Blue channel usually worse, due to the chip. But why?

Similar Questions

• My screen to develop area is completely blue. I do not see the photo but the screen displays in the browser

  The library, card, book, etc... works but the development zone is totally in a solid blue color. I can't change my photos.

  Hi edwint,

  Please follow the steps below.

  > Launch Lightroom

  > Click Edit > Preferences (Windows)

  Lightroom > Preferences (Mac)

  > Click on the performance tab

  > Uncheck display CPU usage

  > Click OK

  > Quit Lightroom

  > Restart Lightroom and look for the question.

  Let me know if it helps.

  ~ UL

• Bookmarks toolbar icon minimize after 1600px resolution due to the address bar, why?

  That's how my favorites looks like Ctrl + Shift + B
  http://prohardver.Hu/DL/UPC/2013-07/122010_4304.PNG

  This is what it looks like to 1650 + widescreen.
  http://i.imgur.com/DGrwLEC.PNG

  This is what happens when the size of the screen reaches 1600px ~.
  http://i.imgur.com/hziXVBF.PNG

  It is a problem with my laptop with large screen of 1366px. And it was good until last year when I've upgraded to a new Firefox every night a few months ago, and this problem occurred.

  And the cause of this problem is the address bar, if I removed it the icon has not disappeared (minimize)
  Tried to change the width of the address bar, but nothing helped. What can I do else? Only this folder of bookmarks disappear, all other icons of stays...

  Reset firefox it's a hilarious response. Please stop suggesting such a thing, when it's not neccessery. Since I have not had a response, deleted a few files and the localstore.rdf came out to be the problem, deleted icons and rearranged, again, now it works very well.

  Your solution is dumb as hell, why the hell I start all process (with 30 extensions etc.) during the Setup and can be ended with the same bug?

  I can't give a lot less for your 'solution' but you should go to the corner and think about what you wrote!

  If I wanted to hear a stupid thing like that I would call a stupid to get answers support center "have you tried to turn it off and on again?" ...

  I'm really upset and angry about this, it was the first and the last, I tried to get responses here, I thought it's a smart/good support site, I was wrong.

• PC may have the connection, but why MAC cannot have Anyconnect VPN?

  Hi, we have MAC and PC users. Two users could reach inside the network through ASA and Anyconnect VPN. However, MAC users can not have connection (please see screenshot in attachment). The output of the show run webvpn command is below:

  Act(config-WebVPN) # sh run webvpn
  WebVPN
  allow outside
  allow inside
  CSD image disk0:/csd_3.5.841-k9.pkg
  AnyConnect image disk0:/anyconnect-win-3.1.04066-k9.pkg 1
  AnyConnect enable
  tunnel-group-list activate
  Auto-signon allow ip 0.0.0.0 0.0.0.0 auth-type all the

  The lack of configuration ""anyconnect image disk0: /anyconnect -macosx- i386 - 2.5.2014 - k9.pkg "all the time." We don't think that this is the reason why MAC users are unable to reach the inside of the network because we do not have this command for a long time. Any suggestions can give? Thank you.

  > The question is that the command for MAC was not there for long. Why is it could work when the order wasn't there?

  I don't know, but I remember that in versions, it was not necessary to have * all * images in flash. Perhaps this changed some time. , You upgrade your ASA recently before the problems began?

• FULL TABLE SCAN even with the index, but why?

  Could someone please explain why I'd get FULL TABLE SCAN explain plan results when joining 2 tables on columns that already have clues about them? For example,.
  consider this fictional scenario:
  
  employee table with columns:
  employee # (primary key column)
  name
  
  address table with columns:
  employee # (foreign key to employee.employee #)
  subscription_type
  address
  
  Select Employee.Name since it is, address.address_type, address.address
  where employee.employee # = address.employee #.
  
  This query shows a full table scan in terms of the explain command.

  Full scan of the table is not necessarily slow and index access is not necessarily fast.

  You will recover, no doubt, most if not all the ranks on both sides. The fastest way to retrieve each row in a table is to do a table scan. Using an index, and a single block of reading for each row in a table is much less effective than to do a table scan.

  Justin

• 1120: undefined of the property, but why?

  Could someone please tell me why I can't affect x and is coordinated to the button?

  <? XML version = "1.0" encoding = "utf-8"? >
  "" < mx:Application xmlns:fx = "http://ns.adobe.com/mxml/2009"
  xmlns:s = "library://ns.adobe.com/flex/spark".
  xmlns:MX = "library://ns.adobe.com/flex/halo" minWidth = "1024" minHeight = "768" width = "768" >
  

  < fx:Script >
  <! [CDATA]

  btnStoryListen.x = 10;
  btnStoryListen.y = 10;
  
  []] >
  < / fx:Script >
  
  < mx:TabNavigator width = "600" height = "400" id = "tabNav" >
  
  < s:NavigatorContent label = "Start Page" width = "100%" height = "100%" id = "tbMain" >
  < / s:NavigatorContent >
  < s:NavigatorContent label = 'Story' width = "100%" height = "100%" color = "#FFFFFF" fontFamily = "Alba Super" id = "tbStory" >
  < mx:Button id = "btnStoryListen" styleName = "StoryListen" enabled = "true" / >
  < / s:NavigatorContent >
  
  < / mx:TabNavigator >
  
  < fx:Declarations >
  <! - Place non-visual elements (e.g., services, items of value) here - >
  < / fx:Declarations >
  
  < / mx:Application >

  The code in the block is executed before the button is created. Around her, the best way is to encapsulate this code in a function and then call in the handler initialize or creationComplete for the button (or application). Something like this:

  Peter

• IE 6.0 creates the space, but why

  Hello
  
  I'm having trouble determining what the problem on some of my pages.
  Some pages show extra spaces that in ie 6.0
  
  Read something on the float and margin and add a line, but I don't think that's it.
  Could someone take a look and help me to fix this, even in ie 6.0.
  examples of site URL:
  
  good page: www.lapuravida.eu/index.html
  incorrect page: www.lapuravida.eu/lpv_groep_kunststof.html
  
  Thanx

  Hello

  is there anyone who could take a look a the pages mentioned above, I'm not sure what the problem is.

  Pascal

• has received a notice to upgrade USB key - how? In addition, advice the installation due to the error #5 help is understand__

  has received a notice to upgrade USB key how?    also notice that on the upgrade installation is not complete due to the error #5 why?

  Please need help do not understand

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Uninstall Flash by using the uninstall program Flash Adobe link above.

  Flash is sometimes corrupted.

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  Reinstall Flash, after 1st unchecking / uncheck the toolbar Google download option there.

  See you soon.

  Mick Murphy - Microsoft partner

• Menu "BOLD" of blackBerry Smartphones changes back to default after changing the battery, but changes back when original battery in

  I wanted some advice about batteries for my Blackberry "BOLD". I bought what was believed be an OEM battery so I had a back up when the original battery ran low on the ground outside, etc. But when I turned off the phone and remove the original OEM battery and place my purchase new battery in the phone, the menu has changed the appearance of the default menu and with no icons email I normally 5. The phone works fine, but the email icons disappeared now. If I replace the 2nd battery with the original OEM battery, he then returned to my menu customized with all the messaging icons in the menu.  Can someone please help with this problem. Is this happening because the 2nd battery purchased well stated as an OEM does not have the secure chip and alleged encryption that is used by the "BOLD" BB Phone to ensure that you are using an authentic product OEM Blackberry? Should I just buy the battery via Blackberry at full price or can I get the other distributors who claim to sell the correct OEM battery with the chip but at 1/2 to 2/3 of the price.  Or all the compatible batteries should operate independently without changing my settings and I may encounter an error with my phone, or is there an option that can be turned off in the phone to stop the resets.

  Thank you

  Hello

  I can't guarantee that the use of the OEM battery will fix the problem.

  I have no experience with Mugen batteries, so I can't help with that.

  I don't think that a battery of expensive means better. Specifications only.

  I buy my OEM batteries with the carrier that sold me the unit.

  It might cost a little more, but peace of mind and no warranty problem

  are worth it.

  I think there is a very good reason that RIM makes batteries,.

  and I am not prepared to find out why!

  JMHO,

  Bifocals

• Video in the Gallery exposuer, why is this eaven a problem?

  It must be the most of the askes questions?

  I ve tried and tried, but can't do the things, the model, the love, but why and why can´t I get video in the Gallery?

  Exhibition Gallery is a slide show allowing to insert the item other than the image, you can use the composition for this.

  Add the composition for the page and insert the video into containers that would make the same effect.

  Thank you

  Sanjit

• All previews (library, film, etc.) show that the blue channel.

  Hello

  Although all previews are showing what seems to be the blue channel (or all colors like blue) the develop module correctly displays images.

  This has affected not only photos newly imported, but the entire catalog.

  I tried:

  restarting LR

  reboot PC

  deactivation of the GPU acceleration.

  Update to the latest version of LR.

  Someone at - it ideas?

  Thank you

  Search the database of previews (catalogname Previews.lrdata) and rename it by adding "old" before the name.

  Do it with closed Lightroom and restart Lightroom.

• CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both d

  CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both dng and arw.  Ideas.

  Try the following:

  In the Camera Raw window, press Ctrl + K (Cmd + K on a Mac) to bring up the preferences.

  Uncheck the box processor graphics use.

  If that suits him, update your graphics driver may allow you to work with the checked graphics processor.

• Can't reinstall the display device after you have uninstalled due to the blue screen.

  As I said, my display has led me to get stop the blue screen I believe because I tried to update the driver for my laptop screen it is so using secondary TV monitor via VGA black.  I thought that the driver update would fix it but I got the dreaded blue screen.  Now im thinking im going to uninstall to reinstall the driver but no luck.  I should have listened to the little voice in my head, trying to tell me NOT to try it on my own, but I thought ID try   UH a little help... Please?  Thanks in advance.

  Bobby U.

  Hello

  Make and model of the computer?

  Go to the manufacturer's website and install the latest chipset drivers, and then try again to install the device driver.

  Doc from Sony on the installation card driver

  http://www.Sony-Asia.com/support/FAQ/270823

  Is there a display error code in Device Manager?

  What is the error you receive?

  It locate dump files in c:\windows\minidump

  Download the file to your account of OneDrive (formerly SkyDrive) and post a link back.

• Blue screen not resolved by restoring the factory settings

  Hello

  I have recently been experiencing problems with my iPhone 5. Blue screens were held and has increased the frequency of these blue screens - it has reached the point where you cannot use the phone at all.

  I am inclined to believe that it is a hardware failure, as I restored the phone to factory several times, without success. During most of these attempts to fix the phone, blue screens took place during the restore process, leave the phone in recovery mode.

  Another reason why I am inclined to believe that it is a hardware failure is due to the fact that sometimes vertical bars appear on the screen of the device, almost as if they are a watermark. To determine whether or not this hardware related problem, I took a screenshot on the phone when he turned on after a blue screen and sent this picture of my brother phone. Vertical lines were not present on the image that he has received, which leads me to believe that there is a hardware failure.

  Unfortunately the phone is no longer in warranty, because it is about 2 years old. I was wondering if someone had possible solutions to this, as I tried most of the fixes suggested on various sites without success possible and also if anyone has this kind of problem.

  Alex.

  A DFU restore usually recover the phone:

  • Install the latest version of iTunes on your computer, if it is already there ((you must have Windows 7 or later or OS X 10.8.5 version or later version)
  • Restart your computer
  • Disable any antivirus and firewall
  • Launch iTunes
  • Connect the cable of the device to a USB port on the computer (not a USB hub), but DO NOT CONNECT to the DEVICE AGAIN
  • Press in and hold the HOME and SLEEP at the same time for 10 seconds exactly, buttons until the screen goes black, then release the SLEEP button but continue holding the HOME button. If the Apple logo appears then that now the two buttons, you who was held for too long; start over.
  • While holding down the button HOME connect the other end of the cable to the device
  • You should see a message in iTunes saying there were a phone in recovery mode (it can take up to a minute for the message appears). When you see this message release the HOME button and the device must be restored. When asked DO NOT restore a backup. set up as a new phone.

  Try several times, if this does not work the first time; It is difficult to do in DFU mode.

• Channels disappear in WMC at the output via HDMI

  I have a tuner TV USB (connected to an internal antenna) on my Windows 7 laptop. When I use just the laptop, I can watch TV without any problems. However, when I connect the laptop to a monitor via a HDMI cable, all channels disappear and running a scan does not find an any of them. Help the PC on the screen works fine - just Windows Media Center is not.

  The laptop is a Dell Inspiron M301Z and the TV tuner is a DVB-T205 August (v2.0).
  Someone at - it just an idea as to what might happen?
  Thank you

  This may or may not be related but I was also faced with HDMI and TV on Media Center and Media Player playback.   You say that using the HDMI interface as a PC monitor works fine, just that WMC or MP do not play TV Live (I guess that's what you mean by "channel disappears").   I encountered the problem that I can not play back recorded OTA TV via the HDMI port, but it works fine on the computer screen, just as you describe.  I have not tried to directly play live TV like this so I do not know if this also fails.  However, I discovered that WMC and MP read properly on the TV connected via the analog VGA port on the laptop.  You can try to hook up a monitor via VGA and then try to watch television on the subject.  In my case, the HDMI connected TV present a good computer bureau and icons, etc, but when I tried to play recorded TV, Media Player won and gave me a message about missing files.  I find that VLC Player works with HDMI, but it does not play HD as well as WMC material due to its fine use of the acceleration of graphics chip.

  If your tuner key comes with the TV/DVR software (most of them do), you can also try to run that and see if it works on the HDMI monitor.  I posted a query on this forum about the problem I found in mid-October ("Mirrored display causes error CODEC... "), but no useful response so far.