DV7-1130us - quick launch buttons doesn't work not - although they light properly

Similar Questions

• Quick Launch buttons doesn't work on 8710w after fresh Windows 7 install

  Hi all

  I recently did a clean installation of Windows 7 Ultimate 64 bit on my 8710w.

  After you have installed the latest drivers available: HP Quick Launch Buttons v.6.50.12.1 (sp46731.exe) when I press a button, the corresponding light turns on for less than one second, turn and nothing happens. The wireless button does not work even on light.

  I reinstalled the driver and still nothing.

  Quickluanch buttons worked perfect with the previous Vista Ultimate 64 bit OS.

  Someone knows something about this issue?

  I already have google without success, there are references to other models of laptops and drivers which supposedly do not match the 8710w.

  Thanks in advance for any help.

  Kind regards

  Cristhian Anaya

  HP Compaq 8710w Mobile Workstation

  Windows 7 Ultimate 64 bit

  So useful to someone:

  I tried one last thing which was to 'hide' TPM Embedded Security Device Availavility go BIOS, also disabled the «Vista Live App Launch»

  After that the changes made to the above BIOS I have re-installed Windows 7.

  Now, the quick launch buttons work without any problem.

  I have not really now what was wrong, but the problem has been resolved.

  Kind regards.

• Quick Launch buttons no longer work

  The QuickLaunch buttons on the top of the keyboard no longer work.  I tried to uninstall the QuickLaunch software and reinstalled, no solution.

  Any ideas on how to solve this problem, other than having to reinstall the entire operating system?  I really want to do

  Hello

  Try a Hard Reset as follows

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the power button for a minute.  Reinsert the battery, connect the power adapter and start Notepad.

  Kind regards

  DP - K

• Next button doesn't work, not when you click on a question slide

  Sorry for the long title.
  
  I have an Adobe Captivate project in which I have a few question slides. I have authorized moving backward and also allowed the user to get a question wrong unlimited times.
  
  However, when the user gets a question slide, if he or she clicks the previous button to return to a slide where I could have just text, clicking the next button I on sliding of the works is no longer. The next button is also configured to be clickable unlimited periods, and the setting is to go to the next slide.
  
  But when going back to this slide and then clicking next to move to the slide in question once again, the next button turns on, but nothing happens.
  
  So what I am doing wrong? :) Thanks in advance!

  Happiness is finding your own problems.

  I went into the preferences of Quiz and success or failure and changed to Inifinite Attemps to the degree of fault. Problem solved!

• HP T5730 XPe SP - 3 TeemTalk 7.0 Soft buttons doesn't work not as expected

  I am trying to program the soft keys in TeemTalk 7.0.  I built 'scripts', by using the build in tools.

  When I open a saved session keys are displayed as expected.  However by pressing one of the

  key does not execute the associated scripts. A sample script name is<'s:\hp-T5730\login.spt'>

  It I open the script editor and click on run it works?  Now, if I click the softkey, it works.

  Output and reruning TeemTalk 7.0 then opening the recorded session fills the softkeys as expected

  However by clicking on one of them does not run the script unless I am forst open in 'Tools', 'Script '.

  I am at a loss.

  Dave,

  Upgrade to 7.3.5 solved problems and I got a copy for Windows which works very well.

  Thanks for your help.

  Ken

• quick selection tool doesn't work not as expected

  I used photoshop for the last 3 weeks to cut out pictures and create a transparent background.

  ex

  Method: Open the img in ps6. then use the Quick Selection tool to select the area of interest, then click on the tab 'Edit' then choose cut on the menu drop down.

  Now the same method gives me a white background.

  I have reset photoshop by reopening with clt alt shift and reset to default... same result

  also reinstalled photoshop... of the efforts in vain.

  Can someone help pls

  THX

  I don't know what is happening here, but your steps really do that properly in all cases. Try this.

  (1) make your selection, you see the moving dotted line

  

  2) click on the layer mask icon in the indicated measure. Note the mask is shown on layer 0

  

  (3) on the screen, it will look like this with a transparent background, but nothing has been deleted

  

  (4) If you are not comfortable with being there layer mask, select the mask and right click then choose apply layer mask. I would say it's totally useless, but some people find it easier to understand.

  

  (5) the layer will look like below. I know its tempting to cut and paste, but ultimately you lose things, but to do this way, you are in complete control and can go back if you make a mistake.

  

• HP - Fail quick launch buttons

  Laptop HP Pavilion dv7-1000 series

  Microsoft Windows Vista (64-bit)

  HP Quick Launch Buttons don't work correctly... the sound (Mute) button is stuck on... It still works but stays on. More embarrassing, then nothing. Any ideas? I tried to reinstall the driver without change.

  Codec IDT high definition

• DV8T HP Quick Launch Button problems

  On my HP Pavilion DV8T, my quick launch buttons keep it up. My wireless light turns off by itself, and in same time, my treble and bass will fluctuate. When this happens, if I type something in that she left the window, I'm and a treble/bass window appears. Also sometimes, like now, my mute button and my wireless button will not even appear or work. I have tried everything I can think, I have reformatted the hard drive, downloaded the drivers, and I've even sent in HP and they doesn't fix it. Any ideas would be appreciated.

  Thank you for your time,

  Cameron

  Hi Camde,

  This seems to be a problem reported by other users on the HP forum.

  Here's a link with some troubleshooting steps and some info on a patch, you can try:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/HP-Pavilion-dv8t-1000-CTO-treble-bass-indicator-keeps-popping-on/m-p/220247

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Quick Launch buttons for Windows 7 to work a bit now, they have stopped working

  So I installed windows 7 x 64 on my HP Pavilion DV9700t. I had no problem using the Upgrade Advisor. My current rating is 4.9
  Everything is much more vivid and works fine, except the HP Quick Launch buttons.
  Initially, they worked so I could control the volume buttons, mute and media. So I don't remember exactly what I did and I installed an update or a specific package of the software HP Quick Launch buttons and they stopped working.

  I do not use the system restore and I mixed through several HP software packages including: SP40139, SP44777, SP39425. These seem to install fine and starts the process of quick launch control. However, the buttons do not always work. I even started the HP Quick launch in Windows Vista compatibility mode buttons.

  So I was wondering how I can return to pilot initial KB that happened when I installed Windows 7. Which seemed to have done the trick, but I don't know what it was.

  HP is too lazy to support my laptop brand, even if it is more than enough to run Windows 7.

  Thank you!

  -octi

  Hi Covrigus Deus,

  I will suggest you to uninstall and reinstall the HP Quick Launch button software and reinstall it back. You can check the latest HP Web site package.
  For help with respect to uninstall and reinstall, you can visit the HP website for the instructions.
  If, however, the Quick Launch button still doesn't work after you have performed the steps in the abvoe, I will propose you to complete the restore of the system.

  To restore the operating system to an earlier point in time, follow these steps:

  1. System restore click Start, type in the search box and then click on the system restore listed programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  1. In the System Restore dialog box, click on choose a different restore point and then click Next.
  2. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  3. Click Finish.

     The computer restarts and system files and settings are back to the State they were in when the restore point was created.

     For more information, see:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• Quick Launch buttons work well after the upgrade to windows 7

  Hi everyone, I have computer computer laptop compaq presario v3000 (v3518tu) series. A few days ago that I upgraded my computer to windows 7 32 bits, but the quick launch buttons do not work very well. in fact, the function is OK (mute, volume up and down), however, color doesn't change (blue to red, blue or red) when I touch the button mute. Can someone help me solve this problem? Thank you

  He is not on the Quick Lauch buttons, your problem is related to his driver.

  Install Vista driver audio on your support page, it will fix the problem of light.

• Display problem on the dv7 series laptop quick launch buttons

  Hello

  I have a new pavilion dv7-6b55dx laptop and I put windows 7 Professional (64 bit). Since that time (because before there home edition of the best buy store) everytime when I use a function key I don't see no display on the screen, for example, if you want to mute the sound, not sure if it worked or if you want to manage the brightness of the screen, you don't see anything on the screen (icon (, image, etc.).

  I downloaded the quick launch software and bottom of quick launch, but nothing has worked.

  How can I solve this problem?

  Thanks for your help

  Hello

  Download and install the HP OSD utility on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52956.exe

  Once the installation is complete, you pouvez must restart the laptop.

  Kind regards

  DP - K

• dv6646 hp Quick Launch buttons does not work

  I noticed a few weeks ago that my quick launch buttons were not working. and the volume lights are turned off.

  Hello

  Download drivers based on Windows Vista 32 or 64 bit OS in the site from the link below for the Quick Launch button HP and also the second link show how you can resolve problems on your laptop using the HP provided documents

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3552675&

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=3552675

• Quick Launch buttons stop working on my laptop dv6408

  Hello

  I've upgraded to windows 7 and things where works very well with the quick launch buttons

  but now, no matter what I do to try and fix the problem does'nt last for a long time. I tried a solution

  by unpluging the power plug then disconnect the battery and then hold the power

  button for 30 sec. This should solve the problem on a base in the short term. Is there a download that

  can solve this problem?

  Thank you

  Mike

  @karp57

  The link I posted above does not work for you? I just checked and it works for me.

• his quick launch button does not work when I installed windows 8 in my computer hp laptop pavilion dv3z

  1. number and product name
  laptop HP pavilion dv3z

  2 operating system installed (if applicable)
  Windows 8

  3. All changes to your system until the problem occurred
  installed windows 8

  When I installed windows 8 in my pc laptop hp pavilion dv3z, the quick launch of the volume button is always red and the sound is mute... the driver for quick launch buttons and pilot for the sound is also up-to-date... can you help me please?

  When installing the audio driver, it installed following the instructions or mode of compatibility as shown here?

  Based on the software and drivers page for this device, the device was not tested and certified for Windows 8.  This means that some features may not be the same as the device was not designed for Windows 8.  See this site for more information and to find out if it has been tested for Windows 8.

  If the audio driver has not been installed in compatibility mode, I recommend using the 64-bit Windows 7 found here driver and using the related steps above to install in compatibility mode.

  Let me know what happens.

• Quick Launch buttons

  Hello

  I have a Pavilion dv7 - 2230ev running windows 7 complete edition x 64 after a new installation of the operating system. Although I could solve the problem with my buttons to quick launch to upgrade the BIOS of my product page and they are now fully functional, I don't get the volume slider window. I tried some updates of the quick launch buttons but did not work. Is it possible to fix this?

  Hello

  If you want to see the Visual display you will need to download and install:

  MediaSmart SmartMenu here (version 3.1.2.2 for 32/64-bit Win7)

  Until you do that you must have installed at least one application of the MediaSmart software package. The best choice will be in my opinion:

  MediaSmart DVD here (version 4.2.5122 for 32/64-bit Win7)

  If you do not want to use on top of software just to have the display on-screen en volume then check the app below:

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what can be done with the 3VRX software.