Black screen T400 with windows xp

Similar Questions

• HP Pavilion black screen dv9890ed with windows 7 and 8

  Hi, where can I find driver software for my dv9890ed HP Pavillion work with windows 7 and 8 - thanks in advance. I don't have the original driver that ships with windows xp.

  [email protected]

  Hello

  You can download the drivers for windows vista from the link below and even works perfectly for windows 7.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3717528

  for windows 8, I don't think that you need all the drivers for this PC - once that windows 8 is intalled it works perfectly and pick up all the drivers microsoft driver database.

  Good luck!!!

• Given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen to enter Windows. STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Help.

  I just got a refurbished Compaq 7700. It has Windows XP for drives of the refurbished computers.

  I try to boot from the hard drive (HD) and infinite loops, it is never past the initial home screen (black with blue status bar).

  I can't open the safe or the HD mode, it freezes at kmxstart.sys and then restarts again.

  Original title: given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen, to enter Windows.

  I tried to boot from the disk and created Windows appears, then load the files, but then automatically tries to start Windows (without repair option). It then jumps to the BSoD with error code (after advice to verify sufficient disk space, to disable the driver identified, to change video cards, BIOS updates...)

  STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Usbccgp.sys - address F773B15F base at F7737000, DateStamp 480254d 2

  Apparently, this driver is a printer driver? I don't have a printer, but do not know how to disable it without access to windows.

  I got a new Philips 18.5 "monitor, an optical mouse and a keyboard with it.

  My guess is that the screen is the problem, because it was full again when I received and therefore not tested with the system before shipping. Not sure about the mouse and the keyboard.

  I tried a few options in the BIOS screen as well, but no dice.

  Help! Before shipping the brand new...

  I thank you and have a wonderful new year.

  Craig.

  Howdy Daavee and Shekhar,

  I hope that your day is going well.

  It turns out that it was the hard drive, it was defective. The new unit arrived and it works beautifully. Thank you very much for all you help. I wish you a happy new year.

  Craig.

• Windows/Windows Live Movie Maker no video black screen. but with the audio and subtitles...

  I made a movie in windows live Director and windows movie maker in windows live movie maker, he's playing very well and I've registered as a project and a movie (on my computer), but as soon as I opened in windows movie maker, windows MediaPlayer, youtube or anywhere else, half of the video goes to a black screen. I had all the audio and subtitles, ect for the first minutes of my film no photo or video. I tried to convert the file type, I tried to burn to a disc, then I just gave up and he made once again. still the same problem... Please help? :(* Le fichier EST àle format WMV et je l'ai ai copié et converti en autres formats et juste le même problème à nouveau... quelqu'un peut_il s'il vous PLAÎT m'aider?) its for a project, my friends and I are trying to do and we spent 5 weeks of filming and editing just to be confronted with a problem end:(, je serai vraiment reconnaissante à toute personne si ils peuvent m'aider à résoudre ce problème)

  Hello

  The question you have posted is related to Windows live and will be well suited in the Windows live forum. Click on the link below.

  Windows Live Solution Center

  http://www.windowslivehelp.com/product.aspx?ProductID=5

• Pavilion dm4 1041tx: black screen after the windows logo

  My laptop screen has frozen while watching a video then after restarting it displays black screen but I can connect to windows using the laptop and fingerprint reader can be closed by windows by pressing and then alt + f4, then alt + f4, then enter. Works in safe mode. Disable the ati graphics card did not work. Same execution of recovery did not work.
  Hard drive test results:
  Smart check: past
  DST short: PAST
  Long DST: PAST
  Help, please...

  Hi @vikash4309 ,

  At this point I agree with the tech that look at the computer I think it's a problem with the hard drive or even the system board. They may give falsely on the test results. I would recommend that you take it back to this HP's Service Center.

  If you do not replace the hard drive recovery CDs should work as long as replace you it with another hard drive and not an SSD because they are different and the recovery CD will know how to properly partition the drive.

• black screen appears in windows movie maker

  My windows Movie Maker allows to work properly, I have windows vista, but this last year, when creating and previewing my film but nothing black screen appear instead of my movie... Don't know what happened. Even if idon't preview I will burn the dvd and then play on my dvd player and I still get the image black all through the film I've done. I tried to change all the filters in any way diff but no luck. I can't get any help from anyone. Help!

  Maybe... I want to say just maybe you would have a
  best result with and older version of Movie Maker.

  No guarantee but the next for an installable download
  version of Vista Movie Maker 6 may be worth a try

  * Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

  Also, Movie Maker 2.6 will work on Windows 7:

  Windows Movie Maker 2.6
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=34
  (this is similar to the version of Win XP Movie Maker 2.1)

• black screen that activate Windows.Windows must be enabled before validation to determine whether this copy of Windows is genuine.

  I am writing on behalf of my friend who has had his computer for a while with no problems. Today, it starts up to a black screen and then you had this message

  Windows must be activated prior to validation to determine whether this copy of Windows is genuine.
  Windows is in reduced functionality mode.

  It runs windows vista edition Home premium and it is authentic. However, it doesn't have a disc.

  can help you as he declares that he has 30 days!

  Hello

  1. is your friend able to boot to the desktop?

  2 are there hardware/software changes made on the computer, before the show?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool

  a. download and save the desktop tool

  http://go.Microsoft.com/fwlink/?LinkId=52012

  b. Once registered, run the tool.

  c. click on the continue button, which will produce the report.

  d. Paste the contents of the report in this thread.

  See also,

  How to contact a Microsoft Product Activation Center by phone

  Resolve activation problems

• Pavillion dv6 6b15ed: Driverupdate to fix the black screen at startup windows 10!

  Hello

  Question:

  Is there a new driver is released for my AMD Radeon HD card 6755 2? (double grafics)

  Because the latest driver causes a black screen at startup. Sequence: wenn turn on u see hp and that start-up logo win 10 after that it crashes on a black screen for about 2 minutes, then start 10. (about 2, 5 minutes later)

  I have now installed a windows 8 (issues) driver and windows starts in 6 seconds (with normal hard drive).

  I can't play the games but the bootspeed is good.

  So is there a fix or is there is 1 entry?

  TNX

  While the video card is not supported with the latest drivers.

  You can update as much if you want to, but isn't is not helping.

  Even in charge AMD said that this card is not supported with drivers.

  But today, I tried 1 times more, I used the old driver AMD_Display_13.352.

  With the first reboot, it was still black and some errors of the pilot, but after that the second quick start installation restarts!

  Appearance of the logo Windows 10 only 3 or 4 seconds and start immediately, without black screen and I got sound, video and video tube work as well.

  If other people having the same problem download Drivethelife and download the old pilot 13.352 and see for yourself.

  Make sure u delete all drivers previously installed with DDU (Display Driver Uninstaller) of guru3d site.

  Almost forgot: I also disabled windowsupdate to prevend install other drivers (new).

  Greetings

• Black screen after the windows login

  Hi, I have a HP Pavilion DV7 notebook with Windows 7 Home Premium installed on it. A problem I've noticed is that, once I connect to windows during a boot, the screen is black for about 1-2 minutes. After awhile, explorer.exe would with desktop, taskbar and icons. I am concerned about this 1 to 2 minutes of black screen after the boot as it did not exist previously. I know I have options such as restoring the computer laptop back to the default state, or by using the system restore. However, I don't want to lose all my stuff, and with respect to the restoration of the system, I'm not sure when the problem happening, as it was some time ago. I have read a Microsoft article, (http://windows.microsoft.com/en-US/windows7/why-is-my-screen-black-when-i-start-windows-7) and tried all the steps with the graphics card and the regestry, but nothing seems to work.

  -Task Manager is able to open when the screen is black (shows explorer.exe running)

  -J' have the drivers on the HP support site

  -laptop is HP Pavilion DV7 3024ca

  You will need to login using the method of trial and error. Please uncheck all of the MSCONFIG Startup tab and restart the system. If the black screen issue is resolved, then check out an application every time and restart the system. This will help you to identify the program interfere.

• Black screen after using Windows Memory Diagnostic

  Recently I have experienced problems with the system restore doesn't work don't not and although perhaps it was the file system and so I started Windows Memory Diagnostic and didn't know that you need to manually restart the computer and so I tried works again and again until what it finally hit me that I needed to restart it myself. He began to do his thing and I left a little to return to a black screen at 3:30 and it is now 23:00 and still nothing has changed. Don't know what to do and I don't want anything corrupt or damage my computer anyway. Is it normal for her and if not, how can I stop my computer safely?

  Hi Brendan,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver.

  I suggest you use the steps in this article and check if it helps.

  Reference:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Black screen startup repair, Windows 7 cursor

  After installation of about 25 updated today, my Windows 7 Ultimate Boot Camp partition on my 9.1 iMac no longer boot Windows. I think there could be a problem due to a video card driver updated, although I have no way of knowing if a driver has been updated.

  I use the Startup Repair tool, but I have a black screen with no cursor. I got the text screen to enter the startup as well as the Windows logo for a short period after this repair. When I put my ear close to the computer, I could hear the disk being accessible so I guess the Startup Repair did something, but now when I listen to it I can hear the fans. I started about 90 minutes ago the Startup Repair.

  My question is how can I find out when the Startup Repair tool is completed? Will it automatically reboot the machine, or wait for the user to input after it ended? Use mouse input any required or can I do blindly using the keyboard?

  Also, is it possible I could get Windows starts in Mode safe? This way I could isolate any problem with the video card drivers. There is no option to start in Safe Mode, when I turned on the machine. Note that because I use a Mac, I don't have the BIOS screens, I UEFI which, on Mac, gives only a choice of which partition to boot from.

  I need is no longer an answer for this.

  Here's what I did:

  I turned off the computer using the switch after 2.5 hours of startup repair and checking that I could not even hear the disk being accessed... Windows would not start again. I started in El Capitan (Mac OS X) and installed the rEFInd Boot Manager. I rebooted the machine, intending to try to fix it from a floppy disk, bootable USB Win 7 Ultimate, but selected by mistake partition Boot Camp and Windows started normally.

  The only thing I can think of that changed is that I installed rEFInd, but I don't know why, it would make a difference.

• Black screen after the Windows Logo

  I have a black screen after windows with no crusor logo and no keyboard work, I just tried all mentioned in the forum, but all of them are just useless happens just after I shutdown or standby or standby extended

  I use windows 7 ultimate 32 bit with the latest drivers & updates

  Hello

  What is the code of Bug_Check of BSOD?

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  Check the code from Bug_Check to Faultwire as shown in the above troubleshooting link.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Black screen on startup - Windows 7 Professional

  I recently installed Windows 7 Professional on my laptop MSI, 4 GB of RAM, processor Intel (r) Core (TM) 2 Duo CPU, 32-bit operating system, Nvidia GeForce 9600 m GT 512 MB.

  When I turn it on, there is all black screen. I pull the battery (until I discovered F8) and it starts in safe mode with network. Then, I reboot safe mode and windows load correctly. Two days before the blackout, the cursor would freeze too.

  Note I've read related topics, like the one in which it is suggested to disable the graphics drivers, and I recently downloaded new ones from Nvidia, but it started two or three days later, so I doubt it has to do with the graphics drivers.

  Should I try with the system restore or perhaps reinstall Windows?

  Yesterday, I found and installed both updates Optional:

  1 Realtek driver update for Realtek PCIe GBE Family Controller

  2 update for Windows 7 (KB976422)

  In any case, this morning, the windows loading straight, so with this optional support, the problem could be solved. I hope that nothing will change in the future, however.

• I get a black screen saying that Windows is not genuine.

  Original title: black screen after update.

  I have just completed an update to Windows 7. I now have a black screen with "Windows 7 Build 7600 this copy of windows is not genuine" in the lower right corner.

  Can someone explain in simple terms how to rectify this please.

  Hi Peter,.

  Perform the steps from the link below and see if it works.

  Windows 7 displays "Windows is not genuine" with a 0x80070005 error code

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  Good day!

• I uninstalled AutoCad 2013 after reboot I get black screen only. Windows 7 Explorer does not start

  I uninstalled 2013 autocad and autocad inventor of my laptop. I have windows 7 Home premium. Once the pc is rebooted, I get only a black screen with my curor. I tried to start in safe mode, but is samething.

  See if you can get to the "Startup Repair" via the F8 startup screen or your Windows Installer media if you have an installation DVD.  Try to run the "Startup Repair".

  Startup Repair.

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as missing system files or damaged, that might be preventing Windows to start.

  http://windowshelp.Microsoft.com/Windows/en-us/help/f768809f-ED90-415f-a83f-89b42108b3551033.mspx#EFF

  How to use the command prompt in the Windows Vista recovery environment
  http://www.bleepingcomputer.com/tutorials/tutorial147.html

  You can even try a restore of the system of this environment.

  With the help of the environmental recovery of Windows 7 or Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial142.html

  How to use system restore to log in Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765/