question of delay ESXTOP

Similar Questions

• Question of delay at the start of vista on Satellite series

  Hello!

  I would like to ask - is this normal for a laptop to start Grand vista after a short break? I mean when I write my password on the beginning of the start it, it looks like a hard drive takes a few seconds to "break" and after she, all programs begin to run. In addition it my Toshiba works perfectly.

  Best regards

  I need about 1 minute. The timing is for Vista. Isn t it?

• Outputs produced by the analog input job Retrig delay counter

  Hi all!

  First of all, I want to thank everyone on this forum who take the time to answer the questions, this forum has been invaluable to me.  I have a question about delays in adjustment to the pulse output of a counter, like what is described here.  My question is related to another, asked hereon the trigger of an analog signal and producing a pulse for each triggered event.  I have this job and can be seen in the attached vi.  Basically, now I'm able to produce a TTL pulse whenever my analog signal passes a predetermined threshold.  I have also documented the vi to my best understanding, if I have something wrong in the documentation, please let me know.

  In any case, now that I have a pulse at each outbreak, I would like to be able to adjust the delay of events so that the pulse is not produced until the period n/20 (n = 0, 1, 2,... (19) what I expect to see is a similar pulse train in 'fig. 2' in the article, where the white pulse is the counter pulse, and the pulse red would be the same as my analog signal.  So, for example, if I had a 281Hz signal, I want to produce a single pulse with a width defined by the user whenever my signal crosses a threshold (it's zero delay: 0/20); This part may be made using the vi attached to this subject.  Now I want to delay this impulse as to each trigger event, a pulse is not produced until 1/20 of the period, or 0,000178 seconds after the trigger.

  Looking at my vi, I think that if I change the output channel of the meter to 'CO Pulse Time' and then set the respective initial delay, time and little time, I can get delayed impulses mentioned in the article.  Correct me if I'm wrong, but I think that basically 'big time' controls the pulse width. 'initial period' is what controls how long to wait after the first trigger event is reached, before generating a pulse, but this applies only to the first impulse and not the rest; and finally 'small time' is the time to wait before the next pulse is created.

  Earlier today, when I use the CO Pulse Time option, it seemed to work properly for me to a certain degree.  At low frequencies the impulses seem to trigger to each event when the pulse width is set at 2.5% of the period.  When I tested at 281 Hz with a pulse width, 'big time' of 0,000089 sec and without anything wired for the 'initial delay' or 'small time', the impulses seem to ignore systematically each triggers 2... that tells me that something is wrong in my settings, rather than problems with the sample clock.  So I decided to connect '0' to 'small time', but then I got an error message indicating that some time may be less than a value (I forgot what the error message).  So I concluded that I must not understand what these terms mean.

  Sorry for the long explanation, but I really need help with this.  So let's say that the first set of data, I want to acquire is at zero delay, such as pulses are generated at each triggering event like how I have my VI now; so, for the next set of data I want pulses to generate 0,000178 seconds after the trigger threshold; so, for the data set third, I want to pulses to generate 0,000356 seconds after the trigger threshold; and so on... How should I do for this?  Thank you very much!

  Hello!

  Please post on the Forums OR! I think the main issue here is that you are sampling not fast enough to catch all of your high. So you set your high dry 0,000089. You will need to substantially increase the frequency of sampling in order to catch all these. Something around 25 k should do the trick.

  To the extent where using the time counter Pulse, you're totally on track. I think that the use that the delay will do the job.

  I hope this helps! Let me know!

• Ask about the delay block drain plug

  Hello

  I have a question regarding delay clean in Oracle block.

  I read below the meta link Note: 40689.1

  Consider a transaction that updates a million row table. This obviously visits a large number of database blocks to make the change to the data. When the user commits the transaction Oracle does NOT go back and revisit these blocks to make the change permanent. It is left for the next transaction that visits any block affected by the update to 'tidy up' the block (hence the term 'delayed block clean out').

  But the location of the table transaction rollback segment can be recycled once it is marked as a clerk.

  If any new transaction tries to visit a block affected by the last update, and numbers on this block is changed and goes to the corresponding rollback segment transaction location of the table, but this location for the transaction rollback segment is recycled as a result of the validation.

  So, how Oracle will take care of this situation?

  Thanks in advance.

  It will do still a drain plug delay block with a "best estimate YVERT" as it can extract is no longer the SCN of the transaction to cancel it.

  See http://www.jlcomp.demon.co.uk/cleanout.html

  Hemant K Collette

• Laptop HP Pavillion: Support Assistant

  Hello

  I hope one of you can please watch as HP desk help was not able to help! They offered remote access to my computer which scared me to death!

  In the previous version, I was able to request that the temporary internet files, Recycle Bin, backups, etc. have been completed the 1st day of each month. I don't remember how I did well-, but do not know it was an easy thing to change.

  I only am not able to see these settings in the new version - The HP Support Assistant has been improved to-8.1.40.3.  Do you know where I can find it and change it later please.

  Thank you

  Hi @happygirl22,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook and questions with delayed automatic options.  It is now listed in the section updated and of the updates. Here is a great video that shows you the new Hp Support Assistant changes. He has characteristics that you might be interested to activate for the timed automatic.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Performance Windows 7 problem

  There are two days that my computer has turned black. She is back but worked a few minutes and then became slow or stopped completely. Often, said pages do not respond. Can start working very well for about fifteen minutes, but back problems. Dell worked on this remote and it did not help. I was going to try to do a system restore to the day before the problem said but it says: System Restore has been locked by the administrator and I need to contact the administrator. I am the only user and administrator. I would have not locked the system restore. Anyone has any ideas that might help?

  I do not recommend using all cleaner programs like that, they cause many more questions and delays them distressed.

  PS. You can configure your browser for all sessions to treat confidentially, without initiating inPrivate mode.  Go to the options of IE and set it as you like (such as "remove history when I go out", which means that it will always act as InPrivate.  But remember that your history of ways your previously typed addresses will show never again of compensation.

• VCA - VTC confused period?

  Hi friends,

  I worked on Vpshere ESXi 5.5 U2 for 9-10 months so decided to go to this level starter VCAD510 review: VCA - DCV (without coupon) cost me about $ 95.

  I asked him properly in internet, there should be 50 multiple choice questions and delay of 75 minutes .

  But on the peasonvue portal, show length examination 120 min.

  Why is it so? why more than 45 minutes?

  I get more questions then?

  Help out me

  I did all the basic components of vsphere:-5.5 ESxi, Vcenter Server, Vmotion, motion of storage, vconvertor, HA, DRS, FT, storage DRS VSANS, VLANS, DPM, EGGS/OVF, groups snapshots/cloning/templates, Port, security policies, traffic shaping, consolidation of network cards, VCB, DPM, virtual appliances, Vswtiches, Distributed switches, VUM, VMware tools, Orchestrator, Site Recovery Manager, Configuration Manager, Vcenter Vcops VCB , Horizon view intro, Director intro vcloud.

  Should what products/features I study? suggest me.

  Screenshot of personvue of Portal exam details, is attached.

  Thanks in advance.

  The regular commitment lasts 90 minutes in total - 75 to answer questions and 15 minutes to complete agreements and demographic issues.

  You've got another 30 minutes to answer the questions, you are in the exam in a country where English is not the first language - you can see that at the bottom left of the screenshot you posted.

  So you will have 105 minutes to answer the questions, as well as 15 minutes to complete agreements and demographic issues.

• School database structure

  Hello world
  I created a database in Oracle 10g for a school where we manage all ranks, but when the ends of the year school I have to create a new school year, creating new classes and adding new students and as I do it is by importing all data to a .txt file that is provided to our Director.
  What I would like to know where should I put the old categories of the school year that just passed, and if the best way to do is to create another table to put the old data uses the school year to identify each year where we need to print a report?
  Can someone please help me create this table structure?

  >

  Please note that I made a few suggestions - I don't know
  enough about your case to give definitive answers.

  This is the definition of my table where I store all my students grades:
  SCHOOL_ID VARCHAR2 (5) not null,
  CLASS_ID VARCHAR2 (10) not null,
  STUDENT_ID VARCHAR2 (10) not null,
  TEACHER_ID VARCHAR2 (10) not null,
  GRADE_Q1 VARCHAR2 (3),
  GRADE_Q2 VARCHAR2 (3),
  GRADE_Q3 VARCHAR2 (3),
  GRADE_Q4 VARCHAR2 (3),
  GRADE_T1 VARCHAR2 (3),
  GRADE_T2 VARCHAR2 (3),
  GRADE_T3 VARCHAR2 (3),

  Why do you rank for the quarters and * terms?

  Table Student_Grade
  (
  Grade_ID - sequence
  Student_ID VARCHAR2 (10),
  CLASS_ID
  Grade_type VARCHAR2 (2) - FK separate table values (T1-4, T1-3, S1-2).
  Quality - A - F, 0-100%, 0-5 - separate table FK - values of any system you use in your country.
  Date_Awarded DATE
  Grade_ID PK,
  Studet_ID, Class_ID, UNIQUE NOT NULL Grade_Type
  )

  REMEDIATED_GRADE VARCHAR2 (3),
  FINAL_GRADE VARCHAR2 (3),
  GRADE_LETTER VARCHAR2 (2),

  What is c? Match the rank above? Why is - this VARCHAR (2) - a 'letter' is a character
  by definition.

  SEMESTER_1 VARCHAR2 (3),
  SEMESTER_2 VARCHAR2 (3),

  Now, why did you semesters, quarters + conditions.

  ABSENCES_Q1 NUMBER (3).
  ABSENCES_Q2 NUMBER (3).
  ABSENCES_Q3 NUMBER (3).
  ABSENCES_Q4 NUMBER (3).

  But no absences for T1 - T4 or S1 - S2? Have a table of absences - use
  dates of arrival and the day too - this way, you can be able to identify, for models
  example of

  TOTAL_ABS_Q NUMBER (3).

  Do not Total Absences per year? The sum of Q1 - Q4? Use a
  calculated for this field.

  TARDIES_Q1 NUMBER (3).
  TARDIES_Q2 NUMBER (3).
  TARDIES_Q3 NUMBER (3).
  TARDIES_Q4 NUMBER (3).
  TOTAL_TARD_Q NUMBER (3).

  Same question for 'Delays' - an expired is an end? With permission or without? Also record
  date, day and time - can help with students 'problem' - if they have problems or
  What makes them. An amount on the whole quarter won't give you much info.

  SEMESTER_EX1 VARCHAR2 (5).
  SEMESTER_EX2 VARCHAR2 (5).

  Now, we jumped from quarters to semesters. And what is "EX1-2"?

  SEMESTER_REC1 VARCHAR2 (5).
  SEMESTER_REC2 VARCHAR2 (5).

  Ditto - REC1-2?

  PERIOD VARCHAR2 (9)
  primary key constraint pk_notas_iss (CLASS_ID, STUDENT_ID, SCHOOL_ID, TEACHER_ID)

  Have a single as KP Student_ID - unless you have the same student
  in different institutions - or a single Class_ID - I guess you do not have
  have the same course in different places - unless you teach databases 101
  in two different places?

  Divide this table. A field called "Academic_year_starting", NUMBER 4.0,
  or Course_starting DATE.

  Some ideas - I just threw their so I may have made some mistakes.
  Correct at will.

  Paul...

• Blocks access to a pdf file

  Hi all

  I tried to find an answer on this and other forums as well as using google, but I seem to be unable to find an answer.

  So, basically, I'm actually implement some scripts in my pdf files to track the number of views of my pdf as been opened and then submit that information to a remote server.

  To do that first of all, I must ensure that JS is enabled in the pdf reader that is used. So my question is, is it possible to block access to a PDF if JS is not enabled?

  see you soon and my apologies if it is a question of delay.

  kUr4m4

  Not really. If you want to follow access Adobe sells tools that will be in charge, but they are not cheap.

• Question about kernel sync delay fuzzing

  If I test 3 drivers with kernel sync delay fuzzing activated as well as simulation of randomized and systematic tests of low resources.

  Do Windows not boot at all.

  What's supposed to happen?

  Hello

  Your message is addressed in the discussions on these Microsoft Community forums. It is better suited for the MSDN Developer audience. Go to the links below and ask your question in the appropriate forum.

  MSDN forums: Index

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Concerning

• BlackBerry Smartphones Lag/delay question! Video inside! -8120

  BlackBerry 8120 (os v4.3.0.115)

  T mobile

  Question trolling... Majority of deleted preloaded programs.

  64 MB (100% free) mmc)

  5 core (removed bbm) running programs

  Don't lag in any other program or anything like that, just get out of the State of the "lock". A few seconds of lag when it locked, unlocked. It's pretty boring and you want this problem solved. I just got the phone earlier today and want if it has set up for my taste.

  -pull the battery, all of the pocket with option built-in, deleted all the photos and Articles of mm, freed from the memory card, have the minimum amount of running programs. don't know what else to do. did my research... nothing helps. Edit: also have 20 MB free on the phone. -.

  Video of my delay in bb.

  http://www.youtube.com/watch?v=x4OQqI0m4TU&eurl=http://www.youtube.com/my_videos_edit2&feature=player_embedded

  I would recommend that you upgrade the operating system.

  Follow the instructions on the link here:

  http://www.BlackBerryForums.com/General-8100-Series-discussion-Pearl/165543-latest-OS-8120-4-5-0-152...

  Good luck.

• Delay feedback for multiple choice - 9 Captivate quiz questions

  Hello

  Captivate 9, is there a way to delay your comments on responses to answer until the quiz is completed which is at the stage of the examination?

  Captivate 9 by default is to show comments for each question immediately after the student has answered the question. It is not appropriate for my needs.

  Thanks and regards,

  Grant Bailey

  If I understand what you wanted? Have you used one of the scenarios to have feedback not appearing does not immediately? My only explained methods how to 'hide' the immediate feedback.

  This 'new' question: Yes, can be done, but you will need to use shared (or advanced) actions to raise the event to enter for each slide of the questionnaire.  It will be a lot of work, you will need to store the answer to each question slide (at least for the wrong answers) in a user variable. This answer will be in the cpQuizInfoAnswerChoice quiz system but variable is a variable system reused. You must prepare your various comments text containers (for every possible situation) which are hidden initially, but indicated on the questionnaire slide when in playback mode. This can be done with a conditional action checking the cpInReviewMode system variable (Boolean, has a value of 1 when it is in playback mode).

• using hotspot as a provider of Internet services to delay questions express airport

  I have an Airport Express 2nd generation. I've set up as a home network with no ISP due the fact that I can't get an ISP where I live. I use it for connectivity to all my other apple and mac products, over some generic devices. I go through the implementation of change the settings to ignore the Internet LAN Ethernet, allowing me to have my network. So this is where it gets me confused after a few hours or a device is disconnected. So to continue. Then I take my Netgear wntce2001 streaming single channel device/path/device that I bought. now only available as a wntce2003 dealer local. I go into my menu of the hotspot browser, (Netgear 779 s aircard) and access my WPS in place. The Netgear wntce2001 at this stage only powered with one reset fees, like its new. Push button WPS on my Netgear select wntce2001 WP / parring on my browser and let them connect. At this point the Airport express will amber. Using AirPort Utility I get the double NAT message with options to switch to bridge mode. It all works very well. Now I can use all my Apple products to get on the line and play my generation 4 Apple tv, etc etc. Here's the problem when I remove my Hotspot or it turns off. I'm locked out/unable to join my ISP network wireless access point, that I created.  my book pro Mac will recognize is no longer the Hotspot may not use a web browser to access my hotspot and any other personal devices or belonging to my friends can see or access the HotSpot. Until I drive a half-mile away with her. Or perform a Factory reset fresh out of the box on my Airport express. Even if I remove the hotspot (short drive) then back it's always invisible until I get back from the Airport express. Once I reset the AirPort Express and reset all my other devices. I can rebuild the network and use it as I'm writing this Question (letter). Is anyone know why and how I can solve this problem. In short having a provider. Hotspot demographically impossible only internet access...  Thanks to an old man persisted.

  If I were in your situation... the first thing I would do, is check the wireless internet provider, which is an ISP btw... If they can sell you or recommend a router Ethernet instead of a hotspot. An access point has loads of limits and is not very well at all apple hardware.

  I confess that reading your description of how make you it work, it does not look good.

  I suspect that one of the main issues is the limited number of intellectual property which generally offer wireless ISPS... 5 is the common number.

  You are really not on the express of all... the devices are connect to the hotspot... and when something happens, you have exhausted all of the IP addresses.

  In any case we can begin to do some tests to prove it.

  Please post screenshots of the current configuration of the express with all this work to your satisfaction,

  I need the page summary of airport utility. That is to say it.

  

  Click on the button to edit, and then give me the Internet tab, tab wireless and Network tab screenshots.

• Question on HP 2311xi - auto wakeup source and delay of sleep

  I recently bought this monitor and noticed that when he wakes up from his sleep, it will take about 5 to 10 seconds for him to wake up so that other monitors I've owned that they went immediately.  I was just wondering if this is how this monitor is or if I have a problem with it.

  Secondly, how is the source of the PABX suppose to work?  I have my PC DVI value and I have the default source is set on my 360 via the HDMI connection.  I guess that turns over the 360 it go to the default source and switch to the hdmi connection.  However, my monitor does nothing.  What source is the switch really do or is just defective mine?

  Thanks in advance for any help on this monitor.

  Auto source only works if there is no signal because it detects the port with a signal and auto racing to this port.  However, the monitor has no way of knowing exactly what port the user wants when both signals are present.

  Default port is what will look like the first monitor when running and is not necessarily give port override capabilities.

  Take 5-10 seconds can be normal.  My party at home monitor usually takes about 5 seconds before displaying a signal, but this may be more to do with the HDMI connection (I have not tested with the VGA port).  I don't think that it is a matter of concern.

  Let me know if I answered your questions.

• Good question about windows 8 dell inspiron 3521 with graphics card intel delay right click.

  Greetings,

  I have an operating system running windows 8 pro on dell inspiron 3521. When I bought the camera, the problem was not visible up to 1 year, and then I installed "Tuneup utilities" for a scan and then uninstalled. Since then, I found annoying problem on my pc.
  

  Relatek HD audio was working fine but then it started showing good results, but the sound from the speaker is not and or if plugged headphones as well. PC not dettect not any problem on the sound while troubleshooting. The sign of the speaker on the status bar when clicked and increases the volume of it increases the volume, but the sound and color do not here as well.
  It does a strange thing when I trouble shoot using the sound properties and click 'TEST' test is fine, but I can't hear any sound good! and again when I click TEST on speaker, it says "this device is used by another application. Please close... "
  However, the sound works fine without any problems for a while when I trouble shoot with 'Find and fix with device' or I restart the pc. But after a while this problem automatically. with this desktop right click question also annoyed me for the compliment can be! :( Help

  TuneUp utilities and similar programs usually don't serve to ruin a Windows Installer do it do more damage than good. Stories like yours are not uncommon with these programs. Back up all your data on an external hard drive. If you did a restore USB with your system can boot from to restore factory settings. If you have not done one, try using backup and restore Dell to make one. TuneUp utilities may have ruined the Dell backup feature and the recovery and partition recovery so I advise to call Dell technical support and request a DVD of resettlement or recovery USB just in case. I prefer the DVD because it can be copied to a USB key and has no preloaded software, allowing a cleaner installation. You can then try to restore the factory settings and if something goes wrong with the restoration use Dell support to clean install.