Quick Launch buttons no longer work

Similar Questions

• dv6646 hp Quick Launch buttons does not work

  I noticed a few weeks ago that my quick launch buttons were not working. and the volume lights are turned off.

  Hello

  Download drivers based on Windows Vista 32 or 64 bit OS in the site from the link below for the Quick Launch button HP and also the second link show how you can resolve problems on your laptop using the HP provided documents

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3552675&

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=3552675

• DV7-1130us - quick launch buttons doesn't work not - although they light properly

  I'm trying to enable the wifi, although the quick launch buttons are no longer works. They used to work, although I've had my laptop repaired at the service centre (to replace the keyboard), and I have also now upgraded to windows 7 from my cell phone was returned.

  I did a hard reset, updated the bios and updated drivers for quick launch button, even if nothing works. When windows starts, the image of wifi on the transitions of quick launch bar correctly as it has always done (blue orange - since I had I usually it was disabled before I sent to repair and upgrade).

  Is there a way I can activate the wifi card without having to use the quick launch buttons? The wifi card still worked correctly when it is activated, and that it works correctly in Device Manager. I just need to find a way to use the quick action bar, or get quick action bar work.

  Any suggestions? I had prefer not to send in for repair, it is a long process.

  Uninstall the current HP Wireless Assistant and restart.

  Try installing a newer version of HP Wireless Assistant sp49018.exe

• Quick Launch buttons doesn't work on 8710w after fresh Windows 7 install

  Hi all

  I recently did a clean installation of Windows 7 Ultimate 64 bit on my 8710w.

  After you have installed the latest drivers available: HP Quick Launch Buttons v.6.50.12.1 (sp46731.exe) when I press a button, the corresponding light turns on for less than one second, turn and nothing happens. The wireless button does not work even on light.

  I reinstalled the driver and still nothing.

  Quickluanch buttons worked perfect with the previous Vista Ultimate 64 bit OS.

  Someone knows something about this issue?

  I already have google without success, there are references to other models of laptops and drivers which supposedly do not match the 8710w.

  Thanks in advance for any help.

  Kind regards

  Cristhian Anaya

  HP Compaq 8710w Mobile Workstation

  Windows 7 Ultimate 64 bit

  So useful to someone:

  I tried one last thing which was to 'hide' TPM Embedded Security Device Availavility go BIOS, also disabled the «Vista Live App Launch»

  After that the changes made to the above BIOS I have re-installed Windows 7.

  Now, the quick launch buttons work without any problem.

  I have not really now what was wrong, but the problem has been resolved.

  Kind regards.

• his quick launch button does not work when I installed windows 8 in my computer hp laptop pavilion dv3z

  1. number and product name
  laptop HP pavilion dv3z

  2 operating system installed (if applicable)
  Windows 8

  3. All changes to your system until the problem occurred
  installed windows 8

  When I installed windows 8 in my pc laptop hp pavilion dv3z, the quick launch of the volume button is always red and the sound is mute... the driver for quick launch buttons and pilot for the sound is also up-to-date... can you help me please?

  When installing the audio driver, it installed following the instructions or mode of compatibility as shown here?

  Based on the software and drivers page for this device, the device was not tested and certified for Windows 8.  This means that some features may not be the same as the device was not designed for Windows 8.  See this site for more information and to find out if it has been tested for Windows 8.

  If the audio driver has not been installed in compatibility mode, I recommend using the 64-bit Windows 7 found here driver and using the related steps above to install in compatibility mode.

  Let me know what happens.

• Satellite P300 - quick launch buttons does not work properly

  I installed Windows 7 Pro on my Satellite P300 and everytime I try to use the button mute etc it starts the program set button assignment but no options are available to choose.

  Has anyone encountered this and a fix?

  Hey Jones,.

  Can you please tell us which version of Windows 7, you have exactly? I mean the 32-bit version or 64-bit and you downloaded the package of value added specially for Windows 7? From Toshiba Web site shows also different patterns of P300, what model number you have?

  Have you ever tried to assign different functions to the button? For example, there is a file mute.exe as far as I know in case Toshiba should be assigned to the button mute. Check it!

  Maybe reinstall the VAP might also be useful.

• HP Quick Launch buttons do not work under Win 7

  HP DV9310us

  Hello

  A Hard Reset has an effect?

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  Kind regards

  DP - K

• Quick Launch buttons work well after the upgrade to windows 7

  Hi everyone, I have computer computer laptop compaq presario v3000 (v3518tu) series. A few days ago that I upgraded my computer to windows 7 32 bits, but the quick launch buttons do not work very well. in fact, the function is OK (mute, volume up and down), however, color doesn't change (blue to red, blue or red) when I touch the button mute. Can someone help me solve this problem? Thank you

  He is not on the Quick Lauch buttons, your problem is related to his driver.

  Install Vista driver audio on your support page, it will fix the problem of light.

• HP - Fail quick launch buttons

  Laptop HP Pavilion dv7-1000 series

  Microsoft Windows Vista (64-bit)

  HP Quick Launch Buttons don't work correctly... the sound (Mute) button is stuck on... It still works but stays on. More embarrassing, then nothing. Any ideas? I tried to reinstall the driver without change.

  Codec IDT high definition

• Quick Launch buttons stop working on my laptop dv6408

  Hello

  I've upgraded to windows 7 and things where works very well with the quick launch buttons

  but now, no matter what I do to try and fix the problem does'nt last for a long time. I tried a solution

  by unpluging the power plug then disconnect the battery and then hold the power

  button for 30 sec. This should solve the problem on a base in the short term. Is there a download that

  can solve this problem?

  Thank you

  Mike

  @karp57

  The link I posted above does not work for you? I just checked and it works for me.

• HP Quick Launch buttons for Windows 7 to work a bit now, they have stopped working

  So I installed windows 7 x 64 on my HP Pavilion DV9700t. I had no problem using the Upgrade Advisor. My current rating is 4.9
  Everything is much more vivid and works fine, except the HP Quick Launch buttons.
  Initially, they worked so I could control the volume buttons, mute and media. So I don't remember exactly what I did and I installed an update or a specific package of the software HP Quick Launch buttons and they stopped working.

  I do not use the system restore and I mixed through several HP software packages including: SP40139, SP44777, SP39425. These seem to install fine and starts the process of quick launch control. However, the buttons do not always work. I even started the HP Quick launch in Windows Vista compatibility mode buttons.

  So I was wondering how I can return to pilot initial KB that happened when I installed Windows 7. Which seemed to have done the trick, but I don't know what it was.

  HP is too lazy to support my laptop brand, even if it is more than enough to run Windows 7.

  Thank you!

  -octi

  Hi Covrigus Deus,

  I will suggest you to uninstall and reinstall the HP Quick Launch button software and reinstall it back. You can check the latest HP Web site package.
  For help with respect to uninstall and reinstall, you can visit the HP website for the instructions.
  If, however, the Quick Launch button still doesn't work after you have performed the steps in the abvoe, I will propose you to complete the restore of the system.

  To restore the operating system to an earlier point in time, follow these steps:

  1. System restore click Start, type in the search box and then click on the system restore listed programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  1. In the System Restore dialog box, click on choose a different restore point and then click Next.
  2. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  3. Click Finish.

     The computer restarts and system files and settings are back to the State they were in when the restore point was created.

     For more information, see:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• Hello, bright on top of keyboard touch-buttons no longer work.

  I have a Pavilion dv7-3065dx notebook.  With windows 7.

  The lit touch buttons near the screen (in accordance with the power button) on top of keyboard without function longer. As well as the light for the numbers pad.

  I have no idea why these buttons no longer work.

  Please help, thanks.

  First uninstall Hp Qucik buttons launch the program and features in the control panel and restart you Notebook and check if new drivers are installing and the buttons work correctly.

  If the problem exists then connect to www.Hp.com and click on support and drivers and enter the product number and click search and then select software and drivers down load and select your operating system and then click driver - keyboard, mouse and input (6) devices , and then click the HP Quick Launch Buttons ►2010 / 04 / 09, Version: 6.50.16.1, 26.05 M and click donwload and install on nb and check if the problem is resolved, and if the problem exists , and then click Start > Search > the Device Manager and in Device Manager > mice and other pointing device and uninstall the Synaptics ps2 device and restart laptop and check if the buttons work properly, if the problem exists and then contact the Hp Support to set up the bench event for laptop

  Please select the button "Accept as Solution" on the post that answers your question better. In addition, you can select the 'Congratulations' button on any post helpful to give this person a quick thank you.

• HP Envy 15 æ 103NA: HP Quick Launch buttons Drivers + utility to system events

  Hi all

  If anyone knows where I can get these drivers?

  I said I need both in order to get the keyboard shortcuts to work (brightness, volume) etc.

  I have the HP recommended events utility installed... but still nothing works, it would be the HP Quick Launch Buttons driver?

  Kind regards

  Adam

  You're welcome, Adam.

  Interesting... maybe I'm wrong on the QuickLaunch software...

  I have a G1 350 HP business notebook, which came out in 2013 - 14 (I got mine last year).

  I just checked the driver for that page and they stuck the old version of software of quick launch on the support page of my laptop, so maybe that will work...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6709431 & swItemId = ob_104698_1 & swEnvOid = 4059 #tab1

  If it does not either, then see if the new hotkey software works from this professional HP laptop.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_158963_1 & swEnvOid = 4058

  I can help you with the indicators of volume and screen brightness...

  You can get a slightly different Visual you W10, but that's all that is currently available for W7.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_137574_1#tab1

  Best regards

  Paul

• Quick Launch buttons

  Hello

  I have a Pavilion dv7 - 2230ev running windows 7 complete edition x 64 after a new installation of the operating system. Although I could solve the problem with my buttons to quick launch to upgrade the BIOS of my product page and they are now fully functional, I don't get the volume slider window. I tried some updates of the quick launch buttons but did not work. Is it possible to fix this?

  Hello

  If you want to see the Visual display you will need to download and install:

  MediaSmart SmartMenu here (version 3.1.2.2 for 32/64-bit Win7)

  Until you do that you must have installed at least one application of the MediaSmart software package. The best choice will be in my opinion:

  MediaSmart DVD here (version 4.2.5122 for 32/64-bit Win7)

  If you do not want to use on top of software just to have the display on-screen en volume then check the app below:

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what can be done with the 3VRX software.

• Tx1000 and quick launch buttons

  Hello
  
  I have a Tx1000 (REF RX695AV) on which I did a clean install of Windows 7 ultimate x 64.
  
  The touchscreen works can I open/close and drag the programs with the stylus.  So do the buttons (Play, following precedent and Stop) multimedia.
   
  What does work are the four quick launch buttons (screen rotation, display settings, start the QuickPlay, DVD).  I tried to install Vista 64 (sp38171.exe) for the latter and while I now have a driver listed for the buttons located under the computer management, on the triggers of associated program starting a 'known compatibility issues"of Windows 7.  (If I run it there seems to be problems with Windows Explorer.)
   
  The button that I really want to work is the screen turn.  (The display settings are nice to have).  Can I do to get this key work?

  Finally, as an aside during the work of the touch screen, multi touch does not work.  Do I have reason to assume that it is a hardware problem?

  Thank you Tim

  I have the same problem on a tx1340ea.

  After that I extracted sp38171.exe ran setup.exe in Windows XP (SP2) compatibility mode, and it works very well.