Questions of NFS mount points

Similar Questions

• How to create a mount point on the esx host?

  When I try to add a DTX200 with option NFS, invited to say "a mount point must be created on the host computer before being added as a data store.

  2 questions:

  (1) how to create a mount point?

  (2) how do I know the NFS Server works well and can be mounted by the host?

  Thanks in advance.

  Export of the sample:

  / flight/vol6/nfs_006 - sec = sys, rw = esx001:esx002 root = esx001:esx002, nosuid

  Host names must resolve to the VMKernel interfaces that you use for storage (DNS - otherwise specify IPs above)

• T2p scripts fail on NFS mounts

  Hello IDM gurus!

  I'm trying to implement a multi data center (MDC) implementation of OAM 11gR2Ps3. 1 data center is in place and functioning as expected. We try to use T2P scripts described in the documentation of the OAM following MDC to clone the binary (copyBinary.sh) but you see the error message

  Error message: 1

  November 17, 2015 18:46:48 - ERROR - CLONE-20435 some Oracle homes are excluded during the copy operation.

  November 17, 2015 18:46:48 - CAUSE - CLONE-20435 following Oracle homes have been excluded during the copy operation.

  [/ data/Oracle/OAM/.snapshot/daily.2015-11-13_0010/oracle_common, data/Oracle/OAM/.snapshot/daily.2015-11-13_0010/oracle_bip, data/Oracle/OAM/.snapshot/daily.2015-11-13_0010/Oracle_IDM1, data/Oracle/OAM/.snapshot/daily.2015-11-14_0010/oracle_common, data/Oracle/OAM/.snapshot/daily.2015-11-14_0010/oracle_bip, data/Oracle/OAM/.snapshot/daily.2015-11-14_0010/Oracle_IDM1, data/Oracle/OAM/.snapshot/daily.2015-11-15_0010/oracle_common, /data/Oracle/OAM/.snapshot/daily.2015-11-15_0010/oracle_bip] data/Oracle/OAM/.snapshot/daily.2015-11-15_0010/Oracle_IDM1, data/Oracle/OAM/.snapshot/daily.2015-11-16_0010/oracle_common, data/Oracle/OAM/.snapshot/daily.2015-11-16_0010/oracle_bip, data/Oracle/OAM/.snapshot/daily.2015-11-16_0010/Oracle_IDM1, data/Oracle/OAM/.snapshot/daily.2015-11-17_0010/oracle_common, data/Oracle/OAM/.snapshot/daily.2015-11-17_0010/oracle_bip, data/Oracle/OAM/.snapshot/daily.2015-11-17_0010/Oracle_IDM1, /data/Oracle/OAM/.snapshot/daily.2015-11-11_0010/oracle_common /data/Oracle/OAM/.snapshot/daily.2015-11-11_0010/oracle_bip [, data/Oracle/OAM/.snapshot/daily.2015-11-11_0010/Oracle_IDM1, data/Oracle/OAM/.snapshot/daily.2015-11-12_0010/oracle_common, data/Oracle/OAM/.snapshot/daily.2015-11-12_0010/oracle_bip, data/Oracle/OAM/.snapshot/daily.2015-11-12_0010/Oracle_IDM1], and the possible causes are:

  1. all Oracle homes were not registered with an OraInventory.

  2 if all the Oracle homes have been saved with a unique custom OraInventory, pointer file corresponding inventory received no T2P operation.

  3 canonical path to the Oracle Home recorded with OraInventory was not child Middleware House.

  November 17, 2015 18:46:48 - ACTION - CLONE - 20435. be sure that all causes possible, listed in the CAUSE section are supported.

  
  

  .Snapshot in the error message file is a NFS function because it mounts are actually NFS volumes.

  
  

  Are the T2P scripts supported on NFS mounts? If so, how to solve this problem? Would appreciate your comments on how we can solve this problem

  
  

  Concerning

  
  

  Shiva
  

  The issue was due to wrong settings for the frames. This has been fixed by the storage team. T2P scripts were always initially and after that correction of the Storage mounts, they ran successfully. A restoration was necessary, and RCU patterns had to be recreated on the clone

• How to recover missing the mounting point on the standby server

  Environment: Oracle 11.2.0.3 EE on Solaris

  
  

  I have a Production database with a physical standby created and run in our remote data center and this configuration worked well for several years.

  
  

  Recently, I had 2 two new mount points, added to the Production Server but unfortunately do not have their created on the standby server.  I did not remapped mounting points, so the layout is identical between the Production and standby.  At least it was.

  
  

  I created several new data files on the Production Server using the new mount points.

  
  

  Once I realized my mistake, I had additional mounting points created on the standby server.

  
  

  I STANDBY_FILE_MANAGEMENT = AUTO on the day before, but obviously the new data file was not created since mount points were not available when they were added in the Production.

  
  

  Without the mount points and therefore the new data files, on the eve, archive logs are not applied on the day before.  There are currently about 150 newspapers that must be applied.
  

  
  

  Question: Can I copy the files of existing data from the Production Server to the standby server and Data Guard will know which archives newspapers must be applied to standby data files to bring them current with the files of Production data?

  
  

  If this is not the case, how can I get the new data files created on the eve and a return to synchronization with the Production?

  
  

  Thanks a lot for your help!

  
  

  -gary

  Once the mount points are created on the eve, manually resume the managed recovery. The day before would have abandoned managed recovery so you don't have to make it work again. The transaction that has been reproduced that requires mount points should not proceed. Given enough time, the wait will catch up to where it should be. If it's not fast enough, then use RMAN to roll forward the day before as indicated in a previous answer.

  > Can I copy the existing data files on the Production Server to the standby server

  N ° you can not do this.

  See you soon,.
  Brian

• After Effects does not open error message citing "mount point list is empty.

  After Effects does not open error message citing "mount point list is empty.

  FAQ: Should what information I provide when you ask a question on this forum?

• Mount point is often decreases

  Hello
  
  The database of the mountpoint in the following oracle E-Buiseness reduce two days once.
  I cross checked with the trace file, it generated normally & also I stored archives logs files in separate mount point.
  
  Nicely, someone guide me to this question.
  
  Thanks and greetings
  Mathilde

  Kesavan G wrote:
  Hello

  In the file that is often increased inside the ORACLE_HOME/appsutil/clone is jre_BAK_1368999014405 and it is a directory.

  Inside the jre_BAK_1368999014405 this directory files and subdirectories are:

  direcories are: bin, lib, man, javaws, plugin

  the files are: right of AUTHOR, LICENSE, README, THIRDPARTYLICENSEREADME.txt, www

  Every day at least four or five directories like jre_BAK_1368999014405 are generated.

  Each directory size is more or less 100 MB.

  kindly guide me.

  Concerning
  Guillas.

  The jre_BAK_ * can be removed without problems - which are Jre_BAK_ * directories used for? [1143395.1 ID]

  Thank you
  Hussein

• Instance of A database clone on a different mount point.

  Hello Gurs,
  
  I need your help I need to clone a 11.1.0.7 instance of database on a NEW mounting point on the same host. The host is a HP - UX box and my question is that I need to install the oracle database software in the new mount point and then clone? or cloning until this NEW MOUNT itself will create all the necessary software? Of Please provide me with all the documents that will be useful for the process.
  
  Thanks in advance.

  RMAN would connect to the database if you specify the sys user specifying the user name.
  In the command that you used

  "" RMAN > target PRODY auxiliary / ".

  Default RMAN connects to the PRODY database with the sys user.

  As said earilier, to resolve the problem you are experiencing, use the connection strings when connecting your databases if there is more than one instance running on the same computer.

  882065 wrote:
  I have a small question here-->

  What is the difference between:
  $rman auxiliary sys/***@prody target.
  AND
  $rman target auxiliary prody.

  $rman auxiliary sys/***@prody target.
  In the command above rman attempts to connect the target database with the sys user name and the password for the sys. Also you try to connect to the database using the connection string 'prody"that is mentioned in the tnsnames.ora file. For the above command works, you should set the ORACLE_SID to auxiliary database and use it later.

  $rman target auxiliary prody.
  In the above command, rman connects to the target "prody" with the sys user database and later ask the password for the sys user. When connecting to the "auxiliary / ', it assumes you are trying to connect to the same database (prody) and therefore again connects to the prody database."

• Size of the VCB proxy mount point?

  We are looking to integrate VCB with HP Server 6.0 the VCB proxy host will have hosted on the San storage, I need to save about 2.6 TB of data vmfs by night. We want to not backup of the virtual machine at the level of the image to the facility.

  My question is: should my proxy server VCB a mount point of 2.6 TB, or does only need a larger size of the VM mount point?

  It depends on how you plan your backups. VCB backup will copy the VMDK file in the staging area of the VCB then as backup. If you save just a VMDK in time then there must be enough space to hold the largest VMDK. If you are running backups obvisouly Parallels, there should be enough space to contain all the VMDK files to backup at any time

• Installer ask mount point?

  I try to install on a MacBook Pro 13 "Yosemite, but it asks for: "a disk with a mount point is needed"

  Can someone tell me what it is? I formatted the HDD MBP and have an external drive with Yosemite and a Flash DRIVE with the software to install.

  Help, please.

  Logan_VII wrote:

  I formatted the HDD MBP and have an external drive with Yosemite and a Flash DRIVE with the software to install.

  It is unclear where you try to install Yosemite.

  Open the DiskUtility to see if your external hard drive is recognized, you can force mount the drive in the menu drop-down

  DiskUtility > file > install

• I have an error: a drive with a mount point is required - what it means?

  I have an error: a drive with a mount point is required - what it means?

  Please explain EXACTLY what you were doing before this message appears.

• Mount point of the external SD card

  The SD card works obviously, since I updated to 4.1

  I can't find the volume with Windows Explorer ARE. What is the path to the external sd card?

  Link to image

  Moderator comment: images > 50 KB converted for programming. Community rules.

  This clarifies the paths:

  The mount points are:

  / Import/Storage/sdcard0 /.

  / Import/Storage/sdcard1 /.

  /SDCard and /sdcard2 are aliases.

  Link to image

  To mount all readers with davdrive, just change the path in /sdcard davdrive to.

  Moderator comment: images > 50 KB converted for programming. Community rules.

• Disk monitor mount points

  Is there a way to monitor the disk mount points in Big Brother (Windows Server). Do we need an external script?

  Should be an external script, a drive letter may be assigned to this mount point, but it defeats the purpose of using start with a mount point

• NFS mounts persist?

  Hi all

  I've updated to Win 7 Enterprise for NFS support.

  I was able to map two NFS shares successfully.

  However, upon restart, the actions are lost. Is it possible (I don't see one in the snap-snap-in mmc NFS) to indicate that they be reconnected at logon. I could use a login script in local GPO to do this, but I was wondering if there was a "better way" (tm).

  A tip for those who struggle with the NFS client: use showmount to see if Windows can even see the actions. I had to set the firewall issues, then showmount showed stocks and I was able to login and navigate through the:

  Server EI C:\Users\owner>showmount
  Export the server list:
  /nfs4exports 192.168.x.0/24
  RAID 192.168.x.0/24/nfs4exports.
  mythstorage 192.168.x.0/24/nfs4exports.

  C:\Users\owner>mount server: / nfs4exports/z: raid
  z: is now connected to the server: / nfs4exports/raid

  The command completed successfully.

  C:\Users\owner >

  Found the answer on the technet site (it's sort of, a persistent systemic mount is not possible, but using a user login script is possible.)

  Basically NFS connections are stored on a basis by user.

  "NFS mounted drive letters are specific session so running this in a script to start most likely will not work." The service would probably need to mount its own drive letters from a script that runs in the context of service. We have specific guidelines, that it is not recommended to http://support.microsoft.com/kb/180362. "

• Is a brush "stylus" in preparation? I'd like to be able to mounting points on some things. I love the app, but I just want more. Please tell me that 'more' is in preparation.

  Is a brush "stylus" in preparation? I'd like to be able to mounting points on some things. I love the app, but I just want more. Please tell me that 'more' is in preparation.

  Hi Amy,

  I do not know. This is a feature requested for sure, but I have not heard whether she could make its way into Draw. I will certainly pass you your comments along to the team produced however.

  Sue.

• vCenter for protection SQL Server Heartbeat mount points

  Asking if anyone out there knows if vCenter Heartbeat (6.6) supports SQL Server installed on the mounting Points, this installation of HB is to protect the DB SQL vCenter.

  The file system has a provision when the directory of newspapers and directory bin ect are each on a mount point in the same volume of index (g) (for example diskpart: ASSIGN MOUNT G:\SQL55_BIN)

  I get this error when you start replication, and replication does not start.

  Automated Replication Stop Applied : Use of Invalid Reparse Point / Microsoft Mount Point has been detected for the file / directory : G:\SQL55_BIN
  As a result of this, VMware vCenter Server Heartbeat has been stopped with the protected applications left running.
  

  Have not been able to find this error on the googleplex and no reference to the doco on the mount points...

  I know that the end of his LIFE, but I'm not the decision maker and happy not to do.

  Clues?

  FYI,.

  mount points is not supported