Have two problems

Similar Questions

• I have two problems: 1) a theme that does not change the look of my Firefox at all 2) there is no button 'disable' for my themes only 'delete '. Help, please!

  Okay, so my problems are...
  (1) I downloaded a theme for the first time and when I did, it worked perfectly fine. After updating, I download the theme again and it helped, but the theme will not change the look of my browser. When I tried one of the relevant articles, I cleared my cookies and cache and downloaded the theme (A Blue Fox), installed and turned on, and it worked perfectly fine! I tried to upload another (Pink Fox), one installed and activated, but it did not work. Instead, he returned to the default theme. So I tried to clear my cache and cookies again and repeat the process, but now after downloading, it says "error".... "I don't know if it says"Error Downloading"or"installation error ". Now, I tried to download it again after turning off my computer and turn it back on again, but (today), the two has not applied to my browser. They both had the same look... by default! Please tell me what is the problem!
  (2) in my "Add-ons Manager" page, on the appearance tab, there is no button disable for my modules. Only the "delete" button is present.

  Please help me!

  NOTE: I already tried to reset Firefox, but it does not solve my problem.

  You do not disable a theme, but you choose another theme if you want to change the theme.
  
  Remove button is for when you no longer want this theme.

  You must select a theme and then close and restart Firefox, if you want to use this theme.

  If this does not work, then you may have a problem with the prefs or something interferes.

  If you don't keep changes after a reboot then see:

  • http://KB.mozillazine.org/Preferences_not_saved

• XP pro have two problems: the system restore will not work and rdpclip seems to work computer

  I had a virus, trogan, stopzilla online to fix the problem after allowing access to my computer, (it's a virus) tried to uninstall this program, finally just disabled and removed from the start menu.

  Now, in the pc Registry mechanic tool the first thing listed is rdpclip as run from my computer.
  Since that time I have been unable to use system restore from windows system.   only restore I access is
  from backups of registry mechanic even if I went and set on system restore after that I checked the settings and discovered that they had been handed over to OFF.
  I used the restore before so I know it worked before the access help online.

  Is the solution just to disable repclip?   I have access to my computer so that I have to allow access by external connection...
  computer programs run more slowly, there is always time to wait before the update when I try to use wp-admin to make changes on my Web site.

  Former title changed, but explains the problem
  XP pro, has had a problem with virus removal program, it turned off because it wouldn't uninstall.  Now when I run Registry mechanic it shows my system being run by rdclip.  I can't use the windows system restore.  Points on the calendar are lit up but do not work.  Can I use mechanic registry to disable the rdclip? in auto start menu?  If so this might restore ability to use the system restore?

  Hello

   
  1. you receive an error message when running the system restore?
  2. which antivirus app do you use?
  3. what happened when you try to uninstall the program?

  4, are service packs installed on your computer?

   

  To uninstall the application:

  Method 1:

  Run the hotfix, restart the computer and try to uninstall

  Problems with programs that cannot be installed or uninstalled.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

   

  Method 2:

  I suggest to keep the computer in a clean boot state and check the status of the issue.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: While perform analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost
   
  To solve the problem of system restore:
  I would sugggest you to go through the link following.
  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP.

  http://support.Microsoft.com/kb/302796

   

• Two problems with my Satellite L50D-B - 17 K

  Hi all

  I have two problems with my new laptop (L50D-B - 17 K). I installed Windows 7 64 bit:

  1 - USB 3.0 ports (right) does not work after the installation of the USB driver available in the Web of Support from Toshiba site.
  An unknown device appears in Device Manager: "other devices - Bus USB controllers.

  Where is the valid driver for USB 2.0 ports?

  -Runs normally - USB 2.0 (left side)

  2. I can't adjust brightness of the display using fn + F2/F3.

  When I press fn + [f2 f3] setting icon appears at the top of the screen but the brightness does not (not more not less), always the same brightness.

  Also, I installed display and keyboard drivers support Web site available at Toshiba.

  Thanks in advance.

  Kind regards
  Jesus.

  Hello

  The USB 3.0 AMD driver is necessary and required to get the USB 3.0 ports to work.
  The driver can be found on the page of the Toshiba UE driver (I assume that you have installed this driver):

  

  To get USB 2.0 ports work, you must install the AMD chipset driver (... it's part of the package of display driver)

  Regarding the brightness function key:
  You must install the VAP (value added package) in order to use the FN keys.
  Of course, the display driver must be installed too (as suggested above)

• I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues.

  I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues. I can navigate only to go up and down with the arrow keys.

  What version of Pages is running on your MBP?

  What version of Mac OS X is running on your MBP?

  The MBP is not iOS running.

• If I have two backups iphone 6s in icloud, would I be able to delete the older without problem?

  If I have two iphone IOS 9.3.1 6s backups in icloud, I would be able to delete the oldest BACKUP without problem?

  Yes.

• I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

  I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

  Thank you.

  Kelly

  Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

• Someone at - it encountered problems with the iPhone 6 if weak reception. the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 to see if that helped. Any advice would be great!

  the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 and on the Verizon network. Any advice would be great! «The phone cut, connects during a call to Conference of someone else in (the phone chooses who to call), it basically starts random on the phone stock selection as if someone is trying to use it.»  It puts not only calls on mute.  The keyboard for contacts has been absent for a while, but is now back. "That's what they live. We tried to reset hard phones, the last option that we have not yet tried is wipe it off and start over, but I don't see that as a solution, since one is nine and the other is about 6 months with the same problems accurate.

  Hello FergusonChris,

  Thank you for using communities of Apple Support.

  I understand that your business has iPhones whose screens are behaving erratically.  Given your description of the issue, it seems that the screen may be dirty or there is the screen protector/case that interferes with the screen.  To further support this issue, please see the link below.

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  Take care.

• What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  Hi DaddyJeff,

  1. don't you make changes before the show?
  2. are you referring to the cursor in the area of user password on the login screen of Windows?
  3. when the cursor goes missing, the mouse pointer works on screen?

  It is difficult to say what is causing this problem. If the mouse pointer freezes or stops working, then we recommend you to reinstall the mouse. To do this, try the following steps:
  a. sign in to Windows.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of objects, expand mice and other pointing devices.
  d. right click on the sub element and click on uninstall.
  e. unplug the mouse and plug it back.
  f. the Device Manager, select an item in the list, click the Action menu, click scan for hardware changes.
  g. check if the mouse is detected, if so, then install it.

  See mouse USB which is connected to a USB 2.0 hub is not detected by Windows XP

  
  Note: if the problem persists, restore the computer to an earlier time. See How to restore Windows XP to a previous state

  Visit our Microsoft answers feedback Forum and let us know what you think.

• have two different computers and have problems recoving from hybernation. Locking the system

  Original title: recovery of hybernation

  I have two different computers MS 7 and have all two issues recoving from hybernation. They lock just straight up (do not accept an entry mouse or keyboard) and requir3e hard re boot. Goes 8 to 10 times a week.

  Hello

  (1) did you of recent changes to the computer before the show?

  (2) is the specific question at the opening of specific applications or programs?

  (3) you get an error message?

  You can perform the following methods and check if it helps.

  Method 1: Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286

  2 the resolution of the problems of method Performance

  Run the troubleshooter of performance, then check if it helps.

  Check out the link: http://windows.microsoft.com/en-US/windows7/Open-the-Performance-troubleshooter

  Method3:How to troubleshoot performance problems with sleep, hibernation and resume:

  http://support.Microsoft.com/kb/950686

  Note: The article remains valid for Windows 7 also if it is for Vista.

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 4: update video drivers card

  Check if the video card drivers are up to date. Install the latest video card drivers for Windows 7 on the manufacturer's Web site.

  Tips for solving common driver problems:

   http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  It will be useful.

• Script that current subtract page number two AND export two separate PDF files you have a problem

  Hello

  OBS: The InDesign CS3 script!

  Ronald63 and Laubender helped me with this script:

  // Number to decrement:
  var nDecrement = 2;
  
  // pageNumberStart for a section is only valid, when continueNumbering is set to false
  app.documents[0].sections[0].continueNumbering = false;
  var myCurrentNumber = app.documents[0].sections[0].pageNumberStart;
  
  if(myCurrentNumber>nDecrement+1)
  {
      app.documents[0].sections[0].pageNumberStart = myCurrentNumber - nDecrement
  };
  
  var doc = app.activeDocument; 
  var _PDFExportPreset = app.pdfExportPresets.item('MyDocumentProfile');
  var _DocName = doc.name.replace(/\.indd/, ""); 
  var _EndNumber = parseInt(_DocName.match(/\d{3}$/),10); /* extract end number */
  /* test if is a number */
  if (isNaN(_EndNumber)){
      alert('End document name is not a number');
      exit();
  }
  
  for(i = 0; i < doc.pages.length; i++){ 
      _PageName = doc.pages.item(i).name; 
      app.pdfExportPreferences.pageRange = _PageName;     
      _NewNumber = _EndNumber + i; /* incresase number */
      _NewNumber = ("00"+_NewNumber).slice(-3); /* padding */
      _DocName = _DocName.replace(/\d{3}$/,_NewNumber); /* replace number in doc name */
      _PDFfile = new File('\\\\testserver\\'.concat(_DocName,'.pdf'));
      doc.exportFile(ExportFormat.pdfType, _PDFfile, false, _PDFExportPreset);
  }
  

  He has a problem when I have two pages with a container framework that cross the two pages:

  

  When I run the script, I get this result:

  

  An empty page and the frame with the content is on the other page outside the PB.

  If I delete this part of the script:

  // Number to decrement:
  var nDecrement = 2;
  
  // pageNumberStart for a section is only valid, when continueNumbering is set to false
  app.documents[0].sections[0].continueNumbering = false;
  var myCurrentNumber = app.documents[0].sections[0].pageNumberStart;
  
  if(myCurrentNumber>nDecrement+1)
  {
      app.documents[0].sections[0].pageNumberStart = myCurrentNumber - nDecrement
  };
  

  Then it works very well

  What Miss me?

  Hello

  Add: located in front of the pages in the document preferences

  Try this...

  var doc = app.activeDocument;
  // Number to decrement:
  var nDecrement = 2;
  // set facingPages
  doc.documentPreferences.facingPages = true;
  // pageNumberStart for a section is only valid, when continueNumbering is set to false
  doc.sections[0].continueNumbering = false;
  var myCurrentNumber = doc.sections[0].pageNumberStart;
  
  if(myCurrentNumber>nDecrement+1){
      doc.sections[0].pageNumberStart = myCurrentNumber - nDecrement;
  }
  
  var _PDFExportPreset = app.pdfExportPresets.item('MyDocumentProfile');
  var _DocName = doc.name.replace(/\.indd/, "");
  var _EndNumber = parseInt(_DocName.match(/\d{3}$/),10); /* extract end number */
  /* test if is a number */
  if (isNaN(_EndNumber)){
      alert('End document name is not a number');
      exit();
  }
  
  for(i = 0; i < doc.pages.length; i++){
      _PageName = doc.pages.item(i).name;
      app.pdfExportPreferences.pageRange = _PageName;
      _NewNumber = _EndNumber + i; /* incresase number */
      _NewNumber = ("00"+_NewNumber).slice(-3); /* padding */
      _DocName = _DocName.replace(/\d{3}$/,_NewNumber); /* replace number in doc name */
      _PDFfile = new File('\\\\testserver\\'.concat(_DocName,'.pdf'));
      doc.exportFile(ExportFormat.pdfType, _PDFfile, false, _PDFExportPreset);
  }
  

• My iPhone 6 loads very slowly and sometimes it takes like two trials for the symbol with the lightning to appear. I think he might have a problem on the port of loading

  My iPhone 6 load very slowly. And sometimes other cables works instantly on my iPhone unlike my sister who has the same phone as me. My sister does not have this problem with our cable. Also the battery becomes low too quickly.

  In the last months, I use as a class a lightning because here in the Philippines, original iPhone cable cables look like $25. My sister also uses the same cable as me but she has no problems

  How to fix this please? Can I go to any apple centre and check my phone to see what happened?

  Hello

  Follow the steps here, including the verification of the charge for debris socket:

  If your iPhone, iPad or iPod touch won't charge - Apple Support

• I have two copies of the Installer.app?

  I have two copies of the Installer.app?  When checking my monitor of activity because of the slowness, I have two applications installer which seem to be hogging cpu and memory.

  Can I safely remove a... do something corrupt that they are constantly running?

  Howdy Celeste Jones,

  Thank you for using communities Support from Apple!

  From your post it seems that you have a few cases of Installer.app running on your Mac.  You have installed previously, and you still see the installers running on your Dock?  If so, simply complete the installation process or to leave the installers.  If not, then let's go and just restart your computer in safe mode and restart normally to see if the problem persists:

  Sierra macOS: start in safe mode

  Take care.

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• I also have a problem of index

  Dear Peter
  I have seen several of your solutions on the problem that a lot of people seem to have with Iwork/pages. Really great that you are helping. I also have a problem with the index and read your solutions (links in your post were not always working), but it is not yet resolved. It would be great if you want to take a look at my situation.

  Here is what happened:

  -J' worked on a pages - drop for two days, which was automatically recorded in iCloud.
  -J' took icloud to my Imac and wanted to open it.

  -It did not open and the message of the index appeared.

  -The size of the file says its 0kb.

  -J' have re done my

  What I did so far after a search online for a while:

  -J' also had two versions (5.6.2) and 4.3 of pages but have deleted the other oldest.

  -L' old version of pages is not in the dock more
  -Disconnected icloud (he contributed with someone else)
  -Tried many times to open the document with text etc. Editor.

  The OS is El Capitan and the work on and Imac.

  In any case great if you want to help.

  Filip

  < post branched out by host >

  The Pages you visit on the dock is only an alias, it is not the actual application.

  Those that you will find in your Applications/iWork file.

  Also do not get rid of the Pages ' 09 because it is the right version. 5 pages is a shadow of the previous version with more than 120 missing features.

  If your iCloud is 0 k Yes it is corrupt, it is empty and Pages 5 files are usually too much fat. I have absolutely no confidence in iCloud and don't use it, especially when it synchronizes bad files, as it does all other files, files of good, I also do not use a 5 Pages except for creation of vector graphics Pages, still, he grinds even Macs most powerful stationary if you increase the number of objects beyond even a moderate number which Pages ' 09 deals with quite happy.

  There are several reasons files 5 Pages can be damaged and not much you can do about it because they have a file completely format the. Your only hope is to go back to a previous Time machine version or assistance of:

  Menu > file > restore

  If this is possible. If it is 0 k I would say there is nothing to come back.

  Sorry, but that of why I don't use Pages 5 and suggest to users that it is not suitable for work you care about. Apple has shown no concern for the work of the user, as evidenced by repeated formats of files, changes that several damaged files of users without warning. Apple has lately dumbed down their software while claiming significant improvements.

  Applications exist to serve you, not the other way around. Choose wisely based on what they can do, future reliability and they come from a developer who sees you and your valuable work.

  I'm sorry that I can't work miracles. All I can do is warn users, even after almost 3 years, you use 5 Pages at your own risk.

  Peter