Question performence and ready to high CPU

Similar Questions

• Oracle documaker 12.4 and 2.7 - high CPU usage IDS

  Hello

  I have the below two questions when we installed the documaker 12,4 and IDS2.7 in AIX server.

  -1st edition: We have updated the forums such as 2 under article DocumentServer of the docserv.xml. Ideally only two instances of documentserver must run max since we did not have the load balancing. But we are able to see 5 instances that are running on the server. Here's the docserv.xml entries.

  < section name = "DocumentServer" version = "2.3" >

  < input name = "StartCommand" > java < / entry >

  < nom d'entrée = « StartArguments » > - Xmx1024m - agentpath:/appshared/dynatrace/agent/agent/lib/libdtagent.so=name=AIG-APPS_IDS_DocucorpServer_auchasepcg202_CIP-QA,server=auchasepcg201.r1-core.r1.aig.net:9998-Ddsimessage.debug=Y-Dmarshaller.output=n-Djava.endorsed.dirs=lib/endorsed -cp lib/DocucorpStartup.jar-Dids.configuration=docserv.xml-Dlogging.configuration=logconf.xml com.docucorp.startup.Startup com.docucorp.ids.DocumentServer < / Entrée >

  < name of entry = "StartDirectory" >. < / Entry >

  < input name = "Instance" > 2 < / entry >

  < input name = "FileWatchTimeMillis" > 10000 < / entry >

  < input name = "FilePurgeTimeSeconds" > 3600 < / entry >

  < input name = "MaxUpTimeSeconds" > 1800 < / entry >

  < input name = "FilePurgeList" > filecache.properties < / entry >

  < section name = "SNMP" >

  < input name = "Enabled" > not < / entry >

  < input name = "MasterAddress" > localhost < / entry >

  < input name = "MasterPort" > 705 < / entry >

  < / section >

  < / section >

  < section name = 'Watchdog' >

  < section name = "Configurations" >

  ["< section name = 'Router' requires="//section[@name='BusinessLogicProcessor']/section[@name='messaging']/section[@name='http "]" > "

  < input name = "StartCommand" > java < / entry >

  < input name = "StartArguments" >-Djava.endorsed.dirs=lib/endorsed lib/DocucorpStartup.jar - Drouter - Xmx1024m - cp - Dids.configuration = docserv.xml - Dlogging.configuration = logconf.xml com.docucorp.startup.Startup com.docucorp.ids.router.IDSRouter < / entry >

  < name of entry = "StartDirectory" >. < / Entry >

  < input name = "ReplyWaitSeconds" > 30 < / entry >

  < input name = "MaxMsgLength" > 4194304 < / entry >

  < input name = "MaxConnectionAttempts" > 2 < / entry >

  < input name = "Address" 127.0.0.1 > < / entry >

  < name of entry = "database" >

  < input name = "enabled" > false < / entry >

  < input name = "class" / >

  < input name = "URL" / >

  < input name = "userid" / >

  < input name = "password" / >

  < name="debug.sql.driver"/ entry >

  < / section >

  < / section >

  < / section >

  < / section >

  -2nd edition: Some instances of document server keep running, and no closure. Here are the problematic process id.

  Process ID: 14155952

  The process id continues to run almost 10 hours and we need to kill this process manually id.

  Process ID: 5636292

  The process id continues to function of the and we need to kill this process manually id.

  According to our docserv.xml, we gave the < input name = "MaxUpTimeSeconds" > 1800 < / input >. So it must recycle every half hour automatically and the process must be killed automatically. Where these processes keep on running and consuming more CPU usage and by creating the javaheap dump files. We found that many threads created by the process ID's

  Help if faced you this scenario before.

  In order to limit maximum number of instances of defined this value in configuration docserv.xml:

  2

          2

  Of course, you must use the number you want, not necessarily 2.

  Others that own, there is not enough information in what you have described. But too many cases started by IDS could potentially cause higher than normal CPU usage. The formula for default instances of max was changed at some point be proportional the number of CPUS in the system and on some occasions, it causes too many to be started. This setting will limit the total number of occurrences.

• High CPU consumption (always between 12 and 30%)

  I am running Firefox 9.0.1 for Mac. Until the upgrade to version 9.0.1 I had no use of high CPU problems... I've now must constantly between 12% and 30% of CPU and up to sometimes use much further than that, which really slows down my Mac to a point where I have to kill Firefox to use other applications.

  I have a new Mac mini with fast CPU and 8 GB of RAM.

  I tried to reinstall and also to disable the 4 Add-ons I have installed. After a new installation and all 4 disabled add-ons, I see exactly the same problem even with one tab open to google.com

  Any help from the community is very much appreciated.

  Thanks in advance...

  I've upgraded to Firefox 10 and this issue is now resolved.

• Is short boot fail reason (error 1000-0146) Office of glitter and high cpu?

  Dell inspiron 6000. Windows xp professional sp 3. Three weeks ago, my computer started loud beep on startup and sparkle of the desktop icons. The touchpad has stopped working for a while, but most of the time which is fixed. I installed malwarebytes' eliminating about four Trojan horses and tried to update all the drivers. I did a restore of the system about 3 times. When I ran a test drive, there was a failed test short boot 1000-0146 error. When my app icons start to Flash my cpu jumps to 100%. Pressing any key usually stopped for a bit. Is this a compatibility issue with my software or the failure of short boot is the cause. Help!

  Hi Nutmeg30,

  • Did you the latest changes on the computer?
  • You have security software installed on the computer?

  Learn more about the test of startup failures see link below on the Dell site and check if it helps.

  Pre Boot System Assessment (PSA) Diagnostics and Error Codes for Dell computers

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_300428&isLegacy=true

  It is possible that some third-party programs installed on the computer is causing the flickering and high CPU utilization issue.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• High CPU usage by "System outages" and missing keystrokes in IE on all new HP laptop 15-r085nd

  I recently bought a HP15-r085nd (Win 8.1 with Bing), and right out of the box, I encountered this problem:

  After the awakening of the mode (usually after the first time to wake from sleep mode, but always after the second time), the process "System outages" has high utilization of the processor, up to 45%. The laptop then responds very, very slow. In addition, in Internet Explorer (but only in Internet Explorer, it seems!) strikes are missing out.

  I tried the following:

  -Implementation of all the updates of Windows, all McAfee updates and all of the updates from HP Assistent. No results.

  -Reinstall all the drivers, no results. Windows system restore: no result. Factory reset the recovery partition: no result. Then implemented all the updates again: no result.

  -J' tried to use Microsoft Xperf to diagnose the problem: it seems wdf0100.sys to blame for the high CPU usage. (In other words, if I have interpreted the results in the right way).

  -J' then did some troubleshooting with Microsoft Support: they asked me to disable all startup items in the Task Manager and disable all non-Microsoft services in msconfig. The result was that the high CPU usage of "System interrupts" occurred less frequently after the first time out of the way 'sleep', but still she always had after the second time to wake off mode 'sleep'. Uninstallation of McAfee seems to have the same effect, by the way.

  -J' then did some troubleshooting with the store were I bought it. They used a pilot program to install newer versions of the drivers. Also, in vain.

  Then they gave me another laptop of the same model (r085nd). It had exactly the same problems. So I think that all laptops of this model have the same problem! Does anyone know of a similar case with a laptop similar?

  -J' then did some troubleshooting with HP support. We have updated the BIOS (F.24), without result. We have made a few updates to additional drivers on the HP site, no results. We wanted to update the graphic driver Intel HD (sp65598), but we couldn't install it, an error message saying: minimum system requirements were not satisfied.

  I hope that the HP support can arrive at a solution (they wanted to deepen this). If so, I'll promise to post it here, because it affects probably other r085nd HP as well.

  In the mean time, I'd appreciate any suggestions, because I'm totally confused now. Someone at - it ideas? I will answer all the answers!

  I was contacted by HP Support again. After a new series of updates which included some updates everything new on the site of HP is solved the problem with high CPU usage by "system outages"!

  We have done several updates, so I know not that exactly solved the problem, but it is those:

  -New firmware BIOS: version F.33 (my bet would be that is the one that solves the problem)

  -New Intel chipset driver: 1.20 (sp69575.exe)

  -New driver Intel HD Graphics: 1.20 (sp69589.exe): 10.18.10.3958 (this one tried earlier, without solving the problem)

  -New driver Realtek card reader: 1.20Ap3 (sp69610.exe)

  I hope this helps other people with the same problem.

  Thanks to the HP Support team for their help with this problem!

  Moreover, the problem of lack of strikes in Internet Explorer (more use of CPU (any reason), the sequences of keys more are not registered!) still exists! I work around this problem by using Google Chrome. Again, I hope that this issue might get resolved as well! I nevertheless marks it as "Resolved" as the main problem is resolved.

• High CPU and disk utilization slows down the response

  Two years, Pavilion dv7 - 2273ca running Windows 7 64-bit; Norton 360; IE8; Thunderbird; Microsoft Office 2007.  Tend to have several windows open at the same time.  For automatic updates

  Almost every day the laptop enters a period of very high CPU usage; often accompanied by high disk usage.  The response time of the laptop is compromised to the point that I often have to stop using it until activity slows.  I try to use the resource monitor, but do not know enough to say if the legitimate operations or something wrong.  Norton frequently shows svchost.exe and iexplore.exe as a heavy user of the CPU.

  Is this a normal behavior?  If not - any advice on how to identify the culprit?

  On the advice of a HP technician, I ran check disk, and then restore the system in August.  end hard drive.  System Restore did not difference in performance.

  Most of the processor have more of the base, there will be a CPU 0 and 1 for the dual core processors. Different colors are different carrots 0 and 1

  If you sort as I proposed that the highest CPU usage will float to the top, you have to watch it when your cpu pork starts to act up.

  The colors of disc are reading and writing, its hard disk is read or write data on the trays.

  A high utilization of the processor or disk can be considered normal at times, but should not go on constantly.and by dragging down the performance of the system

  Lets say you run a video in your browser, the CPU usage rises, running other programs can do the same thing.

  The disk activity can be high at times also, depends on what you do on the PC, but shouldn't be high all the time.

  http://www.TechRepublic.com/blog/window-on-Windows/learn-how-to-use-the-Windows-7-resource-monitor-for-effective-troubleshooting/3139

  http://www.PCWorld.com/article/241677/how_to_use_resource_monitor.html

• High CPU Powerconnect 6224P - envMontask and boxes Req

  Hi all

  A for our Powerconnect switch has very high CPU usage, about 96% average.

  There are only two processes that generate this use: envMonTask and Req boxes each about 46 to 48%

  

  

  As they are followed by process, I don't know what can cause this CPU usage and how to solve this problem,

  I remember recently 10 gigabits is installed when the switch is on and after that nothing has been restarted, would that be the reason?

  Attached the switch configuration:

  ____________________________________________________________________________________

  ! Current configuration:
  ! Description of the system «PowerConnect 6224P, 3.3.7.3, VxWorks 6.5»
  ! 3.3.7.3 system software version
  ! Passage mode is configured as disabled
  !
  Configure
  database of VLAN
  VLAN 999, 4000-4001
  output
  hostname "249_Backup_sw".
  battery
  1 4 Member
  output
  IP 192.168.64.249 255.255.255.0
  default IP gateway - 192.168.64.250
  interface vlan 999
  name "VoIP."
  output
  the interface vlan 4000
  name "VSA".
  output
  the interface vlan 4001
  name "VSphere_Mgt".
  output
  level of 07f86f689c0022bdbccc20f02ea5818c user name 'admin' password encrypted 15
  VLAN, VoIP
  monitor session 1 destination interface 1/g16
  monitor session 1 source interface 1/g7
  session mode 1 monitor
  !
  interface ethernet 1/g7
  switchport mode general
  switchport general allowed vlan add 999 tag
  VLAN 999 voices
  output
  !
  interface ethernet 1/g15
  switchport access vlan 999
  output
  !
  interface ethernet 1/g16
  switchport mode general
  switchport General pvid 999
  switchport general allowed vlan add 999 tag
  output
  !
  interface ethernet 1/g18
  switchport mode trunk
  switchport trunk allowed vlan add 4000-4001
  output
  !
  interface ethernet 1/g19
  switchport mode trunk
  switchport trunk allowed vlan add 4000-4001
  output
  !
  interface ethernet 1/g20
  switchport mode trunk
  switchport trunk allowed vlan add 4000-4001
  output
  !
  interface ethernet 1/g21
  switchport mode trunk
  switchport trunk allowed vlan add 4000-4001
  output
  !
  interface ethernet 1/g22
  switchport mode trunk
  switchport trunk allowed vlan add 4000-4001
  output
  !
  interface ethernet 1/g23
  switchport mode trunk
  switchport trunk allowed vlan add 4000-4001
  output
  !
  interface ethernet 1/g24
  switchport mode trunk
  switchport trunk allowed vlan add 4000-4001
  output
  !
  interface ethernet 1/xg1
  switchport mode general
  switchport general allowed vlan add 999 tag
  output

  ___________________________________________________________________________________

  Duplication of port is configured on a single port

  Thank you for your help

  The rear modules are not designed for the addition with the switch, so even if this is not the cause of this, unplug the switch before you add modules is the recommended method to add. EnvMontask and BoxReq are for surveillance of the fans and the temperature, so adding a module could be the cause. With what is a PoE switch, it could be a device drawing too much power.

  Reloading is probably the best first step to take. In addition, remove the module and update firmware would be the next steps. Is probably not a device connected, but unplug the cables and see if it causes a change in the CPU usage can also be useful.

• Windows Update causes high CPU AND not let me install Windows 10

  Windows 7 update has several issues:

  1 Windows Update Service causes the CPU usage high - CPU usually works 50% or more with a single SVCHOST.exe running.  I click with the right button on the SVCHOST entry in Task Manager-processes and saw all the services that SVCHOST is still running.  One at a time, I stopped and restarted them.  Finally, when I stopped the Windows Update service, the cpu immediately fell to almost nothing.  I rebooted and tested several times, and each time, it was Windows Update service that was causing the high CPU.

  2. Windows 10 Upgrade Advisor says I could upgrade to Windows 10, and get the icon Windows 10 is in the toolbar.  But it has failed to install several times.  Now, after stopping and restarting the service of updating (and I checked, it is started), the window get Windows 10 rises, is empty and goes.

  3. I ran the Update Diagnostic and got 1 error:

  Windows Update error 0 x 80070003(2016-04-04-T-04_56_09P)

  the Details of the Diag Windows Update window said:

  RootCause: RC-DataStore

  Error code: 0 x 80070003

  4. I tried to launch the 'Fixit' for update, but it did nothing.

  5. I tried to update Windows Update WindowsUpdateAgent30 - x 64 .exe Agent,

  but it fails with this message:

  "Windows Update Agent Installer has met a fatal error"

  6. when I try to start Windows Update-check for updates, it displays the dialog box "check for Updates" and activity indicator green runs and runs and runs for more than 10 minutes but nothing happens.  And when I check the view update history, it shows no updates, even though I know that I've run a LOT of updates in recent years.

  7. I thought to reinstall Windows 7.  I went to download from Microsoft, and when repair installation it activated my key it says that it wasn't a retail version, so check with the supplier (in this case HP).  I checked with HP and they said that this machine was is no longer supported.

  8. on the way I've renamed the folder C:\Windows\SoftwareDistribution-Windows SDOLD, force it to create a new (probably why it does not find the old updates).  IT did not help.

  So it seems to me this machine is expandable to 10 Windows (it meets the specifications and the Advisor to update Windows-10 said yes and installed the toolbar).  But something is wrong, probably with Windows Updater, and now nothing will be update or upgrade.  And I can't get a new copy of Windows 7.

  So, any thoughts?  I'm out of ideas.

  All I can say is to ensure that you have the latest Net framework installed manually 4.6.1
  https://www.Microsoft.com/en-US/Download/details.aspx?ID=49982

  And the most recent client update
  https://support.Microsoft.com/en-us/KB/3138612

  Also manually install it kb3136000

  https://support.Microsoft.com/en-us/KB/3136000

• High CPU and lag/freezing until the DVD tray is open

  A very strange thing that happens shortly after I burn or rip a CD.  After the burn/rip is finished and the tray ejects, I remove the CD and close the drawer.  Soon after, the computer's processor runs high 80 to 100% and everthing lags / freezes.  I pop open the drawer of the DVD and everthing goes back to normal.  I discovered this fix after days of troubleshooting.  Whats could be wrong?  Windows 7 64-bit SP1 / Asus U56E / Windows Media Player / installed at the factory of Matshita DVD / Intel Core i5 to 2.3 GHz/6 GB of RAM / thank you.

  Hello

  Have you made changes on the computer before this problem?

  Try the following and see if it helps.

  Method 1:

  Try to clear the list pane button after burning disc and see if it helps.

  
  Method 2:

  Uninstall and reinstall the drivers from CD/DVD drive and check if it helps.

  Update a hardware driver that is not working properly: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Method 3:

  Change user settings for Windows Media files and check.

  Open Media Player > file > library management.
  Select each library (video, music, photos, tv recorded [If you]) and check the paths that it manages, and make sure that it is not too close to the root of the C: drive

  Example: It should be likec:\users\ \Music and c:\users\Public\Music, no c:\users as they will cause the whole directory to re tree - index over and over (when you surf the web, or change files in your profile).

  Reference: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-7-has-high-cpu-usage-and-slow-performance/b5c79a15-781b-455a-9003-6d305695fce0

  It will be useful.

• High CPU after 10.11.3 at 10.11.4 upgrade

  Use El Capitan successfully for several months, 10.11.1 to 10.11.3 migration. However, the upgrade to 10.11.4 led to relatively stable high CPU.

  In particular, I see process launchd (about 75%), UserEventAgent (70%) and mds_stores (30%) CPU consumption at that rate there essentially all the time, the % overall slowed down when do nothig is about 45% - therefore on an end of 2014 retina iMac 27 inches with Fusion drive. Despite this, everything works still with reasonable performance, probably because there is still spare CPU capacity.

  Looking at the Console log, I see a lot of

  29/03/2016 18:17:01.002 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  29/03/2016 18:18:02.001 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  29/03/2016 18:19:03.002 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  29/03/2016 18:20:04.002 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  It's be connected at intervals of a minute or so, although I don't see any referenced messages.

  Removed some of the programs began and eliminated some of the agents launched (I think) and also re-installed from the recovery partition, but the problem is still there.

  Someone at - it watched questions along these lines?

  Would appreciate any suggestions.

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the recovery HD immediately after the chime press keys control and R that the Utility Menu appears. Choose disk utility and click on the button continue. Select the withdrawal (usually Macintosh HD) volume entry of the list to one side.  Click first aid button in the toolbar. Hold the button brings up. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click continue.
  6. Download and install updated Combo OS X El Capitan 10.11.4.

• Satellite A 110 is suspended due to high CPU temperatures

  Hello

  My computer is hung up on me while running certain applications (such as Dreamweaver CS3) or other situations in which work the CPU at maximum performance. I suspect that the reason is high CPU temperatures and indeed download several CPU, monitor applications (like thermal analyst intel) my average CPU temperature is around 61 degrees (Celsius), and before the computer hangs (instantly - just completely stop lose power), it reaches very high and not necessairly after working for a long time.

  My questions:
  1. is this a known problem with this model?
  2. is there anything I can do to limit this problem and avoid data loss?

  Thanks in advance,

  URI

  I think you will need to contact the ASP in your country for assistance.
  In your case maybe the cooling module may not work correctly. Probably the thermal grease that is placed between the CPU and the cooling module must be renewed.

  All these things need to be clarified.
  So call it the ASP.

• DAQmx read results 2 ms/s in high CPU usage

  I have an application that reads the 32 channels of 2 ms/s analog input signals, at the same time. The actual hardware will be: SMU-8135 Win7, chassis SMU-1071, 2 x SMU-6368 (16 channels). The SMU-two 6368 will provide 32 channels data acquisition.

  I don't have the material at the moment, but I've been estimate the processor on the alternative configurations needs, because I have concerns about the use of the CPU to data acquisition high speed. Two alternative configurations are:

  (1) SMU-8133 (quad core) WinXP, SMU-1062 q, PXI-6133.

  (2) PXI-8106 (dual-core) WinXP, PXI-6133, PXI-1042.

  Note: PXI-6133 supports high speed HAVE 2 ms/s, at the same time.

  I wrote a simple continuous data acquisition software to allow me to compare the CPU usage. The sample rate and the number of channels are configurable. What I found is:

  (1) at low sampling frequency, for example 100 kech. / s, the CPU usage is minimal on both configurations (bicoeur or image), regardless of the number of channels is 1 or 8. The reading of the CPU was about 1-4%

  (2) at high sampling frequency, for example 2 ms/s, what is the number of channels used, either 1 or 8, the CPU utilization was 50% for dual core and 25% for the quad core, IE. a full core has been fully utilized.

  (3) the passage of the low use of the processor (<5%) to="" high="" cpu="" usage="" (="">45%) increases when the sampling rate is rather steep and shows interesting channel-dependence (note the following has been achieved with a PXI-8106 controller, dual-core).

  • @1 channel, it happened between 950 to 970 k
  • @2 channels, it happened between 470 to 480 k
  • @4 channels, it happened between 230 to 240 k,.
  • @8 channels, it happened between 120 to 130 k.

  This model reminds me of buffer length related question but I double checked a sufficient length of the buffer was used. He suggested also, surprising a few traffic jams occurred when the amount of data increases up to certain level.

  My question is, is this a problem with this particular card (PXI-6133) or driver DAQmx (9.5.5f4). How the problem is when I'm doing an acquisition of 32 channels?

  For your information, I have attached the benchmarking software.

  Thank you!

  Donghui Yin

  I followed this example code (see link below) and used based on events DAQmx, now the excessive CPU utilization problem has been resolved. Playback from the CPU is now less than 10 percent, while it could be 50% (in the case of dual-core) or 25% (case of hearts) at the same sample rate and number of channels.

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/5911

• Help the flicker of screen HP Elitebook 8460p &amp; question flashes and upgrade.

  Greetings,

  I have a problem with my Elitebook 8460p. My old servant me service for 3 years. We have a good relationship with highes and downs. Changed hard drive, the improved Rams, monthly cleaning and etc.

  In any case; I have a problem with flickers and flashes. When I push the start of (the computer On / Off), some strange black lines appear and never went. The funny part is that the black lines, flashes / flickers become crazy when I touch the touch pad. But if I touched the touchpad of the black lines just less.

  Things I've done;

  Electrical parts Checked - no electric leakage (verified to the ohmmeter)

  I tried to run with AC and battery - nothing has changed.

  I've been handicapped ambient light sensor - nothing has changed.

  I've been disabled touchpad - nothing has changed.

  Formatting, update the BIOS to the latest version of w7 updated, no unknown device, performed stress test CPU GPU & played back & assemble nothing has changed.

  My suspicions;

  CPU because this computer VGA card integrated with CPU. Change CPU, maybe to fix any problems.

  I want to switch my computer to my choice and i7: Intel Core i7 - 2670QM.

  My booking / questions;

  Intel Core i7 - 2670QM CPU is compatible with my Chipset QM67? If it is compatible; What should I do? (Updated the BIOS, or different version of BIOS etc..)

  I have some information on this situation and my laptop.

  

  

  

  Video

  HP Elitebook 8460p series using Hannstar MV6 and my motherboard is same. No VGA. I will not worry the my solution. If I'm wrong; I spend my money for nothing.

  I'm waiting for your answers.

  Thank you.

  Really? No response. Thanx HP.
  I found the answer.

• Windows 7 update - slow download, svchost high CPU usage

  I have a problem downloading by using the Windows Update application. This problem started after January 2016.  In the past, the request of update seems to work without the use of the svchost high CPU and with a reasonable download time.  There is usually a delay until the download has started, but then they ended quickly.

  I have 4 computers: 3 running Windows 7 Pro (CPU - Intel dual, i5 & i7) and 1 running Windows 7 Home (Intel i3).  If the problem is not related to the CPU hardware as best I can tell.

  My update setting is 'check for updates but let me download and install ".

  The Windows Update process includes 3 steps:
  1. identify the important and recommended updates for your computer.
  2. the selection and download updates.
  3. the creation of the restore point and of the installation, the selected updates.

  My problem is step 2, download the selected updates.  This happens on all 4 systems, and I do not expect a download to be this CPU load.  The download time is too long on all systems 4.

  My online search for answers has been frustrating, but several posts said search for viruses, malware and Trojans.  I ran Malwarebytes (free), Windows Defender, Norton Security and ESET (online) on systems and no objects are found.

  My most recent experience involved my Lenovo 7847 system (Intel dual core). Monday, May 23, I checked the updates and there were 15 updates important and 3 optional updates listed.

  After reviewing the updates, I chose the 15 updates and started the download process.  The svchost.exe that is associated with the update happened to 45-60% CPU usage, update status showed no size or % finished and the task manager - network or explore the process did not show any activity download for a long time.

  Finally, after about an hour, the update showed the download size and the % downloaded.  Svchost usage remains high during the time of whole download.  Once the download is complete, the restore point was created and updates have been installed, who also took some time (but it would be I/O CPU & Drive dependent).

  The download status has not changed during most of the time that the download process is running.  The Task Manager and process explore both show very little network activity up to that very near the end of the download procedure. There is therefore no real indication that the process is blocked or just turn very slowly.   It almost seems that the Microsoft servers are overloaded, they delay the download for some reason, or the process svchost and sub-process fail to create good handshake with the server for download.

  My Questions:

  1. Why is svchost usage so high when nothing seems to happen?
  2. Why does take an hour or more to download the updates?  These aren't the huge file sizes, and this attempt to update was almost 2 weeks after Patch Tuesday, then Microsoft servers should not be overloaded.
  3. Why is the situation unchanged for so long during the download process?
  4. most important, what can I do to change this situation?
   
  Thanks in advance for your help.

  My 'update problem' seems to have changed.  Checking updates takes a lot of CPU resources and a lot of time.

  We will leave well enough alone for now. [It took 3-4 hours for MU download/install updates of June on my Win7 boxes].

  But please bookmark this thread. If the behavior persists in July - and especially in August, respond to this thread instead of starting a new. Good luck!

• High CPU in Windows 7 between 80 to 100% usage

  * Original title: help! High utilization of the processor and corrupted files

  I have a Windows 7 computer. I had a very high cpu usage these days. When I run nothing it is between 80 and 100%. I tried to run spybot and malware bytes on normal and clean boot and nothing fixed. I ran SFC/scannow on boot and he says that some corrupt files can be fixed. I also tried a cleaning of windows security program and that did nothing no more. I know things high cpu is idle system, rndll32.exe, mcafeeshield.exe, perfmon.exe svhost.exe, one of these. I tried to follow which one in monitor resource but I could not find the culprit. The computer certainly did not raise cpu mode start minimum btw. I tried to stop some services too such that windows update is stopped and still nothing. Help, please!

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem