Questions about Flex Builder

Similar Questions

• Flex Builder is required to change a flex application?

  Hi, I made an application swf with Flex Builder 3 using mxml files. Now I have to deliver the application to a designer in my division, so I would like to know, if he wants to modify the application, should it use Flex Builder as well? Adobe CS3 wouldn't be enough?

  I wonder if he can change the design you in flex builder in the tab design (drag drop component...)

  Thank you

  Well, to answer your question topic, Flex Builder is not necessary to change the code MXML or ActionScript that make up a Flex Application.

  You can use Notepad - or any editor of text and re - compile against the SDK command line.  There are also alternatives, FDT comes to mind as one.  There are also a few plugins for Visual Studio.

  None of this solves your real concern.  As far as I know, there are no tools in CS3 [or 4] which will give you a 'Designer-style' access to a Flex Builder project.

  It looks like you want Flash Catalyst; However, it is still in beta and has limited support of the architecture of the Flex 3 components.

• Flex Builder 3 plugin question extracted Installer

  I downloaded the Flex Builder 3 for Windows plugin today and tried to run in. The InstallerAnyWhere has a popup saying "Please select another location to extract the installer to" but anywhere on my system file I select it still maintains the same question. Only option is to cancel the installation at this point. Anyone know when this will be fixed?

  It seems that our corporate firewall corrupts the download. I have access toa version someone downloaded home and that worked correctly.

• A Question about debugging...

  Hi all

  I have a question about debugging - specific probes. Is it possible to link and save the values on a wire (with a probe) which is a loop for the loop counter (or even a secondary value)?

  When I'm debugging code to a state machine that I often more easy to wire to the top of the State and the value, I am interested in a cluster, and then use 'generation antenna' and a registry change to add this element to each loop. I could also do this by indexing just out of the loop too.

  Once execution completes etc that I can look at the table (either using an indicator or a problem) to see what has happened to the value to each State/loop. And often, I know exactly where my code was wrong.

  My question is: is there a way to do this using regular probes without having to build an array? So, for example, I probe a digital wire and get a table of responses rather than just the last value on the wire?

  Thank you

  Dave

  I found this nugget that does exactly what I want - it's a custom probe developed by Darren.

  This post on the Exchange of ideas gives to think it should be at least provided with the package LV either integrated in the dev environment. Well worth voting for!

• Question about support for LabVIEW DLLS and Unicode

  Hello

  I have a question about LabVIEW and DLL functions calls.

  I use a DLL (sorry, I can't share it) that was written in C. It was written to support Unicode and non-Unicode function calls.

  The Unicode function is valid, then FunctionNameW is called if FunctionNameA is called.

  I am building a few VI to access the library. I have the regular functions of FunctionNameA work.

  My question is, does LabVIEW support versions of function FunctionNameW Unicode, and if so is it necessary Although LabVIEW is already working with the standard function call?

  Am I being redundant or what should I build in Unicode support?

  The first time I tried to test the Unicode functions, I had an error, and I guess this is a system setting.

  Thank you for your time in advance.

  DB_IQ wrote:

  I don't think I have TO implement the Unicode, but I want if I can.

  For what I do, I think almost it is not serious. But I wanted to know if it could be used.

  The short answer is "Yes, you can do it."  However, it may open a new Pandora's box.  If you're not careful, problems and complications that can still spread to other projects that are not using Unicode!  It is better not to summon this monster unless there is absolutely no other way to do the job.

• General question about the updates and version number

  I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

  In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

  Version - VMware ESXi, 5.1.0 1612806

  Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

  I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

  Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

  I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

  I hope this makes sense.

  Thank you

  This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

• Flex Builder for vCenter plug-in development

  Hello

  I use currently a version track Flex builder available for vCenter-Extension development. We do you use Flex if often, should I buy Flex builder (Flash Builder 4.6) license for the development of a plugin-vCenter. Ask yourself what are cost-benefit vs specifically for the development of vCenter plug-in that I can point to for justification to our society.

  Some of the tools provided by VMware are clean enough, such as the project creation wizard vSphere-Web-Client which has Flex-Plugin. This has a dependency on Flex/Flash builder?

  Thank you!

  (do not forget to post your vSphere Client Web plugin questions on this other forum dedicated to this platform):

  ( http://communities.vmware.com/community/vmtn/developer/forums/vspherewebsdk?view=discussions&start=0)

  If you are developing a serious plugin I recommend to get the license of Flash Builder (or try a few days without it to see the difference).  As the doc to install SDK says:

  "Adobe Flash Builder is not required to compile Flex code (the Flex compiler is included with the Flex SDK, see how it is used by Ant scripts provided with examples of the software development kit), but you should install it to enjoy the debugger and have a better development of experience within Eclipse.

  The project creation wizard is an Eclipse plugin that does not rely on Flash Builder.

• Questions about migration on server 1 for win 7 PC temporarily

  Hello, I am charged with moving that customers 2 of our current of 2 to VMware host separate Windows 7 64-bit PCs TEMPORARILY so that I can install for free ESXi 5.1 as the new host (replacing the current host, which is a Standard operating system Windows Server 2003 on a server Dell Poweredge 2950 using VMware Server 1.0.10).  After the ESXi installation on the server, I intend to spend both clients as they exist now to the new ESXi host.

  I have a few questions about this project, and I hope I can pull your knowledge to help me.  My question is:

  (1) is this a feasible plan?

  (2) what methods would you recommend using?

  (3) should what tools I use?

  (4) can what version of VMware (free) I use on the 2 Windows 7 workstations to serve temporary guest?  A customer is our Standard Windows 2003 domain controller, and the 2nd is an email server and Linux-based web.  I intended to put each on a separate office.

  Any help you offer is greatly appreciated!

  Thank you

  D. Pichard

  You can use vmware player as a free virtual machine player.

  Use vmware converter to convert your servers.

  Is not recommneded for convert DCs however, what you might do, it is to build a new one. However, it is possible.

  the dell 2950: your host in the HCL as compatible uses 5.x

• Question about RAM CL

  Hi guys. I'm finalizing my PC build and I have a question about ram CL I can't find answers for hackers page here. http://ppbm7.com/index.php/news/planning?showall= & start = 3

  I would use these two RAM sticks for example.

  Module 240 pin DDR3-1333 transcend JetRam™ 8 GB High Performance: CL9, layer 6 circuit board

  Transcend JetRam™ High - Performance 8 GB DDR3-1600 240-Pin Module: CL11, 6 layer PCB, ultimate card stability and cross-platform compatibility

  My question is, what is the best for video editing? On the one hand we have 1333 mhz to with a CL of 9. On the other hand, we have RAM 1600 mhz faster, but at a higher CL of 11. Now, I'm not one to get caught up in the technical aspects as it may seem, but I don't understand so I can make decisions, especially when price is a factor. In this case however, they are at the same price...
  

  Well good for video editing, important criteria for RAM is:

  • Never, never crashes - it is very important; choose only RAM sticks (certified QVL) certified provider and do not use unmatched sticks
  • Speed; faster is better - while true also, past at the speed of the RAM, or lowering of the CASE wait cycles (latency) contribute to the speed, but the gains are very low; Faster RAM is hardly perceptible vs CPU speed more fast which is very sensitive (I played with it a lot on some versions overclock and test first with PPBM speed and speed up the processor 5% performance contributes to 5% where speed RAM about 30% can speed up about 1%)

  Google "what is the CASE for the RAM" and one week at self-teaching yourself if you want to even begin to really understand speed RAM! I know enough to know there is a lot to learn about the subject. The good news is that you don't need really to know a lot to build a reliable, excellent for running Adobe products, including the first, Photoshop and After Effects:

  • Use only RAM who has certified the seller of memory for your motherboard; do not assume that if the seller indicates a set 4x8Go of sticks that will work with your motherboard that two sets of such RAM will work with a card mother 8 locations either! (too late to discuss here, but various factors may override the controller memory in the processor itself - factors include voltage RAM, number of sticks, RAM clock, status of CASE of waiting settings speed, voltage of the cpu memory controller and maybe more)
  • Increasing the speed of the RAM always helps if slightly for first speed up to 1600 MHz (for x 79 in any case) and wins the speed of RAM which are still lighter

  Now, back to why both sets of sticks are the same cost. They most likely use the same chips of RAM, which is an important factor for what it costs to build the RAM sticks. While the Asus motherboard you buy allows full customization of many, many, many things, unless you are an extreme Overclocker and plan to spend a few weeks to fine-tune a new simple version you in the bios of motherboard and it say to use XMP settings. This indicates the motherboard, how to set the speed of the RAM and sticks of timings CASE for your particular RAM with the settings the seller intended.

  You really know a lot about what you are doing to set the timings RAM in any way other than the simple choice of XMP settings safely. And, you can easily burn your CPU if you don't know what you're doing and you choose some really bad parameters.

  Kind regards

  Jim

• A few questions about integration between POET and EBS

  Hi you
  I am a new bie BIEE. In those days, have a look at the POET architecture and BIEE components. In the next project, there is some work on the development of POET based on request of the EBS. I have a few questions about integration:
  
  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?
  
  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?
  
  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?
  
  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?
  
  could someone give some pointers for me? I am very appreciated if you can also provide any other information.
  
  Thanks in advance.

  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?

  You shud look at OBI request here that uses OBIEE as a tool for reporting with pre-built modules. 10g & 11g comes with different versions of the applications of BI that supports sources such as Siebel CRM, EBS, Peoplesoft, JD Edwards, etc...

  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?

  His independent of any source. It comes to OBIEE modeling to create the RPD with all the layers. If you build from scratch, then you will need to create all layers else if BI Apps is used so you can get pre-built RPD and other pre-designed components.

  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?

  BI apps comes with ETL pre-built mapping to use with the tools majorly with Informatica. Only applications BI 7.9.5.2 comes with ODI, but oracle has the intention of having only ODI for any other versions.

  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?

  User will see still old data because its good enable Cache and serving it after each load.

  See http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html...
  and a lot more docs on google

  Hope this helps

• Ghost of entities in Flex Builder 4 - how to get rid of them?

  Flex Builder 4 cannot create a release build, unless I included a "dummy" file, named after the name of the original project.  I created a new project with an application "root" of the same name (project - Projectx and there's a ProjectX.mxml app to go with it), but it will not be built unless I also include a ProjectY.mxml file which was the original name of the project before export and import.  This isn't a serious problem, but I want to get rid of the ProjectY.mxml since there is no function (excetp to make the project to build successfully, which I suppose is a function of all kinds).

  Thank you

  Doug

  Do you have the new master project file right click and select "set as default Application"?

  If this post answers your question or assistance, please mark it as such. Thank you!

  http://www.stardustsystems.com
  Adobe Flex development and Support Services

• How to use Mozilla, when you click on run Application in Flex Builder

  Hello

  I have Mozilla FireFox and IE installed on my Machine, the problem is that every time I run the icon run the Application, the view gets posted on the IE.

  I don't want to use it is to say that I have problems with regard to the Flex Application profiling.

  Please let me know how is possible to set the Mozilla for are displayed when Flex Builder runs the Application.

  Thanks in advance.

  Hi Kiran,

  Do the following... .in your IDE Flex Builder of

  Window > Preferences > General > Web browser > Firefox

  then click on apply and ok... that's it.

  If this post answers your question or assistance, please mark it as such.

  Thank you

  Jean Claude Chari

• Adobe Flex builder 3 crashes

  Whenever I try to do a simple program, flex builder 3.0 firm and gives the error, as shown in the file attached. Can anyone more closely and suggest me to fix this problem.

  To uninstall everything related to Java on your machine, then uninstall and reinstall Flex Builder.

  If this post answers your question or assistance, please mark it as such.

  Greg Lafrance - Flex 2 and 3 certified ACE

  www.ChikaraDev.com

  Flex / development, training, AIR and Support Services

• Flex Builder detects more errors against the definition of the Array class.

  Hello

  I don't know if this is the right forum to post this problem, but here goes.

  I've been developing an application using Flex Builder 3. Today, I met a strange problem. When I use a table variable in an Actionscript class, the compiler detects more errors against the class definition. I have only encountur this behavior with the Array class. Other classes of higher level, seem to work. F.i. I can insert the following text in a function:

  var a: Array = [1, 2, 3];

  var i: a.Len;

  After construction, I get no error. When I run the application, the variable I is set to 0.

  I tried to clean up the existing project. I created a new project in flex from scratch. The problem remains.

  I did not have any updates lately, f.i. flash player, java,... the development environment has not changed as far as I know.

  Can someone give some advice about this problem? Thank you.

  Kind regards

  Wim.

  The table is a dynamic class, as an object, which means that it is perfeclty happy to return values for properties that have never put. These values will be "undefined", which, when converted to an integer, turn into 0. This is the kind of unfortunate behavior, but there is no way to get around.

• How better to organize Flex Builder projects within a source code control system?

  Hello world

  I'm working on a team of average size of a company product developers who will use Flex on the front-end, remote access services for Java objects on the server, etc.

  Right now, I just created a sample application with a Flex Builder in Eclipse project and the use of WTP.

  I'm looking for advice or suggestions on the best way to organize a large Flex/Java project for the team with subversion, etc.

  Is it wise to record all of the Flex Builder project (i.e. files properties etc..)?  Our development environments will be identical, because they will be the virtual computer images.

  I did a lot of research and found a few bites, but I thought I'd see if I could get feedback from other people who have experience with this or are organizing their code source etc.

  Thank you very much

  FortPointUIGuy

  1. Yes. Note that once Java and Flex in the same project, I first had to create a Java project, and then something like Flex Project Nature > add Flex Project Nature. Try to do the reverse (start with a Flex project and add the Java code) worked for me.

  2. it's been great. Franck Wolff, the lead developer, has been very sensitive on their forum (even with stupid questions that were actually my fault). He added that some requested features for as3 Enums, and overall we were pretty happy. We do not actually use the fanciful granite features (other than his actionscript generator gas3 of objects for the AMF client-side); We use it mostly just because we moved to her before the Blaze. However, we have no intention to the flame.

  3. Yes, throw us just jars of granite in our war, although maybe this isn't the right thing for everyone. We have a heavy enough demand, so we can dominate the server simply assume. It worked well for us, althoough I do not think that we have already shared our tomcat with any other web apps, YMMV Yes case.

  And no problem - glad you help.