Question of DRS HA and fully automated

Similar Questions

• Need a Script to extract information for HA, DRS levels and admission control policy.

  Hello

  I'm looking for a Cli Script to get out information for HA, political admission control and the level of the DRS for each Cluster in the CSV format with the name of the Cluster

  (1) it must be HA information, they are handicapped his license, for each Cluster in vcenter.

  Admission control 2) enabled or disabled.

  (3) policy admission policy admission control type speciying control

  (4) DRS Automation level as manual, partially automated and fully automated.

  Need this info to keep track so we have several Cluster

  Thank you

  vmguy

  If you want to select only the groups whose name starts with Cluster, you can then change the command Get-Cluster in the first line of the script in:

  Get-Cluster-name Cluster *.

• ESX 3.5 HA and DRS - fully automated parameters

  I have a two-node cluster and using DRS DRS In settings under "Fully automated" is a sliding bar to the Threshol "Migration." The default setting is in the middle. I have three questions for this...

  1: in the middle position, how long DRS allows the rampant Server eat before doing a vMotion CPU?

  2: the middle and dragging a tick in 'Aggressive' closest right how long DRS allows rampant Server eat before doing a vMotion CPU?

  3: If you select all of the "Aggressive" way, how long DRS allows the rampant Server eat before doing a vMotion CPU?

  Thank you

  Is not so much how long yet will to DRS for vMotion - the determining factor on the issue to know if DRS vmotion is if the virtual machines do not receive their last resources - so if you do not have a 'run away' vm and on ESX server is able to provide the necessary resources, the virtual machine will stay where it is at-see page 67 of the http://www.vmware.com/pdf/vi3_35/esx_3/r35u2/vi3_35_25_u2_resource_mgmt.pdf

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Question about Powerconnect M6220 and out-of-band/management 8024-K connection

  I'm sorry if this question belongs to another section, but with regard to the functionality of these switches I thought I would start here.

  My question is, the M6220 and 8024-K out-of-band connection are going through the connections on Board (for example port 18 for example) or through connection of the M1000e CMC?

  The reason for this question. We recently vlaned our network and CMC modules are VLAN 8 (10.100.8.0 255.255.248.0) and management of our switches is supposed to be on the VLAN 1 (10.100.1.0 255.255.255.0). I can't ping on the affected IPS (IE 10.100.1.15), but our CMC modules are fully accessible (IE10.100.9.120). Our blades are fully accessible and can access all the VLANS on them (they are the ESX host).

  Finally, I'm sorry if all necessary information has been provided, I'm not so much a networking guru.

  Thoughts?

  Thanks for your help

  The OOB interface is connected to the chassis management controller by the median plane of the chassis. Traffic on this

  port is separated from network traffic operating on the switch ports and cannot be lit or routed to the operational network.

• I forgot my security question answer Apple ID and my recovery email address has since been deleted and disabled. How to get answers to security questions and or change my email recovery?

  I forgot my security question answer Apple ID and my recovery email address has since been deleted and disabled. How to get answers to security questions and or change my email recovery?

  Go to https://getsupport.apple.com . Click on "see all of the products and services ', then 'More', then 'Apple ID', then 'other Apple ID subjects' then 'security issues forgotten Apple ID". If you have problems with this test of this form: https://www.apple.com/emea/support/itunes/contact.html

• We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Hi all

  We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Let's say I have a cost with 5 code cost journal

  Code 1 price

  2 cost code

  Code 3 cost

  Code 4 cost

  Code 5 cost

  BP budget approval, after that I click on New, can I add a button to the tab the line items so that when I click on this button, it reads all codes of cost in the cost journal and auto fill on the grid?

  You can create a new 'model' BP for this purpose. Line item type. Then add a line manually with a cost on each code. Then you can use the copy in your BP BA record consolidate the function to copy the line items to the new folder of BP (including all cost codes) into your folder of BA. That is to set up a model record once with all cost codes and then copy consolidate billing it to all lines new record of BA. would this work?

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• I'm lost here.  I left a message in the discussions [4 years PS E7 problems developing -?] and he was moved to the "Forum elements.  I come here and there are about a dozen question back 4 hours and no sign of page numbers.  Not a total newbie to foru

  I'm lost here.  I left a message in the discussions [4 years PS E7 problems developing -?] and he was moved to the "Forum elements. Yes, I was wrong. I come here and there are about a dozen question back 4 hours and no sign of page numbers.  Not a total newbie to forums, but I'm lost.  8-)

  I searched "4 years PS E7 developing problems...» "and couldn't find even in Discussions and notifications that it has been moved.  I would have thought that a search would have led me on the Forum of items with notes as to how much, if any, had read it.  This is what I'm used to.  As I said, I'm lost.  Sorry if it should be obvious, and if I look like a whiner.

  Viewerx wrote:

  Oh, so it has been moved, but still listed in the Discussions?  You could say that.

  When a thread is moved, it will also appear in its place of origin for a short period in order to allow the original poster to find.

  I didn't know where it was posted.  I'm not a moderator and couldn't have moved it.  Only, I went to your profile and watched your activity:

  

• I have a question? credit card and paypal are the only way to pay?

  I have a question? credit card and paypal are the only way to pay?

  Yes, the command line options are

  Adobe store	Supported countries	Payment options
  North America	To the United States, Puerto Rico, Guam, other U.S. territories, Mexico, and Canada	MasterCard, Visa, American Express PayPal for purchases of software, book, support and fonts. (You can not use PayPal to purchase subscriptions).

  You can buy retailers such as staples, amazon the redemption code or key card subscription. You'll have the linerty to choose the method of payment then.

  Concerning

  Baudier

• A question about the methods and parameters.

  Hey guys, this is my first post here. I am very new to Java and done a bit of C++ before Java. I had a question about the methods and parameters. I do not understand the methods; I know they can be repeated when it is called, but it's almost everything. I also know that a program should have a class that contains the main method. What I really, really understand on methods is what the parameters are. I know they are in parentheses and that is it. Could you explain what they are? I really appreciate it. Thanks to all in advance. Best regards, Michael

  Taking an example:
  Suppose you calculate area of the rectangle you need two inputs one is the length and the width. Area = l X b, where l = length, b = width

  If your method, say, calculateAreaOfRectangle (length int, int width) will be two parameters as arguments.

  System.out.println ("field of rectangle:" + calculateAreaOfRectangle (40,30);)

  public int calculateAreaOfRectangle (int length, int width) {}
  int area;
  Area = length * width;
  return of area;
  }

  So if you call this method then the output will be returned in 120.

  Parameters of a method are simply the input variables for the method of treatment for all calculations or something useful.

  And we cannot have methods inside the main method in Java. It is in the java syntax and if you do, it will throw a syntax error.

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

• A question about the security and economies of pdf

  Please, I have another couple of questions, but on security and the economies of pdf:

  My first question, how can I build a prompt this popup when the form is loaded or open that asks the user a certain password used to show/hide or enable/disable some fields or objects in the form?

  My second question, how can I save the form with a name derived from a field value in the form, or a user by name which is entered by a prompt window when the form is opened or initialized?

  Any ideas, please!

  Thank you

  Mustafa

  Hi Mustafa,

  I have an example here where the script in the click event of a button prompts the user a password. If they enter the password, then four locked fields are made available to them.

  http://assure.LY/ge8Ra9

  You can copy this script to the node docReady event root (usually ' form1'). It would then fire whenever the form is opened.

  One thing to keep in mind is that this solution uses a function (called "hex_sha256"), which is within a Script (called "soHASHING_SHA256") object.

  

  This allws function allows you to use the hash key, so even if the user types the password (in this case "1234"), the script converts this value to a hash of key '03ac674216f3e15c761ee1a5e255f067953623c8b388b4459e13f978d7c846f4 '.

  This means that if someone looks at the form they cannot determine the password.

  Start by copying the script object and the button in your form. Then try to move the script to the button in the docReady event. Take a look by using the LC designer for more information on script objects.

  The second issue is possible, but it is considered a security risk, so you will need to use a function of trust (which is in a separate JavaScript file that should be stored on each computer that uses the form). It is very difficult to maintain. There is a long thread here: http://forums.adobe.com/message/2266799#2266799

  Hope that helps,

  Niall

• Fully automated DRS cual're mejor opcion para trabjar con vdi

  Hola todos,

  Tengo una duda sober opcion cual en DRS fully automatic

  Tengo mas of 150 office maquinas y varios servidorres dentro del esxi host quisiera balancear carga lo mejor q can sin anti el performance of the machine.

  entonces don't be TR leave has half a ponerlo UN mas agresive UN 75% not so is a UN 75% will a comenzar a maquinas por cambio cuando realmente o any mover you need pasarse otro countless

  OPCION cual me be replaced by Recomiendan are in mi tengo mas of 150 escritorios ambiente y virtualizados no quiesiera anti el performance of las vdi

  Saludos,

  If no you puedes enabling urban en no clusters, lo mejor usar pools are (fijar base del reparto en una amount para cada uno y mas al cluster tire what if needed, pero con lo as tiene el otro reserved)

  Lo said a level of vdi. Users con 150, have al menos el repartido total en varios pools por temas performance

• find the setting of the slider bar in fully automated mode on cluster DRS

  Hello

  Anyone know what the setting for where your cursor is to the level of automation of DRS, the underside of statements is set to FullyAutomated, but I would like to know what recommendations it will apply, (2, 3, 4 stars...) or just where the cursor is located.

  $cluster = get-cluster main

  $cluster. DRSAutomationLevel

  Thank you

  Dan

  This gives the DRS watermark side

  $clus = get-cluster  | get-view
  $clus.ConfigurationEx.DrsConfig.VmotionRate
  

• Generation of fully automated reports and email

  I'm trying to get a report (of a query) runs automatically every Tuesday morning.
  
  It's my job

  BEGIN
       dbms_scheduler.create_job (
            job_name          => 'GEN_XLS_RPT_AND_EMAIL',
            job_type          => 'STORED_PROCEDURE',
            job_action          => 'gen_bomreport_proc',
            start_date          => to_timestamp('05-12-2009 07:00','DD/MM/YYYY HH24:MI'),
            repeat_interval     => 'FREQ=DAILY; BYDAY=TUE; BYHOUR=7',
            enabled               => true,
            comments          => 'Weekly CSV Reports Output at 7:00AM'
       );
  END;

  Then I have a procedure

  PROCEDURE gen_bomreport_proc IS
  DECLARE
      l_id number;
      l_document BLOB;
  
  BEGIN
       l_document := APEX_UTIL.GET_PRINT_DOCUMENT (
            p_application_id          => 109,
            p_report_query_name          => 'qry_Report_1week',
            p_report_layout_name     => 'qry_Report_1week',
            p_report_layout_type     => 'application/excel',
            p_document_format          => 'xls'
       );
  
       l_id := APEX_MAIL.SEND (
            p_to        => 'to@me',
            p_from      => 'from@you',
            p_subj      => 'Weekly Report',
            p_body      => 'Please review the attachment.',
            p_body_html => 'Please review the attachment'
       );
   
     APEX_MAIL.ADD_ATTACHMENT (
         p_mail_id    => l_id,
         p_attachment => l_document,
         p_filename   => 'report_' || to_char(sysdate-8, 'YYYY') || '_' || to_char(sysdate-8, 'DD-MM') || '-' || to_char(sysdate-1, 'DD-MM') || '.csv',
         p_mime_type  => 'application/excel');
  END;

  And the query that is supposed to have run to generate the report saved as "qry_Report_1week".

  SELECT organization_name, quote_description, quote_name, quote_pwd, user_id, contact_last_name || ', ' || contact_first_name contact_name,
    email, create_date, qty, unit_price, ext_price, discount_percent, company_name, item_no, supplier_name, product_category, mfg_part_no,
    quote_id, customer_id, exalt_user_id
  FROM bom_detail_cdw2
  where create_date BETWEEN sysdate-8 and sysdate-1 order by create_date;

  I tried to start labor

  begin
  DBMS_SCHEDULER.RUN_JOB (
     job_name => 'GEN_XLS_RPT_AND_EMAIL',
     use_current_session => false);
  end;

  I've been reading about Planner, APEX_UTIL. GET_PRINT_DOCUMENT and APEX_MAIL. ADD_ATTACHMENT, but I'm sure I missed something. Any help would be appreciated... Thank you

  Hello

  As far as I know, you need a VALIDATION in the procedure otherwise nothing goes in the APEX_MAIL_QUEUE table.

  HTH,

  Chris