Question of discovery for the DFM "stuck in Questioned state devices" device

Similar Questions

• There is no driver selected for the item or a set of device information

  There is no driver selected for the item or a set of device information

  Error message when I try to update the mouse driver or video driver. Windows 7

  Hello

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you can not update the driver. Please let me know if this isn't the problem that you are experiencing.

  I understand the inconvenience caused to you. I will help you solve the problem.

  Before troubleshooting, I have little information about the issue.

  1. When exactly do you get this error?
  2. Did you of recent changes to the computer before this problem?

  Try installing the driver in compatibility mode. Here are the steps how to install drivers in compatibility mode.

  (a) place the driver on the OfficeSetup file.

  (b) make a right click the driver installation file and select Properties or compatibility tab select the appropriate options in entries to the displayed image.

  (c) click apply, and then click OK.

  (d) right click on the file and select run as administrator to install.

  I also recommend that you contact the manufacturer of the hardware device, and you learn about the support of future drivers for Windows 7.

  If the problem persists, post your reply with results and questions above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• The poor Internet behavior Device Manager error "' there is no selected for the item or a set of device driver information."

  Original title: poor Internet behavior.

  I bought a laptop Lenovo X100e used with Windows 7 Professional. It was a great computer, but when I go on the internet, it behaves as if the connection is slow or wobbly, even if the connection is fast. This is especially true of the streaming video, who stutters so much, it is virtually impossible to watch Netflix or YouTube or any other video streaming service. It is also a great computer so I really want to solve this problem, rather than buying another computer.

  I used this laptop on my network domestic WiFi so much and a direct connection with the same behavior. I diagnosed my network speed and its good, usually around 20Mps, again I tried this laptop in public places like Whole Foods, and it has the same: wobbly connection. I have an old Dell Latitude that works and it works great on the same network internet and I used my phone on my wifi at home and it works fine, so it's clearly the Lenovo.

  The network cards are 11 b/g/n Wireless LAN Mini-PCI Express Adapter II and Realtek GBE Family Controller christophepaille. I checked the drivers for the two (using Device Manager), and they are both currently. I used the function "diagnose problems" and found nothing. I googled for problems with them and have not found much.

  There is also a Qualcom Gobi 2000 listed (it's a WAN wireless driver for Windows 7) under other devices and he says "there is no driver selected for the item or a set of device information. I tried updating the driver, but got an error message saying "Cannot find Windows driver." software for your device I have no idea if this is relevant.

  In addition, the laptop plays the video without any problem if it is a file on the local drive, such as mp4, so I don't think that the video problem is in itself. It is the general communication with a network. Again, I don't think it's a problem of wifi because I get the same behavior, even if I plug a cable network directly to my router.

  Also, I tried several browsers updated, including Chrome, Firefox and IE. In addition, I ran several antivirus scans, and nothing is found.

  Any help would be greatly appreciated.

  (1) run chkdsk as follows:

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volume to check the next time that the system/PC reboots,
  Enter: y

  Now, restart the PC.

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php
  Note: Unfortunately now includes a lot of bloat-ware, be very careful when installing remove bloat-ware.

  =====================================================================

  2) run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  =================================================================

  If SFC Scannow could not repair any or all the corrupt system files
  follow these steps:

  (a) open a command prompt (start / all programs / accessories)
  Right click on the command line option, then select: run as administrator

  (b) at the command prompt, enter: DISM.exe/online/Cleanup-Image /ScanHealth

  Press the ENTER"" key.

  (c) then enter: DISM.exe/online/Cleanup-Image /RestoreHealth

  Press the ENTER"" key.

  (d) now rerun the command SFC/SCANNOW...

  At the command prompt, enter: SFC/scannow

  J W Stuart: http://www.pagestart.com

• EliteBook 8440p: lack of drivers for the Ricoh Bay8Controller and Base system device

  Hello

  In the Device Manager my EliteBook, under the heading other devices, I have the 2 below devices for which no driver is installed. What are and how to upgrade drivers (Windows cannot find drivers)?

  - Device base system with hardware ID:

  PCI VEN_1180 & DEV_0843 & SUBSYS_172A103C & REV_14

  PCI VEN_1180 & DEV_0843 & SUBSYS_172A103C

  PCI VEN_1180 & DEV_0843 & CC_088000

  PCI VEN_1180 & DEV_0843 & CC_0880

  - RICOH Bay8Controller with hardware ID:

  PCMCIA\RICOH-Bay8Controller-F1B2

  PCMCIA\RICOH-Bay8Controller-0000-0000

  PCMCIA\RICOH-0000-0000

  Thank you for the support!

  Hello

  Try this link

  FTP://FTP.HP.com/pub/SoftPaq/sp46501-47000/sp46972 .exe

• G6-1c58dx lost the drivers for the controller, ethernet, network controller, pci device and sm bus controller

  My hard drive died so I replaced it with an SSD.  Re-installed windows 7 Home 64 and he see fine windows, however there no connection network or the internet.  I downloaded the drivers from HP for the 1c58dx, but they won't install it.  I need to find the drivers for the following items:

  Ethernet controller: PCI\VEN_10EC & DEV_8136 & SUBSYS_169B103C & REV_05\4 & 3055DD30 & 0 & 0020

  network controller: PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00\4 & 341BB839 & 0 & 00A 9

  PCI device: PCI\VEN_10EC & DEV_5209 & SUBSYS_169B103C & REV_01\4 & 2A8AB03B & 0 & 00AA

  SM bus controller: PCI\VEN_1022 & DEV_780B & SUBSYS_169B103C & REV_13\3 & 2411E6FE & 1 & A0

  Thanks in advance for any direction provided.

  Hello:

  First install the AMD Chipset drivers and reboot.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100084-1&cc=us&DLC=en&LC=en&OS=4063&product=5193779&sw_lang=

  network controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111781-1&cc=us&DLC=en&LC=en&OS=4063&product=5193779&sw_lang=

  PCI device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100083-1&cc=us&DLC=en&LC=en&OS=4063&product=5193779&sw_lang=

• Role and authorization in the CR for the user to collect ESXTOP Stats

  Hello world

  We have a team of test and development, who wants to test themselves in their test server and staging while doing what they want in time real stats to cpu, mem, and Disk.But it not the issue of the production, so we do not want to sit with them and live real-time statistics report. Now they want the temp user are created with root privilege so that they can collect ESXTOP report by running the command ESXTOP. Then what a privilege we will give and which group the user temp will be added so that they can report esxtop only run and fired. But they have several machines virtual spead on the different cluster and in different esxi host. Any help will be much appreciated on this.

  Thank you

  vmguy

  I would modify a role in order to give them access to the "Performance report".

  With what they are going to be able to get the host or VM performance data:

  • Real time
  • Day (s)
  • Week (s)
  • Month (s)

  for the CPU, store data, disk, memory, network, virtual disks, etc.

• Except for the 2 - up Web view and devices not listed do not side by side

  Hi, I hope someone can help me with this problem. In Photoshop CS4, when I used to go to save for Web and devices screen, I liked using the 2-up view so I could see the difference between my original and the optimized versions. However, I tried to do in CS4 now and I remember seeing (in CS3 I think) where the layout of the place 2 view was side by side (vertically) so you can have the original on the left and optimized it on the right. Now, in CS4, at least on my machine (mac OSX tiger), place 2 see only the original poster and optimized horizontally (with the original on the top and the optimized below). It is a fixed provision in place 2 find out or can it be changed? Is this normal is something corrupt? I searched around for a setting or button click (that I could think of) and have not been able to find a place where the layout parameter can be changed. I know it's a very small question for most people, but I really preferred viewing the two versions side by side vertically instead of one on top of the other. I guess it's just a setting somewhere that the user could change but I know not-maybe update this interface is new to CS4 and is not customizable?

  Does anyone have information or solutions to this?

  

  The SFW window is resizable, and if you hang out in more wide than high aspect ratio, the images will be eventully pop in the side-by-side format.

• How to clean heads printer for the command Panel\Hardware and Sound\Devices and Printers\HP33CFBA (HP Photosmart D110 series)

  My impression is very light, even after changing the cartridge.  I am not computer savy and told me that I might need to clean the printer heads, but I can't find out how to do this.  Any help would be good.  Thank you, Nancy

  Hello

  
  What operating system is installed on the computer?
  
  You need to contact HP support for assistance.
  http://h20000.www2.HP.com/bizsupport/TechSupport/ContactHP.jsp?lang=en&cc=us&docIndexId=61598&TaskID=101&prodTypeId=18972&prodSeriesId=4023244
  
   
  Hope this information helps.

• I have enabled instrument, I clone a Macintosh, and when I started cc 2015 ask for the trail, but I have 81 device license, what can I do?

  Hello I have 81 licenses for device, I have a mac clone with the installation of the software.

  When I run the mac clone with a software (such as photoshop) cc ask for trial.

  How can I tell mac that I have the license device?

  
  Thank you.

  I understand that cloning could help, it must be packaged and deployed.

  Please contact the support team:

  Using creative cloud | Creative cloud to teams

  Contact customer service - creative cloud to teams

  Concerning

  Stéphane

• C7280 printer changing quality Scan for the use of "Scan to memory device" menu option

  I searched and found nothing, but I may have been usung the research tewrms squeeze, so I apologize if this is old hat, but...

  I bought some time ago, due to its ability to block supply photos and scan individual files, but not can not use due to lines that appear on scans (I'm on the 3rd replacement printer)

  See http://www.flickr.com/photos/elaref/8575326000
  Having restored to the analysis of the plate, I know I can use the software and change the quality of scanning every time, but it's far too slow (I > 10 000 prints I would scan)
  Using the front Panel "Scan Menu" and then "analysis of device memory" is faster, but as a default jpg 85% quality of the file and

  200 dpi

  I changed the value by default Scan profile, but in vain

  How can I change the default values to 100% and 300 or 600 dpi?

  Thank you

  I use Photoshop or ThumbsPlus (a very old piece of software, but I'm comfortable with it)

  P.S. the 10 000 draws is not a day, but can be spread over the rest of my retirement!

  Anyone know any other scanner that takes a bunch of 30 prints and produces a file single 600 dpi scans of them automatically?

• Set up a user profile specifically for the game

  Hi all

  I installed Windows 7 (64-bit) and use it mainly for work (Excel, SPSS, Word). I also have many programs start automatically with Windows and run as background processes. What I want to do is create a profile user who loads only minimum programs and services required to play video games. Currently I have to manually complete the applications and services, which is a pain in the thigh. How can I configure a user profile specifically for games?

  TYIA,

  Mark

  Hi Mark,

  You can create a new user profile, but you will need to put your computer in a clean boot for the new user account only State to play games and to disable applications/services that are not used frequently.

  New user account will inherit all startup applications and services of the administrator account.

  To create a user account , follow the steps in the link
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  To put your computer in a clean boot State, follow the steps in the article.
  http://support.Microsoft.com/kb/929135

  Aziz Nadeem - Microsoft Support

• Need to have a different label for af:inputText as for the error message

  Hello

  Jdev version 11.1.1.7

  In a form, I have a label for the af:inputText as a statement and not the name of the attribute.

  But when the error message is highlighted in field 2, by clicking on 'All', all error messages come in a pop-up window where I NEED TO DISPLAY the ATTRIBUTE AGAINST THE EACH ERROR MSG instead of THE REAL GIVEN to THE AF:INPUTTEXT LABEL. Please suggest an idea.

  Kind regards

  Ramey

  Try to follow these steps:

  1 - in the inputText label sets the label that you want to display in popup error.

  2-set inputText simple property to true.

  3 surround inputText by af:panelLabelAndMessage and set the label property of the label that you want it to be viewable in the page.

• Help me for the drivers XP for HP G50-123NR

  Hello, I recently haven't bought this model no HP G50-123NR notebook and I was wondering where I could get the XP drivers for it? Any help would be appreciated. Thank you

  Your model should ICH9 sata driver sliptreamed in the installer CD of XP.

  Use Nlite to sliptream ICH9 sata driver.
  A good guide for driver sata sliptream, here

  Note: do NOT use this guide sata driver, your sata driver is below ICH9.

  ICH9 sata driver,

  The pilot lies in iaAHCI.inf and is called ICH9M-E/M SATA AHCI Controller, here

  Download nLite, here

  _____

  Drivers XP for G50-123NR (Intel processor + Intel 4500MHD graphics card)

  Intel chipset (install and reboot before other drivers), here

  MS - UAA (required a reboot before Intel video-HDMI, Audio drivers and modem), here

  Intel Graphics Media Accelerator 4500MHD (with HDMI audio driver), here

  Conexant SmartAudio 221 (problem of fixed microphone by forum user) here

  or try the new driver of toshiba modded here (smartaudio works best in the new driver)

  How to install:

  Relax in a folder.run installation program.

  If it errors use Device Manager.
  In Device Manager, right click "Audio Device on HD", choose Update driver,
  Not to connect, install from a list or specific location,

  Select don't search, I will choose the driver to install.
  For the hardware Type select 'show all devices '.
  Remove control "Show compatible hardware" and click on 'disk '.
  Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
  Ignore XP when it complains.
  Reset.

  Conexant HDAUDIO Soft Data Fax Modem Driver SmartCP, here

  If you Broadcom Wireless, here

  If you have Intel PRO/Wireless Driver here

  If you have Atheros Wireless driver, here

  or if it doesn't work try here

  RealTek RTL8101E Family PCI - E Fast Ethernet NIC Driver, here

  If you have Realtek usb 2.0 card reader, here

  Synaptics Touchpad Driver, here

  .NET framework (required before HP Quick Launch Buttons), here

  HP Quick Lauch Buttons, here

  If you had for 7 unknown devices (buttons drivers), here

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

  Good luck

• I have a question about the delivery of the school.  If I start paying $19.99 a few months before that I control, I keep getting this price for the rest of the year?  Or will I stuck having to pay $50.00 per month until the contract is in place?

  I have a question about the delivery of the school for creative cloud.  If I start paying $19.99 a few months before that I control, I keep getting this price for the rest of the year?  Or will I stuck having to pay $50.00 per month until the contract is in place?

  Student discounts are good for a full year, without worrying if you drop out during this period.

  Mylenium

• Configuring the private network or disable questions for the network discovery in network and sharing Center.

  I just got my laptop all cleaned and had everything updated. When I got it back I was mainly concerned how my network and discovery sharing would work, because we never had a home computer and a laptop computer at a time. Our PC at home has always defined for a private network. Today, they are both defined for the private sector, the laptop will probably always be at home too, but I was curious to see how the printer share everything would work on my laptop. It would not print and I checked just the settings that the guy I of any program for me usually had the top settings. On my laptop that I was first checking out and the network discovery has been to custom on both, one on my PC was on, laptop has never been verified we or off, file sharing has been enabled on both. public folder sharing off on both, printer sharing turned off the PC at home, but on laptop, so much time, I guess me to turn on the PC I don't know yet. Printer password sharing is on the PC and laptop. I try essentially whether it is what you would call a custom setting make for a firewall setting, or could someone please just kinda tell me if the sharing of network discovery should be turned on on the laptop and the PC, or was it not suppose to be turned on to the laptop, but on the PC only? Which should be lit and which should not be enabled in the configuration of the private network? I just want to be able to print my laptop if I want to. Thank you

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  This article was written for the two Windows Vista & Windows 7.  Drop-down menu (right) allows you to activate Windows Vista Instructions.

  http://Windows.Microsoft.com/en-us/Windows/install-printer-home-network#1TC=Windows-7