question pxi_trig FPGA with multiple cards

Similar Questions

• I can't pay for my photoplans with multiple cards.

  I can't pay for my photoplans with multiple cards.

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• Question about WPA with lan card wireless in a Satellite Pro 6100

  Hello world

  I wish toshiba Australia had a cool site like this... It's fantastic.

  In any case, I just buy a kit (PA3189U-1MPC) wireless lan card for my laptop and network connection problems wireless of the University. The tech guy he says I need to have installed a wpa driver, and then I would be set for the use of bandwidth United.

  Anyone know where I can get a newish driver? I can't find anything anywhere...

  Thanks for any help,

  Jonno

  Hello

  First of all, it is very nice to read you like this forum. ;)

  So my friend from Australia, at first I must say that you use right and compatible WLAN card on your older laptop, but now I have to disappoint you. According to the specification, it is not possible to use WPA encryption with this card.

  Really, I don't think you can solve it with the new driver. I have newer computer Tecra laptop and I've tried everything but to no avail. Best solution for you is to use external USB WLAN stick. It will be much better for you. Initially, you can use WPA encryption and with the new card, you can use faster standard G and download speed will be much faster as with integrated WLAN card.

  Maybe you should think about it.

  Bye and good luck!

• Question - the upgrade with 3 USB card and esata

  I have an early 2008 Mac Pro Quad core 2.67 going to have maxed out RAM soon and are planning to get a couple of 2 TB seagates Macgurus. I'm a little embarrassed by my lack of knowledge, but I'll put my questions over there anyway. Last year, I bought a 120 GB ssd card Accelsior PCIe mercury OWC - not being aware of the s and outs of things, but I knew it wasn't a port multiplier with two external esata ports. so my question is this: since I have to live with this card can I connect the esata ports to discs in separate outdoor pens and then through disk utility make a raid 0 set, and what size of disc must be effective for the cost the least?  I intend to get a USB 3.0 also so that I can use this speed also.  My other plans must be a drive of fusion with the ssd 120 on the map of Accelsior with a disk of 1td existing in my drive for the system Bay and replace all small readers of seagate more big HARD drive and I'm wondering if the 2 TB is the largest capacity I can use internally. I am on a very limited budget so that's the reason why I'm thinking hdd and if there is someone with advice on a card USB 3 I would appreciate your comments - in fact, I would be happy to comment on everything I mentioned, I'm a little out of the loop on the evolution in recent years. It is possible to configure a raid with two disks of two PPI crd esata ports would there be an advantage with drives of 2 TB or 1 TB disks would work as well for raid 0. Do I intend to put in storage for Time Machine with the USB 3 map, and what size disc would be appropriate for Time Machine? I'm not lazy and waiting for someone to find out - I did weeks of research to get to this point and I just need a little advice. I'm just going through what I know and what I can afford, but maybe I'm missing another solution to try to get a little more speed and back up storage for my photoshop files.

  I do only cc2015 Photoshop, Lightroom and On1software version 10.1 using OS X El Capitan and a cg 276 Eizo monitors more a second older Eizo. My usb ports 2 are all used and I rarely use a firewire port. Thanks in advance to all those who have advice. This is the first time that I have not posted anything on this forum

  Time machine is a USB 2 connection. No real reason for a USB 3 connection.

  There is no RAID in disk utility in El Capitan. Apple dropped the disc utility in El Capitan. However, you can still the Terminal commands to configure RAID.

  https://www.reddit.com/r/OSX/comments/3d7aw2/does_el_capitan_disk_utility_suppor t_raid.

  You should be able to create a set with eSata RAID

  Here is a map of the BSE 3 compatible with El Capitan.

  http://www.sonnettech.com/product/allegrousb3pcie4port.html

  USB 3.0 Mac Pro 2008 El Capitan

  Make sure that the card said it works with El Capitan. Some cards USB 3 is no longer with El Capitan as the CalDiget of first generation card.

  Internally the Mac can also use large HD depending on availability. However, there is a bug that first appeared in 10.8.4 and has not yet been set. To format a plu 2.2 to internal HD:

  -Use a disk utility of all Mac OS X older, including the 10.6 DVD (if your Mac can boot from it) or any of the installation DVD player or boost saved work.

  -Another solution is to move this drive in an external case and delete it there (assuming your case is modern enough to deal with readers more than 2.2 to.

  In addition,

  To sled mounting internal:

  The penetration of the screw depth for 'down-screw mount adjacent to the platters' on some readers from over 3 TB have been shortened. This may mean that the live sled down until they adjust and begin to compress the washers on the sled. If this is the case, your drive will not rest flat on the sled and do not breed with the connector backplane without additional adjustment.

• want to 15 t k100 CT0: Question for compatibility with cards Envy 15 - update of the original wireless

  Hi, first of all thank you for the research this post ~!

  I got a craving for my friend last year, and this model use an old card wireless (Atheros AR9485) that is not supported bandwidth of 5G. I'm looking for a replacement that could support 2.4 and 5 G band.

  Model (based on the identification of auto for the HP Web site):

  Envy15t CT0 k100

  Model: G0T59AV

  Series: [personal information]

  Some positions, said there will be compatiablity question if I buy a card at random, so could someone help me with this? Maybe give me a model which can be integrated in this situation?

  HP partsurfer web page below, based on the model of my machine, I found some info, but really not sure whether this is the right one.

  http://PartSurfer.HP.com/search.aspx?SearchText=G0T59AV

  

  Thank you again to finish reading my problem! THX!

  Hello

  From my research, no whitelist more for new HP laptops (manufactured after 2014). Sounds like your machine has only 1 antenna so you can use the second one on the list.

  Kind regards.

• How can I actually talk to support multiple issues with multiple devices (software, hardware, account of the question?

  How can I actually speak to technical support issues to nulitple with multiple devices (software, hardware, account problems,) I have a touch screen of hp with windows 7 Home, Ipod, home router wireless, boost, WiFi, wii, etc.... Problems with windows live net Passport vs msn Id, problems with zune vs itunes and windows media that nobody wants play nice together.

  My touchscreen notes will use only a google account, music another program, and of course until recently google was not an option on the windows phone. of course if I'm going now that I'll lose all the games and music. His tent so frustrating of any help, that nobody seems to know how often these devices and programs interact (or care) HP has been of little use, even for my provider windows, microsoft, living cells and zune etc...

  All the changes that took place this last month will help but gets boring. I consider myself pretty computer savy, but maybe not, should not this difficult. I realized about a year ago I would have hired a technician but it seems immpossible to find someone who knows enough about all of the equipment and software to really do some good. My Hp touchscreen computer does not even play nice with their own HP printers. I really regret the time and money I spent. I could every Mac.

  All of the suggestions. Even your options do not address several problems of interaction with the hardware and software all needs of problems to adapt to a single category.

  Hello

  
  To correct the software issues run the methods mentioned below.
   
  Method 1: run the troubleshooter and check if the problem is resolved.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
  
  Method 2 : run a SFC (System File Checker) scan and see if the problem occurs.
  http://support.Microsoft.com/kb/929833
  
  Method 3 : run Clean boot and check if the problem persists.

  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  http://support.Microsoft.com/kb/929135

  To solve the problems related to Windows Live and MSN to check the links below on contact.

  
  After the question in the links below
  http://support.Microsoft.com/kb/940784
  http://windowslivehelp.com/
   
  To solve the problems related to the HP touch computer
  
  Update the HP touch drivers from the manufacturers Web site.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you need to talk to a Microsoft technician, then you can check the link below http://support.microsoft.com/kb/295539

  
  Hope that helps.

• How to configure a VM with multiple network cards to see Agent?

  How to configure a VM with multiple network cards to see Agent?

  We can archive this requirement by configuring the subnet used view Agent.

  The subnet determines which view address of Network Agent provides the server instance to connect to view for the client protocol connections. The view on VM officer has more than one NIC

  Follow the procedure below:

  on a display Agent installed VM,

  * Recording of VM session.

  * RUN--> type regedit or type regedit.exe at the command prompt

  * Create a registry entry to configure the subnet.

  For example: is HKLM\Software\VMware, Inc. \VMware VDM\Node Manager\subnet = n.n.n.n/m type - REG_SZ.

  In this example, n.n.n.n is the TCP/IP subnet, and m is the number of bits in the subnet mask.

• Photos of virtual machines with multiple disks on different LUNS - Question

  I have some questions on how to manage the snapshots of virtual machines with multiple disks on different LUNS.  First of all, the LUNS are VMFS.  We are just starting to add virtual machines with dedicated for data storage format VMFS LUNS.  I don't think an extra space must be made for snapshots, as well as at least 100 GB LUN is required to store the data, and then say, add about 25 to 50% of this amount?  Set the 100 GB vmdk file but have the GB from 25 to 50 additional disk space for snapshots, if necessary (rather than just to get a unit number logic needed 100 GB of data and devote all of the 100 GB to the vmdk file).  In addition, if a virtual machine has several files vmdk on different LUNS, which will be a problem to take a snapshot, and is it possible to do just a snapshot of a disk of a virtual computer (as the volume of the BONE)?

  Thanks for any help.

  Snapshot files are created in the home folder of the VM by default for all virtual disks, no matter on what data store they are. You must make sure you have enough free disk space on the data store for snapshots.

  If you want to exclude a virtual disks of taking snapshots, you can set it to 'Independent' - 'Persistent' machine virtual settings to the HARD drive.

  André

• Advanced answer Options for multiple choice with multiple answers questions

  Is there a work around to provide feedback to questions multiple choice with multiple responses?

  For example, I am preparing a question with four ansers, B and D are correct. If users chooses only B, then the feedback will be "B is OK, but there is a right answer."

  Hello

  Burst in to give you a link to a post Articles with some articles that I have published on the creation of custom questions. If you do not have to report to an LMS, which will be the way to go to be in total control. You will find perhaps inspiration here:

  Customize your quiz

  I find also included widgets very useful for creating custom question slides. Here is another link:

  Widgets and custom questions - source list

  Lilybiri

• Implement a driver for a card cryptographic chip with multiple ATR

  Hello world
  I use RIM to develop a driver for cryptographic smart card.

  I created the MyCryptoSmartCard class that extends CryptoSmartCard. The problem is that this class allows only an ATR, but my card can have more than one ATR. It costs of the version. I want to control all in one card, and obviously with a single driver.

  So what I need is to make a single conductor for several ATR. Is this possible?

  The structure of my class of smart card is:

  public class mycryptosmartcard extends CryptoSmartCard implements {persistable

  private final static _ATR Byte = {(byte) 0 x 33, (byte) 0x6F,...};

  ...

  public static void libMain (String [] args) {}

  try {}

  SmartCardFactory.addSmartCard (new M3CryptoSmartCard ());

  } catch (ControlledAccessException falls) {...}

  ...

  These are the only solutions tha I thought, but I don't know if it's possible:
  -Make a MyCryptoSmartCard of constructor passing the RTA and the pourla create with ATR one or the other.
  -Put all the ATR as private variables and later to treat each case current.

  Could someone give me a solution? I would avoid the possibility of a driver for each RTA.

  Thank you very much.

  Hi, I think that it is theoretically possible to write a single driver for your two cards. In practice, it may be more difficult that it sounds good, depending on how different the two cards are actually.

  The class CryptoSmartCard * can * support more than one ATR... once again, at least in theory. "To support a given RTA" means that your class return true from the checkAnswerToResetImpl method. So I don't see why your implementation of this method should not return true in response to one of the two separate ATR responding with your cards.

  Having returned the true value, your driver actually expressed as a candidate for the card driver currently in the drive. After that, you will need to ensure that your pilot tunes its behavior to the requirements of the current map. You need to maintain an accessible indicator which ATR has received that is facing types two cards are in the player, but I think that a class variable should be able to do it for you.

  You cannot use a special constructor because your class is built in libMain before the call to checkAnswerToResetImpl. Then you probably just need to condition the behaviour of your other methods on the ATR which has been received and encoded as your class variable (i.e. use if or statements to pass).

  Hope this helps

• 7953 FPGA with 6581 adapter world clock inputs

  I am very new to FPGA with LabVIEW design. I have a FPGA 7953 card that connects to the 6581 adapter. This brochure, looking the 6581.

  ( http://www.ni.com/pdf/products/us/cat_ni6581.pdf )

  on page 3, it says "Note: clock is connected to the world clock for the NI FlexRIO FPGA module entries. I think it means that DDCA, 67 of the 6581 pin, I can feed an external clock in which is accessible in my LabVIEW FPGA code to entries world clock of the 7953? I don't know what these entries world clock would be on the 7953. It would be one of the choices presented to me as shown in the attached picture?

  Sorry if this question is wacky...

  Hi JHaas,

  I think that I can't fully responding to your question.  Yes, you can introduce an external clock in the 6581, which is accessible in your FPGA code.  Take a look at this knowledge base article which has some more details on the pins to use, and how to use the clock in a timed cycle loop.

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Display problems when you run applications JavaFX 2.0 with multiple monitors

  I noticed a number of issues when running JavaFX 2.X applications on a system with multiple monitors. My setup consists of 2 monitors (primary and secondary on a dual graphics card) and my third on a separate graphics card.
  
  The questions I have observed are,
  
  (1) the application is not too sensitive when running on the second or third monitor.
  
  (2) when the application runs on 2 monitors and re-tire it will only redraw correctly on one of the monitors. The application will be displayed as a black box on the another moniter
  
  (3) where the application does not run on the primary monitor and a ChoiceBox is selected choice appears as expected but it blackens the application in the background.
  
  Someone else encountered similar problems? I'm going to raise a JIRA with screenshots and details of my system if other people are able to confirm that they are also suffering from similar problems.

  Hi, I had similar problems. My application uses 2 monitors and now everything works just perfect. It turned out that the interface is causing these disorders. I changed mine, then he worked (actually more the new installed I also had to update the driver for the new interface)

• Satellite A500-1GL: 2 questions: the fan speed & graphic card driver failures

  Hello

  I have 2 questions, hopefully someone can help me with that.

  * The first question - quick fan *.

  I'm on online gamer second life and world of the craft of war) recently my fan speed crank up to 90 percent for about 5/10 minutes before leaving quiet. Then speed up again after a period of time. I'm confused as to why he did this because when I check my cpu temp is only make 40%, and I use a cool buffer table.

  I'm looking for some advise here because all said Toshiba was making sure I had the latest bios update. But I would have thought it is not the processor overheating the fan must not be crank that quickly. My laptop is only 2 months old.

  Can anyone help, should I be worried?

  * Second question - graphics driver *.

  Also on a couple of times I got my screen briefly go black and then recover. A pop up appears saying something along the lines of the core of the graphics card.... Driver recovered. It flashes if fast, that I never see the entire message. Don't you think that something is wrong with the graphics card? (card nividia geforce gt300m)

  I really hope that someone can offer more help that Toshiba has done, as I am a bit unhappy to be problems on a 2 month old laptop.

  Thank you for reading and I look forward to any Advisor.

  (> I'm on online gamer second life and world of the craft of war) recently my fan speed crank up to 90 percent for about 5/10 minutes before leaving quiet. Then speed up again after a period of time. I'm confused as to why he did this because when I check my cpu temp is only make 40%, and I use a cool buffer table.
  > I'm looking for some advice here because all said Toshiba was making sure I had the latest bios update. But I would have thought it is not the processor overheating the fan must not be crank that quickly. My laptop is only 2 months old.

  The cooling fan is controlled by the fan table in the BIOS. Fan table contains information about the temperature and the fan speed that means the depands on some level temperature fan speed.
  Over all the possible game features as the CPU, GPU, produce heat and the heat dissipation is high
  Cooling modules would begin to turn faster if the temperature level would be exceeded
  This is nothing exceptional everything at stake

  > Also on a couple of times I got my screen briefly go black and then recover. A pop up appears saying something along the lines of the core of the graphics card.... Driver recovered. It flashes if fast, that I never see the entire message. Don't you think that something is wrong with the graphics card? (card nividia geforce gt300m)

  I read on a similar question, and apparently, the graphics card DRIVER crashed during games
  Maybe it's a compatibility problem between game and pilot
  In most cases the graphics card driver update should fix this and I read on some forums that it has helped in many cases

• This video card will fit with my card mother MS-7613 (Iona-GL8E)?

  Hello.

  I am looking to update my video card in my Pavilion elite HPE-431f desktop PC with this card:

  http://www.Newegg.com/product/product.aspx?item=N82E16814130910

  The dimensions are 9.5 "H slot card 4.37" 2. I'm worried about the bottom of the card to hit the heat sink:

  

  I think it will clear the RAM and the power connector 24 pin but looks like it might hit the heat sink, because it takes 2 slots.

  And before ask you, I improve my diet too for the card. I haven't ordered yet to the card and I did not really

  want the hassle of a return.

  Anyone can shed some light?

  Thank you.

  On condition that the heatsink you speak is not larger or only slightly as the PCIe x 16 slot, you should be fine.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation