Question of functional space

Similar Questions

• simple question to function test of value chain

  Hey guys,.

  I m just started using teststand.

  My simple question is related to the function "test string value '. What is the difference between the "type of comparison' CASE SENSITIVE and IGNORE CASE? From my point of view are not really meaningful names.

  To avoid simple and stupid questions like that, I tried to use the internal helper function. I'm wrong when I say that the help features are not as good as in labView? I couldn t find any answer to my question... hmmm... How other people handle this situation? (outside of just trying?)

  Thanks for your help

  Hello

  Case SENSITIVE: it will fail if you compare "HELLO" with 'Hello' or 'A' with 'a '.

  IGNORE CASE: this will pass if you compare "HELLO" with 'Hello' or 'A' with 'a '.

  Hope that explains

  Jürgen

• Big questions (not enough space for DB, don't see music)

  I had a big problem. Appearantly, napster wanted to max out of space on the "rocket". If she did. When I lit a few hours later, he gave me a message about how there was no place for a music DB.

  I went to spend a few songs on the SD card, but I found that Windows no longer saw the device as a device. He saw it as a drive.

  I'm screwed. Just play, I turned on HOLD and then disconnected everything hold back. He complained no place, but proceeded to normal operation. Once it synchronized is the media. I was able to view the settings for the USB mode then put him at PSG.

  My question is why/how he got into MSC, and why it does this as well as he thought he ran out of room?

  All sorts of reasons. Much obtained from corruption in tags and another get corruptions in memory, and sometimes you just fill too full of player.

• Questions about LUN space Reclaimation

  Greetings!

  I have a few questions for you guys.  I studied how the restoration of the deleted blocks occurs on a given data store.  Although I get orders to do so (")vmkfstools -y" in 5.0/5.1 and "esxcli storage vmfs unmap" in 5.5), I need clarification on what is actually happening.

  


  1. If the datastore is 600GB and shows 100GB free in vSphere, is the full 600GB shown as allocated on the SAN?

  2. We are running vSphere 5.1.  If I run "vmkfstools -y 50" to reclaim 50% of free space, what happens to the SAN?


  3. Does the reclamation only affect deleted blocks, or does it affect all free space?

  


  That's all I can think of for now.  Thanks!

  


  Dave S


  1. If the datastore is 600GB and shows 100GB free in vSphere, is the full 600GB shown as allocated on the SAN?

  It depends, for example, if in some time you used 550GB on the data store and remove 50 GB, maybe it will be 550GB allocated on the SAN, recovery space is performed automatically.

  2. We are running vSphere 5.1.  If I run "vmkfstools -y 50" to reclaim 50% of free space, what happens to the SAN?

  Taking the example of 100 GB of free space on the data store, if you use vmkfstools y 50, the command will create a file of balloon that is 50% of 100 GB in size (50 GB) and once the file is created, it will be removed to zero space and free up space on the SAN.

  


  3. Does the reclamation only affect deleted blocks, or does it affect all free space?

  Not 100% sure, but I think it depends on how much space you want to recover, if there is for example 100 GB of free on the store database and 50 GB of free on the SAN and you use vmkfstools y 70, ball file fills not only the 50% of the deleted blocks but over 20% of the blocks already set to zero... but of course after completion of the order you will get 70% of free space :-)

• NooB to VMware... The question of functionality

  I'm new and trying to understand the functioning of the virtual machine.  I want to know if I have Server 2008 standard 64-bit installed and you want to use the 32-bit server 2003 as a guest operating system, can I use 64-bit improvements... Using 32gig of ram on the operating system 32-bit Fords?  Right now I have Server 2003 Standard 32-bit Edition and use it as a server terminal server, about 65 sessions of remote controls at the same time, via remote desktop.  I want to use to be able to use the improvement of 32 gig on 64-bit while using Server 03 as a comment server and allowing remote connections to 65.  I don't know if this is possible, or if there is a limitation.  I was looking to see if vmware player could do this... Any help would be appreciated.

  Thank you

  No, the guest operating system is still only 32-bit and so can see the first 4 gigabytes (less a bit because of the PCI space) of RAM.  Running on a 64-bit host only fair as a 32 bit on a 64-bit machine running OS does not change address any more RAM (strange Server notwithstanding memory configurations).

  Input/output intensive tasks as you suggest, ESXi would probably be a better choice than the player.  It should provide much better performance and scalability especially on a multi core system and you will be able to expose more hearts at the prompt.  ESXi is also free but is a little more difficult to implement than Player (ESXi is an operating system, it runs on the bare metal and must be installed as such) and more stringent requirements of material.

  See: http://vmware.com/products/esxi/

  Our product free hosted server can also be a reasonable choice for your workload, it's also free.  He still has some of the same disadvantages of alternatives of hosted virtualization, but its at least intended to be run as a service.

  See: http://vmware.com/products/server/

  Reader is really designed as a desktop application.  We like to think of it the same way you would think of Acrobat Reader; a small player for a VM package.  It is not intended for things that need to be in place 24/7.

• Question of linear space color

  I ran into an interesting question using 16 bit linear exrs in AE.

  All of my 3D images is rendered in 16-bit linear space, and I went to sRGB IEC611966 - 2.1 in AE.

  I have a different color corrections in the model.  When I export an image of the model and then re-import this framework on the same comp, it is brighter than the model it has been exported since.

  
  I exported to png and openEXR with the same result.

  In PShop, I confirmed that the exported png and exr are identical in color (after cutting the exr to 8 bits).  I also know that the color of corrections have been applied in recorded images, because I have the screen captured the AE and pasted on top of the pictures stored in PShop - no color change.

  My guess is that the re-import frames are not in the correct color space, but I tried some of them using "film" w / no chance.

  
  Any ideas?

  Never mind.

  I had an effect of exposure on the layer...

• Question of empty space

  I work with a model of tables based on DreamTemplates.com (model 0055) and need help regarding the removal of the empty space at the bottom of some pages.

  I moved the margins at the bottom of the tables using the slider, but when I check the temporary site in Safari, the amount of white space is huge.  In IE, it is less the amount of space.  I also took a quick glance at the codification, but can't seem to find what I should be adjusted.

  Here is a link to one of the pages in question.

  Can anyone give me any suggestions on how to change the encoding for this?  I was not sure what the best way to publish the code here, so I left it.

  Thanks for any help you can provide.

  Hello

  Get out the explicit height pixel values 2 cells (td):

  3484

  3559

  The big empty space that you have on the bottom should be removed.

  In addition, as SnakEyez02 you suggest, I think you must post your site on the W3C site to ensure that your code is correct.

  I hope this helps!

  --

  Martin

• Question of function @PRIOR

  Hi all, please explain me using @prior function (Member, offset, list of beaches)
  If I understand well here:
  members - only one Member, we want to return the value of
  Offset - number of periods/some_members of the list of beaches
  list of beaches - choose members for offset
  
  said, we are accountable
  ACC0
  Acc1
  ACC2
  
  How should I set the formula with the function @PRIOR if I want to calculate:
  (1) acc2 = acc1 from previous months of N, where N is stored in acc0
  (2) acc2 = acc2 in the previous months of N, where N is stored in acc2 in custom_member2 of custom_dimension2

  Have you tried that?

  "ACC".
  (
  "ACC" = @PRIOR ('ACC_VALUE', 1, "YearTotal");
  )

  Does it work?

  Have you tried that?
  "ACC".
  (
  IF ("ACC_PERIOD" == 1)
  "ACC" = @PRIOR ('ACC_VALUE', 1, "YearTotal");
  ENDIF
  )

  My question is this: your formula works by itself, or it is not? If she's not going without the IF, it is not likely to work next to YEW.

  Kind regards

  Cameron Lackpour

• question of functions call listItemComponent

  Hi all, how to call the function (which is defined outside the ListView) in listItemComponent?

  Container {
      id: cont
      function getColor() {
          return Color.Black
      }
      ListView {
         id: colorList
         listItemComponents: [
             ListItemComponent {
             type: "listItem"
             Container {
             id: item
             background: ???.getColor();
  

  If you want to do this, you need a double function call

  Container {
      id: cont    function getColor(){        return Color.Black;    }
      ListView {
         id: colorList       function getColor(){           return cont.getColor();       }
         listItemComponents: [
             ListItemComponent {
             type: "listItem"
             Container {
             id: item
             background: item.ListItem.view.getColor();
  

• Question about function

  Dear After Effects community, I'm doing something wrong. I started with the example of skeleton and changed to what I thought, I want it to do, however, it does not work. I changed the "MySimpleGainFunc8" and "MySimpleGainFunc16" to look like this:

  () MySimpleGainFunc16

  void * Conref.

  A_long xL,

  A_long yL,

  PF_Pixel16 * inP,

  PF_Pixel16 * output)

  {

  PF_Err err = PF_Err_NONE

  TempR PF_FpLong = 0;

  PF_FpLong tempG = 0;

  PF_FpLong TempB = 0;

  Output->alpha = inP->alpha;

  Output->Red ->Red + tempR inP = * 0.5;

  Output->Green = inP->Green + tempG * 0.5;

  Output->Blue = inP->Blue + tempB * 0.5;

  tempR = inP->Red + tempR * 0.5;

  tempG = inP->Green + tempG * 0.5;

  tempB = inP->Blue + tempB * 0.5;

  return err;

  }

  Now, what I want to do, it's for each image, the color of each pixel in the previous image should be averaged with the color of each respective pixel in the active frame. The function that I put in place now does not seem to work properly. When I apply the effect to a composition, nothing happens at all. Can someone please help me try to understand where I'm wrong. Thanks in advance!

  I find it difficult to follow what exactly is happening there, but it seems that you are a little confused as to how the functions are defined, and where should things go exactly.

  In your header file (formerly skeleton.h):

  -Set your RenderData structure:

  struct RenderData {}

  PF_EffectWorld * prev_frame_world;

  };

  (It is noted here that you can put what you want in this struct - everything you may need to access in your function iterate).

  In your main file (formerly skeleton.cpp):

  -Set your sampler of pixel outside any other function:

  Inline PF_Pixel * sampleIntegral32 (PF_EffectWorld & def, int x, int y) {}

  return ((char*) def.data (PF_Pixel *) + (y * def.rowbytes) + (x * sizeof (PF_Pixel)));

  }

  (Note that I used 'inline' rather than 'static' - this will give you a hint to the compiler to Inline the contents of the service where you call SampleIntegral32 directly, but you can use static, if you want. For some reason, you had declared it as static PF_Err, which returns a PF_Err, rather than the PF_Pixel *)

  -Your iterator or several functions:

  () MySimpleGainFunc8

  void * Conref.

  A_long xL,

  A_long yL,

  PF_Pixel8 * inP;

  PF_Pixel8 * output)

  {

  PF_Err err = PF_Err_NONE;

  RenderData * render_data = reinterpret_cast(prevframe);

  PF_Pixel * p_prev_frame = sampleIntegral32 (render_data-> prev_frame_world, xL, yL);

  Output-> alpha = (inP-> alpha) + p_prev_frame-> alpha * 0.5; I think that's what you wanted to do, no?

  etc...

  return err;

  }

  -Your function of rendering:

  PF_EffectWorld is exactly the same as PF_LayerDef. You withdraw your OK setting (even if the parameter ID "SKELETON_GAIN" is probably a cursor rather than the input layer. You can use 0 (zero) here, as the first parameter is always the PF_EffectWorld of entry, but read on, the first param is the enum SKELETON_INPUT, so we will use.

  PrevFrame PF_ParamDef = {};

  ERR (PF_CHECKOUT_PARAM (in_data,

  SKELETON_INPUT,

  in_data-> current_time - (1 * in_data-> time_step), / / I think it's a good...

  -> time_step in_data,

  in_data-> time_scale,

  & prevframe));

  When you go wrong here is that you are trying to make a PF_ParamDef to a PF_EffectWorld in your render data. You must point the layer data instead:

  RenderData render_data;

  render_data.prev_frame_world = & prevframe.u.ld;     Point your def of layer prev_frame_world pointer in the union

  ERR (suites. Iterate8Suite1()-> iterate (in_data,

  0, / / basic course

  output-> height, / / final course. Use linesL if you set as on the skeleton model

  & params [SKELETON_INPUT]-> u.ld, / / src

  NULL, / / area - null for all pixels

  (void *) & render_data, / / Conref - your custom data pointer

  MySimpleGainFunc8, / / function pixel pointer

  output));

  Check in this setting!

  Err2 (PF_CHECKIN_PARAM (in_data & prevframe));

  And it should work I think! It's not tested, but the basics are there.

• Question about functions in pipeline

  Version: Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  Hello

  I have a Pipelined function is used in a 4.1.1.00.23 APEX application. The function should return an array object to use in the WHERE clause of the query. So far, all of the values used in the function have been digital. Now, I have alphanumeric values and I get an error 'Character of digital Conversion'.

  A Pipelined can only use digital data?

  The function of reference is:

  FUNCTION to CREATE or REPLACE get_list (p_string in VARCHAR2

  , p_delimiter IN VARCHAR2 DEFAULT ':'

  )

  RETURN vc_array_1

  PIPELINED

  IS

  l_array

  wwv_flow_global.vc_arr2; -Creates a table type.

  BEGIN

  l_array: = APEX_UTIL.string_to_table (p_string, p_delimiter); -API to separate a delimited string colon by in a table.

  	BECAUSE me IN l_array. FIRST... l_array. LAST
  	LOOP
  	LINE (TRIM (l_array (i)));
  	END LOOP;

  RETURN;

  END;

  I thought that, given that the parameters are of type VARCHAR2 passing a valid value could be used. Apparently, I'm wrong?

  The WHERE clause that is used is in the format:

  ...

  WHERE < column_name > IN (SELECT * FROM TABLE (get_list (: P127_BASELINE_INIT_NAME)))

  ...

  If only the digital data can be used, how to use alpha-numeric values?

  Thank you

  Joe

  Stako, Anton and Jason thanks for your help!

  While I was waiting for my company to get the security put in place so that I could use sqlplus I was talking about this problem with another developer and it turns out that the function had NOTHING to do with this problem.

  It was all the me. The values passed into the function is from a Select list that allows multiple selectable values and this is whence the colon delimited string.

  IF no value is selected, it is a default value that can be used to not limit the number of rows in the WHERE clause. I used a 0 (zero) as a return value, so as the data type of the column is VARCHAR2 he compared a numeric character; where the error.

  The "bug" has been corrected and of course no error!

  Thank you all again!

  Thank you

  Joe

• Question of function parameter

  OK, I have a function where I am going through a lot of vmhosts, but when I spend say get-vmhost for guests and print the $vmobject it only lists the first object.  What Miss me about the parameter part?

  function {} host_info

  (param

  [CmdletBinding()]

  [Parameter (Mandatory = $true, ValueFromPipeline = $true, ValueFromPipelinebyPropertyName = $True)]

  $VMObject

  )

  $vmobject

  }

  Hello, markdjones82-

  Regarding the part parameter $VMHostObject Parameter(), you are not missing anything that is causing this behavior.  The 'missing' thing is the scriptblock {} in the body of the function.  To get it to behave like you want to, you must add a such scriptblock.  See the example below based on your initial function: he writes messages documented in each of the scriptblocks Begin, process, and end.  This is so that you can see the difference when you use the function with either a direct value by passing (to a param) or with values from the pipeline.

  function Get-VMHostInfo {    [CmdletBinding()]    Param (        [Parameter(Mandatory=$true,ValueFromPipeline=$true,ValueFromPipelinebyPropertyName=$true)]        $VMHostObject    )    begin {Write-Verbose -Verbose "starting; this 'begin' scriptblock only runs one time, and, if a pipelining example, this is before any param variables have values (see:  the value of `$VMHostObject is '$VMHostObject')"}    process {        Write-Verbose -Verbose "in the process scriptblock, either once (non-pipeline example) or for each value passed in a pipelining example"        $VMHostObject    }    end {Write-Verbose -Verbose "in the 'end' scriptblock, and only once"}}
  

  When you take values from the pipeline, is an 'Advanced' function that PowerShell believes that it is, and the advanced functions behave a little differently.  To see the differences, to call this function in one of the following ways and verbose messages as well as the output objects must light up.

  ## non-pipeline example:  should have just three verbose messagesGet-VMHostInfo -VMHostObject (Get-VMHost myhosts.*)
  
  ## pipeline example:  should have larger number of verbose messages:##   one for begin{}, one for every VMHost in the pipeline, and one for end{}##   and, the value for VMHostObject in the verbose message in the begin{} should be emptyGet-VMHost myhosts.* | Get-VMHostInfo
  

  And the suggestion to the name of the function: use standard PowerShell verb-noun, for consistency, attractiveness, etc..  In addition, you can learn more about methods of treatment of function entry in the help topic for about_Functions_Advanced_Methods (Get-Help about_Functions_Advanced_Methods).

  How does do for you?

• Question of function-based Index

  Hello Experts,

  I am wondering something simple relating to the funcion according to index. Lets say I have a FBI something like the following.

  CREATE INDEX idx my_fbi ON my_table (substr (nls_lower (my_column),1 25));

  Maybe it's a very basic question, but SERIOUSLY, I want to know. My question is, when I use this index, including the rating should I use other side of the equal sign? and WHY?

  SELECT * FROM my_table WHERE substr (nls_lower (my_column),1 25( ) = 'ali';

  OR

  SELECT * FROM my_table WHERE substr (nls_lower (my_column),1 25) = substr (nls_lower ("ali"),1 25( );

  Thank you 1 million for your great comments.

  Best regards

  Charlie

  using value once the '=' sign would be more effective if you already know the value because in this case Oracle does not need to evaluate the expression, but if the values are not known, then you have to use the expression.

  Exact values are more efficient than expressions, especially when the expression is already evaluated and it must be evaluated at run time.

  Onkar

• Question about function table in pipeline

  I did an object:

  CREATE TYPE FML_DAT_ITEMS_OBJ AS OBJECT ("F0"      varchar2(4000), ...

  Then I did an object table:

  create or replace type fml_dat_items_ftab is table of FML_DAT_ITEMS_OBJ

  Everything is fine!
  
  Now, I want to do the function pipeline:

  create or replace 
  FUNCTION get_fml_items_dat (pfml_nr in number) return fml_dat_items_ftab pipelined as
    
     out_rec FML_DAT_ITEMS_OBJ := FML_DAT_ITEMS_OBJ() ;
     
    begin
       select item_dat into out_rec."F0" from fml_dat_items where fml_nr = pfml_nr and item_nr=   0.00;
       pipe row (????); -- HOW can I pipe the object to the function result set?

  Published by: Walter on 14.05.2013 05:29

  Hello

  Try this:

  create or replace type FML_DAT_ITEMS_OBJ AS OBJECT
  (
  f_name varchar2(20)
  ,l_name varchar2(20)
  )
  ;
  
  create or replace type fml_dat_items_ftab as table of FML_DAT_ITEMS_OBJ
  ;
  
  select
    *
  
  from
    table(fml_dat_items_ftab(FML_DAT_ITEMS_OBJ('peter', 'zwan')
                            ,FML_DAT_ITEMS_OBJ('peter', 'zwan')
                            )
          )
  ;
  F_NAME               L_NAME
  -------------------- --------------------
  peter                zwan
  peter                zwan                 
  
  create or replace
  FUNCTION get_fml_items_dat (pfml_nr in number) return fml_dat_items_ftab pipelined as
  
  --   out_rec FML_DAT_ITEMS_OBJ := FML_DAT_ITEMS_OBJ() ;
    out_rec FML_DAT_ITEMS_OBJ ;
  begin
     select FML_DAT_ITEMS_OBJ('peter', 'zwan') into out_rec from dual;
  
    for i in 1 .. pfml_nr loop
      pipe row (out_rec);
    end loop;
  
  end get_fml_items_dat;
  /
  
  select
    *
  from
    table(get_fml_items_dat(2))
  ;
  
  F_NAME               L_NAME
  -------------------- --------------------
  peter                zwan
  peter                zwan                 
  

  Hope this helps,

  Kind regards

  Peter

• Question of function error 1006

  Hi I'm new to actionscript. I'm trying to resize a movieclip when I click on it and I get the following error:

  TypeError: Error #1006: value is not a function.

  at Untitled_fla::MainTimeline/resize_fn()

  Here is my code

  import flash.events.MouseEvent;

  import flash.display.MovieClip;

  circle.addEventListener(MouseEvent.ROLL_OVER,size_fn,false,0,true)

  circle.addEventListener(MouseEvent.ROLL_OUT,resize_fn,false,0,true)

  function size_fn(e:MouseEvent):void {}

  Circle.Width (3);

  Circle.Height (3);

  }

  function resize_fn(e:MouseEvent):void {}

  Circle.Width (1.1);

  Circle.Height (1.1);

  }

  no idea what I am doing wrong?

  Thanks in advance

  Chamces are that the problems are where you treat the width and height as functions rather than the properties...

  Circle.Width (3);

  Circle.Height (3);

  normally, you assign values to the width and height properties, they are not functions.

  Circle.Width = 3;

  Circle.Height = 3;

  but I suspect you weren't their definition to these small values may be that you're trying to scale them?  (If Yes use scaleX and scaleY instead of the width and height properties)