Question on a compatible motherboard gpu h8-1500z HP ENVY (angelica2)

I was planning on buying the computer of h8-1500z HP ENVY with the amd fx-8300 processor and at a later stage the upgrade of the power supply and to have bought a radeon hd gpu 7870 tahiti and install both.

I looked towards the top of the motherboard for this computer and I saw that PCIe 2.0 listed as available slots.

looking towards the top of the gpu, I read it as PCIe 3.0... am I right assuming that I would not be able to install this gpu?

I'm not very well informed about this kind of stuff.

Really would like an answer that he will inform of my purchase.

Thank you very much.

Hello

Some manufacturers indicate a 500 Watt power supply and some 600 watts.  I'd go with the Corsair 600 watt PSU.

The THE of 7870 I looked is 10.5 "long, which means that it's going to be a very tight fit.  Measure inside the PC before buying to ensure that the card fits.

Some of the AMD 7870 mailed HIM active UEFI which is good since the h8-1500z is active UEFI. However, review the fair articles below in case you have problems.

HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card   

Most of the version 3 PCI-E cards are retro-compatible with version 2 slots, but check with the manufacturer just to be safe.

Tags: HP Desktops

Similar Questions

  • A question about CUDA compatible GPU

    After 5 years, I have finally updated my computer tot he new i-7 6700 k 4 ghz quad core processor intel, motherboard Asus Maximus VIII and 32 GB ddr4 RAM. Then I was going to upgrade my GPU of my current GTX GeForce NVIDIA 470 (EVGA) and started looking to the bottom of the list with compatible NVIDIA GPU via the official Adobe site. Just looking through the list and check the price on amazon, it seems most of these cards is no longer available and most are sold as used. This makes it confusing and difficult to decide what GPU to get the next. GPU above $500 are out of my price range at that time and I expected to get something decent for about $300. I was hoping I could get help to be able to choose a good GPU which will work with CUDA in the first and will not be too expensive.

    Thank you

    GTX 960 or 970 would be good options.

  • What are the compatible motherboards for Satellite A30 213

    Hello

    This is my first post, I hope someone can help me!

    I have a laptop A30-213, which requires a new main Board.
    Can someone tell me that other models in this series have compatible motherboards?
    I note there are a few on Ebay but no saying specifically A30-213.

    Of course, it would have to take in the envelope for my A30-213 and have connections in the same place.
    Not worth on the processors as I assume that these can be swapped?

    Thanks in advance!

    Keith

    Hello

    You can only use a motherboard which has been designed and produced specially for a series of A30.
    You can use the Board designed for Equium/Satellite A30 / Pro A30.

    New Board of Directors can be ordered on an ASP in your country, but the new boards a not cheap. You know

  • Need a list of compatible motherboards for Satellite P205-S7476

    My laptop:
    P205-s7476.
    part No. pspb3u-02t00L
    Series No. 97197588 k

    MoBo k000056710 wk737K

    I'm looking for a list of compatible motherboards. K000051440 will fit?

    Thank you.

    Hello

    Satellite P205-S7476 belongs to the series of PSPB3U and generally all motherboards published for this series must be compatible with your model of laptop.

    The motherboard part number: k000051440 is compatible with Satellite P200 / P205 / X 205 series and I guess it should be compatible.

  • Packard Bell Easynote TK81 compatible motherboards

    Hi, I need compatible motherboard for Easynote TK81 - PEW96. I burned by the way the videochip and now we cannot find compatible motherboard. CPU is MAD Athlon II P360. Can you tell me MB compatible for this model of videochip? Thank you.

    Here are a few:

    http://www.eBay.com/Sch/i.html?_odkw=&_osacat=1244&_FROM=R40&_trksid=p2045573.M570.L1313&_nkw=Easyno...

  • Compatible motherboards for Satellite C855

    Hello

    I own a Toshiba Satellite C855 - 12K, I've owned for about 3 years, but 2 weeks ago I accidentally damaged the motherboard, while I was cleaning the computer, at first I thought it was the map screen or video that is broken, because it was weird (cutting, 20 seconds after loading desktop, colorful pixel, thin lines across the entire screen) but after 5 times of commissioning , disabling display, I left alone.
    The next day it would not start at all, so I sent it to a really good computer technician, who called me the next day, saying that the motherboard is dead, and that he needs a new.

    When I was cleaning it, I watched a video on youtube, which shows how to open Toshiba Satellite C855-12J or something, (not the C855 - 12K, I) but I noticed that the chassis is the same, the size of the motherboard is the same. That's why I'd love to not put a motherboard C855 - 12K in my C855 - 12K, but something more powerful, with more performance, because I want to play newer games, but I don't want to sell my C855 and buy a new computer, I would upgrade this computer instead.

    So, there are motherboards for C855, who have a better CPU / GPU that C855 - 12 K, if there are, could you show me a list of computers that come with them? Maybe there are motherboards from other computers Toshiba, that match?

    Thanks in advance.

    Because of the design specific notebooks are specific products and, in general, some radical physical upgrades are not possible. Each hardware platform has some cooling system designed for optimal to protect equipment.

    Each laptop model also has specific design and different ports placed at different locations.
    For example, Satellite C855 was offered with 6 different hardware platforms. With other words, with 6 different motherboards that may have different hardware (CPU, GPU, WLAN, BT) but also other ports on the left and right.

    Each authorized Toshiba, but also independent repair shops for laptop, will exchange defective motherboard with the same motherboard model. Some little compatible mothers are not available.

    Motherboard is very expensive, so you need to check the price and see if it's worth paying a lot of money to get it repaired. Four years ago my A300 was electro shock by connecting the external USB device. The repair was extremely expensive, so I sold it on eBay for spares and bought again a Satellite P500.

  • Compatible motherboards for a Satellite 1800

    My motherboard is out and I'm looking to replace it. Anyone know if it is posible, and what are some other compatible cards puts. I bought a CPU but it's a small pin 478 in the 1800s is a big... I want a Board that will work with the new processor, I bought. I don't know if its possible or not...
    Thanks for any help!

    Scott

    Joey is quite right. Notebook design hardware doesn t allow such flexibility as on desktop computers. Motherboards are designed for each laptop model, because on each unit, ports are placed on different place and you cannot change the position.

    If you want my answer to your question, if it of possible or not, I say no.

  • Acer aspire 5741G compatible motherboards

    Hello to the community.

    I have an Acer aspire 5741g problem on VGA.

    After years, it does not start and I have a black screen.

    It is a topic that is discussed with several solution drivres and updates to the bios, but I think that my VGA (ATI mobility) put an end to his life...

    so the question is what are the compatible motherbords for my case (5741G) and my processor (intel i3).

    I find that there is a phone for 5742G but I can't find if is it compatible and what is the difference between them.

    Thanks in advance

    Nick

    Hello Nick,

    1. tried to connect an external monitor or LCD TV (60 Hz refresh rate)?

    2 - the motherboard with the Aspire 5741 G reference numbers (in character fat, it's graphics memory):

    MO. PSZ02.001BD OF THE HAND. AS5741G. HM55. 512 MB. LF
    MO. PTD02.001BD OF THE HAND. AS5741G. HM55. 1 GB. LF

    3. you can find the exact model like this (example MB. PT401.001):

  • Satellite 5200 801: we compatible motherboard for a European series

    Hello.

    I have a satellite 5200 - 801.The thing is that my graphics card is broken and his one with my mobo so I need to change my motherboard.

    I got a new mobo for the American market.
    do you know if it will be compatible with my European model?

    Thx a lot!

    Hello

    The 5205 Satellite which is designed for the U.S. market looks a lot like the 5200 satellite which is designed for countries in the EMEA region.

    I m not 100% sure but I believe the motherboard must be compatible

    Best regards

  • What are the compatible motherboards for the Presario 6350US

    Hello

    What should I look for to determine if a replacement motherboard will be compatible with my Compaq Presario 6350US?

    Thank you in advance.

    I don't know how you feel about EBay, but here are some to choose: http://www.ebay.com/sch/i.html?_trksid=p2050601.m570.l1313&_nkw=P4G533-LA+&_sacat=0&_from=R40

    Assuming that the drive and the software is OK, just install the motherboard and run it.  He can complain, but for XP, I think it would still work OK.

  • Satellite P25-S520: disc replacement question - who is compatible?

    I have a laptop computer P25-S520 and am looking for a dvd for her writer.

    I replaced the K12D (Pioneer) with the DW-P50A HP but now I'm looking for something else.
    However, I searched in MANY places, but I can't find another suitable writer (dvd).

    Please help me with this (I want to chose a 'list' of :).)

    Thank you very much.

    Hello

    Sometimes you can find that information on the compatible readers in the user manual.
    Maybe you will find some info.
    But generally, all devices and compatible readers, you can order from the Toshiba service partner in your country.
    It is important that you go buy a car with a csel/slave/master settings right because if the disc has wrong settings of the BIOS will not recognize the device.
    I would recommend to contact the ASP and control player of these guys right here.

    On the Toshiba site, you will find the database with all of the ASP s worldwide

  • question of compatibility card motherboard and CPU E430

    Hello, thinkpadians colleagues.

    I have search the forums for something similar, but had no luck. I bought an e430 from a friend that she needed money, and it came with the Sandy bridge 3254h4p HM77 motherboard and an i3 2330 m processor. I am not very well informed about the compatibility of motherboards and processors, so here:

    Am I completely reserved for the processor sandy bridge or can I try an Ivy such as the 3210 m i5 bridge provided with later versions of the thinkpad? I am aware that it came with a different motherboard and architectures, but the issue remains as I said it is possible to upgrade from different generations, as long as the motherboard supports.

    Assuming that I'm stuck with the bridges of sand, I'd be able to install a bridge tdp processor sand 45 (I have the i7 2670qm in mind) or am I also pasted with tdp 35 options?

    Thank you in advance.

    I was wrong; the HM77 should work with an Ivy Bridge.

    You can always meet problems of heat with a chip of 45W at full load.

  • question about my computer motherboard laptop dv6-7213nr of HP ENVY

    Hello all I'm new here but I have been using computers laptops hp for the years and love

    anyway I was doing research on my motherboard for laptop and I came across something interesting, but it confuses me also from what I can tell that the CPU is soldered to the Commission which sucks I wish I put the cpu to an a10 to make quick lol

    But what caught my attention is there are a grip also on the card that says cpu2 beside it, can someone explain this than her for please

    Thank you

    I need a picture. The CPU on a dv6-7000 is not welded to the card. This is the reference number of the Council:

    682180 501

    Here are the Board of Directors:

    Where the CPU2? The big white thing holds the CPU and you could install this:

    AMD A10 - 4600M 3.20 GHz processor (FSB 1600 MHz, 4: 0 - MB L2 cache, DDR3,
    quadruple - heart, 35 W) 683046-001

  • Difficult question - upgrade of the motherboard ASUS P5LP processors - THE

    I have a HP desktop with the motherboard ASUS P5LP - THE. I would like to ask a series of Core 2 Duo E7500 processor in this computer, however the features HP say max supported is a 6xxx series. The E7500 will work with this motherboard? E6xxx processors are becoming hard to find. Thank you!

    Hi, based on yourproduct m7480n pag, actually have the motherboard ofEmer .  :

    Just to be sure, you can have a quick came on the back of the machine.  Emery has a great to come on back pink parallel port, whileAli Seid has a blue VGA port instead

    There is aBIOS updateavailable for the m7480n, if you still do not have xp, but he said nothing about having updated the code micro for newer processors.  Looks like are your options of processor for the Emery

    • Pentium D 800 series basis until 3.2 GH Smithfield
  • COMPATIBLE WIFI ADAPTER FOR laptop HP ENVY 17-j057cl Leap Motion SE

    Greetings! Recently, I bought the laptop the subject, but problems of wireless connectivity to the apartment complex where I live. Given that the card in the laptop (Intel Centrino Wireless N2230) is the only band at 2.4 gHz and I am faced with a multitude of other users, connectivity suffers greatly. Channel change has nothing as other users are evenly distributed between the channels. The only salvation that I might have is to be able to jump to 5 GHz. As my current card can not read the 5 GHz, I wonder if I can replace the card with Intel Dual Band Wireless-AC 3160. If I am not mistaken, this module is compatible with my laptop according to the maintenance and Service of Guide. If my assumption is wrong, what are my options so that I can enjoy (hopefully) connection of 5 GHz? I use a double router broadband Linksys E4200.

    Thank you in advance for your help!

    Papa1145 wrote:

    Greetings! Recently, I bought the laptop the subject, but problems of wireless connectivity to the apartment complex where I live. Given that the card in the laptop (Intel Centrino Wireless N2230) is the only band at 2.4 gHz and I am faced with a multitude of other users, connectivity suffers greatly. Channel change has nothing as other users are evenly distributed between the channels. The only salvation that I might have is to be able to jump to 5 GHz. As my current card can not read the 5 GHz, I wonder if I can replace the card with Intel Dual Band Wireless-AC 3160. If I am not mistaken, this module is compatible with my laptop according to the maintenance and Service of Guide. If my assumption is wrong, what are my options so that I can enjoy (hopefully) connection of 5 GHz? I use a double router broadband Linksys E4200.

    Thank you in advance for your help!

    Hello

    I would recommend 6235 Intel or 7260AC instead of the 3160. These chips are not listed in the manual, but should work on the laptop as the allow list is no longer there.

Maybe you are looking for

  • updated my ipod nano now nano touch screen unresponsive

    updated my ipod nano now nano touch screen unresponsive

  • Lock iPad

    I bought a second iPad, how Apple (iPad) ID is locked and do not access the owner (Reset iPad), I've got MEID and all device infoThanks for the help

  • EHCI USB 2.0 for windows XP drivers?

    I just bought a LG Portable Super Multidrive and it says that I need the driver for USb 2.0 can use it. I searched the entire site and couldn't ' find anything. It's a LG GPO8 Lite if that helps any. Help, please!

  • Impossible to install free Windows 10

    I have windows 7 and July I got 10 free windows download.  I was not able to download it.  I get an error: Windows 10 could not be installed. failure: 1 update Error (s) found: C1900101-40017 Windows Update encountered an unknown error. Can someone t

  • Have two problems

    recently illustratior CS6 for windowsthe problem is that I see not the pathfinder or the point on the corner of each shap around her do ://can anyone help? Thank you