Questions after the BIOS updates and driver - place 11 pro

Similar Questions

• After the BIOS update DVD driver not reading not DVD - Sat A80

  Hello

  I have a Satellite A80-131 and after bios update (latest version 2.5) by windows update procedure, my DVD do not read DVD media more. It is possible to play CD but not a DVD media.

  Can I reinstall the old bios? Can I reinstall the firmware?

  Thank you
  Ronai Lisboa

  Hello

  Strange!
  On the Toshiba driver page, you will find also 2 Firmware updates.
  Check which drive you unit and try to update the firmware.
  Also try installing the DVD ram driver.

  PS: It is not possible to roll back the BIOS or install the first version of the BIOS on the device. Only the Toshiba service partner may DOWNGRADE the BIOS

• Unknow new device after the bios update and to install win 7 pro to the T400

  Hi all!

  My laptop: T400 2767-2JU. After the most recent update of the bios version (3.09) and own to install all the drivers in the Lenovo Site, I found an unknown device: Simple PCI communications controller. I don't think it's Thinkpad Modem, because, before updating the bios, the system does not have it.

  Please see my picture of capture: http://i92.photobucket.com/albums/l39/hoangnhat1613/T400-UnKnowDevice.jpg

  Someone help

  PS: Sorry for my English . Where to post the link to the image? All the drivers are installed

  I've seen it suggested that this (lists of mine such as serial Port PCI) device is Intel AMT / series on local network service.  Not useful for users and some utilities normally hides.

  Hardware ID Ven_8086 & DEV2A47

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T500-Intel-driver-missing/TD-p/102526;jsess...

• Questions about the BIOS update and battery charge on Satellite M30 104

  Hey,.
  I try to update my BIOS, but it does not work because my battery won't charge any more, if a window always tells me that my battery is not enough. Yet, the reason why I'm updating my BIOS is that I read in a forum that might solve my problem of battery charging.
  I'm fairly certain that the battery is not the problem itself: I bought a new battery, it worked for 10 minutes once or twice, then again the load stop completely.
  If anyone knows what the problem is or how to update my BIOS, please...

  Hello Celia

  I am not a technician, but as far as I know, BIOS has nothing to do with charging the battery. In my opinion, there are some problems with e-procurement (electronic load). Sorry, but I imagine that you must contact the partner in your country.

  They have diagnostic tools and it can be verified. Please call and simply explain the situation.

  Good luck!

• Satellite A300 - after the BIOS update I can not install two OS

  Hello everyone:

  I bought a laptop Toshiba Satellite A300-247 with Windows Vista Home Premium.

  Then I formatted it and divided the hard (320 GB) into 6 partitions and installed Windows Vista and Windows XP on drive C to drive D after having changed the SATA controller mode in the BIOS for compatibility. The computer worked well with 2 operating systems. However, when I updated the BIOS to version 1.9, two operating systems stop working and one of them can be installed: XP can be installed when SATA controller mode is placed on compatibility and Vista can be installed only when the SATA is changed to AHCI.

  Is there is no explanation of what past? And can I install operating systems 2 together again?

  Thank you

  Hello

  First of all, I doubt that this has something to do with the BIOS update. I think that after the BIOS update HARD drive mode has been changed from AHCI to compatibility and therefore the OS didn't start.

  Anyway, in compatibility mode you can install Vista and XP without the SATA drivers. This should t be a problem.

  But do you know the difference between compatibility and AHCI? AHCI mode is faster and therefore I would recommend this mode.
  Like you said Vista you can already install in AHCI mode and for XP, you need Intel Storage Manager. This package includes the SATA drivers you need and here is a step by step guide to use these drivers:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Last but not least, you can install 2 OS. You can do what you want! ;)

• Satellite A500-138 60 fps instead of 99 fps after the BIOS update.

  Hello!

  Before I have a little problem with my fan, but I do it with the BIOS update. His work!

  Now, I have a little problem of different...
  I am a player of counter-strike and before the BIOS update I have 99.9 FPS now, I have about 60... Who is wrong?

  Its make me crazy...

  Hello

  Seems the CPU and GPU don t run full implementation after the BIOS update.
  Any performance CPU/GPU leads to lower the heat dissipation and this means that the cooling module does not need to execute quickly and very often.

  Check to see if you can change an option is the BIOS.
  You can also try to update a graphics driver and could control Windows 7 power management.
  Power management settings 7 victory could affect CPU and GPU performance to save battery power and reduce the heat dissipation.

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

• Satellite L855 does not start after the BIOS update

  I downloaded the BIOS update and followed the instructions there during the installation, but on reboot (including the requested configuration), I get a blank screen. Intermittently, the CPU fan starts and stops. I think that the BIOS update failed, how to solve this problem?

  Thank you
  Neil.

  Hello, Neil

  In General when the BIOS is screwed up you need professional help and you should contact the nearest Toshiba service provider and ask for help.

  See also this thread. Perhaps this methid can help you too.

• Satellite P200 - after the BIOS update I can't start the machine

  After the BIOS update I can't boot the laptop because the system doesn't recognize the relecommunicarions password.

  Before updating the password is 0000.
  After when I try to set the password incorrect password start apeeras

  The BIOS password can only be removed from an authorized service provider. So I think that there is no other way.

  On the Toshiba site, you can search the nearest:
  http://EU.computers.Toshiba-Europe.com

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Z50-75, does not start after the bios update

  Hi all!

  I just baught Z50-75 with AMD FX7500, 8 GB of Ram and FreeDOS. I installed Windows Pro 8.1 and they shot a few drivers during the installation and I went to the view of Lenovo and downloaded all the rest (graphics, camera, etc.), after each installation the computer restarted normally and everything was OK The latest drivers I've seen on the site were originally from the BIOS and I downloaded those to and he started the installation, after which he said: "the system will now restart for the changes to take effect" and he did, but it wouldn't start after he did that show me this on the screen:

  And I tried both options (either with the Windows CD inside), but it just stays where it is, no effect.

  I can enter the bios and change the settings, but none of them seem to work because that's the maximum where it will go, the only difference is when I change from AHCI to compatibility mode, it restarts and I get a white screen, I have to use a button recovery to return to the image above...

  I appriciate any help kond, please give me some advice.

  Thanks for the reply!

  I solved the problem after updating the bios, communication between it and the disk hard drive had a few problems and is causing the boot problem. I solved with out the hard drive and install on another laptop, flashed the windows and installed the hard back in my Lenovo, and that worked.

  You tell the truth, I don't really know how it was the solution, but it worked, I guess that Flash just windows helped the hard disk to create the new connection to the bios, that the first was simply corrupted by an error during the update of the bios...

  Now, I know that the bios update is the last solution I'll never use, and of course, save all peace of data I had on the hard drive if possible.

• HP DV7-7259nr does not start after the BIOS update

  Hello

  I have a problem with my HP DV7-7259nr laptop, WIN8 running: it does not start after tune recommended to update BIOS and drivers.

  It downloaded all the drivers and started installing at one time, he asked for a reboot, click OK and the BIOS update has begun to load. The process ended successfully and after the reboot that my laptop wouldn't start; everything is black and the cooler is runing.

  I tried:

  -battery disconnected and power - button Power - plugged power again-> NOTHING

  -Windows key + B + Power button--> nothing

  Please help as this is the laptop I use daily in my work.

  Thank you

  If you install the electro mechanical original hard drive in it starts?

  If it has been delivered with a SSD?

  The specifications indicate that an electromechanical drive was part of the specification.

  

  This is where lies the UEFI environment. It is actually on the hard drive.

• Tecra 8000 does not start after the BIOS update

  From one day to the other does not start my Tecra 8000 (400 MHz/256 MB BIOS 9.30 for years). After start-up, the disc starts to turn, but the screen including the backlight remains completely black, without red logo TOSHIBA BIOS is not accessible.

  I got a new mainboard on stock, so I replaced it, and it worked. Unfortunately now my WLAN card now did not work properly. I tried several settings of the BIOS with no results, so I decided to do an update of the BIOS from 7.50 to 9: 30. After the upgrade, I get the message "ROM WRITE successful, utility completed. LEADER BIOS: Tecra8000 v 9,30 ". Because what either kept silent, I pressed the power button to restart and heard a long and many short beeps (endless). I could interrupt what pressing the powerbutton for 5s.

  After turning on again I have the same problem as described in the first line :-( I can't get into the BIOS, but I can again update (with pressed F12). Once again these beeps.

  What to do with these beeps after average BIOS update? I replaced the MoBo connector LED with pension. Processor, memory, keyboard and HD has remained the same. So, before I start disassembling the machine, please notify, your help is very appreciated.

  Hello Joachim

  I'm not a technician and don t know what the beeps but I am afraid that the BIOS chip is damaged. Because of this, the unit is completely dead. Sorry, but I really don t believe you can do anything. Maybe the new motherboard again :(

• Satellite A500 - it gets stuck one second after the BIOS update

  I knew I shouldn't update BIOS unless I have problems. A message came Toshiba Bulletin Board and I was stupid enough to trust him and I have updated my BIOS. The update has been successful, my computer seems to work very well.

  Except, now when I try to watch a movie, I downloaded every 10 seconds or if it gets stuck for a second and then plays normally and it happens when I play music on itunes. Because I didn't have this problem before, I'm not accusing the update. Is there a way I can go back or how can I return to normal?

  Oh God, what have I done? :(

  You can try to update a sound/display drivers on the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] Bios update should not cause a problem like yours, but who knows... (You can also try to load the default settings in the Bios)
  Updated version of itunes and try how movies on VLC and Kmplayer

• Satellite Pro A200 - question on the BIOS update

  I have a Satellite Pro A200 (PSAE7E) with Windows Vista and XP that have been installed recently.
  In the driver of Toshiba page (BIOS update) says:

  "This Bios is only compatible for portable computers with Windows Vista!"

  (1) should I update my BIOS (1.4) or it'll be a problem for my windows XP?

  (2) anyone has try?

  (3) is there documentation on the BIOS updates (bug fixes, etc.)?

  Hello

  I will try to be very short with answers:
  1. If you use Windows XP Home edition on your laptop have BIOS update with the version 5.30
  2 this version of BIOS is available for days and it is possible that many people already tried. By the way: until Toshiba out something that is tested and verified.
  3. Unfortunately there is documentation about bugs and patches, but the fact is that Toshiba has designed the 5.30 version to support the features of Windows XP Home edition on the models of laptops designed Vista

  Good bye