Questions OR MAX

Similar Questions

• HP 250 g1: Question about max ram mhz to hp 250 g1?

  Hello I have a g1 hp250

  the specifications are:

  Processor type: Mobile DualCore Intel Core i5 - 3230M, 3200 MHz (32 x 100)

  Display: Graphics Intel HD 4000

  RAM: DDR3 SDRAM 4 G at 1600 mhz

  North Bridge: Intel Ivy Bridge-MB BMI

  Phones: hp1854

  My question is:

  I want to upgrade my ram, but I'm confused my specs say that my max ram is 8g at 1600 mhz,

  AIDA64 extreme version say my max ram is 16 g at 1866 mhz

  (Maximum memory amount 16 GB, taking in charge of the Types of memory DDR3-1066 SDRAM DDR3-1333, DDR3-1600, DDR3-1866)

  What is true.

  Thanks in advance for your time and help

  Hello

  Its specifications:

  MEMORY
  Standard
  DDR3 (1600 MHz) SDRAM or DDR3 SDRAM / 3L (1600 MHz)
  Two SODIMM slots supporting memory dual channel
  Standard memory up to 6144 MB
  Maximum
  Upgradeable to 8192 MB with option 2048/4096 MB SODIMM in slots 1 and 2
  Two-channel
  Maximized dual channel performance requires SODIMM of the same size and speed in the two memory slots.

  More information: http://www8.hp.com/h20195/v2/getpdf.aspx/c04111387.pdf?ver=5

  Please use the following site to scan your machine. It will tell you exactly what you need and where to buy, or you can also use the information to buy elsewhere:

  http://www.crucial.com/USA/en/systemscanner

  Kind regards.

• If anyone can help with a brush QUESTION! Maxed out at 5000 size but still weak against document

  I have my smoke brush maxed out at 5000 in size and it is still tiny against the document. I called every number, try chat support and already posted this question once here and I can't get help. I don't know how to make this larger brush against the document canvas.

  Your view all zoom out everything is small when discovered 0.7% of the size. Use view actual pixels and it will be so large, that it does not fit on your screen.

• Satellite L50 - A - 1 5 - question about max LAN speed

  Qualcomm-Atheros AR8171/8175 PCI - E Gigabit Ethernet Controller (NDIS 6.30)

  In the specifications it is said that this network adapter might work on the speed of the LAN 1 Gbps 1000base-t.
  But the max speed that is displayed on my system is 10BASE-T/100BASE-TX.
  Why?

  System: _
  Toshiba Satellite L50 - A - 1-5
  Windows OS 8.1
  Driver version 2.1.0.21
  Qualcomm-Atheros AR8171/8175 PCI - E Gigabit Ethernet Controller (NDIS 6.30)

  You're right, the network adapter. Atheros QCA8171B supports networks: 1000BASE-T/100Base-TX/10Base-T

  To use the range, the router should also support the 1000BASE-T.
  Did you check that?

  In addition, you can change the LAN settings in:
  Device Manager-> LAN card-> properties-> Advanced tab

  Here, you should check if 1000BASE-T option is selected and chosen.

  I also recommend you check the BIOS settings because as fat I know some LAN function can be enable/disable in the BIOS

• scanning question (Min, Max and Min return)

  I have a tunable laser that is supposed to make a sweep of the Min to Max and then back to min.

  For some reason, it seems to be an additional step after the peak wavelength as shown below.

  Strange is that it seems to happen only when I put a wavelength that has 1 decimal place or 4 decimals.

  I'm relatively new to labVIEW, Please HELP? any advice would be helpful.

  

  

  

  

  This looks like a problem of accuracy point.  Each language beats in it.

  What you need to do is to calculate how many steps to the top must be made and then make comparisons on the step number (an integer).

  Also, why use the node formula?  A structure matter would take care of the logic.

• Min/Max Questions about VCP5?

  I passed my VCP4 exam last year and plan the VCP5 next week. I took the who's 5.0 new course so we're ready to go. For all of you who have RECENTLY taken their VCP5 review, I have a few questions:

  1. some practice tests and study guides still have a lot of questions min/max and, of course, they do not mention if they are maximum for 4.1, 5.0 or 5.1 - it's really bad try to keep all this directly when the questions are broad. It has spent a lot on my VCP4 exam and it's maddening. So are they min/max on VCP5 issues and what version they relate?

  2 - advice on the differences on VCP4 vs VCP5? What categories are more focused on? The examination plan is wide enough for a review more "basic", this is a little crazy.

  3 - I found the VCP4 extremely difficult, even after MONTHS of constant study. Good news for VCP5?

  Thanks in advance.

  (1) Mmin/max questions aren't as much of a focus - you will not get a question asking specifically what min/max but that may be a component of a question - the VCP exam will always carry the recent version - so assume the VCP5 will be 5.1

  (2) the review of VCP is NOT a review of base - it is intended to test the range of the VMware product knowledge - so be prepared to meet with anythin that is covered in the action plan.

  (3) plan on the VCP5 to be as difficult - the only good news is questions are similar in syntax to the VCP4 so you know what to expect now

• Max nested levels reached on item with RemoteObject

  Hello:

  We have an application that uses RemoteObject (with AMFPHP) connections to send a custom PHP class object. This object has several levels deep, with objects nested inside the main one. We have noticed that, after having reached a certain level, the RemoteObject accidents serialization throw this error:

  TypeError: Error #1034: Type coercion failed: cannot convert Object@7e30f89 to mx.messaging.messages.IMessage.

  We tried to send a lighter object, without property, just nested levels. The same thing happens. In the example:

  var params:Object = {};
  params['test'] = {0:{1:{2:{3:{4:{5:{6:{7:{8:{9:{10:{11:{12:{13:{14:{15:{16:{17:{18:{19:{20:{21:{22:{}}}}}}}}}}}}}}}}}}}}}}}};
  remoteObject.runService(params);
  

  If the object has fewer levels, it works:

  params['test'] = {0:{1:{2:{3:{4:{5:{6:{7:{8:{9:{10:{11:{12:{13:{14:{15:{16:{17:{18:{19:{20:{21:{}}}}}}}}}}}}}}}}}}}}}}};
  

  So, it seems that the RemoteObject has a maximum depth of 24 levels? Maybe 23, I m do not know. Sending in JSON is not an option, because I lost all the typed classes and objects inside the main object.

  Can anyone provide a good approach to deal with this problem?

  Thanks in advance!

  Solved: http://stackoverflow.com/questions/22936444/max-nested-levels-reached-on-object-sent-with-remoteobject

• SHOCK: X 200 noise (no fan) with different power settings

  Machine very quiet in general. But finding a question important 30 min after my hands on it:

  When I switch the power Off timers for setting, I heard very loud noise of current electric, close to the battery (upper part of the keyboard). I thought it was something unique to 'Timers Off', but towers was not released. I saw occasional same question with "Max Performance" / / "Energy Saver" etc.

  It is NOT the power adapter. He SPRING of the machine itself. Is not related to what you use the speaker or headphones. No partner that you were using the adapter right battery or sector.

  BTW, I just opened the box and did the Windows updates. No related software. No matter which firmware questions here?

  Any comments?

  Thank you!

  With the help of Mark, Lenovo responded effectively to try to resolve the problem. The technician and I think it is the LCD inverter noise. However, at least the special inverter we replaced the former with does not seem to solve the problem of my day 2 experience after replacing...

  The machine works fine except for this standby failure noises, Hibernate slow Vista Vista and sometimes.

  The noise recorded using the built-in microphone is like that. It does not systematically refer to the a/c adapter / battery use. Regardless of the CPU, video, ram, HD use.
  https://netfiles.uiuc.edu/xzhuang2/shared/noiseafter_inverter_replacement.WMA

  UPDATE: with the help of Mark, Lenovo finally sent in a replacement machine. The new machine seems to be free of the noise of the ups, at least for now. I hope that it was only an isolated case. Thank you, Mark!

• Problem with the current SNA on the database pending...

  Hello;
  
  A day ago I went on our main database on the eve of database, everything went well. But today when I checked current SNA for the two database, I saw that the two were different. and current SNA did not change on the standby database. What can cause this problem?
  
  some exits here when I tried to find the problem...
  
  on the primary database.
  
  

  SQL> select thread#, max(sequence#) from v$archived_log group by thread#;       
     THREAD# MAX(SEQUENCE#)
  ---------- --------------
           1            156 

  on the database pending;
  

  SQL> select thread#, max(sequence#) from v$archived_log  where applied='YES' group by thread#;
  
     THREAD# MAX(SEQUENCE#)
  ---------- --------------
           1            156 

  standby mode
  

  SQL> select LAST_CHANGE#, STATUS from V$STANDBY_LOG;
  
  LAST_CHANGE# STATUS
  ------------ ----------
       2927636 ACTIVE
             0 UNASSIGNED
             0 UNASSIGNED
             0 UNASSIGNED 

  standby mode
  

  SQL> select current_scn from v$database;
  
  CURRENT_SCN
  -----------
      2916773 

  on primary

  SQL> select current_scn from v$database;
  
  CURRENT_SCN
  -----------
      2927809

  Published by: Ecimen on 01:36 18.Eki.2012
  
  Published by: Ecimen on 01:47 18.Eki.2012

  SQL > change database recovery managed standby database disconnect from the session.

  modify the recovery of database managed standby database disconnect from the session
  *
  ERROR on line 1:
  ORA-01153: an incompatible media recovery is active
  >

  Most likely you had missed the log files from the backup site. You can check in question "select max(SEQUENCE#) from v$ loghist. Most likely old log files has not yet delivered to the main site backup site. Another simple method that you can do is stop tio watch db, and then start it as a mode of editing if you have 11 GR 2 db which should be enough. Oracle will automatically synchronized between primary and standby for you. If you can't wait, you can start the editing for db in waiting mode, then run the command "recover the database sleep until cancel;

• Trying to hide a column but the header reappear on the following pages

  Hi all

  Here is my little problem, I have a table, a bit normal. What I try to do is the following:

  I wish I could hide a full column based on the data. I was actually able to hide a column, but my problem is that when the table breaks into a second page, "header cell" on the second page of the column I hid reappear.

  Here's how I did my stash:

  -In table Initialize script, I check a condition, and if this condition is met, I'm hiding the header cell.

  If (Verif.name4_we.rawValue == "" or Verif.name4_we.isNull) then

  HeaderRow.Cell3.presence = "hidden".

  endif

  -For normal lines, I always check the same exact condition and if the condition is met, I hide the cell.

  If (data. Page1.test.Table1.Verif.name4_we. RawValue == ' ' or data. Page1.test.Table1.Verif.name4_we. IsNull) then

  .its presence $ = "hidden".

  endif

  This facility works pretty well if I only have one page:

  
  5 is my header name (I know it might be confusing, I'm sorry), it's page 1, column 6, and 7 are in fact hidden.

  It's what happens on the following pages:

  
  As you can see, only the header reappear, you can clearly see that the elements are still hidden, but because the header appear, it looks
  as there was a full column.

  Does anyone have an idea of what could be my problem?

  Thank you very much!
  Max

  Are you able to change the width of your columns?

  This is the last trip, I did:

  You must first, double-click the rule to open the palettes of drawing AIDS (or go into the top-> palettes-> drawing AIDS menu) and set the units to Points.

  You need tables and a structure, a table which will show real information and a structure that will be imported into your program with the correct width (column DialogResult.Cancel will have a value of 0.001 in the structure). The structure is hidden in the page layout.

  In your table initialize script, write something like this:

  Set the width of columns by using our structure.//Empty imported have a width of 0.001

  var width = Concat (data. Page1.struct.Col1, "pt."

  data. Page1.struct.col2, "pt."

  data. Page1.struct.col3, "pt."

  data. Page1.struct.COL4, "pt."

  data. Page1.struct.col5, "pt."

  data. Page1.struct.col6, "pt."

  data. Page1.struct.col7, "pt."

  data. Page1.struct.COL8, "pt."

  data. Page1.struct.col9, "pt."

  data. Page1.struct.col10, "pt")

  Table.columnWidths = width

  Explanation: You concatenate each rawValue of your table that contains the width of your columns with "pt" (the unit), in this way, you can set the widths of all columns in a single command (Table.columnWidths = width).

  This should resize the entire column, including the header. (It works on my side)

  Don't bother to ask if you have any other questions

  Max

• Meilhaus 3106 MAX/DAQ Assistant questions

  Hello

  While I'm sure that you all have grown tired of my usual throat-clearing, I'm a relatively inexperienced developer, so apologies in advance if this question is incomplete or missing otherwise.

  I recently got a Meilhaus electronic RedLab 3106 DAQ.  Box manual is at: http://www.meilhaus.org/downloadserver/redlab/manual/RedLab%203106_en.pdf

  Attempt to use this device after completing installation 'Quick Start', I discovered that the data acquisition was not read by MAX (v5.0). In addition, by attempting to use the DAQ Assistant, in LabVIEW 2011 for this box DAQ (which I did successfully on this machine with a DAQ USB of NOR-6008), I discovered that the device is not listed with the text "no taken physical channel supported" that appears when the registration of the channel would be generally.

  Normally, I try just a reinstall of the drivers/software 3106 package, but the strange thing is that Windows (XP - SP3) gives me the bubble 'New hardware found' when the USB fuelling the DAQ cable is connected to the computer. In addition, the acquisition of data can be read by a program that came with the acquisition of data called "InstaCal", including an order to make the power led on flashing box. Finally, a universal library, which also comes with the DAQ hardware has itself installed successfully in LabVIEW under "User Libraries". Given this feature, I am convinced that it is simply not possible to use the DAQ Assistant in LabVIEW for this particular data acquisition or that there is something in LabVIEW/MAX in need of fixing.

  Someone knows a problem similar to this with the 3rd party hardware (ideally, Meilhaus) and software of NOR? If so, how do fix you it?

  Kind regards

  MG Wilkinson

  Material acquisition of third-party data is not supposed to be detected by MAX or used with the DAQ Assistant. Thus, simply use the functions you provided.

• Max memory upgrade question

  What is memory addressable max for XP Home Edition?

  4 GB is the maximum taken in charge, 'accessible to your programs' lies between 2.5 and 3.75 GB - with all that above 3.25 GB being questionable.

  Though - most of the people who have Windows XP Home will probably never use even a 1 GB full - even with a shared memory video card.

  Another response of the community of Windows XP newsgroups

• Question of limit with oversubscription ACE, max &

  Hello

  I have a question about the following output:

  show serverfarm SFARM detail ...---------------------------------
                                                ----------connections-----------
       real                  weight state        current    total      failures
   ---+---------------------+------+------------+----------+----------+---------
   rserver: REAL_1
       10.0.0.1:80           8      MAXCONNS     10435      65590       130
         description          : -
         max-conns            : 10000
         min-conns            : 9950...

  There is a sticky source ip configured for serverfarm primary + backup serverfarm (not sticky). Do you know why we can see the current connections limit & max?

  The sticky for serverfarm primary could cause this problem?

  Kind regards

  Krzysztof

  Krzysztof salvation,

  Normally the current connection count is the number of ESTABLISHED + EMBRYONIC connections. So as soon as ACE sends the SYN, the current counter is incremented and if connecting, connection total counter is incremented or other failure.

  That said, I still think it should not present more than MAX-& limit unless Max-& is reserved to the ESTABLISHED.

  I suggest you open a TAC case to study it. He have a lot of questions related to these counters, which have all been cosmetic and had no real impact on the functionality of the device itself.

  Kind regards

  Kanwal

  Note: Please check if they are useful.

• Question about GROUP BY and double aggregation for example MAX (AVG (val))

  Good evening/morning,
  
  I am struggling with what is probably a simple problem.
  
  The objective of the exercise is to display the highest average earnings and his Department (with the EMP table).
  
  Easy to get the maximum average wage:
  

  select max(avg(sal)) as max_avg_sal
    from emp
   group by deptno;

  I could not figure out how to change this query to get the deptno associated AVG. max. Gave up on changing this query and came to this:
  

  select deptno,
         avg_sal as max_avg_sal
    from (
          select deptno,
                 avg(sal) as avg_sal
            from emp
           group by deptno
           --
           -- order causes 1st row to have the max(avg(sal))
           -- this will be exploited in the where of the outer query
           --
           order by avg_sal desc                                             
         )
   --
   -- get only the first row since that one has the values we want
   --
   where rownum <= 1;

  This works, but feels pretty disappointing compared to the simplicity of the first query (which I couldn't the deptno on.) That is the request more simple with that I could come.
  
  The QUESTION is:
  
  The query above is really the way simpler and easier to get the maximum average and its associated department number? If it isn't, I'm more interested in your simplest solution. :)
  
  Could someone to laugh at one of the alternatives that I came up with a "simpler": solution
  

  with x as
    (
     select deptno,
            avg(sal) as avg_sal
       from emp
      group by deptno
    ),
    max_avg_sal as
    (
     select max(avg_sal)                  as asmax
       from x
    ),
    deptno_max as
    (
     select deptno                        as dnmax
       from x where avg_sal = (select asmax from max_avg_sal)
    )
  select (select asmax from max_avg_sal) as max_avg_sal,
         (select dnmax from deptno_max)  as deptno_max
    from dual;

  The road to hell is simple, it is paved from selects < chuckle >,.
  
  Thank you for helping,
  
  John.

  Hello
  Try this

  SELECT MAX(AVG(sal)) AS max_avg_sal,
         MAX(DEPTNO) KEEP (DENSE_RANK FIRST ORDER BY AVG(SAL) DESC )  DEPTNO
  FROM scott.emp
  GROUP BY deptno
  

  Kind regards
  Anthony Alix

• Min - Max planning of simple questions

  Hello
  I try to use Min - Max planning. The user guide of the inventory indicating that Min - Max Plannig uses a request to assess the order quantity, but do not say if such request per month, year or whatever. Looking for the numbers seems to be the annual demand (but does not match my annual turnover). What kind of request is used?
  If demand is calculated on an annual basis, order quantity resulting should be to meet the sales of an entire year (I guess).
  Is it possible to change this? Does really matter?
  
  Please a few words of counsel
  Oscar

  OPR wrote:
  Hello
  I try to use Min - Max planning. The user guide of the inventory indicating that Min - Max Plannig uses a request to assess the order quantity, but do not say if such request per month, year or whatever. Looking for the numbers seems to be the annual demand (but does not match my annual turnover). What kind of request is used?

  Hi Oscar,.
  According to what level (organization or subinventory) you run mini-maxi planning and the options selected for the net demand will determine which will appear under the open request. Open total demand, or before the application deadline, a selection net demand for reserved and unreserved orders and ONGOING work. It is NOT a month, year or no matter what time.

  Min - Max at the organization level:
  If you choose Yes for net without reservation orders, booked net orders and request for net WIP then open application is the sum of full orders, inventory (including orders reserved) reservations, account question move commands and application component WIP scheduled for issue on or before the application deadline.

  Min - Max in the Subinventory level:
  If you choose Yes for orders without reserve Net and Net booked (without WIP request option here), then open the request matches the sum of reserves inventory (including reserved orders), account number move orders and transfer subinventory move orders to demand because of this subinventory or before the power demand
  Date. Reservations subinventory level inventory referencing a different subinventory, or with no specified subinventory, are not included.

  for example if the application deadline is June 30, 2009 and net options have been included as Yes and then he's going to pick up the order until June 30, 2009 (Note: some applications reports have part time question while comparing dates, so in these cases, 30 June 2009 is taken as 30 June 2009 00:00:00 i.e June 29, 2009 midnight!).

  Also if you specify a past date for the cut in demand date, that it would consider open requires available, if necessary, until this last date (but you plan for the future, not past).