used in identical s Dad for laptop.
  In case this is not enough, I guess that some sort of dysfunction of the motherboard could be the reason why the laptop cannot be turned on.

  How to solve this problem?
  I guess you don't have a lot of options; the defective part must be replaced. But I think it's a question of costs

• Broad-band spectral scanning ni5660 the disk?

  Hello

  I would use the ni5660 to save the (100 MHz) spectrum broadband on the disk.  I understand the limitations of bandwidth in time real (limitation of SDC to 1.25 MHz, 20 MHz bandwidth total possible if dumped first in the amount of memory on-board), but I do not know the limitations of scanning speed (how long can reset the niTuner to a new Central frequency and is there a risk to damage the tuner by sweeping too fast over a long period of time?).  My interest is the 2, 4-2, 5 GHz (ISM band of about).  I would like to imitate the 5660 demo Panel scanning feature, with a backup to disk option and, perhaps, I have Q data instead of amplitude only.  I'll save is worth a day of HD of the PC data.

  I'm looking for suggestions and code of y to achieve the highest resolution for adjustment of scan rates given.

  Thank you!

  Chris

  Yardov wrote:

  Hi Chris,

  The 5660 OR not is the best equipment to perform this operation. Mainly because the limitation you mention (1.25 MHz DDC). This means that you can enjoy at the maximum rate (64. MECH / s) and then the software will run the SDC operation that could take a long time. Now, there is no need to worry in tunning faster that the material can, the driver will not let you damage the unit and you will be able to get the data you need into pieces. You will then need to concatenate these data.

  The pilot DAMA performs this operation automatically but not the NI 5660 driver. Save all the data for a day would take the enormous amount of time and processing power. I recommend watching some of the latest devices with more bandwidth SDC as the NI PXI-5661 and NI PXI 5663 with respectively 20 MHz and 50 MHz of bandwidth SDC.

  If you have any other questions or thoughts about this.

  Yardov,

  Yes, it's a question of costs.  I have placed a proposal for the 5663, but will not have funding until the summer (or not at all ) and the 5661 would require the purchase of a new chassis SMU anyway.  Thanks for the info on the speed setting!

  Chris

• Why my Acrobat 7.0 doesn't work anymore?

  Acrobat 7.0 has worked well until I got a new computer.  7.0 is not compatible with Windows 7?

  Aa7 is not compatible with Win7. If you have a Win7 32 bit, you can do workarounds to make it work. However, it is not transparent. The major problem is that you need to change the printer to the Adobe PDF printer port to FILE. Then the file must be opened in Distiller to obtain the PDF file. It is extra work, but can be a step, that you need if there is a question of cost. You can try it out by installing Acrobat 7 (if it will install) and then printing to the Adobe PDF printer with print to a selected file.

  On a 64 bit system, you're probably totally out of luck. The only way to know is to try it.

  My comments above are based on the AA5 on Win7 Starter installation as an experiment.

• Should I buy a digital printer?

  We look at printing long-term workbooks and other materials, but we will be starting by the cycles of production of as little as 100-200. Our first publication is 42 pages in color, 8-1/2 x 11, probably on the stock of gloss of 80 to 100 pounds. We think that our cheapest option is to saddle stictching 11 x 17.

  It is essentially a question of cost/benefit. Y at - it a little expensive digital printer, new or used, which can be purchased that will compete with a local digital printing charge $3.50 or so each for a race of 200 and get a comparable quality? I understand that we had to make our own folding, Stapling and cutting.

  Bottom line: we need get a produced quickly beautiful and not expensive.

  THX.

  Paul

  P.S. I'm having a hard time finding local printers who charge low fees for a little run.

  You don't want an inside bleed on a saddle-stitched book, in general. In all cases, if there is internal bleeding, purging is at the edge of the page opposite along the spine or you need to divide the "spreads" If you aren't picking up on the opposite page and expand your art to the edge of the spine on the spreads of Courland.

  You are from a width of page that is closer to your target page, then reduce to about 94% of its original width, unless you stretch the page to fill the dimension 8.5 ". Because the A4 page is narrower, the area of origin of bleeding it along the spinal column is now inside the finishing area.

  Try this:

  Export the A4 document in PDF format, but in the marks and bleeds section turn off brands and value top, bottom and outside saigne.125 thumb. Your PDF file should now be 1/8 and 1/4 inch larger than a standard A4 page, and purge on the outer edges of three.

  Implement the new file as in the face of the letter pages with purge de.125 on top, bottom and inside out and 0.

  Run the script with these settings:

  

  This should stretch the width of the bleed page but not to leave any extra to the spinal column.

• I got confused as to what the program

  Hi I want to create an image of the invitation in Photoshop, then create an editable pdf for my client can change the text, I am confused as to exactly what program I needed (I don't want to spend loads of money just so the most fundamental need for programs to create editable PDF files!) Thanks in advance.

  I assume that you already have PhotoShop. To treat the type of PDF you suggest, the road is Acrobat. However, the idea of edit in Acrobat can have some explaining. Which might include the use of the text (new name in AAX) editing tool, the typewriter tool and form fields. However, I'm not sure these provided "editing" you would expect. To this point, you can download the trial version of Acrobat and try that. I'm not so sure that Acrobat answers the question of costs that you suggested, but it's the Adobe tool to use for editing PDF files.

• Why so many posts?

  Hello
  I was wondering the reason of estates EVM no traffic.
  
  I also think that I won't get an answer to this post...
  
  Cost Manager is a very good app, then, probably, there is something wrong with this forum.
  
  But: what?
  
  
  Concerning
  Fabio Alfonso

  3 possibilities (in order of probability)

  1 cost Manager is not widely used (I have not met a single company I work with/for the ten years that use it)
  2. only people with a reasonable amount of experience using Cost Manager, so not too many questions
  3 cost Manager is so easy to install and run that people don't need to ask questions

• Blue channel usually worse, due to the chip. But why?

  Hi, I have another fundamental question, thanks for reading.

  Using Photoshop for many years, I learned that it's usually the blue channel that shows the most noise in an RGB image. I think the best way is usually green, followed by red. Similarly, the human eye is better suited for a green world (plants) with the addition of red (fruit) at a relatively late stage in evolution. Blue isn't that therfore important, it isn't so bad when the blue layer is worse than the other two. Correct so far?

  Now the question is, why not make the chip just as good for all channels? Is it cheaper to do some bad, blue, that the three parties just as good? I guess that's the sensors causing the difference it quality. It's a question of costs, all channels would be equal in quality theoretically?

  Thanks for your advice!

  Just raise the sensors (leaving aside the lossy compression and JPEG):

  They make the chip out of everything as good.  But there are a lot of factors in competition.

  Silicon sensor is more sensitive in areas less sensitive to blue and green and red.  It is even more sensitive to infrared and needs a filter to reduce infrared to keep the image to the correct search (otherwise fire fate of magenta :-).

  And the model of typical Bayer sensor has 2 green sensors for each red and blue: RGBG

  This puts red and blue in a disadvantageous position, but the Red is more sensitive.

  Fortunately, your eye is also less sensitive to blue, so the Silicon sensor ends work similar to the way that your eye doesn't.

  You need exposure time, or a very different sensor for quality equal across all channels.

  And, with the exception of scientific imaging, there is not much need.

• How can I create something like this... See the link

  Please see an example of a typical newsletter at this link: http://kW.com/OutFront/index.php?issue=may-Jun

  I really want to learn to do it (do the pages turn, have a menu visible in the background, etc...).  And, if possible, I would also like to be able to insert links in the document that take the reader to another location in the document (for example, links on a Table of contents page that brings the reader to a place in the document).

  Where should I start?  I have Adobe 8 Standard.  Can I first create the entire document in PDF format and then transfer on in InDesign to finish once I have the content?  (I just started learning InDesign, if I'm not even too quickly on this issue.)

  I could really use help and advice on that!   I'd even pay a tax of tutoring if someone would be willing to lead me through the steps I need to do!

  If you can help, I would really appreciate it.   Thank you!

  lablovr (at) gmail.com

  Your options are

  (1) you can use a service provider which converts your PDFS into flippage magazine as in your example, most of them are commercial. Usually, you pay some question of costs/published or that there may be some monthly payments so... They place your magazine in their own special server and give you a link to your Web site.

  (2) you can create your flippage magazine out of InDesign CS4 as mentioned Scot. If you do it directly from InDesign, it s very easy to produce, but there is no element of navigation such as zoom, go to the next/previous page etc.. You can do some of these elements of InDesign layout the buttons and links hypertext, but that s of your time.

  You can also view an add-on for InDesign called eDocWorkflow. It automatically brings a user interface to your SWF files after exported them from InDesign CS4: http://www.prepress.fi/eDocBrowser

  West trial to test...

• Report Studio

  I work with the external reports, and we are trying to minimize the smartview Excel formula and reviews reports of working space to produce the basic financial statements. Foot is a problem, that we are currently facing in FR. The only way we know is to "insert the formula" walk total, but we can only build a 'hard-coded' reports instead of use the relative Member, for example: "children of POV.
  
  Is any way to create a dynamic report and prepares to foot or crossfoot total? What are the best practices to serve as external report during the SEC filing?
  
  XBRL - tag in the metadata, in addition, how XBRL tag in the metadata works with foot / rounding problem?
  
  Published by: user9102824 on 15 Sep, 2010 08:17

  There is no easy way out, it can become a question of costs and benefits, you can try conditional formatting, but it won't always walk. Most productive and recommended way by many is to indicate in a footnote that "rounded numbers may correspond to the", it is a common practice.

• URL parameters

  Hello
  
  I'm new to Flex and as now is more a question of cost, we are trying to get a look better and more deeply to this technology built our next projects/web applications.
  
  As I tried to convert part of our work in ColdFusion, I couldn't find anything wrong and YET can deal with URL parameters. In coldfusion, for example, we can deal with URL. [VariableName]. In our case, we had already used this method to deal with the language (for example, English, French and Spanish). How to collect and deal with information like this in Flex?
  
  In a Word, if I call http://mywebsite/home.mxml?language=english. How do I use the interactivity with the variable 'language' in the URL to see what language has been chosen by the user?
  
  Thank you

  Okay, this is actually done in 2.0, but that's.

  First in 1.5, you could do what you show because the mxml file was a servr, as well as sews Server take your settings and use them when it generated the html wrapper to create and transmit 'flashvars' in the SWF file. 1.5 the values would be in public variables with the same name as the parameter/flashvar.

  In 2.0, the same thing can be done, but since you do not have a Flex Server (unless you use SDSS), you must call an asp or jsp or some other html dynamic generation platform, which can take parameters and create the object/embed tag with the flashvars. Access you the values in flex using a special object (parameters? arguments?) I don't exactly remember.)

  Tracy

• Questions about the cost and the best specifications for a new Windows 7 computer

  Hello

  I got most of the things that I should include in the purchase of a new computer.

  Things proposed are the following: Please read and tell me if I need it, and the approximate cost.

  8 GB

  12 GB

  A TB

  VIDEO CARD BUSINESS... I'm QUITE CONFUSED as to IF I NEED. SEE MY QUESTION AT THE END.

  Video card: min. 99 (No. built in chip card (or is it... discreate) dunno... two options different which one.)

  Video card: should be mid to high range; at least at first.  They are beginning to take a long power supply

  supply; and can charge the supply too, so invest in a good to start with.

  Question: Can I add a video card later?  Right now I only use the documents and regular pictures.  Later I want to do

  videos of my pictures; not much more.

  LCD or LED display must be top natch; for Photo Editing/cropping or manipulation?  I do not understand what they

  Let's talk about it.     They speak the monitor?   I DO A LOT OF PHOTO EDITING

  PHOTOSHOP.

  Thank you, Zara3511

  A discreet (dedicated) video card is not necessary. You can always add more later if you need the extra graphics power. Its not harmful if you perform a task such as photos and videos. Benefits is its great for games top of range and can future proof your system. If you are working in Photoshop, certainly invest in the discrete video card. Photoshop she likes it.

• We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Hi all

  We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Let's say I have a cost with 5 code cost journal

  Code 1 price

  2 cost code

  Code 3 cost

  Code 4 cost

  Code 5 cost

  BP budget approval, after that I click on New, can I add a button to the tab the line items so that when I click on this button, it reads all codes of cost in the cost journal and auto fill on the grid?

  You can create a new 'model' BP for this purpose. Line item type. Then add a line manually with a cost on each code. Then you can use the copy in your BP BA record consolidate the function to copy the line items to the new folder of BP (including all cost codes) into your folder of BA. That is to set up a model record once with all cost codes and then copy consolidate billing it to all lines new record of BA. would this work?