Question of the Master Page

Similar Questions

• Question of the Master Page Architecture

  New site needs a main page of the company, which then directs the customer to choose one of the two store restaurant locations which each will have its own pages with its options, somewhat different from the other chain store location.  What architecture will better serve this kind of situation?

  The name of your master pages are not relevant. Only, you see these names. You will need to set the page name in the page properties.

  I don't know what you mean by levels? On the plan view? If so, I would have probably a three-page senior level (hand, store 1 and 2 to store) and then direction from there. But it's really hard to say without knowing how many pages you have etc.

• Master Page Items question: I use master pages for a 60 page document and just found out that some of my master page items are multiplying! There are some boundaries on the pages and some of them are constantly a quantity apparently endless on top of e

  Master Page Items question: I use master pages for a 60 page document and just found out that some of my master page items are multiplying! There are some boundaries on the pages, and some of them are constantly a quantity apparently without end on top of the other. For example, I replace to change the color of the border and notice a black there's below him so I deleted the extra and there is another and another and another... EEK. I can easily hide them, BUT I fear they will lead to complications in the case of pre-press printing. What is the cause? What can I do to prevent it? How can I get rid of the stack-up?

  It's always haapening, if you substitute any element on the page and later master you reapply the same or another master. I would NEVER say to replace any itme master page in the page. Instead create another master based on the first, make the substitutions and apply this master. Substitutions on the pages should be avoided in all cases, not only for the problem you described above, other issues of accessibility will also come into play.

• How to identify the master page of replacement

  I think that this forum must be broken. Surely questions have been over the years who use the term "ignore".

  Anyway, every time I move a master page for the body, I get the message asking if I want to maintain the substitution. I looked and looked and did not find that on the page of the body is the substitution of the master page.

  How will I know which chokes on Framemaker? I use FM 12 in Windows 7.

  Thank you!

  Hi Nancy:

  I know! We must put our detective hat and grab our magnifying glasses to understand. You can put it on a list of gifts here: host.

  From my experience, once removed, always removed. Are back you (or someone in your office) do anything to add in without knowing it? For example, by selecting the single page framework model and makes it a little more time to accommodate an additional line? If the framework model is just a fraction of a different point in the frame of the page master, it generates the message.

• Menu on the master page.

  I have a question, I've done my menu on the master page and created all kinds of individual pages. Now, I want to be able to use the content in the site properties menu, so I could choose what is happening with my links page or after your visit. But because there are all the individual pages it reloads all the time and nothing happens. I hope I made clear what I mean and can someone tell me how to do it. So the objective is to have a menu on the master page, very simple just something like:

  link 1

  link 2

  link 3 (text) and they are on each page and I want to make them fat, when someone is on this page and I want to let them italic when someone visited this page.

  Thanks in advance!

  In the properties of your site, you can set the styles of link. Select that box for visited italics and "BOLD" box for the assets.

  

• Add a link to the language at the top of each page; the master page logo does not...?

  I have a Logo in the master page, and all my pages have this logo, when it comes to adding a link of language on each page it only allows me to put a link and not several 'INTERLANGUAGE links to each of my pages in my Web site creation.

  NEED HELP FOR THIS... ANYONE...?

  I managed to do it myself, maybe I Specifies not or posed the question correctly; I've done the following:

  I caught the layer where the captain: which was the first right up and lowered down, which seemed to help me.  in so doing, I could add links to all my pages in the top left corner, because by the uprising of the page master layer with my logo at the top of the page on the op of all layers trumping any link I would put in all my other pages, by lowering the master page layer to the last section of the layers I was able to make the link in the upper left corner, without him be overshadowed or covered.

  Thank you

  Shawn.

• Bringing the master page in the front and sub navigation menu

  Hello

  I have two problems with my menu. I have my menus in a master page which was pinned to the top of the page and 'sent to the front', but when you view the pages with that master has been applied, the menu goes behind the content of the page. Is there a way to automatically move the master page in the face? Or do I need to copy and paste my menu for each page manually to adjust its location in the layers panel?

  

  

  This effect can also be found on Forecaddy

  My second question is the State of the menu 'active' for void menu items. When on the page projects of active state is how I want, with the grey wire dark around the item of menu "projects".

  But after clicking on a submenu item, I want the item menu 'projects' to stay active

  

  Is it possible to do it automatically using the menu widget?

  Thank you very much for your help!

  To answer your second question:

  • To change the active appearance of the menu items, you must change their appearance of States.

  To do this:

  • Double-click the master page that contains the menu widget
  • Click on the widget to select the full menu.
    
  • With the selected menu, move your cursor over one of the menu items (home, About Us, Contact us etc) and click on the menu item and view the States Panel.
  
  
• You can use the States Panel to modify the appearance of:
  • Normal: inactive appearance that people will see when you do not see the page.
  • Turnover: the appearance that you will see when you move the mouse over a menu item.
  • The mouse down: the appearance when the mouse button is in the "low" position (clicked).
  • Assets: the appearance of your menu item have when someone visits this page.
• Click the active state, make design changes required to select.

Note: By default "Edit together" is enabled for widgets menu, this means that the States of this edition a menu item will automatically apply the same setting to the rest of the menu items.

To do this change the behavior edit together:

• Click on the blue arrow at the top right of the widget to display the options.
• Select or deselect change set.



See you soon,.

CARI

• Markers of script on the Master Pages

  On the Master Page to a document ID6, I have the < firstlast_ buisness > header that is labeled with the script editor. This is necessary for the entry of the first and the last company appears in the header. Example: The following data appear on the page... Business_Name > Person_Name > address etc. I want the Business_Name to appear in the header. I am running a CMS data and the "Business_Name" is mapped to the stylesheets through tags and in the body appears correctly. My question how to make the 'Business_Name' appear in the header? I inherited the model and currently I have the 'Person_Name' which appears in the header, I need to change but can't find where?

  I don't know how you would do this with scripts, but usually, I had simply use a pair of variables in the header running with for the paragraph style, a game on the first page, the other game to last.

• Table of contents using a style/section of the master page

  I'm at the top of my head I think... and probably incorrectly to the top of my document.  I hope I can quickly explain where I am:

  Question 1

  I'd like a Table of contents to use 10 section headers that appear throughout my document.  Here's how I set up:

  • In the master page, a place for the header of section and it gives a paragraph style.
  • Then, throughout the document, I used the "numbering and section options" start each new section and give this article is the unique name.

  When I went to generate the Table of contents, I've specified using this particular paragraph style that I used for the section headers, but nothing appears (except for the title, I asked for the General table of contents).  It's as if this isn't to find the sections - or this style (which applies only to the master page).

  Where am I wrong?

  Question 2

  I wish that my Table of contents, not numbered.  How do I do that?

  Shanell

  I don't know that you understood my post. I was able to do exactly what you did - create a master page with a frame and the section marker character (indicating "section" on the master page) and then add the actual text of the marker in the numbering and section options. The text appears on the page of live document.

  When I tried to do a table of contents, text was not resumed UNTIL I selected and carried this master frame on the page of the document (Ctrl + Shift + click on Windows or Cmd + Shift + click on Mac on the image that you want to replace). After substitution, the text appeared as scheduled in the table of contents.

  You're right about the number of page for this page. You can use another master without a page number, or you can cancel and delete the master page number frame. I assume that you will need to use a different master for the first page and pages in any section to avoid having the marker appear on all pages, or you can replace only the first page so that you don't repeat entries in the table of contents for each page of each section.  If you use the marker as a running header Section, you can learn more about Variables header running in the help files in place. In many ways, the use of a variable can be simpler and more direct.

• On the Master Page of the page style to add changes

  Hello

  I have a question about adding Page Mater in my list of topics, styles of change topic (page)

  I followed ongoing measures are here:

  1: create a project by importing a word doc.

  2: set the Master Page by file > new > Master Page.

  3, select all or a topic in the list of topics > right click > select Properties, and then add the master page

  Do more high style of the steps in the topic in which I added some changes of master page

  Please help

  Thank you

  Hello

  It would seem that the Master Page has an associated Style sheet (CSS file) that differs from the first page you associate with that.

  Fortunately, this is a fairly simple process to re - associate a style sheet given with one or more subjects. Just open the pod of the list of subjects, select all, right click and choose Properties. Click on the appearance tab, and then choose the CSS file.

  You can also change your Master Page so that it references the CSS file. In this way, when you associate it with the subjects, it should carry along the desired reference of the Style sheet.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• detach the Master page elements results in duplicate

  Hello

  People in my office are calmly a new problem with some documents - if we want to edit a Master Page to a page item, we do our usual command-shift-click to remove the issue of the master. In the past, this would result in the element becomes editable. But now when we command-shift-click, InDesign creates a copy of this issue, that it sticks on top of the Master Page element. There seems to be no way to change or get rid of the issue of the Master Page.

  I tried different possibilities in the Pages menu, for example, by selecting the page in question and "unpin all objects of the master". No help there.

  Is the damaged document or have I missed something?

  I use InDesign CS5 for Mac. worm 7.0.3

  
  Thanks in advance,

  Kurt

  SOP for a file behaves badly is a pants down spanked *.

  * PDS = export to .idml and to reopen the file, and then save them.

• How to specify the master page according to odd or even first page

  We have implemented our books to delete empty pages and we have chapters starting both odd and even pages. In addition, the first pages of our chapters are formatted differently than in the rest of the left and right Master pages. We would like to have two Master pages for the first page of the chapter, one for odd pages and one for the same, so that we can compensate for the margins, leaving more room on the side of the link.

  My question is how do I set up the book so that it generates when, if the chapter starts on an odd page, it automatically applies the master page by odd pages first and when the first page is the same, it applies to the master page by same first pages?

  We have 8 FramMaker and run on Windows XP Professional.

  Thank you

  Tim

  Tim,

  It depends on your book settings. If the next chapter is set to start on a right-hand page, then if the previous chapter ends on an odd page (e.g. law), FM has for add a left page. Book settings always take precedence over the settings of files. You must specify a page available next to the level of the book for all the files (after the first chapter) If you want transitions smoothly with none of the additional pages being inserted. However, you may have a few chapters from the left side, so make sure that you have both a left and right first master page defined and used in your mapping table.

• Limit the number of characters on the Master Page?

  language: php

  Question: In regard to the master page, does anyone know how to limit the number of characters to display only 250 in Dreamweaver CS4?

  That is easily fixed. Use this custom instead of the function:

  function extractChars($text, $chars = 250) {
       if (strlen($text) < $chars) {
            return $text;
       } else {
            $pos = strpos($text, ' ', $chars);
            return substr($text, 0, $pos) . '...';
       }
  }
  

  Put this function definition in your page and use it like this:

  echo extractChars($row_recordsetName['fieldName']);
  

  If the text is less than 250 characters, you will have just the full text. If it is more than 250, you get the shortcut text.

  The function has an optional second argument, which determines the number of characters you want to use as a boundary. So, if you want only the first hundred, follow these steps:

  echo extractChars($row_recordsetName['fieldName'], 100);
  

• Why does not one of this dokument indesign pages follow the position of the master page?

  Why does not one of this dokument indesign pages follow the position of the master page? See photo.

  Use your tool page and drag one to the top.

  

  Or select both and use the alignment icons in the control panel

  

• Final result does not match the Master Page

  I'm so frustrated with Muse right now I could scream. I'm creating a simple landing page, a single page, where what little information it is (a graphic background, logo and contact information) is the master. I want to just publish a page that is exactly like the master, but this does not seem possible with Muse. Why is this? What Miss me? If you open the master page and go where the text breaks for mobile display, there is a blue graph that I placed at the bottom to fill in the blanks. Has gone in the final result and the page is excessive in length, I can't change in any way. The master is set to vertical 956px, but the last page is at 1080. There is nothing hidden anywhere on the page or master.

  A zipped file of the site can be found here: Dropbox - AYIN Website.zip

  I would be very grateful for any help anyone could give me, thanks in advance.

  MP

  Hi David,

  Thanks a lot for your answer. However, after consideration and discussion with my client, I think I'll try to rebuild the page from scratch, since it's so simple, see how it works first. I'll get in touch if I'm still having the same problem.

  Kind regards

  MP