Question on the Watt value for the F10-125

Similar Questions

• Can not find the driver that will support Vista Aero for Qosmio F10-125

  Have updated my F10 Vista but cannot find a driver that will support Aero also I get a message from pilot blocked for toshiba common modules.
  Can someone advise?

  You n t need to install any special drivers to activate the Aero.
  Aero is a part of the Vista! Usually, you can use the Aero by pressing the Windows and TAB key

  But not all computer laptop and material supports Aero!
  On the Microsoft Web site, you will find information on hardware specifications that are needed to use the Aero feature

• F10-125: PAL I (uk) vs PAL B/G (continent)

  I am considering buying a F10-125 in the UK or in Holland, because I spend time in both countries on a regular basis. I noticed that the F10-125 is sometimes indicated with spec PAL/SECAM and other times just as PAL. Given that some sellers say just the machine spec UK can show TV the PAL I have standard (as in the United Kingdom) not PAL-B/G and Secam and other his he can even do NTSC (which I'm sure that this is impossible) I wonder if this is the correct machine for me.

  In other words the PAL machine is suitable for the UK and continental PAL? So can I buy it in Holland or in the UK and can I watch TV on it instead of me in Holland, as well as in London?

  I hope someone out there can shed some light on this...

  Hello

  As far as I know you can watch TV in both countries, but you should first set TV type in the settings of the BIOS to PAL. In Windows media Center, it is possible to change the TV Signal for all regions. I noticed that there are 260 different parts of the world.

  I didn t try to configure my WMC in another country, but in my opinion there is no reason why it shouldn't work in these two countries that you mentioned.

• Differences between F10-100 and F10-125 screens

  Hello
  I just got a Qosmio F10-100.
  I read somewhere that the screen on the F10-125 is XGA and the screen on the F10-100 is not XGA.
  Anyone know if there are different screens for these two models.
  I'm not really sure of what means XGA. Can someone help me?
  Thank you.

  Hi Jeremy

  As far as I know, both of them have 15.4 "(1280 x 800) / / TruBrite Wide XGA TFT, color display."

  If you want to know what is google everywhere WXGA or visit this site http://www.gen-x-pc.com/lcd3.htm

  Good bye

• NULL values for some elements of the XML reading tree

  I am confirming that I interpret correctly all the elements of a custom data XML structure defined by my application (the schema is completely under my control).  Some of the elements in my XML tree are read as NULL values, even if similar items are readind as expected.  I have checked some obvious things like misspelling the names of keys, but have not yet find the problem.  Anyone who has debugged similar questions - what else could cause this?

  Example XML:

  
      1.0.0.0
      1000
      MyAppsName
      
          
              1000
              userDefined
              StructName
          
      
  
  

  And extracted C++ w/comments at the end of each line about what I see (DataManager is my class of CRUD operations):

  In DataManager.hpp:

  QVariant mCustomDataStructsTopLevel;
  QVariantMap mCustomDataStructsTopLevelMap;
  

  In DataManager.cpp:

  mCustomDataStructsTopLevel = mXda.load(Utils::dataFilePath(customDataStructsFileName));  // XmlDataAccess; verified loading w/no errors
  mCustomDataStructsTopLevelMap = mCustomDataStructsTopLevel.toMap();
  
  qDebug() << "appName element value: " << mCustomDataStructsTopLevelMap["appName"]; // Outputs "MyAppsName" as expected
  qDebug() << "lastId element value: " << mCustomDataStructsTopLevelMap["lastId"]; // Outputs null (specifically: QVariant(, ) ) - this is NOT expected
  qDebug() << "appVersion element value: " << mCustomDataStructsTopLevelMap["appVersion"]; // Outputs null (specifically: QVariant(QString, "") )  - this is NOT expected
  

  OK, I got the feeling (and actually hoped) it was a silly mistake of face-palm on my part (compared to a problem of BB10 who had little chance of getting fixed).

  The problem is that I copy the structure of custom data from Starter to my Active dir to my data directory to first install but do not crush him on subsequent launches, as the copy in the data directory is what the user changes and relies on.  I was not a delete and reinstall on each of my iterations, so I wasn't really loading the modified versions of my XML I wanted--just, I was getting a day old stale version which was actually for the items I didn't expect NULL values for nulls.  DOH!

• Permanantly disabling "Install Google Toolbar" and change the default value for future updates

  I use Adobe products for years and, in general, is that Adobe produces some really useful tools for users of computers and productivity.  Thereby, ever time I get notice of an 'Adobe Flash Player' update I have to answer the same questions during the update / install process.  During the installation of the installation application ask if I want to install the toolbar 'Google', and the default value is Yes, then I have to uncheck the box before installation or I receive the software on my system I do not want or do not want.  In addition, towards the end of the update, the installation application provides three options on future updates:

  (1) download and install automatically

  (2) ask before installing

  (3) never install...

  And each installation I have to uncheck the installation of "Google Toolbar" and tell them that Adobe 'ask me... ' "before you download and install future updates.

  Is it possible permanently disable toolbar Google and by default my response to the update download and install question to always be 'Ask Me' first?  Adobe's witnesses crossing the machine during this process, so please do not suggest that it is not possible.  Adobe simply needs to modify the setup package to find these cookies and apply preferences users for the installation process instead of constantly trying to push unwanted applications and choices to the user.

  The displayed offers are based on the OS and the browser used.  If the two of you are essentially correct, for the browsers you use.

  If you opt in background updates, update option = allow Adobe to install updates (recommended), Flash Player will be updated within 24 hours of a new version is released.  If you use several browsers that use different types of Flash Player (for example, IE & Firefox) all drive types are updated within 24 hours of the new versions available.

  If you opt in notification updates, update = option Notify me when updates are available, the update notification generally appears within 7 days of an update is available and it is after that the system was restarted or that you log on/off voltage.   Opting to put up-to-date will launch the browser to a download page to download and install Flash Player.  If you use several browsers that use different types of Flash Player (for example, IE & Firefox) as the type of player who set the notification of update is updated.  The other type of player is not updated.

  Essentially, opting in the background updates will update all types of drive on the system within 24 hours and avoids downloading accidentally offers from third-party vendors.

  Note: there are slight differences for OS X updated behaivour but since you have Windows I described the behavior under Windows.

• [ADF, JDev12.1.3] (How to set values for the attributes 1) to create a file and 2) committing to the database?

  Hallo,

  in my tables and forms (created from VO istances) there are some areas for which, insert and update, I calculate and set the value programmatically when a record is created or updated.

  In some cases, I put the necessary values using the 'CreateWithParams' in the workflow diagram...

  

  In some other ones, I associate an action, a bean, a created button drag-and - drop operation 'CreateWithParams' of the istance VO...

    public String cwpButton_action() {
      BindingContainer bindings = getBindings();
      OperationBinding operationBinding = bindings.getOperationBinding("CreateWithParams");
      // here I calculate and set the needed params
      // ...
      Object result = operationBinding.execute();
      if (!operationBinding.getErrors().isEmpty()) {
        return null;
      }
      return null;
    }
  

  And is ok if I can calculate the values for the attributes before a new record is created.

  But the approach that I have used to define the attributes (for new and updated records) whose value should be caluclated after the user has filled in the fields, before committing to the database?

  Thank you

  Federico

  Federico,

  Let me first tell you that our code is activity masking errors (the cache instead of working on them).

  1. If (! operationBinding.getErrors () .isEmpty ()) {}
  2. Returns a null value.
  3. }
  4. Returns a null value.

  This means that you do not check the errors at all. You must at least print a log with the error message, you receive, if you get one!

  To solve your problem, you override the method prepareForDML() of the entity or entities in question. You can calculate and set the necessary attributes until they get engaged in the doDML(). Do not use doDML() because it is too late in the life cycle.

  Timo

• A question about the insertion of the localTimeStamp returned the value into a timestamp with time zone column

  Hello

  Oracle version: Enterprise Edition Release 12.1.0.1.0 - 64 bit

  OS: CentOS 4.6 X86_64                  

  I have a question about the localTimeStamp function. According to the documentation for this function is
  the same thing as current_TimeStamp except that the returned value does not include the time zone.

  Consider the following example:

  SQL > create table tmptab (colval timestamp with time zone not null);

  Table created.

  SQL > insert into tmptab (colval) values (localTimeStamp);

  1 line of creation.

  SQL > select t1.colval, tmptab from t1;

  COLVAL

  ---------------------------------------------------------------------------

  24 JANUARY 14 09.45.42.253732 H + 01:00

  SQL >

  Why introduce the foregoing did not fail? the data type of the column in my table colval expects a timestamp with time zone

  during each which inserts as I understand (correct me if I'm wrong) is not provided by the localTimeStamp function.

  Could someone kindly tell me what I misunderstood?

  Thanks in advance,

  dariyoosh wrote:

  Hello

  Oracle version: Enterprise Edition Release 12.1.0.1.0 - 64 bit

  OS: CentOS 4.6 X86_64                  

  I have a question about the localTimeStamp function. According to the documentation for this function is
  the same thing as current_TimeStamp except that the returned value does not include the time zone.

  Consider the following example:

  SQL > create table tmptab (colval timestamp with time zone not null);

  Table created.

  SQL > insert into tmptab (colval) values (localTimeStamp);

  1 line of creation.

  SQL > select t1.colval, tmptab from t1;

  COLVAL

  ---------------------------------------------------------------------------

  24 JANUARY 14 09.45.42.253732 H + 01:00

  SQL >

  Why introduce the foregoing did not fail? the data type of the column in my table colval expects a timestamp with time zone

  during each which inserts as I understand (correct me if I'm wrong) is not provided by the localTimeStamp function.

  Could someone kindly tell me what I misunderstood?

  Thanks in advance,

  Then, when you do

  create table t (neck DATE);

  Insert into t (to_date ('1st January 2014', ' mon-dd-yyyy "");)

  Are you surprised that it works? After all a DATE column contains a time component, you do not provide: but he

  works and gives you 00:00:00 as the component "hour".

  Similarly, the timezone component is being developed to automatically with, I think, time zone of your system.

• Need Dinstinct values, not the values for pidm (id) of a cursor

  Hello! I use 11g.  I'm trying to get values distinct pidm in the crusor to ap_rec for inclusion in a couple of tables.  However, I also need the set of values for insertion on another table and do not know how to do this.

  Set serveroutput on;

  game check

  coil ap_credit.txt;

  declare

  The CNT number;

  default varchar2 (6) sbgi_code 'Z00162 ';

  user_id varchar2 (7) default 'BANWORX ';

  number of trit_seq_no;

  number of tram_seq_no;

  number of trcr_seq_no;

  number of trce_seq_no;

  number of credit_hours;

  term_desc varchar2 (12);

  cursor test_scores

  is

  Select sortest_pidm,

  sortest_tesc_code,

  sortest_test_score,

  Sortest_Test_Date,

  (Select Max (A.Stvterm_Code) in Stvterm

  where A.Stvterm_start_Date < = Sortest_Test_Date) STVTERM_CODE;

  (Replace select (B.STVTERM_DESC,'Term ", null") Stvterm b)

  where b.Stvterm_start_Date < = Sortest_Test_Date

  AND B.STVTERM_CODE = (Select Max (A.Stvterm_Code) of Stvterm A

  where A.Stvterm_start_Date < = Sortest_Test_Date)) STVTERM_desc;

  -STVTERM_CODE,

  -STVTERM_DESC,

  -f_sgbstdn_fields(sortest.sortest_pidm,'201380','MAJOR_1')

  SGBSTDN. SGBSTDN_MAJR_CODE_1,

  SGBSTDN. SGBSTDN_MAJR_CODE_CONC_1

  of sortest, SGBSTDN

  where

  sortest_pidm = SGBSTDN.sgbstdn_pidm

  and SGBSTDN. SGBSTDN_TERM_CODE_EFF = (select max (b.SGBSTDN_TERM_CODE_EFF)

  of SGBSTDN b

  where b.SGBSTDN_PIDM = SGBSTDN. SGBSTDN_PIDM)

  and sortest_tesc_code in (select distinct sxvapcred_tesc_code from ttubanr.sxvapcred)

  - and A.STVTERM_CODE = (Select Max (b.Stvterm_Code) From Stvterm B

  (- where b.Stvterm_start_Date < = Sortest_Test_Date)

  and sortest_activity_date > sysdate - & & numdays;

  cursor ap_rec (pidm_in sortest.sortest_pidm%TYPE, tesc_code_in sortest.sortest_tesc_code%TYPE,

  test_score_in sortest.sortest_test_score%TYPE, major_in sgbstdn. SGBSTDN_MAJR_CODE_1% TYPE,

  conc_in SGBSTDN. TYPE OF SGBSTDN_MAJR_CODE_CONC_1%, TERM_IN STVTERM. TYPE OF STVTERM_CODE %, TERM_DESC_IN STVTERM. STVTERM_DESC % TYPE)

  is

  Select pidm_in,

  TERM_IN,

  TERM_DESC_IN,

  SXVAPCRED_TTU_SUBJ_CODE,

  SXVAPCRED_TTU_CRSE_NUM,

  A.SCBCRSE_TITLE,

  When case A.SCBCRSE_CREDIT_HR_LOW > 0

  then A.SCBCRSE_CREDIT_HR_LOW

  of other A.SCBCRSE_CREDIT_HR_HIGH

  end SCBCRSE_CREDIT_HR

  --(select case quand A.SCBCRSE_CREDIT_HR_LOW > 0)

  -then sum (A.SCBCRSE_CREDIT_HR_LOW)

  -of another sum (A.SCBCRSE_CREDIT_HR_HIGH)

  (- end of SCBCRSE A sum_hours) sum_hours

  of ttubanr.sxvapcred, SCBCRSE A

  where

  SXVAPCRED_TTU_SUBJ_CODE = A.SCBCRSE_SUBJ_CODE

  and SXVAPCRED_TTU_CRSE_NUM = A.SCBCRSE_CRSE_NUMB

  and sxvapcred_tesc_code = tesc_code_in

  and test_score_in > = sxvapcred_min_test_score

  and test_score_in < = sxvapcred_max_test_score

  and major_in = SXVAPCRED_MAJR

  and conc_in = SXVAPCRED_CONC

  and A.SCBCRSE_EFF_TERM = (SELECT MAX (B.SCBCRSE_EFF_TERM) FROM SCBCRSE B

  WHERE A.SCBCRSE_CRSE_NUMB = B.SCBCRSE_CRSE_NUMB

  AND A.SCBCRSE_SUBJ_CODE = B.SCBCRSE_SUBJ_CODE)

  -Group of

  -pidm_in,

  -SXVAPCRED_TTU_SUBJ_CODE,

  -SXVAPCRED_TTU_CRSE_NUM,

  -A.SCBCRSE_TITLE,

  -A.SCBCRSE_CREDIT_HR_LOW,

  -A.SCBCRSE_CREDIT_HR_HIGH;

  Union

  Select pidm_in,

  TERM_IN,

  TERM_DESC_IN,

  SXVAPCRED_TTU_SUBJ_CODE,

  SXVAPCRED_TTU_CRSE_NUM,

  A.SCBCRSE_TITLE,

  When case A.SCBCRSE_CREDIT_HR_LOW > 0

  then A.SCBCRSE_CREDIT_HR_LOW

  of other A.SCBCRSE_CREDIT_HR_HIGH

  end SCBCRSE_CREDIT_HR

  of ttubanr.sxvapcred, SCBCRSE A

  where

  SXVAPCRED_TTU_SUBJ_CODE = A.SCBCRSE_SUBJ_CODE

  and SXVAPCRED_TTU_CRSE_NUM = A.SCBCRSE_CRSE_NUMB

  and sxvapcred_tesc_code = tesc_code_in

  and test_score_in > = sxvapcred_min_test_score

  and test_score_in < = sxvapcred_max_test_score

  and major_in = SXVAPCRED_MAJR

  and SXVAPCRED_CONC IS NULL

  and SXVAPCRED_TTU_SUBJ_CODE = A.SCBCRSE_SUBJ_CODE

  and SXVAPCRED_TTU_CRSE_NUM = A.SCBCRSE_CRSE_NUMB

  and A.SCBCRSE_EFF_TERM = (SELECT MAX (B.SCBCRSE_EFF_TERM) FROM SCBCRSE B

  WHERE A.SCBCRSE_CRSE_NUMB = B.SCBCRSE_CRSE_NUMB

  AND A.SCBCRSE_SUBJ_CODE = B.SCBCRSE_SUBJ_CODE)

  Union

  Select pidm_in,

  TERM_IN,

  TERM_DESC_IN,

  SXVAPCRED_TTU_SUBJ_CODE,

  SXVAPCRED_TTU_CRSE_NUM,

  A.SCBCRSE_TITLE,

  When case A.SCBCRSE_CREDIT_HR_LOW > 0

  then A.SCBCRSE_CREDIT_HR_LOW

  of other A.SCBCRSE_CREDIT_HR_HIGH

  end SCBCRSE_CREDIT_HR

  of ttubanr.sxvapcred, SCBCRSE A

  where

  SXVAPCRED_TTU_SUBJ_CODE = A.SCBCRSE_SUBJ_CODE

  and SXVAPCRED_TTU_CRSE_NUM = A.SCBCRSE_CRSE_NUMB

  and sxvapcred_tesc_code = tesc_code_in

  and test_score_in > = sxvapcred_min_test_score

  and test_score_in < = sxvapcred_max_test_score

  and SXVAPCRED_MAJR IS NULL

  and SXVAPCRED_CONC IS NULL

  and SXVAPCRED_TTU_SUBJ_CODE = A.SCBCRSE_SUBJ_CODE

  and SXVAPCRED_TTU_CRSE_NUM = A.SCBCRSE_CRSE_NUMB

  and A.SCBCRSE_EFF_TERM = (SELECT MAX (B.SCBCRSE_EFF_TERM) FROM SCBCRSE B

  WHERE A.SCBCRSE_CRSE_NUMB = B.SCBCRSE_CRSE_NUMB

  AND A.SCBCRSE_SUBJ_CODE = B.SCBCRSE_SUBJ_CODE);

  Hello

  Sorry, I can't say what you want.

  Whenever you have any questions, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.

  If you ask on a DML statement, such as UPDATE, the sample data will be the content of the or the tables before the DML, and the results will be the State of the or the tables changed when it's all over.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

  Is the problem you need to do some things for all lines and other things only once by pidm?

  If so, maybe you should add ROW_NUMBER... PARTITON OF pidm in the query.  What you have to do for the separate pidms, do it when ROW_NUMBER returns 1.

• Problem of setting a value for the hidden item click on the button with processes action or pl/sql dynamic

  Apex 4.1

  Oracle 11g

  I have a page which consists of a main and several sub-regions area.  I have a pl/sql process in after the header SET_DISPLAY(:P400_DISPLAY:='MAIN';))

  Three subregions have a contional show where P400_DISPLAY = STORE.  It works in the hiding of the sub regions.

  Now, I want to change the value P400_DISPLAY to the STORE to show the subregions when I hit a button.

  I tried to create a dynamic action for the click on the Add button, but get the following error:

  The selected button uses a model of 'button' that does not contain the #BUTTON_ID substitution string #.

  I went to the models and found:

  Substitution strings

  Substitution strings are used in sub models to reference the value of the components. This report details use of string substitution for this model.

  Substitution string	Referenced	De	Description
  #LINK #.	Yes	Model	To be used in an attribute "href".
  #JAVASCRIPT #.	NO.		To be used in an "onclick" attribute
  #LABEL #.	Yes	Model	Button label
  #BUTTON_ATTRIBUTES #.	NO.		The attributes button
  #BUTTON_ID #.	NO.		ID generated button will be ID either the static button if defined, or if not will be a generated ID internally in the format 'B ' | [Internal ID of the button.

  I then tried to create a page process, pl/sql,: P400_DISPLAY: = 'STORE '; If the button is pressed.  The action of the button is submit page. However, it does not change the value of P400_DISPLAY and the subregions are hidden.

  Suggestions please on how to fix the template or change the value of P400_DISPLAY?

  The question of the root, it's that, even if you change the value of the element of your page, it is not visible to other areas of the page until it is in the session. Thus, any other action based on the value of the element of your page. the visibility of a control, a report based on the value of the item, etc. will be affected by changing the value of the item page until it has been changed in the session. Even after that, items are stored in the session, then you must do something to influence the revalued value. To see the effect of this, observe that your page will load and assesses the value of the element of your page, it sees which is the "MAIN" and mask areas. However, he didn't reassess after that.

  Then; your choices for this value set at the session are send the page, or use JavaScript to set the value in the session. If you use the latter, you will have to do extra work to make visibility tests be re - run, so, let's stick with the submit method.

  What you did above sounds correct to do this but, there are a lot of decisions, that you might have done that may have caused things to do not occur in the correct order.

  First of all, we will confirm that what I describe above is your problem. From the development environment, load the page, click on the button to change the value and submit. Now, click on the link marked the Session. He is always at HAND? If the answer is "Yes"; That's your problem.

  Let's start with your calculation after the header. You set it to * only * run if the current value of the element of your page is null? If this isn't the case, it's your problem.

  Load the Page-> Item set to 'Hand' by calculation-> click on the button--> Item set to STORE-> Submit-> Page Load-> point by calculating the value 'hand '.

  See the problem?

  Assuming that's not the question, you have created a branch to the same page, right? What is your process for the branch point? Is it * after * Validation, computation etc.? Because if not, you are not changing the value before that didn't get to submit.

  I bet that's the first question, but take a look at these.

  See you soon,.

  -Joe

• Questions about the call for a process of a web site

  Question regarding the appeal process.  I'm new to this part of the technology and I don't know that many would know how it works.  We have a Workbench process that must be called from a remote web site.  The process could take a parameter... That is to say an ID.  The process will then query the database and return a Boolean value to the site and then this site might perform a specific operation.   My question is, are there examples out there that someone could provide which can show how this can be done?  What do I need in my site (I don't know how to configure the buttons create OnSubmit processes and very familiar with javascript, html)?  I think that, somehow, it can be done with SOAP or REST?  Thank you very much in advance for any help.

  You just need a form in HTML with elements (for example textbox - string, file - document etc.) with the same name as the name of the process input parameter and the action attribute of the form must be URL REST of process-oriented.

  For example: for a process(short-lived) having REST URL: Http://localhost: 8080/rest/services/WatchedFolder...  with a parameter in the XML and the document as an output variable, we will use the HTML code below:

  http://localhost: 8080/rest/services/WatchedFolder... method = "post" enctype = "multipart/form-data" >

  Chose a file to send to the process.

  file:

  When you click on submit, the output document would be opened in the browser automatically after submitting the form.

  -Wasil

• Why can I not use hidden or display point only to store the value for insertion?

  Hi, gurus:
  
  I have a question:
  
  I implemented a form with the region of report in a page, the update works OK, but the add function has a problem:
  
  There is a column, offender_ID, which is a foreign key to another table, it must not be null during insertion. However, even I pass the ID of the author of the offence of master page when user click on the button create and he did watch in the form, it must be a text tabled for insert success, why can I not use hidden or display point only to store this value for insert? (If I use hidden or display single element insert will be successful, apex reports I tried to insert a null value for the offender_ID column.)
  
  Thanks in advance.
  
  Sam

  Hello

  There is a column, offender_ID, which is a foreign key to another table, it must not be null during insertion. However, even I pass the ID of the author of the offence of master page when user click on the button create and he did watch in the form, it must be a text tabled for insert success, why can I not use hidden or display point only to store this value for insert? (If I use hidden or display single element insert will be successful, apex reports I tried to insert a null value for the offender_ID column.)

  I think that both hidden and display elements have attributes that can cause problems because of different ways these function elements as the only non-display and feature no hidden items. The only items have a "Save Session State' yes/no 'control'? This can be a problem.

  Would you do that? Do these regular items instead and see if you can get those working. Then, we will try to change the fields back to hidden or display only.

  Howard

  Congratulations. I'm glad you found the solution.

  Published by: Howard (in training) April 11, 2013 10:26

• Default value for the select list of type of form elements

  Hello
  
  I do not work with Apex that mutch, so this may be a simple question... but I still need help.
  I have a form, in this form, I have a question P19_ONTVANGER_ID, this is based on a LOV.
  This LOV is on a table that has a field of username with the value of APP_USER.
  The table looks like:
  ONTVANGER_ID this is the PK and is going to be the return value from the LOV.
  NAME is the display value for the LOV.
  USERID is the column APP_USER.
  
  What users would like to get is that if they create a new record, the default value for the P19_ONTVANGER_ID field is their own ONTVANGER_ID.
  But they must also be able to select another user.
  
  hope there is someone out there that can and will help me.
  
  Kind regards
  
  Rob
  
  APEX 4.0.2 Oracle 10

  Rob-v-M-Gn-Nl wrote:
  Until now, I had, but I need to select the value of the id of the table and the list of selection item appears the corresponding value.

  How can I do this?

  You can select the Type of default value as the body of the PL/SQL function

  and to add something like that

  declare
  v_return number;
  begin
    select your_id
      into v_return
    from your_table
    where some_column = :APP_USER;
   return v_return;
  exception when no_data_found then
   return null;
  end;
  

  http://www.asktheoracle.NET/PLSQL-function.html

• Web site created by Muse. The greats until tweek of today. Web site insists now for open index.html in the tablet. Don't know how product, nor how to change the default value for pc of office/index.html. Would advise. Bob

  Web site created by Muse. The greats until tweek of today. Web site insists now for open index.html in the tablet. Don't know how product, nor how to change the default value for pc of office/index.html. Would advise. Bob

  Hi Bob

  I think that you have found the solution but if still you are facing the question, please give me the url of the site that opens another provision in the tablet.

  Please make sure desktop redirection is checked in the site properties page layout.

  Thank you

  Sanjit

• Questions on the aggregation of data for parents

  Hi guys,.
  
  I have two questions.
  
  One, once I have enter data in the leaf level, values aggregate to their parent except period dimension. The aggregation method is elsewhere, conservation never share type and data type is currency. Should provide the member formula to calculate the value for high level members?
  
  Two, some nonleaf members need their own values. For example, a business in the entity dimension unit has some departments. Apart from the consolidation of departments, the BU needs a budget for itself. But members nonleaf cells are read-only. How to deal with my situation?
  
  Thank you

  You can't, not in a release from the bottom up. You can allot of bu1_ to his brothers and sisters. Or you can use the version of up and down, to parents of input values and allocate up to nonleaf members.

  See you soon,.
  Alp