question record MC7

Similar Questions

• Question record DNS SRV + VCS Expressway

  Hi all

  I have a South, VCS in the DMZ, and I am facing a problem with the SRV DNS records.

  VCS Expressway Hostname:-VCSe

  Domain: example.com

  FULL VCSE domain name: VCSe.example.com

  and I have an a record set up for the same FQDN in DNS Public Server.

  I have a sip domain configured as 'cisco.com' in my VCS Expressway.

  What is the SRV records, I need to create in the Public DNS server.

  Kind regards

  Nikhil Jayan

  Nikhil,

  It seems that you have not checked the link I sent you earlier... A very explicit documents. in any case that we talked about earlier is we were talking about signs send calls to the highway as well as parts of the record.

  In your deployment, you have a different domain for DNS and SIP domain. Also as you say you meet Highway cluster and you want to record to both endpoints and then I suggest you to check the document for the creation of cluster on cisco webesite.

  Now, if you have a cluster for Highway then you must create several srv records that would be pointing to each domain name FULL of the approved cluster with equal weight. In normal use scneario of domain common to different services are recommended.

  Srv records would have seen something like that.

  _sips._tcp.company.com. 86400 IN SRV 1 1 5061 vcse1.company.com.

  _sips._tcp.company.com. 86400 IN SRV 1 1 5061 vcse2.company.com.

  _sip._tcp.company.com. 86400 IN SRV 1 1 5060 vcse1.company.com.

  _sip._tcp.company.com. 86400 IN SRV 1 1 5060 vcse2.company.com.

  _h323ls._udp.company.com. 86400 IN SRV 1 1 1719 vcse1.company.com.

  _h323ls._udp.company.com. 86400 IN SRV 1 1 1719 vcse2.company.com.

  _h323cs._tcp.company.com. 86400 IN SRV 1 1 1720 vcse1.company.com.

  _h323cs._tcp.company.com. 86400 IN SRV 1 1 1720 vcse2.company.com.

  _h323rs._udp.company.com. 86400 IN SRV 1 1 1719 vcse1.company.com.

  _h323rs._udp.company.com. 86400 IN SRV 1 1 1719 vcse2.company.com.

  However, your case is different. In your deplyoment what you have to do is any request for the domain "cisco.com" should be resolved in FQDN of the VCS-Highway peers with equal weight.

  for example

  _tcp.gmail.com. IN SRV 20 0 5222     talk2.l.google.com.

  Therefore, any request to gmail.com would resolve to the talk2.1.google.com server.

  same way you have to make it work.

  Thank you

  Alok

• Question: Recording dynamic form as a extended drive (allow save) causes certain header lines to repeat

  I use LiveCycle to create forms/electronic spreadsheets for the group, I support at work.  I had two worksheets have this problem recently.  An I was able to fix by going to my previous version, a re-release and re-recording.  The other continues to be a problem.  The worksheet is dynamic and has several added features of the line.  The form continues to operate correctly, but header in some tables lines repeat when recording in extended format reader that my allows to record the form (required for our work).  I completely re-did the spreadsheet from scratch, as well as a re-issue of previous versions with no luck.  The best I can do is get repetitions to change header lines.

  It's the dynamics of files prior to registration as a reader extended document:

  

  And after:

  

  Any suggestions on how to fix this?  I can't spend hours to recreate the whole document, if its just happen...

  Thank you.

  You said that it is in some tables. Just saw the tables that are affected:

  • Is there scripts implemented that create the table dynamically? Or the tables already exist, and additional lines are added dynamically?
  • Look at the name of the header line. There are scripts that reference the header lines?

• Question record RTMP using FMS

  We have a flex application to record a single video stream RTMP on FMS to limited of 100 kbps bandwidth. When the network comes down to 40 to 60 kbit/s and

  raises to normal, the recorded video must not freeze and audio/video synchronization on the recorded video should be fine.

  The problem is that we are facing, when the recorded video is played back in a player (VLC), we noticed that the video is still frozen where the

  network of dips to 40 to 60 Kbps for a few seconds and only audio playback. Also noticed the video is normally when the network is normal.

  Don't we have any solution to fix the freeze on the recorded video. Can we play with Buffertime to solve this problem? If so, how?

  Note: We have no functionality of teleconference of multi here and it's only a record only RTMP stream.

  Or, do we not have any RTMP that stores packages in the client browser and it sends to the server to store the video?

  We solved the problem by using the netstream.bufferLength. First of all, we have the buffertime to about 60 sec. When the registration is finished remove us the camera and the microphone of the netstream and seeking the bufferlength become null to a timer and after that we are closing the stream. In this way, the video is completely saved.

• Question record RH7

  Long story, but the runs, we (my company) bought the Technical Communication Suite 1. We had to update some documents using HR (normally not something that we use or would never use). The it Department did not our original discs, but found our customer number and serial number. I was able to find a stand-alone Installer to RH7. Installed and entered the SN provided by our IT Department. He says that the number is invalid. Can't you use the stand-alone Installer RH7 with TCS1 serial number? You would think it should work, but it doesn't. Talking with Adobe customer service staff was pretty futile, they wanted to update us TCS2 or RH8, but since it is a single update, we really want to spend the sum of $1,000.

  Any ideas?

  It seems I was mistaken that you are eligible for the media. I thought that was the case, but I just found this page.

  http://kb2.Adobe.com/CPS/153/tn_15300.html

  Media is only available for the previous 90 days after a new release. If only media RH8 is now available.

  Not sure, but I suspect Microsoft and MadCap would have a similar policy.

  See www.grainge.org for creating tips and RoboHelp

  Follow me @petergrainge

• HP DV7-12xx - display driver stopped responding

  Model: HP DV7-1232nr

  System: Windows 7 Home Premium 64-bit

  This laptop was having overheating problems when I got it. I have attached a platform of double USB fan led to her and which has helped considerably. I keep a temperature monitor runs in the background to alert me when time pass through more than 90 C.  In general, with navigation average and no video, I can stay between 70 ° c - 80 c.

  I had done a few things administrative for the laptop, including a full defragmentation and update to the latest version of the BIOS (F49) because I upgraded the OS from Vista to Windows 7 (expected an improvement).

  Everything was going well for several days until that I installed the latest ATI Catalyst Control Center.  Then that's when things started badly, but it may be a coincidence.  I noticed that when I started the laptop and it runs pretty cool, I would get these UI freezes, then "display driver stopped responding but has recovered" type of messages.  They would like to happen every 60 seconds or more.  HOWEVER, the laptop once warmed up, they would stop.  This has become particularly sensitive when I first start the laptop in the morning.

  I thought it's maybe some kind of problem with the ATI CCC, so I tried to uninstall it but then ran into all sorts of errors - he refused to be removed from my system.  I had to manually get it (edit, painfully long registry).  In any case, the driver earlier that I could come back was the "current" available on HP... and installation that it resulted in the same matter; This display driver problem when the laptop runs cool.

  It is ironic. Problems occur usually when a computer overheats, not when it's cold!

  So... is it software or hardware?

  I have a Linux (Ubuntu) partition, which worked perfectly well.  I booted up into that and... low and behold, I would periodically go into lock up, especially when the laptop is cold.  But this was not always the case.  When I first got the laptop and reformatted, it was fine, any time.

  I'm still not sure if it's hardware or software.  My thought is... was there any question recorded with BIOS F49?  I heard that some underlying problems can trigger problem display driver, which means that there is really nothing to do with video drivers.

  I've also run a full CHKDSK and a Piriform Defraggler disk check and it extracted a - OK... even though the hard drive suffered some sectors failed previously that were much more early on avoided with a complete reformat.

  QUESTIONS RELATING TO THE:

  * If it is a software problem, what are the recommendations?

  * If it is a possible hardware problem, is it possible to prevent the problem or am that I confronted to a replacement of the motherboard or just wait that the laptop "heated" enough before using it?

  CHANGE!

  Well... I thought that the laptop was fine when it is hot, but this display driver doesn't answer more question arises again while I was typing this message (Mobile CPU at 66).  But it happens now, after running for about 30 minutes of hot.  Then... material can get which is flaky? I thought that it's usually an all or nothing with the material (works or does not work), and that the software drivers, commissioning of all sorts of scenarios of data different throughout the usage would be more suspect for intermittent failure.  Is there a video driver DEFAULT Microsoft I could replace to exclude drivers ATI?

  Thanks for any help you guys can provide.

  "If you keep an open mind, life will give you more opportunities."

  It's certainly plausible. I have not heard of questions with a mosfet specifically, but this issue certainly seems to be motherboard related. There are "companies" out there that repair card mother offer, but it may be more cost-effective to buy a new motherboard.

  You can also try to use a Map of Test Post if you have one or can borrow one. I don't like to think about buying something, unless I know it will solve the problem, but if the computers are a hobby for you, Test Post cards are a very handy to have around. If you decide to get one, look at the comments and make sure that he has the right connections to be used with your computer.

• Lov Vs list item

  Hi all
  
  What is the difference between a LOv element and list. Why use one over the other?

  Hello!
  There are some important things on her list items:
  If you questioned records in your block, you cannot clear the list and refresh it.
  If you query the records in your block and there are values in the database column
  are not in the list, the records are simply deleted until you specify a 'another value '.
  for your list item.

  If you have static values for the choice of the user, use the items in the list.
  If you have a wide range of values which must be more flexible, use lovs.

  For example: create an invoice, use a lov to the name of the customer, if
  the customer does not exist, create a new customer and redisplay the lov.
  For the shipping type, use a list item.
  Concerning
  Stauder

• Questions about the record HDD Recovery - Satellite L350D

  Hello everyone!

  I have a Satellite L350D with Windows Vista.
  I'm in my mind to reinstall.
  All my data from the two partitions are saved with the exception of a folder on my drive E Data "HDDRecovery" who shouldn't be modyfied or deleted, or whatever.

  I wonder if all the data are removed from the hard disk due to formatting, how does appear that this same folder HDDRecovery remains safe on the hard drive?
  Or is that the hard drive is not really formatted and data on my hard drive are always safe and hidden?

  Thank you for answers!

  Hello

  I'll try to explain how it works.

  Original Toshiba designed for your laptop recovery image is recorded on the second partition in the file called HDDRecovery. This image should be used if you want to install OS and have the original state factory.

  For this installation, you can use this recovery image of the second partition or by using the recovery DVD. It is recommended to everyone to create this recovery DVDs. Have you created?

  If you use recovery DVD the whole HARD disk will be formatted and all data stored thereon will be removed.
  If you start the HARD drive recovery process only C partition is removed. This folder HDDRecovery is important if you only want to use HARD drive recovery facility. When you want to use the DVD only you can remove (I do not recommend you to do).

  I hope I could help a little, but if you have any other questions please let us know.

• Question on the recorder of actions (ESP) for Windows XP.

  Hello team,

  I'm really impressed with the new tool of the action recorder, which comes with Windows 7. It really helps and saves a lot of time.

  Is there any recorder measures (PSR) problem for Windows XP?

  If not, what third-party tool you're suggesting which can be used with Windows XP?

  No response to most early would be really appreciated.

  Yes, it's mainly for end-users to use, let us know what they see.

  Example: To re-create a problem, in a graphic way, etc.

  There is no directly (just as) tool I know.  However, you are not the first to ask the next question.

  You can watch in this solution which was mentioned several years ago and you can get them directly from this article.

• question re. records programmed in windows media Center

  I want to record a tv using Windows Media Center (WMC) series. I configured the tuner, WMC and took the series to record using the guide. My question is: what I must have WMC running in the background for the scheduled to start recording, or WMC itself will start at the right time? In addition, it will start my laptop? in other words, can I just turn off my cell phone (to save energy) and let and WMC invites you to my computer to start up and/or start WMC when programmed recording? Thank you!

  The laptop doesn't have to be on, but if it isn't then it must be in mode 'sleep'. If you do a full closed then media library will not be able to restart the laptop, but it can be awakened from sleep mode.

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• Digital Dictaphone with Windows 7 questions. Recorder current is not compatible and do not find online that will be compatible.

  I recently bought a computer with Windows 7 64 bit home edition for my father. His job requires him to use a digital voice recorder to dictate things and send by e-mail to his company in the .dss format. He is currently using a recorder Olympus DS 330 on its old Windows XP machine. I called Olympus to ensure (an Olympus DS-330 recorder voice digital) device would be compatible with Windows 7 BEFORE buying the new computer for him. They assured me that "with version 7.1 of their new software it should be compatible. I was worried because the rep on the phone with me does not seem very confident in her answer and him using the word "should" is never a good thing.

  Sure enough I got the new Windows 7 computer running, installed the software, they told me to get their site, connected his player... The device has been recognized as connected BUT no driver could be found. Nothing I've tried the last hours won't work because there is simply no driver of Olympus or someone else to make this device work with Windows 7. To make matters worse I can't find a single digital voice recorder to buy for him online that IS compatible with Windows 7 Home Edition 64-bit.

  I thought that this OS was not suppose to have questions 'pilot' that brought the Vista. Clearly, this isn't the case. Now I'm stuck with a computer of my father can not use everything just because Windows 7 can't find enough important digital voice recorders work with. Someone has an idea of a recorder of the word that is compatible with windows 7? Yes I have not looked at this site "Compatibility Windows"... no luck. So, if I can't find a... Looks like we're $500 thanks a ton Olympus and Windows 7!

  Thanks for posting that.

  The compatible ID confirms that it is not only a storage device, so it uses just the drivers supplied with Windows.  If this isn't a problem with Windows 7.  This is a problem in which the hardware vendor must be resolved.

  I searched online for the VID & PID and found only a few strokes on Bing.  None of them make no mention of 64-bit support.  And they are all pretty old.  I see dates pilot since 2001.

  So the best option is to contact Olympus again to see if they have drivers for Vista 64 bit or Windows 7 64 - bit for this device, or to confirm to you what devices ARE supported on 64-bit.

  Looks like the above driver package for their recorders VN series.  It seems to be relatively cheap - http://www.olympusamerica.com/cpg_section/product.asp?product=1389&fl=5&acccategory=84 (the VN5200 is still cheaper).
  Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• question about DNS records

  Hello

  I installed on my windows 7 NAS synology (to put my video and music on it), now I can connect remotely to my URL of SIN, which is for example http://bob.synology.me:5000.

  now, I have installed on it video station and when I get like the bob.synology.me:5000/video instructions.  I've got access denied because of reverse DNS.

  what I need to do / nested dns record video.

  My only question is here after someone has a bob.com URL and then he wants to access some software on their server in this example is a video you need to do a separate DNS record after / Video

  Johan

  Hi Johan,.

  The problem you are having is better suited in the Microsoft TechNet forum. We have a dedicated team to help you with such questions. I suggest you post the same question in the Microsoft TechNet forum for assistance.

  Microsoft Technet Forum: http://social.technet.microsoft.com/Forums/en-US/home

• Question VCSE Bind9 Dns Srv record

  Hi all

  I recently put in place a solution of VCS Express in my area, but I need your help to solve my problem of dns.

  My infrastructure is:

  1 VCSE optional NIC for dmz 2 and natted with the public IP address

  VCSC lan subnet 1

  Everything works fine, covered call, record (Movi) from the outside, call SIP/h.323 IP or dns, interoperability... Everything is ok

  My question are dial endpoint not registered.

  When I call to outsite in:

  [email protected] / * /, working (I create a processing rule to convert the IP to the domain)

  [email protected] / * / work but the search rule failed in agreement with my search rule

  [email protected] / * / Is not no incomig call

  I suspect that there is a misconfiguration of the dns.
  We use servers DNS Bind9 as authoritative for our area

  I configured according to deployment guides, SRV records and has to point my public IP

  I try to question my DNS from the outside, nslookup and utility dig, query returns OK

  I do not know well Bind9 and I don't understand why calls are not received in the form [email protected] / * /

  I am attaching a sample of my DNS zone file

  $TTL 86400; 1 day
  @ IN SOA ns1.mydomain.com. root.mydomain.com.)
  2011072147; Series AAAAMMJJNN
  7200; Refresh every 2 hours
  7200; Try again every 2 hours
  7200; They expire after 2 hours
  14400); Minimum TTL of 4 hours

  IN NS ns1.mydomain.com.
  IN NS ns2.mydomain.com.
  IN NS ns3.mydomain.com.

  mydomain.com. IN NS ns1.mydomain.com.       "After you have created this entry, the call to [email protected] / * / began to operate.
  mydomain.com. IN A X.X.X.X
  ns1 IN A X.X.X.X
  NS2 IN A X.X.X.X
  NS3 IN A X.X.X.X
  vcse IN A X.X.X.X
  _h323cs._tcp.mydomain.com.                   86400 IN SRV 1720 10 10 vcse.mydomain.com.
  _h323ls._udp.mydomain.com.                   86400 IN SRV 10 10 1719 vcse.mydomain.com.
  _sip._tcp.mydomain.com.                      86400 IN SRV 10 10 5060 vcse.mydomain.com.
  _sip._udp.mydomain.com.                      86400 IN SRV 10 10 5060 vcse.mydomain.com.
  _sips._tcp.mydomain.com.                     vcse.mydomain.com 86400 IN SRV 10 10 5061.
  _sips._tls.mydomain.com.                     vcse.mydomain.com 86400 IN SRV 10 10 5061.
  _sip._tls.mydomain.com.                      vcse.mydomain.com 86400 IN SRV 10 10 5061.

  ; This article is for the test

  ; mydomain.com. NAPTR 50 50 "s" "SIP + D2T" "" _sips._tcp.mydomain.com.
  ; mydomain.com. NAPTR 90 50 "s" "SIP + D2T" "" _sip._tcp.mydomain.com.
  ; mydomain.com. NAPTR 100 50 "s" "SIP + D2U" "" _sip._udp.mydomain.com.

  any idea is appreciated!

  Sorry for my English

  Concerning

  Giorgio,

  Please check your PM it seems that you have a typo in your SRV records.

  -Andreas

• A & QUESTION SRV RECORD

  I have a real?

  Have a network of VCS X8.2.2 of two cluster control.

  I was running a three server cluster, but due to latency issues took the VCS3, I deleted from the cluster and makes it independent.

  I removed the intellectual property of the counterpart of cluster list also.  That was months ago.

  Problem is this morning when systems checking, I noticed that one of my VTC systems was recorded on the single VCS3 media... Problem is in the system in the H.323 call control settings, I have the SRV cluster name and not the IP address of the VCS3 yet he him?

  I don't want any system recorded in the autonomous VCS3 and want to keep the name of the SRV cluster in the area... ???  I changed the doorman affecting intellectual property SRV record and he also recorded for the VCS3...?

  What could be causing this to happen?  Also, the priority is set to one on all of the SRV records.

  VR

  Chet

  I suppose that you in fact removed the old SRV records and replaced by a new that has not listed of VCS - C3?

  If you want to ensure that no system is able to register with that specific VCS, define a strategy of 'Decline' record for the sub-area of default and all other Subzones, you might have on this VCS.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.