QUESTION of HANDSHAKING ULTIMATE PLAYSTATION 3 WITH SONY TV (help)

Similar Questions

• Bad experience with Sony XA Ultra and Sony customer

  FROM THE DATE OF PURCHASE, I DO FACE IN HEATING SO THAT THE INTERNET AND USING CAMERA AS TO BLOW UP. I USED THIS PHONE ONLY 14 DAYS DON'T CALL AND SMS DUE TO HEATING QUESTION FINALLY, I PRESENTED MY SET WITH CARE CENTER AFTER ALL MY BUSY SCHEDULE BUT COMPANY SONY WILL REPAIR MY MOBILE JUST GIVES ME NO REPLACEMENT.

  THE MOST INTERESTING IS TO HANDLE BOTH CLIENT EXECUTIVE EMBEZZLED ABOUT ME AND IGNORE MY REQUEST.

  FEATURED IS NO GUARANTEE OF THIS PHONE OR WE BREATH. MY LAST REQUEST IS TO REPLACE MY XPERIA ULTRA XA.

  ALREADY, I WEASTED MY 14 DAYS. ABOVE MATERIAL TAKES TIME AND I DON'T KNOW HOW MUTCH TIME REQUIRED.

  I feel really discouraged by my experience as owner XA

  My phone has 4 different flaws

  they have blamed my phone and offered a replacement then withdrew the offer

  I was not offered a replacement during the repair.

  Now after posting my phone 5 days ago, they don't have it.

  pretty tired of this - 2 months old phone = horrible

• Error is 0 x 80131604 missing when message burnig a bluray with Sony DVD architect 5.2

  Original title: error message is missing 80131604 0 x

  This is the message I get when burnig a bluray with Sony DVD architect 5.2, the process of creating my bluray stop when this message appears.

  all solutions? Thank you.

  Hello
   
  I suggest you to consult the section troubleshooting steps and check if it helps.
   
  https://www.custcenter.com/app/answers/detail/A_ID/5044/~/message-missing-error-0x80131604
   
  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  
  I suggest you to contact Sony support site for assistance.
  
  http://eSupport.Sony.com/

• Cannot connect to mlb.tv with sony BDP-S5100

  Hi guys,.

  Simply, this has started to happen Friday, May 9, 2014 (it worked fine for months until now).  When I select MLB.tv to the homepage. He tries to connect but all is see on my screen is a circle of white dots that keeps circling away forever.  I can't stop it and I can't yet go home from there.  Literally, I have to unplug my OTP unit to get out of this State.  I noticed the connection to SEN did the same thing.  He's going to try forever.

  Netflix works great also.  I checked the settings of my network and internet several times and they are all good.

  I use unlock us since I live in canada, but that has worked well for several months...

  Also, my Samsung blue Player connects to MLB.tv on my account very well, so this isn't my account with mlb or something like that.  That would use we unlock so my account should be good.

  This seems to be a matter of sony.  Help, please

  Me again... I thought that to put an update to other users.

  Good news.  I got it to work...

  (1) I unplugged the unit for 2 minutes

  (2) I then did a reset to factory of all attributes.  Make sure you do all, not only the network settings.  I believe that this issue has something to do with another parameter.

  (3) I have set up the network again.

  (4) I returned and selected the application of mlb and he asked me for my login again information.

  (5) then it worked fine

  It took about 5 minutes.

• my life chat lx-3000 does not work with Windows 7 help plz__

  my life chat lx-3000 does not work with window 7 help please

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't download or install my free InDesign trial whenever it happens to the cloud it comes up with error (-55) help

  Failed to download or install my free InDesign trial whenever it happens to the cloud it comes up with error (-55) help

  Hi Jessicam35650393,

  Please let us know when exactly this error pops up.

  To attach a capture in thread view screen, the specified item was not found.

  Alternatively, you can try to uninstall the creative Cloud Desktop application using uninstall the Adobe Creative Cloud desktop application

  Then reinstall Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

  Until then, refer to the help below links:

  Solve the common activation Adobe Creative Cloud (login) and questions (disconnect) disabling or error messages

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Troubleshoot Adobe Creative cloud download, install and update questions

  Let us know if that helps.

• cannot delete photos with indicator.  help, please.

  I can't delete photos with indicator.  help, please. Thank you. Dick

  Can't stop without context and details

  What version of the OS (you say OS X 10.8.5 - is that correct?) and iPhoto or PHotos?

  What has changed since it worked?

  LN

• How is it possible to specific your own, with the constant help of string to locate a directory where the NEW

  How is it possible to specific your own, with the constant help of string to locate a directory where the NEW
  created the folder to save?

  
  

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Questions of Q10 Q10 blackBerry Hope J Sanders can help

  Hi I'm new to this forum so apologies in advance if I have bad things. I've always used my last phone torch I loved & waited for the Q10 among many ridiculous according I have friends to BlackBerry phone & Samsung. I went for the 4G active even if I knew that our home would not receive it but figured it would default to 3G, etc.. I was told that my service/reception would remain the same. Unfortunately, this was not the case. My part in all home play, it was my BlackBerry torch was the only phone that could send & receive text/email & make & receive calls. Now all I can be guaranteed is by e-mail. Text is not reliable, called a chimera. I pick up is no longer UMAs (can be a factor). Do not understand that at all. Due to go to the hospital for an op & just recover, I missed the option 14 days as I prefer the above services obviously as I am unable to be contacted when other than the email home. I'd go sim only on my torch. Another very strange/weird problem arose when I tried to enter my email BlackBerry existing my torch to the Q10, it was an impossibility. I spent 3. Hours in phones for U (where I've improved) with a very helpful member of staff (not the store where I've updated) after 3 phone calls from hrs 2 rim technical support who spoke also told because BIZ? Is more on any new BlackBerry (Rim tech support) had to do something their end to allow me to keep my BlackBerry email. What she did quickly yet Q10 still insist on a redirect don't email so no go. RIM technical support (same woman) then says Orange to send through the beam of my BlackBerry on my contract. According to Phones 4U, this had been done. Out of curiosity I asked chap in store of EA that got EA don't do not all beams and even less those of BlackBerry. Needless to say I had to have a new email, I don't want and find it unacceptable that I can't have my existing BlackBerry address that caused a nightmare on the sphere of work. I gave up printing & while the cosmetics of the Q10 is good for me it is essential to make a phone call from home & I really can't my head around why I can't now be on my wonderful state of the Ark of BlackBerry. All I wanted was a new BlackBerry with the same facilities. So no installation of appeal / risky text & unable to keep my existing BlackBerry email address. If I worked for BlackBerry I would not promote this as progress. My colleagues of loyal BlackBerry knowing my experience re calls & email address were not for the Q or Z 10. I myself am currently lamenting also detach my BlackBerry Torch. At home, it seems unnecessary to have turned it on. Can Sanders J maybe give me some advice on how or why the service I get now is much lower on my torch (at home). Thank you Dawn

  Welcome to the forums.

  Q10 is a completely different device any other prior BB device. It uses no BIS. It uses standard data available from any carrier plans.

  Secondly, with regard to the electronic address .blackberry, which was a feature of BIS and do NOT rely on only this e-mail address. The problem with it is that there is no way to access this e-mail from other devices as a compatible device BIS BB and only to the company that accompany you. If you change carriers, you will lose the email address. They are gradually.

  With respect to coverage, your device should be 2 G, 3 G and 4 G. You can go into the settings of Mobile network and make sure that it is set for all bands. UMA is NOT available (yet) on any device BB10. If you you ranking on UMA and then the peripheral BB10 aren't for you. I said UMA is coming, but have yet to see on any carrier and I am not 100% sure it is actually coming. I have not seen any documentation anywhere saying that Q10 or the Z10 are UMA compatible devices, so that shouldn't have been a surprise. If you have been told that it had UMA in the store while they were inaccurate.

• I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works

  I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works?

  Try to hold the alt/option key while you restart Lightroom. Make sure that the right catalog file is selected and click on the "integrity test" box to see if there is a problem with the catalog file that might be repaired.

• Linksys AE2500 is compatible with Sony adapter to use on a DVD disc Blu - ray BDP-S370 player?

  Linksys AE2500 is compatible with the Sony adapter for use on an of DVD disc Blu - ray player BDP-S370 to connect to a wireless network?

  Hello Jaime,

  Only the UWA-BR100 wireless LAN adapter is supported for use with the Sony BDP-S370 Blu - ray disc drive to connect to a wireless network. Sony has tested the adapter LAN USB UWA BR100 and it is guaranteed to work with the BD player. Adapter USB LAN wireless from other manufacturers may work, but Sony has not tested the and as a result, operations are not guaranteed.

  If my post answered your question, please mark it as an "accepted Solution".

• Problem with SONY DCR-DVD650. Unable to get the finished videos transferred to my computer.

  Hello world

  I have a Sony DCR-DVD650... I also use the mini DVD - RW for recording.

  When I put the DVD in my computer, or you are trying to access via a USB cable connected to the camera, however there is no videos. I can clearly see the videos in the preview of my camera...
  I've also developed videos...
  Solution Explorer displays a single folder which is DVD_RTAV which includes 3 other files 'VR_MANGR. BUP', 'VR_MANGR. IFO' and 'VR_MOVIE. VRO.

  What I am doing wrong? And how to get these videos on my computer to be able to
  Change them. Help, please! Would really appreciate it, thanks

  The basis of the record that you have seen inside the disc, you saved your footage in [VR mode]. The DVD_RTAV folder that you found inside the disc is indeed the folder that contains your images, and you can go ahead and copy the contents of this folder. The more you can do with these files is to find a software that will be able to read. It is not possible to change them on a computer.

  To ensure that you will not work in this problem next time, please save your videos in the standard [MOVIE mode] instead of [VR mode]. Once you have done so, you will find your images in a folder named [VIDEO_TS], and you will be able to copy and modify these files.

  If this post answered your question, please mark "accept as a Solution.

• Why Canon does not have old adapters for my SLR camera lenses? I can get them with Sony, but not for Canon

  I have an old Canon Ftb with a goal of 1.4 fd. I'm getting into digital cameras now (just to have a 12 G for now, mainly used for underwater photography). I would like to stay with Canon, but I'm very annoyed that Canon doesn't have a way to continue to use their old lenses. Nikon, for all their flaws are much better at you can continue to use your old stuff.

  Then I find that if I'm going to Sony (Yes, really, Sony) can I use my lenses from Canon ol via an adapter. This my Canon, tell me it ain't so. You must have a way, I just have not yet discovered.

  There are many challenges with this and the "adapters" are to be considered with a certain scepticism.

  The FD lenses are mechanical - no electronics.  The case of the unit, on the other hand, has an electronic interface for the lens - nothing of mechanics.   This means that if you set the goal, you would have to manually set the aperture but also of manual focus of the lens.

  Your Canon DSLR had a split Prism focusing in the viewfinder to help.  A new camera does not work.  The reason why there is no help from the development is because most of the lenses are autofocus so it is simply not necessary.  This makes it particularly difficult to tell when you've worn exactly the goal.  Making it even more difficult is that any device with a sensor size of APS - C (most of them) have a small viewfinder that you had on your Canon SLR photography.

  In addition, the lenses are optimized for a specific back focus distance.  Canon's EOS cameras have a depth of 44 m from the mounting flange of lens at the front of the body at the level of development within the body.  When you use an adapter, it modifies that distance.  If you change too much, the lens behaves as if it is mounted with extension tubes, the entire range of focus is moved closer to the camera, and it can be is no longer able to focus to infinity.

  There are 3 parties that make these lenses... conversion kits but they do them for a few drinks (not all) and that they require a bit of surgery on the goal (e.g. this level which protrudes beyond the rear of the lens used to set the aperture value should go).

  But... the modern lenses are just so much better than the old FD lenses.   Requires really quite the dozen FD lens to make it interesting this fuss.  Also, I own a Canon SLR (AE-1) and a few glasses of FD... but have no interest in trying to use one of these lenses on my EOS DSLR cameras.

  I think that this question almost as Ford asking why they do not wheel adapters let wheels it T model mount on a Mustang of 2015.  The new wheels are so much better than the old wheels, you want to continue to use the old wheels.

  Leave your old lenses in the past.  Mine are on the shelf alongside my AE-1... body as a conversation piece.  I don't actually use them.

• Problem with Sony 16-50mm f/3.5-5.6 lens

  I had this problem for awhile now, whenever I turn on the camera (Sony a5000) with the 16-50mm lens, the will of the right lens extend and retract endlessly with the goal of opening and closing the shutter. The extension and retractable stops after 5 seconds or more and I am displays the error message 'unrecognized Lens. Please reinstall lens. "I also noticed an unevenness of the lens when it is completely retracted. one side of the lens is higher than the other side. I tried to reset the camera settings and clean the contacts. My camera body works well because I used another lens and it worked perfectly. Here is a video recorded demostrating camera my problem. Feel free to leave comments on what could be the problem and how I can solve this problem.

  https://www.dropbox.com/s/bp9acmdp493indk/20150214_115747.MP4?DL=0

  Hello

  What you described about the error and the unevenness of the lens, I would say that the lens would require service. I recommend the lens in sending one of our authorized Service centers.

  Sent a PM on where you can send the camera.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch