Quick newb question: possible to 'navigate' the file on an ESXi host computer system remotely?

Similar Questions

• Is it possible to open the file on communication to labview design in labview?

  Is it possible to open the file on design Communication Labview in Labview? If yes how.

  Thank you

  No, unfortunately it is not possible.

• Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated

  Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...

  Hey James,.

  I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks again
  OK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help!

• I accidentally deleted a file from my USB. is it possible to extract the file?

  original title: the files on USB.

  I accidentally deleted a file from my USB. is it possible to extract the file?

  Try using one of the many recovery tools. R-Studio is good, but the ins' free t. Microsoft Student Partner

• installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  Welcome to the community,

  Please take a look at for example http://wp.secretnest.info/?p=697 to know if this is the problem you are facing.

  André

• I am trying to open a file and make me notice that the required index.xml file is missing. Is it possible to access the file? I don't know why this happened.

  I am trying to open a file in Pages 09 and am getting notice has the required index.xml file is missing. Is it possible for me to access the file? I don't know why this happened.

  You open a file with Pages ' 09 Pages 5.x.

  You need to right-click on the file and open it with Pages 5.x (the one with the orange document icon).

  Peter

• Is it possible to rename the files in a particular format?

  Hello! I work with dozens of files like this all day, and I tried to understand if there is a way to rename them which will reduce my processing time. I know the company F2, but who don't get what I need. Here's an example, please let me know if you have any ideas. I do this particular task on Server 2003 Enterprise v5.2. But, if it makes a difference, I could move the files and do it on Server 2008 R2 Standard, 7 or XP.

  I have these three files:

  123_b_456.txt

  456_g_789.txt

  456_e_789.txt

  And I want to finish with looks like this:

  123_b.txt

  456_g.txt

  456_e.txt

  Is there a way to do this?

  Thanks a bunch!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows server on TechNet. Please ask your question in the TechNet Windows Server Forums. You can follow the link below to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

• Is it possible to get the files for windows vista, so I can reinstall my system?

  Hello

  Im a user of linux on one machine HP Pavilion dv5-1095eo leisure. IM tired to restart my machine to run a windows OS, so is possible for me to get the files for windows vista. I got the windows key attached under the computer and I don't have any windows CD when I brought the machine.

  Hello:

  You can do your own installation disc Vista too if you wish.

  If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

  After you have successfully installed vista, you can download the drivers you need your PC support and driver page.

  Paul

• Is it possible to move the files to another user in Vista?

  so I was wondering if I can move all my files and applications on another user? is it possible or not?

  Hi andylam123,

  Yes, you can move your files and settings to a different user account.

  Refer to this article for more details:

  Difficulty of a corrupted user profile

  Note: Ignore the title of the article. You can follow the procedure to copy the files successfully.

• Is it possible to access the files shared in the Simulator?

  My Playbook application creates a few files in the shared files folder. When running my app in the Simulator, is it possible to (read) access these files from Windows?

  Thank you

  First, configure the PlayBook Simulator as a target.

  1. Click on the file-> New-> other...
  2. Expand the BlackBerry Tablet OS.
  3. Select BlackBerry Tablet OS target, and then click Next.
  4. Enter the IP address of the Simulator (or use automatic detection).  Leave the password blank and complete the wizard.

  Once you have the PlayBook Simulator configured as target, use the following steps to access the folders.

  1. Click on the window menu.
  2. Choose the command display see her-> from others.
  3. Expand QNX.
  4. Select target file system browser , and then click OK.
  5. In the target file system browser navigated to the folder that contains the file that you want to copy.
  6. Right-click on the file you want to copy, and choose copy to.  You can also drag and drop files to and from this window.

• How to create the file .bar question about what all the files to submit?

  My project works well in Debug and Release in the simulator mode?

  Question: How do I create the .bar file and which is the file to be submitted?

  What files should I put in the files of importation of orders and how is this different from Add filebundle? Any help is appreciated.

  Thank you.

  harshvt wrote:

  My project works well in Debug and Release in the simulator mode?

  Question: How do I create the .bar file and which is the file to be submitted?

  What files should I put in the files of importation of orders and how is this different from Add filebundle? Any help is appreciated.

  Thank you.

  The bar is all you need to submit the file.

  There are a number of positions (including many on this first page) on how to package and sign your app Note you only need to package your application (no sign) to the quality of the offer. Do not sign your bar so that you can allow people to buy/download your application.

• Is it possible to put the files in drive J on the C drive?

  By transferring data from XP again Windows 7, provided about my Outlook seems not to have been transferred using the Easy Transfer Wizard, so I downloaded the missing data on a disc of J.  In order to put in my Office Outlook, he needs on the C drive in my new computer, it's a .pst file.  Is it possible to transfer the info from the j to the portion of the C drive that has other transferred Office Outlook .pst files?  If so, how?

  Thank you.

  Open Outlook
  Click on the file tab
  Click on Open & Export
  In the main window, click on Import/Export
  In the wizard import / export , click import from another program or file
  Click Next
  Click Outlook Data File (.pst)
  Find and select the file .pst on your drive J
  Select one of the options three import
  Click Next
  Click Archive Folders
  Check include subfolders
  Select one of the places two import
  Click Finish
  You have completed

• Is it possible to update the file descriptor of the assettype of basic assets?

  Hello world

  Is to update the file descriptor of the assettype core assets without dropping and recreating again anyway?

  I created a base with a descriptor file asset, but it has a text field with 50 on this character restriction. Now, I want to update the same file for maxlength 255 characters. Is there anyway to do this without deletion and recreation of the assettype basis?

  Thanks in advance.

  Kind regards

  Praveen

  Thank you very much, Sikora, worked perfectly

  Have another question? Can use us the same method to drop the columns also? As the update the ADF with fewer columns and then modify the table in the DB?

  Kind regards

  Praveen

• Is it possible to change the file name given to attachments in an email button?

  Whenever I click on the standard e-mail button, I get an attachment with random alpha and numeric characters for the name of the file.  Is it possible to change the names of files to match a data field in the form or start with something that I choose?

  Thank you

  Judy

  Hi RudyLou36,

  While displaying the form in the TAB overview of LC Designer, you will always get the unwanted characters as the name of the file. Save the file and open it in Acrobat or Reader.

  You will not be able to change the name of file unless you save the file first. Here (http://forums.adobe.com/thread/462681) is an example of a number of ways to deal with parts of the email programmatically.

  Kind regards

  Rous

• Newbie question: how to display the logo of the company for all applications

  Hi all:
  
  I am new to APEX and in the thorough step 'Application two days Express Developer's Guide.
  
  I have Oracle XE with APEX 3.1.2 installed.
  
  I have a file called test.gif stored on my C:\logo\test.gif logo
  
  The question is what is the step to display this logo on all pages for each application (I could build applications in the same workspace, and I like the same logo to all pages for each display application).
  
  I have extensive air manual and this forum and cannot always understand.
  
  Here is what I tried:
  
  -Click on an app that I created in Application Builder
  -Click on "shared components".
  -Files-click == > Images and upload my C:\logo directory test.gif
  -Return to page 'Components of the part' == > Logo and select / access to the following values:
  > logo type: image
  > logo: /i/test.gif
  > logo attribute: width = "100" height = "20" alt = "Company Logo".
  
  Save the changes. When I run my application, the company logo displayed as 'x' icon.
  
  A I missed something?
  
  
  Thank you!
  
  Kevin

  Kevin,

  You wanted a step by step so that is.

  You must first download your logo to your workspace file. Then you can assign it as a logo, so this step appears on all pages.

  Before you start, I suggest that ensure you that your graphic file name does not include the spaces inside. Replace spaces by dashes, underscore or squish traits it.

  1. application Builder-> shared-> files components-> Images.

  2. click on the create button.

  3. application for leave "No Application associated with" value, provide the specification of file, then click on the download button. When it's done, copy the name of the file (for example MyFile.gif).

  4. go into the Application Builder-> shared-> Application-> definition components

  5 scroll down the page to the section Logo and set the Type of Logo Image.

  6 Logo, enter ' #WORKSPACE_IMAGES # ' follow-up of your files.

  for example #WORKSPACE_IMAGES #MyFile.gif

  7. Optionally, you can set the attributes of the Logo, for example, by specifying the height and width to display your image.

  8. click on apply changes.

  9. run app.

  If you have the right to file specification, you should see your logo in the upper left corner. If you want elsewhere, you have to change the page template, which is way beyond the scope of this forum and the tutorial. :-)

  Good luck

  Stew

  p.s. If it works for you, please give points for correct answer at the top of this topic.