Questions about the BIOS update and battery charge on Satellite M30 104

Similar Questions

• Questions after the BIOS updates and driver - place 11 pro

  Hi all

  I am owner of a place of reference dell 11 7140 model 10 64-bit windows running and about 5 days ago I installed the latest drivers and the latest version of the BIOS using the automatic detection of the dell support page www.dell.com/.../drivers printer driver

  Since then, I met the two following questions:

  1: the automatic detection of the dell driver no longer works

  2: the system does not detect when a headset is connected, the audio always comes out the speakers Tablet - I reinstalled the latest drivers, but made no difference

  I wonder if anyone else has experienced those problems and what measures have you taken to solve problems.

  Thank you

  I managed to solve the problem with the audio: it was caused by an incorrect realtek driver installatiion, for some reason any 'Realtek Audio Manager' was not loaded when you start and that's why the system doesn't detect the status of the audio input jack.

  Always have the question of the automatic recognition of the driver, but at least I have a tablet of new work!

• Re: Question about the BIOS update

  Hello

  just tried to install the latest updates of BIOS (Vista laptop on my Equim) and am getting error messages saying: I have the wrong ROM? Tried to use bothe the 32 and 64 bit ones.
  Any suggestions...?

  Ta
  Nick

  This is the error that I got when I tried to apply the update after reinstalling my Satellite Pro P200 last weekend. I remembered that I applied the update, a week earlier, thus interpreted the message in this sense that the ROMA had already been flashed with the new BIOS format.

• Question about the BIOS on the Satellite 4340

  As amathor, just a question:

  I have idea to boot from a USB drive (as bootable), but the problem in the BIOS is:
  No USB - HDD or USB - FDD, USB Legacy or something like that.

  On the net I found a support:
  -to take a USB stick to start UPDATING the necessary BIOS!

  Or another way?

  And to make the BIOS update it's complikation work?

  Thanks for your interest

  Hello

  could you please show me the site where you found that information that you can boot from USB on a Satellite 4340 after the upgrade of the BIOS. In my view, this is IMPOSSIBLE since this machine is too old and the cams to USB boot first option with the Pentium M based machines, but before... NO LUCK.

  If you like show me this site/forum/it either where it is written that you can use a USB device to boot from it and I'll try to help you verify that the information you gave is correct...

  :)

  Welcome them

• Satellite Pro A200 - question on the BIOS update

  I have a Satellite Pro A200 (PSAE7E) with Windows Vista and XP that have been installed recently.
  In the driver of Toshiba page (BIOS update) says:

  "This Bios is only compatible for portable computers with Windows Vista!"

  (1) should I update my BIOS (1.4) or it'll be a problem for my windows XP?

  (2) anyone has try?

  (3) is there documentation on the BIOS updates (bug fixes, etc.)?

  Hello

  I will try to be very short with answers:
  1. If you use Windows XP Home edition on your laptop have BIOS update with the version 5.30
  2 this version of BIOS is available for days and it is possible that many people already tried. By the way: until Toshiba out something that is tested and verified.
  3. Unfortunately there is documentation about bugs and patches, but the fact is that Toshiba has designed the 5.30 version to support the features of Windows XP Home edition on the models of laptops designed Vista

  Good bye

• Question about the database update for Vsphere 4.1 to 5.1

  Hello

  We are about to upgrade our environment vsphere 4.1 and 5.1. I have a question regarding the upgrade of the vcenter server. Today, we have installed SQL SERVER 2005 Express database and what I get when I run the setup I will be invited to install 2008 r2 express or use the existing database. I guess I picked the new installation 2008 r2 express database? This will keep my DB inventory and just install the new DB SSO and tables?

  I read that you need to run som aswell from the installation CD SQL queries but are - that if you choose the existing database?

  hope you understand

  If you are doing a new installation of 51u1/5.1, the DB that is installed is 2k8R2 express... However, on the update from versions 4.x 2 k 5 db is preserved.

  Concerning

  Girish

• HP Pavilion dv4-1120br: doubts about the BIOS update for my model with the operating system current instaled.

  Hello

  I have a HP Pavilion dv4-1120br, I know that this model of HP laptop is old, but I instaled the 64 bit of Windows 10 on my machine and saw that my BIOS is version F.30 and the last of them available on the site of HP F.66 has.

  The problem is that this model is not suport for Windows 10 because, as I said, is too old. Can I download and run the update of the BIOS for Windows 7 64-bit available in the Web site, or I need to downgrade my OS to Windows 7, update the BIOS and then pass it back to Windows 10?

  Thanks for the help!

  Cantarino

  Hello;
  
  Let me welcome you on the HP forums!
  
  Your second proposal is correct - as the updates to the BIOS on the HP site are specific to the OS version and if you try to run one for Win7 in Win10, it will refuse to run.

  Good luck

• Satellite M40 - question on the BIOS update

  Hello

  I need to update my BIOS to be able to use a new stick of ram to 2 GB. Unfortunately I can't find an update of the specific BIOS on Toshiba website for the 265 M40, WXP with ATI graphics card.
  Which one should I install? M70, M100, 3.00, or 1.70, psm01, psm02...?

  Thank you

  Satellite M40 can grow up to 2 GB of RAM, and to do that you need BIOS update memory vivid but compatible modules.
  Toshiba recommended 2 PC2700 X 1024 MB (PA3313U-2M1G).

  What 2 GB module you want to use?

  That's all!

• Question about the Bios Tecra 8100 2.5

  Hello
  I installed the latest version of the Bios on my tecra 8100. My Question is, what is the maximum size of hard drive for these phones? Now I have 13 GB hard drive, but I want to have a bigger. And 512 MB of Ram is the maximum, right (2x256mb)? Can I adjust the size of the videoram?

  In my view, the tecra 8100 is a laptop very well.

  Greetings,
  Stephan

  Hi Stephan

  You are absolutely right. 512 MB of RAM is max for this pretty portable. If you want to buy more RAM I will suggest you that a PC100 256 MB (PA3051U-1NME). This RAM is tested and working properly with your device.

  Sorry, but video RAM is not possible to extend. And now something on the HARD drive. Unfortunately there is no documents where you can find information like this, but I know very well that here should not be a problem with 30 or 40 GB of HARD drive.

  I wish you lots of fun with this laptop old but nice.

• Question about the BIOS on the 4000CDS Satellite?

  Hello

  I bought a Toshiba 4000CDS a few weeks ago, when I start my laptop, I see:

  In touch with tomorrow

  Toshiba

  2 seconds after I need to enter a password to continue from win98. I don't know how to remove this password, and how do I access the bios. I tried F1, F2, F10, Del, Esc.
  Can someone help me?

  Thank you

  Hi kaffka

  I don't know Mr. what BIOS has the machine.
  As far as I know there are 3 options to enter the BIOS.

  1. portable computers equipped with Toshiba BIOS: you must press the ESC key shortly after the turn.

  2 laptops equipped with Phoenix BIOS: you must press the F2 key shortly after the turn.

  3 books (Satellite 5xxx series) with the BIOS through Windows Update:
  You can just press ESC after pressing the power, and then press the F1 key, this procedure sets the BIOS with the default settings!

  Best regards

• I'm confused about the BIOS update

  I learned by Tempo to download a new BIOS.
  Done that and unziped it.

  The help page for the BIOS of the laptop tells me to run the *.exe file to run the program in the windows environment.

  Problem: there is no exe.
  The zip is 20080311101712

  If I try to run the help file it tells me that it does not work on Vista.

  Concerning
  Viv

  OK tempo has been notified of the new version of the BIOS but it s really need to update the BIOS of your laptop? Is something wrong with the update?

  If this isn't the case, then update the BIOS is not necessary!

• Question about the BIOS upgrade for Windows

  I tried to update my BIOS M200 of 1,20 to 1,80 using the Windows version. Error is telling me that I am not an authorized user. I am local and all administrator requirements ar fullfilled readme.
  What can be the problem? I don't want to use the upgrade disk.
  Thank you
  T

  Hello

  As far as I know you can only update the BIOS with the compatible reader.
  Check this Toshiba document which drives are compatible
  http://support.toshiba-tro.de/KB/40/TSB4800R70001R01.htm

  On the procedures of recovery on different units:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000000b07

  Good bye

• The KitKat update and battery drain

  I have searched on the internet and have not seen this problem yet with 7 from Dell venue.  Everyone knows of this update battery drain?  My Android operating system is sucking the life out of my battery since the big update.  I'm writing this, my battery is in and out of fashion "sleep" for a little more than 10 hours with the Android OS operating at 56 percent and I have 19 percent autonomy left.  It wasn't the situation that prevailed before the update; I could leave it on various applications throughout the day running and still have a lot of battery life left.  What can I do to improve the life of the battery?  I look forward to your comments and suggestions.

  Have you tried to close your Tablet and restart?  I stopped and restarted, it 2 days ago, and it worked like a charm for me!  My tablet is in mode 'sleep' for nearly 24 hours, and after playing a few games, I still have the battery of 82%.  The Android operating system has used 8%...a far away from what I had originally experimented with the update.

• Unknow new device after the bios update and to install win 7 pro to the T400

  Hi all!

  My laptop: T400 2767-2JU. After the most recent update of the bios version (3.09) and own to install all the drivers in the Lenovo Site, I found an unknown device: Simple PCI communications controller. I don't think it's Thinkpad Modem, because, before updating the bios, the system does not have it.

  Please see my picture of capture: http://i92.photobucket.com/albums/l39/hoangnhat1613/T400-UnKnowDevice.jpg

  Someone help

  PS: Sorry for my English . Where to post the link to the image? All the drivers are installed

  I've seen it suggested that this (lists of mine such as serial Port PCI) device is Intel AMT / series on local network service.  Not useful for users and some utilities normally hides.

  Hardware ID Ven_8086 & DEV2A47

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T500-Intel-driver-missing/TD-p/102526;jsess...

• Question about the composition settings and make

  I looked for an answer to my question, but had to ask at resort, sorry, it's pretty basic, but a direct response is needed I think.

  I imported a project in Premiere pro with two layers of still images with movement and applied effects. I work for a few weeks now, with variations on these pictures and had many number of exports of EI through the render queue.

  After you import the compositions of first CC my starting point; composition and other settings of composition parameters are all resolved HDTV 1080 25 but the set resolution in which I unfortunately now has, is defined as 'Half' (960 * 540)... New compositions also sets the default resolution somehow half...

  My question is about my previous exports and subsequently.  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module? So far, all my renders are 1080 p by default and no 960 * 540. These have been uprezed to 1080 of 960? ... - I have not changed any setting on the resolution in the rendering module - they all came out 1080 after.

  Thank you

  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module?

  N ° except if you change the settings of default rendering, which is "Best settings" in "current Configuration".