Question on HDMI & USB hub port

Similar Questions

• USB HUB/Port

  Have Dell Inspiron 6000 laptop, Intel Petium (R), MProcessor 1, 6 GHz, physical memory 256 MB, win XP PRO.
  BIOS: Phoenix ROM BIOS MORE worm: 1.10 A09

  Trying to hang a Lexmark X 1270 All In One Printer for 2 weeks. Have no CD of the printer or the Wins service. (stolen) Got Lexmark cjb1200EN.exe, (USB cable) installed, ran, but I get regarding the installation of the software. The USB box continue does not illuminate. I searched and searched the Internet for answers/help etc...

  Click on system, then Device Manager,

                                
  USB controllers

   

  Intel (r) 82801FB/FBM USB Universal Host Controller - 2658 PCI VEN_8086 & DEV_2658 & SUBSYS_01881028 & REV_03\3 & 61AAA01 & 0 & E8

  Intel (r) 82801FB/FBM USB Universal Host Controller - 2659 PCI VEN_8086 & DEV_2659 & SUBSYS_01881028 & REV_03\3 & 61AAA01 & 0 & E9

  Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a PCI VEN_8086 & DEV_265A & SUBSYS_01881028 & REV_03\3 & 61AAA01 & 0 & EA

  Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b PCI VEN_8086 & DEV_265B & SUBSYS_01881028 & REV_03\3 & 61AAA01 & 0 & EB

  Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C PCI VEN_8086 & DEV_265C & SUBSYS_01881028 & REV_03\3 & 61AAA01 & 0 & EF

  Logitech USB WheelMouse USB\VID_046D & PID_C00C\5 & 7E16FA & 0 & 1

  Logitech USB WheelMouse HID\VID_046D & PID_C00C\6 & EF0EE98 & 0 & 0000

  USB Root Hub USB\ROOT_HUB\4 & 34FFDC66 & 0

  USB Root Hub USB\ROOT_HUB\4 & 150BE945 & 0

  USB Root Hub USB\ROOT_HUB\4 & 6A59CCE & 0

  USB Root Hub USB\ROOT_HUB\4 & 38190979 & 0

  USB Root Hub USB\ROOT_HUB20\4 & 30FD3CA & 0
  
  This also made > plugged in the USB cable between the printer and computer, open the Device Manager
  +? Other devices
  ?! USB hub
  When I unplug the USB cable from the printer to the computer, it goes.

  A ran Driver Detective and it come to this:
                                ALL OUT OF DATE
  * Hard drive.
  * CD/DVD-ROM drivers.
  * IDATA/ATAPI CONTROLLERS > Intel (R) 82801 FBM Ultra ATA Storage.
  * IEE 1394 Bus Host Controllers > host OHCI controller complaint IEDS.
  Network cards > Intel (R) PRO Wireless 2200 BG Network Corp.
  * Peripheral system (2) Intel (R) 82801 PCI Bridge-2448.
  * Bus universal controllers (5) Intel (R) 82801 FB/FBM Universal Host Controller-2658.
  DISCONNECTED DEVICES
                                                         
  3Com Meghertz-589F.

  Belkin F5D5020-PCMCIA network card.
  Digital camera.

  LOCOSTO.

  PCMCIA MTD-0002.

  RTL8187B_WLAN_Adapter.

  Sony DSC.

  USB device.
           
  I have Internet from Time Warner > & cable modem, do not use Intel or Windows to the Internet connection.

  If I reinstalled Wins. XP Pro would take care of what the necessary USB Hub for printer and drivers that I'm missing?

  Because I do not have the CD for XP gains and will not read the CD is possible to get it on the Microsoft Web site?

  HELP Please, what do I not right or isn't is required to repair/install what is missing?

  Thank you, morgan637

  If you have reinstalled win how did you so if you do not have the Windows XP cd?
  Is there a recovery partition, you were supposed to use to create your recovery discs not your Dell?
  Go to the Dell support site and ask for help there, the drivers can be downloaded from Dell

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• Satellite 1900-303 USB port not working - USB hub?

  Hello. Deploy a Satellite 1900-303 with two USB ports. One of the ports stopped working. I guess it's permanently broken. Just browse the site, it seems that the easient of thing to do would be to get a Port Replicator - one of them:

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/individualOptions.do?service=UK&selCategory=4697&o ldCategory = 4697 & OPTION_ID = 95631 & toshibaShop = true & t ab = 1 #1

  I wanted to know is it just to sink my remaining a USB port, so that I get 4 USB ports (and all others)? What USB speed I would get?

  Thank you!

  Rich

  Hello

  As far as I know the unit supports USB 1.1
  So I guess if you are using a USB hub external, USB ports work with USB 1.1 properties.
  Maximum data transfer should be 12 Mbps

• Can I use a USB hub to connect to more of a GPIB-USB-HS USB ports?

  I have an instrument that has a GPIB-USB-HS connected and the USB cable is connected to a USB hub. Can I have multiple computers to connect with USB hub in their respective USB ports? If so, how many computers can I connect using the USB cable?

  I downloaded the latest Driver NI-VISA from the Web site.

  You must first a hub which allows to switch between multiple PCs and PCs as one would at once be connected and in control.

  When you buy this particular type of hub, one of the specifications is how many pc connections there.

• No matter which usb port I use for a usb hub

  I have a compac presario CQ60-215DX notebook and I want to install a usb hub. No matter which usb port I use? would also like to know if it is necessary to remove it to restart my computer"

  Thanks for any help.

  Karen

  The only time you usually get trouble with USB ports is when you mix both USB 3.0 and USB 2.0 devices.

  • For all USB 3.0 is backward compatible, it is simply not the case that all the older devices are USB 3.0 compatible.  If you have a problem with an older device, consider that it may be because it is plugged into a USB 3.0 hub / port.
  • Not all hubs are created equal.  If you try to run some devices high speed (things you plug a hub) on a lower speed (2.0) turntable, they may lose the integrity of the data (Act funny) or refuse to perform certain tasks (depending on the device).  These devices may work best when it is plugged directly into the computer no matter that they are running as the USB 3.0 or USB 2.0.  It is not, therefore, necessarily what port the hub is connected - rather, it could be the hub itself (if you have problems).

  Peripheral USB could better with a reboot - some may not reset at all without rebooting.  A USB hub, one of the simplest types - these are usually plug-and-play.  That's all that is connected to the hub, which could be the determining factor for the restart.  It's Windows - it is always better to restart when things change.

• get this message when attachine printer "power surge on hub port A USB device has exceeded the limits of its hub port power.

  The printer is a Hewlett Packard hp psc 1110, which works perfectly for many years. Now, whenever I connect via the hub port, I get the message above stated in the title. I tried other ports the and even bought a new connection, but with the

  same result. The printer works perfectly when not connected to the laptop either as a copier. Can you advise please.help.

  I just replaced mine, same problem on both xp and win 7, it was the usb key. He wore out I guess. I replaced the printer (mine was also a bit old) and I have no problem now.

  Sometimes, they are just broken...

• Need help to install Belkin Wireless USB 4 - Port Hub (HUB-F5U303)

  I recently got a Belkin Wireless USB hub, but I can't install/configure on my laptop ASUS Windows VISTA Home premium 64-bit.

  Belkin tells me I should have a Windows app, "Wireless USB Manager for Windows Vista", in my windows system tray, but I have not listed.  And Belkin has not all the drivers available for download, as they claim that my Vista PC should already have the necessary software.

  Any help would be appreciated.

  Thank you

  Hello

  You can try to update this link USB drivers:

  http://xpdrivers.com/USB/ASUS/_3_2549.cfm

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  As well, contact Belkin to see if they will release an update specifically for your operating system and a USB port.

  
  Reference: http://www.belkin.com/support/

  Hope the helps of information.

• suddenly stops when the external usb hub is attached

  My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

  Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

  Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

• Satellite A100-998: continue Error Message «Power surge on USB hub»

  Hello world.

  I am the new owner of a Satellite A100 laptop that has a little problem.

  When the laptop goes into mode and the monitor shutsdown, energy saving when I turn on the computer again, I always get an error message will appear in the system tray. The message says: peripheral USB A "Power surge on Hub Port" exceeded the limits of its hub port power. To solve the problem, click this message.

  First of all, I have 4 USB ports, but NONE of them are used. There's nothing attached to the laptop at all.
  Secondly, when I click on the box, I get 5 unknown USB devices shown with the yellow question mark next to them in the list and 3 unused ports, which seem to be ok, with no yellow question mark.

  Why is happening, with no device attached, or even installed on the laptop.

  Your help to solve this problem will be more appreciated.

  Rgds
  Neil.

  Hello, Neil

  What model of laptop you have exactly (A100-xxx)?

• Communication via a USB hub

  I have a pair of FuTek USB210 devices which work perfectly when it is connected directly to the computer, but have significant issues, if I try to plug them into the 10 ports Plugable USB hub.  I have a large number of instruments that I need to connect, and I'm afraid I won't be able to talk to them through the USB hub.  The devices in question come from a number of manufacturers (not all who want to play nice with LabView), but are almost universally using connections series at the exit that I turned to USB somewhere along the line.

  The Center will be a problem?  If so, how can I communicate with other devices via the hub?

  You should not worry.  The pilots were probably written with some DLL that identifies the units, or VISA resource found.  These layers of the Protocol are supported for you and your need not care where the device is connected, only that Windows can detect it (Device Manager is a good starting point)

• HP workstation xw6200 model number: DU937AV - a Front Panel USB HUB added

  Good afternoon

   

  I'm back with a double question this time.
  

   

  (a) my XW6200 in its current configuration offers only two frontal USB 2 ports, the other 6 being located on the rear panel. Would it not possible to add a front panel USB Hub?
  

   

  (b) what about 3 USB ports? What do you think about adding to my machine?
  

   

  Thank you very much for your help.
  

   

  All the best,
  

   

  Boyar
  

  All we hear is an opinion, not a fact.
  All we see is a point of view, not the truth.
  [Marcus Aurelius]

  Hello again from Boyar.

  I think that what you are looking for is on page 166 of & Service Guide the technical reference computer.  Here is a direct link.

  I would like to know if that's what you're looking for.

• U2415, USB HUB does not work as usual?

  Hi all

  Today afternoon I noticed my printer disappeared from my operating system... After some tests, I realized that the question at issue also all other devices that I use to keep connected to the monitor usb hub.

  This morning, I left the PC after turning off the screen by pressing the power button, I use to do when I go for dinner... But usually when I come back in the afternoon and I turn on the monitor, all connected devices are displayed correctly and work as expected (printer included).

  This time, something went wrong. I also suspect that maybe I hit a place hurt when I press the button works stop because I was in a hurry...

  Could I have disabled somehow the hub... What do I do or where I could check it?

  Hope that it is not broken.

  Thanks in advance!

  "turn off the monitor.

  Who did the trick!

  When I restarted my PC after you unplug all devices, I have not turned off the monitor.

  Now, I'm just trying to turn the monitor off and then back on. Finally, I inserted the usbkey and check out of "lsusb".

  Look at!

  # lsusb
  Bus 001 Device 006: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102/2.0 / Flash Drive 2 GB PNY HEMA attached 4 GB Stick
  Bus 001 Device 005: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
  Bus 004 Device 001: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  OK, the monitor hub seems to be indicated as "Texas Instruments, Inc. TUSB8041 4 - Port Hub. And you can also see the USB "datatraveler".

  Seems everything is for the best... In any case, very strange question...

  Thanks a lot for your support!

  Sometimes the solutions are the simplest... :)

• USB HUBs in Windows 7 has stopped working

  All devices connected to a USB 2 HUB worked until today on Windows 7 Pro System.  Uninstall and re install installs the device in the field "Other devices" without a pilot.  When I select Generic USB hub to the installation, it is not recommended.  Installation in any way will result in failure: Code 31.

  Hi John,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What was the reason to uninstall and reinstall the USB hub?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check if that helps.
  Reference:
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems

  If this does not help, then use method 2.

  Method 2:
  I suggest you uninstall and reinstall the USB controllers and check the issue.

  Use Device Manager to uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  To uninstall and reinstall the USB controllers, follow these steps:

  a. Click Start, type Manager of devices in the search box of start and press ENTER.

  b. develop a 'USB Bus controllers'.

  Note: You will need to scroll down to find this point.

  c. right-click on the first controller USB under "In Bus USB controllers" and then click "Uninstall" to remove it.

  d. repeat the above steps for each USB controller that is listed under 'USB Bus controllers'.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  Now, check the USB device to see if it works.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Drive external hard connected via USB hub: icons not showing on desktop

  Hi... on an iMac 2015, using a USB hub 3.0 occasionally to connect an external hard drive (which stores these things as art assets)... but the external hard drive icon does not appear on the desktop... it IS in the sidebar of Finder, though...

  But on the icon the Finder sidebar, the small icon "eject" gray is missing, and the only way to eject is to right click and select "eject" or use the eject button in the Finder toolbar... it's okay...

  But is there a way to display the icon on the desktop, so I can always remember to eject the disks attached?

  (the desktop icon shows normally when connected directly via the USB ports at the rear)

  Thank you.

  Finder-> Preferences-> general, check the appropriate boxes under "show these items on the desktop".

  [My personal choice is them having all checked]