Question on HP 2311xi - auto wakeup source and delay of sleep

Similar Questions

• Auto b & w of the mapping of column source and Targte

  Hello
  
  Can you auto column mapping between the source and the target based on the names of column or column in ODI 11 g physical position while developing an Interface?
  
  Best regards
  
  Muhammad

  Hi Muhammad,
  A lot of learning at the moment! :-)
  Auto-Colonne mapping is by name, you can right click on the target data store and select 'Repeat Auto mapping' If you denied it earlier.
  If you have disabled, you can re-enable ODI->-> automatic mapping of user settings.

  Rgrds
  Alastair

• Schema (source and target)

  Hello
  
  I have a basic question. now I'm in the schema of the Designer tab, and I don't have an idea where I need to drag the source and target
  
  Thanks for the support
  
  Sam

  Hi Sam,

  I guess that you had created the following before you start your 'diagram' of Interface

  1. a project
  2 models (according to your requirement)

  Now, after you had provided information to the "definition" of the interface. In your diagram, you can goto "models" and then drag and drop the required for the models that you created in step 2 above. At the time where you drag and source and target, you can also auto card

  Hope this helps

  Sandeep Reddy, Enti
  HCC
  http://hyperionconsultancy.com/

• The installation program does not ProPlus.WW\ProPlsWW.cab. Browse to a valid installation source and then click OK.

  I am trying to install the 2007 Office Suite on a computer windows vista laptop.  In the middle of the installation the following code appears:

  The installation program does not ProPlus.WW\ProPlsWW.cab. Browse to a valid installation source and then click OK.

  What should I do to complete the installation.

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• Fields "Synonym of entity source" and "Target entity synonym" for?

  Hello

  He is a newbie question.

  Is someone can you please tell me what that fields "Entity synonym Source" and "Synonym of target entity" in the dialog box properties of relationship are for? They are drop down boxes and look as if you should be able to select from the list of synonyms put in place for the entity in the properties of the entity dialog box.

  Thanks in advance.

  John

  Using SQL Developer Data Model Version 4.1.1.888 on Windows 7 Home premium 64-bit.

  Hi John,.

  If you right-click on an entity on the diagram object, then select Create Synonym in the drop down below, another entity object will be added to the diagram of the same entity.

  The fields "Synonym of entity Source" and 'Target entity synonym' in the relationship properties dialog box allow you to specify which of these multiple representations is connected to the relationship on the diagram.

  David

• Procedure of ODI with slow performance (SOURCE and TARGET are different Oracle databases)

  Hi experts,

  I have an ODI procedure but its market with slow performance (SOURCE and TARGET are different Oracle databases), you can see below.

  My question is:

  It is possible write Oracle BULK COLLECT at the 'command on the target' (below)? or

  There is a KM of ODI that perform this task below in a quick way? If so, what KM can you guys suggest me?

  I found 'Oracle Append (DBLINK) control' but I try to avoid creating the dblink database.

  ===============================================================================

  * COMMAND ON the SOURCE (* technology: ORACLE * logic diagram: ORACLE_DB_SOURCE):

  SELECT NUM_AGENCIA, NUM_CPF_CNPJ, NOM_PESSOA

  < % = OdiRef.getSchemaName ("D") % >. < % = odiRef.getOption ("P_TABELA") % >

  ===============================================================================

  *ON the COMMAND TARGET (* technology: ORACLE * logic diagram: ORACLE_DB_TARGET):

  BEGIN

  INSERT INTO DISTSOB_OWNER. DISTSOB_PESSOA (NOM_PESSOA, NUM_CPF_CNPJ, FLG_ATIVO)

  VALUES ('#NOM_PESSOA', '#NUM_CPF_CNPJ', THE FROM ');

  EXCEPTION WHEN DUP_VAL_ON_INDEX THEN

  NULL;

  END;

  ===============================================================================

  
  

  Thank you guys!
  

  Please use SQL for SQL command Append KM... You can delete the unnecessary steps in the KM.E.g. fi you won't create I$ table, control flow etc, then you can remove related steps.

  Please try with that.

• Why do Shotmatch clips source and destination, both change?

  When I click on a source and destination Shotmatch clip affects both. I want to clip 2 match clip 1, clip 1 is not changing.

  Appreciate any ideas

  Neil

  I thought about it. It's my first time using SG and get used to the shape and what works when you link first. I am restoring an old film silent and discovered that I separate the shots, so it was darkening the two shots because they are in the same area of the clip. After using scene detection, it works.

  However my other question is obtaining detect GD using an edl instead of the scene. My movie is 23.98 but SG think that the edl is 24. I rechecked my sequence and parameters of the SOUL to be sure but still the same issue.

  Bret

• FDM to connect to a relational source and target

  I'm new to this tool. I have a few basic questions. I based my research, but could not find a clear answer.

  Can I connect to a relational table as source and target for an application of FDM. Relational source isn't eBS or other applications, just a relational table. I would like to load the same data from a relational table to another table using FDM. I'm looking at the wrong tool? Should which adapter I use? ERPI source adapter is? Which adapter target?

  Can someone please you suggest? Thanks in advance.

  Hello

  If you're new to this tool, you should know that FDM won't 11.1.2.4.

  It is replaced by FDMEE which is already available in 11.1.2.3.

  In all cases, you can extract data from relational db by using a script of integration. FDM doesn't load data to a target database not Hyperion EPM but you he could get it works using the custom script.

  Concerning

• New user problem: Source and program monitors not identical

  Hello

  After several years of inactivity edition I want to make a new start – now with a new version of Adobe. Seems I have to do a large part of the new curve... ;-)

  Implementation of a simple test/learning project, I immediately met a strange problem:

  My Source monitor and program monitor have another 'form': the Source monitor is a block (4:3?), the program monitor is a big screen.

  I'm not aware of having modified or arranged these parameters, and I can't do them even.

  How to do this?

  The questions and related issues:

  • I looked up the initial project settings that allow me the selection of options PAL (and not NTSC), but also big screen by default (and not a different screen format). I can't find. How to do this?
  • Commenting on these parameters of the project, I'm not sure 100% what to choose if I still have the choice: I think that older movies (to change) have my trip so the most recent or 4:3 screen 16:9 wide. And after a crash of my Canon camcorder is on the way which also records (I think) on the big screen. So: Select a specific screen/project format? And WHAT should I choose?
  • The different shape of the Source and the program monitor seems to affect the use of the Titler window: also has a form 'bulk '. Thus the titles in the Titler different completely in the program monitor, especially in what concerns eligible margins. This also gives the creation of models of Titler very confusing and difficult.

  Thanks for the help!

  WimYogya

  Hi Wim,

  The Source monitor and program have qualities of different reading. For example.

  Source monitor will play the original clip. So, if you have a 4:3 video, it will play as it is.

  The program monitor will play within the parameters of the sequence you have chosen. Thus, in the case of sequence > sequence he settled on square pixel 1.0 and the clip is 4:3 it will play in a square pixel.

  Visit this link for more information: Web video wrong size / enlarged

  Vinay

• Source and output windows display the content horizontally cut - that makes it much too

  Hi everyone - I use both the CC2014 and the old versions CC of the Media Encoder to convert WMVs for use in Captivate 5.5. The software has been installed on a new machine, so initially when I did drag an item in the queue (in two versions), Windows Source and output would show only black and would make black only.

  Later, I discovered that Quicktime must be installed I did (for Windows 7).

  Now the two encoders show the cut content to half way down in the Source and the release of windows. content reproduced and when it is encoded (as a flv in CC for example), it displays remove off as well.

  The basic video settings are set to Match Source is not a question of culture. I have two monitors and have seen oddities when questions arise on different monitors - the graphics card is a NVidia Quadro K2100M.

  Any Format choose to exit, the result is the same. The software knows the correct proportions of the source video, only half superior is cut off - that is black.

  Is this something experienced by someone else?

  Thank you

  Frank

  Yes confirmed the answer given by marisela2013 in the link more than half of the video is missing (black screen) - Help! regarding the removal of said KB Microsoft update fixes the problem.

  It solves the problem under a new laptop of Dell Win 7 with CC2014 and CC installed with this update removed.

  Thank you

  Frank

• Auto no estimates and histograms or small is % no default histograms?

  In the past, I used custom written statistics scripts which, by default, collect statistics on large tables with a small percentage estimate and for all COLUMNS of SIZE 1.  They allow the percentage of estimate to be more on individual tables and allow me to choose the individual columns to have histograms with the maximum number of buckets.  The nice thing about this approach is that the statistics ran very efficiently by default and they could dial upward as needed to grant individual queries.

  But with 11g, you can set preferences to the level of the table so that the work of automatic statistics or even a manual execution of gather_table_stats will use your settings.  In addition, there are some algorithm of special sampling associated with auto_sample_size that miss you out on if you manually set the percentage of the estimate.  So I could change my approach to query tuning and the collection of statistics to use AUTO_SAMPLE_SIZE and for all COLUMNS size AUTO by default and then replace these if necessary to grant a request or if necessary for statistics to be executed in a reasonable time.

  I work in a large enough company with a team of about 10 DBA and a group of developers and over 100 Oracle databases, so we can not really carefully keep track of each system.  Having default values be less intensive resources saves me grief to have stats jobs to run too long, but it requires intervention when a request needs to be tuned.  Also, with my custom scripts I get a lot of hassle for people willing to know why I do not use the default settings of Oracle is negative.  But I saw the default settings, even on the 11.2, running too long on large tables.  Generally, our systems are starting small and then data grows and grows until things start to break auto stats can seem you well at all at first, but eventually they starts to run too long.  Also, when the jobs of his stats run forever or automatic tasks do not end in the window, I get complaints about the stats taking too long or not up-to-date.  Therefore, any sense has its advantages and disadvantages that I can tell.

  So, my question, fueled by a day of work post Sierra Nevada Pale Ale, is if anyone else has this same dillema and how you solved.  I appreciate any input on this subject.

  -Bobby

  Hi Bobby,.

  > Also, when statistical work run forever or automatic tasks do not end in the window I get complaints about the stats taking too long or not up-to-date

  Complaints about statistics "not up-to-date" are very common, but they do not need to be "up-to-date"... they just need to be... represents a very significant difference

  > I think that this amounts to estimate the percentage and histograms.  If you can't get the percentage and histograms want to finish, you need to dial them back but then stats are not as good.

  Know how histograms are brought together under the hood for each column. There are a few nice improvements with AUTO_SAMPLE_SIZE (Blog: How AUTO_SAMPLE...). However if you want to learn more about the improvements of NDV or summaries - please consult the book of Amit Poddar pass a separate sampling.

  Personally, I usually start by "FOR ALL COLUMNS SIZE 1" and AUTO_SAMPLE_SIZE (from scratch) and only edit table preferences that must be changed (such as histograms due to the inclination of data, etc..). Other basic stuff works pretty well in most of the cases and so I usually don't need to put a lot of effort into it (you need not to fix something that isn't broken). He published also with aggressive sampling and CBO behavior changes (like fix_control 5483301: power off), but this must be matched to the case by case of course.

  Concerning

  Stefan

• Composite video is not showing is not on the Source and program monitors

  Update Premiere Pro CC 2014 to v8.1 on my Mac Pro running OS X 10.9.5

  When the conversion and loading of a project that worked very well in the last version of first Pro CC 2014, the source and program monitors refuse to display video.  Why? It's terribly frustrating!

  Information on Mac:

  Mac Pro - 2 x 2.4 Quad-Core

  24 GB RAM

  2 x ATI Radeon HD 5770

  Mark thank you for answering my question.

  I ended up having to create a new project, select the the CPU processing, the old CPU project and Recheck in my preferences to import.  Unfortunately this update cost me 2 hours of time to fix as well for me and my client. Not impressed.

• SPM Auto Load Capture and use.

  Hello
  
  I was reading about Oracle PMS feature, but I have questions in mind for auto...
  
  * If we have two capture and use true parameter. Oracle will automatically capture Plans, but it will evolve automatically new plans accepted or he wait to change it manually before using the new plan.
  
  * If it evolve automatically, when and how?
  
  * If it will change automatically, flag of the old regime not accepted? or add a package more accepted
  
  
  concerning
  Hitesh

  If oracle will find always plan2 is better, it will change all base1 flag?

  I don't think so. There is no need to change any attribute of the plan 1.

  Even if a plan becomes unreproducible attribute is not necessarily defined immediately after the last optimization.
  Precise behavior is not documented and, according to my investigations limited, can vary from a version to.
  I guess that these attributes are cached in the pool shared with the thrown and the cursor information in periodically / when appropriate.
  Necessary additional investigations.

  Or simply serve the same on the LAST_EXECUTED function?

  I'm not looked at the purge mechanism. By default do not run to 53 weeks plans are eligible for purge.
  I don't know yet which runs the purge - is made in a maintenance or window based on cursor by cursor when the cursor is analyzed and the basic mechanism used?
  Further investigation required.

  The details you have provided are very accurate, is there any reference book or a link I can read to learn?

  I recommend:
  [url http://tahiti.oracle.com] Documentation, the [url http://www.antognini.ch/blog/] Christian Antognini and his book ALBUMS [url http://www.antognini.ch/top/], [http://kerryosborne.oracle-guy.com/category/oracle/plan-stability/ url] group Kerry Osborne and the [url https://blogs.oracle.com/optimizer/tags/sql_plan_management] Optimizer.

  I've also done [url http://orastory.wordpress.com/category/sql-baselines/] some investigations and messages.

  More than anything I would recommend playing with the functionality, study and observe.
  See DBMS_SPM, look at the dba_sql_plan_baselines and the views underlying - sys.sqlobj$, sqlobj$ data, sqlobj$ auxdata.
  Traces of SQL Plan Management may also be useful:

  alter session set events 'trace[rdbms.sql_plan_management.*]';
  

• question about the quality of the data and CKM

  If I understand correctly, CKM only supports the audit based on the constraints of the db. If I want to have more complicated built with the audit of the business logic, is the quality of the data as a good choice. Or any other suggestions?
  
  In my case, I'll have to check the data in the source table, based on the data in the table from different sources (the source and target tables). This should be doable thanks to the quality of the data, correct? I am new to ODI. When I first installed the ODI, I chose not to install the module of data quality. I guess I can install DQ separately and bind it to ODI? They share the same master repository?
  
  Sorry for the naïve questions, your help is greatly appreciated.
  
  -Wei

  Hi Wei,

  Not necessarily.

  You can create you own constraint that will only exist in ODI and can be complex.

  Right-click on "Constraints" in any data store, and you can navigate between them...

  This help you?

• I buy I phone 5 s of unknown source and I need for my apple ID to open

  I buy a new iphone from an unknown source and I need to unlock

  Sorry, but if you mean that it is locked to another Apple ID, then you're going to need help from the former owner or that the device doesn't help. If you do not find the former owner then your only option would be to try to get a refund there where you bought it. See find my iPhone Activation Lock - Apple Support