questions to run ssh commands on hp OA

Similar Questions

• Insert variable/attribute in the SSH command?

  Does anyone know how to insert a variable/attribute in a SSH command for execution on a remote machine?

  Not directly with the workflow stock 'run SSH command '. If you look at the script of this workflow code, you will see that the string entered by the user entry control is passed directly to the run command.

  What you can try is to duplicate this workflow and add code to "twist" the input command string before passing it for execution. For example, you can consider a nice syntax placeholder for names of attribute such as % attr, you can replace it with the actual attribute name and then move the chain gave rise to eval().

  Therefore, if the user enters the following command string:

  some sample % attr1% command

  You need to convert to something like expression concatenating string to the following address (note the single quotes)

  "some examples" attr1 + "order."

  When you pass this expression to eval(), evaluate the real value of the string attribute attr1 and you'll get his command of actual string to run as SSH command.

• SSH command failure

  I jumped my way through all of the process of building a workflow (not particularly easy when you don't speak JavaScript ) and I'm on the one-yard line.  Last step in my workflow... before the 'End' of course... is to run a SSH command.  That's the problem: when I run the command as a stand-alone WF in the VRO client it works fine, no problem (success is indicated).  However, when I run the same command in the final stage of the workflow it throws a failure... Although the log output shows clearly succeeding.  Can anyone suggest why this is the case and what to do to correct it?

  EDIT

  In case it helps jog someone's memory, the grip seems to be the point 5.  As I said, the output everything seems OK, the error message is "SSH run command failed." "Reason: (workflow: run SSH command / assign (item5) #6)" this error message does not appear if/when I run the exact same canned WF by itself (However the TIME even trying to run against when I get the error).

  OK... so this is * very * weird, but I think that I thought about it.  When I was trying to get my workflow custom squared further than I was running the debugging, when I was testing the command SSH 'keeps' WF I was actually running it normally.  For some reason, that seems to be where is the problem.  As I wrote earlier, even in the course of debugging my SSH command worked OK, he just kept pitching on a mistake at the end (the newspaper showed the exit quite right, it's just that at the end... After you run the commands successfully and get an exit code 0... She kept any mistake).  The second, I ran my workflow custom normally rather than in debugging the error stopped.

  Anyone know why this might be?  Is there something specific to the SSH module which he does not play well with debug?

• SSH command orchestrator using SSH plugin

  I generated the pair of keys and also saved the public key on the host by using workflows in the SSH plugin. Now when I try to run a ssh command in the workflow, I see the following error:

  "Cannot run the command InternalError: SSH_MSG_DISCONNECT: 2 too many failures for root authentication (order workflow: run SSH / Execute SSH Command (item6) #16) (Workflow: run SSH command / Execute SSH Command (item6) #33).

  In addition, the session is created and I am able to see the session ID.

  Please help me solve this problem.

  Resolved-

  After a lot of trial and error, I found the solution.

  Generated SSH keys should be 1024 key size and the user name with which the keys are saved on the host can be used only to run commands as well.

• need help to run the perl script invoking ESX ssh command power CLI

  I tried with the VCLI function call, but my perl script does not work... If I want to download my script for ESX (not ESxi) perl file, then run the command that will display the value in the directory/tmp, then pull the output file in/tmp local VC no matter what directory

  something like this article using plink.exe http://communities.VMware.com/message/1260100#1260100

  comm and I want to run ""iam_extract_global.pl perl - customer < customer name > - /tmp/xxxxxx.mef outfile " "

  
  

  so I need pul /tmp/xxxxx.mef to the local directory
  

  Try to place the string values in the first 3 lines in quotes.

  $User = "root".
  $Pswd = "xxxxx".
  $ESXname = "xxxxxxx".

• Run the command in Start menu show sites and other files that I opened.

  I was typing letters in the menu run from the start menu ("Start" > "run" > "a, b, c, d, e, f, g, etc...) and I noticed that the Web sites I visited were stored there. This information is accessible by hackers or other intruders unwanted? I was checking to see if I could find my e: drive using the command run from the start menu when I noticed similar entries in the recent documents folder from the start menu. I forgot this shortcut in the past and by chance came across it accidentally. How to delete these lists. I've seen websites that need my e-mail and password. even if she had a lot of jibberish, some words were read by me at a superficial glance. What is a security breach? example: if I type only (a), then all files and websites beginning with a are displayed

  Hi Marc,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems in removing the story from the beginning, run the command. I'll be happy to help you in this problem.

  -What operating system is installed on your computer?

  Windows saves a history of the names of files, programs, and locations that you type in the Run dialog box. You can delete this history, which you can do if you use a public or shared computer.

  I suggest you follow the steps in the link to clear the history run in the start menu and check if it helps.

  Clear history run on the start menu

  http://Windows.Microsoft.com/en-us/Windows7/clear-the-run-history-on-the-start-menu

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Task Manager, regedit, run and command prompt are all disabled on my computer.

  Task Manager, regedit, run and command prompt are all disabled on my computer.  Is it possible to fix it because it allows to launch on a network?

  Hello
   
  (1) have tried to start in Safe Mode, Mode safe with network...?
  (2) remember to make changes to the computer before the question?
   
  See the methods mentioned below and check if that helps.
   
  Method 1:
  To start the computer in safe mode with networking
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
   
  Scan your computer for Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   
  Method 2:
  How to remove a computer virus?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-remove-a-computer-virus
   
  See also:
  Microsoft Security Essentials
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials
  Hope this information helps.

• Installed dictionary software (babylon 8), but I saw this message: "error 0 runs the command setup32.exe. How to solve this problem?

  Original title: error setup32.exe

  Hello. Thank you for your reading this question.

  I was installing a software dictionary (babylon 8), but I saw this message: "error 0 runs the command setup32.exe. Can you help me to solve this problem?

  Moved Windows 7 installation, set at level and activate Forum.

  Hello

  I changed the windows of my laptop and the problem has been resolved.

  Thank you very much.

• VMA new v6 Server Error (s) runs a command ESXCLI: connection failed. Digital fingerprint SHA1 of the server (not approved)

  New Server v6 of vMA. Added two new ESXi hosts v6 at the VMAs with no problems. When I change the target to one of these new hosts and try to run "esxcli system syslog recharge", I get the error: failed to connect . (Untrusted) Server SHA1 thumbprint [thumb print listed here] .

  Research tells me what to do if I get this error running and order ESXCLI on my PC, but nothing when it arrives at the VMAs.

  Any help is appreciated people - thank you!

  Me am I say - READ THE MANUAL/RELEASE NOTES

  vMA 6.0 Release Notes

  • ESXCLI command displays SSH fingerprint error

    When you run a command ESXCLI in each target ESX, footprint SSH error appears. Add the footprint against each target ESX using the credstore_admin.pl utility. Run the following command:

    /usr/lib/VMware-VCLI/apps/General/credstore_admin.pl add s ServerName> imprintt >

    where: servername is the name of target ESX and Thumbprint is the value that is received in error during the execution of the command esxcli .

    For example:

    VI-admin@sin2-Pek-esxplatdhcp156 :/> Add sin2-pek - esxplatdhcp211.eng.vmware.com - s /usr/lib/vmware-vcli/apps/general/credstore_admin.pl t E2:FA:96:09:FC:18:C8:19:07:3F:78:12:74:46:66:1E:C8:3 B: 84:8 C

    VI-admin@sin2-Pek-esxplatdhcp156 :/> /usr/lib/vmware-vcli/apps/general/credstore_admin.pl add s 10.111.8.211 t E2:FA:96:09:FC:18:C8:19:07:3F:78:12:74:46:66:1E:C8:3 B: 84:8 C

    This problem has been resolved in this release.

  All better.

• Run the command in the comments - vRO options?

  Hi, I am currently using vRo to run a script simple powercli with 'invoke-vmscript"to run a command at a prompt linux once it is supplied of vRA (it changes the hosts file). I'm looking for another method to do this, if someone could share their experience please.

  I thought to SSH could help, but I am dependent on having an IP address or the host name when I run the workflow. That is not the case that I need to wait for it to start, get address DHCP and save DNS.

  Does anyone have any suggestions how I could achieve? The PowerCLI works because I can do the name of the computer that went from vRA. However, the script does not work very cleanly and I would find that an alternative with vRO is possible.

  Thanks in advance for any advice

  Steve

  No problem

  Yes, you can easily run these commands with the vRO workflow.

  When you log on to your linux VM you can use the command "which" where the "command/program' is you want to run, so

  "what echo" showing you the executable you call is "/ bin/echo", while passwd is on centos for example "/ usr/bin/passwd.

  Tim

• WLST - do not run the command nmConnect() / Manager node becomes unreachabl

  Hello guys,.
  
  I am facing a few questions to set up certain configurations of an application I deployed on weblogic 10.3.3.0.
  
  One of the steps required to configure this application is open the WLST offline, run 2 commands:
  
  */BEA/mytrack/wlserver_10.3/common/bin/WLST.sh*
  
  Then I try to connect in the nodemanager:
  
  * wls: / offline > nmConnect ('admin30800', 'weblogic_password', port = '30801', domainName = 'track30800') *.
  
  Returns the following error:
  
  Connection to the node Manager...
  < July 13, 2011 2:23:45 PM CDT > < opinion > < security > < BEA-090898 > < without taking account of the approved CA 'CN is thawte Primary Root CA - G3, OR = (c) 2008 thawte\, Inc. - authorized only use, OR = Division Certification Service, O = thawte\, Inc., C = US ". Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. >
  < 13 July 2011 2:23:45 PM CDT > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 3, OU = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. >
  < 13 July 2011 2:23:45 PM CDT > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 2, OR = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. >
  < 13 July 2011 2:23:45 PM CDT > < opinion > < security > < BEA-090898 > < without taking account of the approved CA 'CN = GlobalSign, O = GlobalSign, OU = GlobalSign Root CA - R3. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. >
  "" < 13 July 2011 2:23:45 PM CDT > < opinion > < security > < BEA-090898 > < without taking account of the approved CA "OU = safety Communication RootCA2, O = SECOM Trust Systems CO.\,LTD.,C=JP. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. >
  < 13 July 2011 2:23:45 PM CDT > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = VeriSign universal Root Certification Authority, OR = (c) 2008 VeriSign\, Inc. - For authorized use only, OU = VeriSign Trust Network, O = VeriSign\, Inc., C = US ". Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. >
  < 13 July 2011 2:23:45 PM CDT > < opinion > < security > < BEA-090898 > < without taking account of the approved CA 'CN = AC KEYNECTIS ROOT, OU = ROOT, O is KEYNECTIS, C = EN ". Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. >
  < July 13, 2011 2:23:45 PM CDT > < opinion > < security > < BEA-090898 > < without taking account of the approved CA 'CN = GeoTrust Primary Certification Authority - G3, OR = (c) 2008 GeoTrust Inc. - only for authorized usage, O = GeoTrust Inc., C = US'. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. >
  Traceback (innermost last):
  Folder "system <>", line 1, in?
  File '< iostream >", line 123, in nmConnect
  File '< iostream >", line 646, in raiseWLSTException
  WLSTException: An error occurred when executing nmConnect: unable to connect to the Node Manager. : Access denied to the field 'track30800' for the user 'admin30800'
  
  
  I did some research and found this thread here: http://kr.forums.oracle.com/forums/thread.jspa?threadID=788163
  that solves the initial problem, but after I did the nmConnect and an storeUserConfig() order exit() the WLST, I restart the management node successfully, the node Manager becomes inaccessible.
  
  I used the console SMA WL and access-> appdomain-> environment-> machinery-> surveillance-> State of the node Manager to check the inaccessible State.
  
  
  
  Thanks in advance,
  
  Davinod

  Hi Davinod,

  This issue seems to occur due to the name of user and password credentials Manager node in the console using some unwanted username and password incorrect.

  Please, try the following to resolve this problem:
  1. change username and password console NodeManager NodeManager and put them as well as the credentials of username/password of domain name.
  2. restart the whole field, Nodemanager process after the change.

  Here is the procedure to change the user and password name Nodemanager console:
  1. connect to the WebLogic console--> click on Domain--> go to the Security tab and advanced options.
  2. change the identification information in the console for NodeManager username and password NodeManager, activate the changes.

  Thank you
  Cree

• How do you do the command prompt window stay open after running a command?

  OK, I feel stupid asking this, because I knew the answer before. I learn Visual C++ programming. The book I learn to write C++ and past then in details on the writing of the GUI from Visual C++ part. The book that I market me through compilation and to make an exe file in a cpp file, and then he said: go to the directory in Explorer and double click on the exe file. I do, and the command prompt appears a quick second before closing down. The example in the book shows the output, and the writer obviously has his guest configured to pause after executing an exe file.

  I just set up my guest to do the same thing, so I can at least see the results. I know that running the exe I wrote, but I would like to see the output for less than a second.

  I don't know how you code this. But if it's like a normal batch or whatever it is command line related.

  Follow these steps to use a switch defined by the user at the end of the script.

  To pause a file of DOS commands under Windows XP, continue to the next command, you can use the PAUSE command. Make request to the user with the text:

  Press any key to continue. . .

  Then the batch file is waiting for the user to press a button. However, if you want to pause a batch file and display anything? Simply redirect the results to no one as follows:

  pause > null

  Given that it is perhaps not very useful (how will the user know they need to press a key to continue the batch file?) you display a different prompt. Issue a command with your desired guest ECHO, and then issue the break preceding > no command.

  For example, to pause a batch file of Windows XP with the prompt "Press ENTER to run the command", use the following commands:

  echo press ENTER to run the command
  pause > null
  MCP. MCDST. LVL 80

• Is it possible to run the command script with user account administrator rights?

  Is it possible to run the command script with administrator user account rights means please tell me how to...

  I need to run it in windows 7 professional service pack 1.

  There are a few myths that won't go away, for example

  • You can perform administrative tasks when you are working from a command prompt.
  • A script (batch file, VBScript, PowerShell) gives you administrative rights.

  There is no substance to a myth. Your account has administrator privileges, or it does not. There is no backdoor.

• Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Hello

  Thank you for your response.

  I appreciate that you have attached a screenshot of the problem.

  Have you tried troubleshooting of hardware and devices running?

  Please refer to the suggestions of Naman R responded on 1 April 2011 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/DllRegisterServer-failed-with-error-code-0x8002801/403ee0d0-895B-E011-8dfc-68b599b31bf5

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you

• Runs the command msiexec/v carry out any action in Windows 7?

  Is any action run the command msiexec/v in a command window in Windows 7 64 bit?

  Is the command msiexec/v identical to msiexec.exe/v?

  That means / V for the msiexec command do?

  I was not aware that the cmd was available in win7, but returned to winxp

  http://support.Microsoft.com/kb/314881