Quick question on the addition of black screen

Similar Questions

• Just a quick question about the appearance of the cluster

  Hello, this is Matthew, just a quick question about the appearance of the cluster

  Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...

  What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".

  Is there a quicker way to deal with?

  THz so much!

  You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.

• I had a start of the computer, but black screen problem. Now resolved, but have a question.

  Hi, a question for the tech support.
  
  My solution ended up having to remove a faulty RAM stick. Fortunately, I had two, one of whom was a 2 GB key and that went wrong was 1 GB. Whenever this faulty stick has been in the laptop, the system wouldn't start.
  
  The problem is now resolved after removing the defective RAM 1 GB stick.
  
  In any case, I was wondering on a stick of RAM that turns bad in this way.
  
  First question is, how are they just bad like that?
  
  Second question, can they be fixed all or none of the trash can right RAM sticks after that?

  Hello feroxlara,

  I see that you have any questions about RAM, is that correct?

  The answer to your first question is that there are several things that can cause a memory stick to stop working or become defective. It may be overheating, overvoltage, problems with the RAM itself, problems with the slot in the motherboard memory is underway and many more. It is a component which may fail on any system.

  As far as being able to set the memory for the average person it is not likely, here is a link to an article on the repair of RAM. He explains what would be necessary to fix a memory module and in most cases, it is easier to buy a new stick of RAM.

• Envy 15 k005tx: laptop will not close properly... the va just black screen but the light is on and the fan also

  Laptop doesn't go out normally... va just black screen but the light is on and the fan is also on... so I have to stop it by pressing the power button... help plz...

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  Try to use the following method to see if you can install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• HP Pavilion TouchSmart 15-b100: "Press the ESC key" black screen TouchSmart 15-b100sa

  Hello

  I'm helping a friend with his computer because his son decided to play with it and now it is unclear what steps it took to create this problem.

  Initially, he asks a password on a black screen before opening the BIOS screen.

  Someone in this forum helped me with this problem and told me to try a code which worked perfectly.

  After that, I get a black screen that repeated me "press ESC for Boot Menu".

  If I press this button, a message appears saying "ESC...". Starting break"and stays there for about 2 minutes, which I think it's a lot of time to open the start menu to enter the BIOS and change the settings.

  Does anyone have any idea of what's going on?

  The computer is a HP Pavilion TouchSmart 15-b100sa Sleekbook

  I would appreciate if someone could help with this problem.

  Thank you

  Hi @jc4 ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion TouchSmart Sleekbook 15-b100 and issues with maybe an update. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  Here is a link to computer won't start for Windows 8, if you need it.

  Please let me know how it goes.

  Thank you.

• Windows Vista does not... load cursor in the top left black screen

  When I do a cock hard down, because the computer froze my computer do not have to restart.  I get a black screen with a blinking white cursor in the upper left. can hear clocked but computer does nothing.  Help, please

  Hi mistyparsley,

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Disconnect the external device such as a printer, scanner, etc., try to start.

  Method 2:  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 3: Perform a startup repair.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 4: If the problem persists, perform a system restore to the mode with the DVD of vista windows recovery (winre).

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• Quick questions on the CC student kit

  I tried to search the FAQ or customer support, but couldn't really find something where I could just after a small question about the recognition of things so... If you know what I'm looking for already feel free to guide me where to look for it.

  I was therefore interested to the kit of the CC student which includes all applications a year. (think it says about 2000 Swedish kronor, which is roughly around 200 euros).
  And so I saw was one of the best idenfications using your email from the school which includes stuff like ".edu".  The problem is that I have one, but only use us it as a registering or connect the credentials for our orders online. If this isn't an email that I can receive emails since then, so I'm just wondering if all I had to do was use it as a registering or the legitimacy that I am a student, or if it must be signed using this specific e-mail. I could talk about technology in school and get it set up, but he mentioned that it is somewhat lengty and or boring process then advised me to see if it was as a registering first egible before again us.

  If you know where I could have found this info in FAQ or similar stuff please let me know, otherwise I'd like a few quick answers to this. See you soon!

  Hi Nyom,

  I order to buy creative cloud subscription, you must have a valid email ID where you can receive by e-mail sent by Adobe.

  Given that the address you have is not where you can send or receive e-mails, you can go ahead and use a personal e-mail ID.

  If you purchase the subscription using an ID, you may be asked to provide additional proof of eligibility.

  Please see the shared document:student software discounts, the eligibility of the student. Adobe

  Please update the thread in the case of all other applications.

• HP PL5060N Plasma HDTV - part of the display of the image is black screen

  Our Plasma HDTV has suddenly stopped working properly. Nothing has been updated or changed. The left third of the picture is now just black screen. The image is not condensed somehow - showing just is no longer on this third. If I try to bring up a menu it also shows that 2/3 of the screen. Help, please! Thank you.

  Hello

  I think you have a few questions about it. There are two things that can cause this black: a buffer Board and the plasma panel itself. We are unable to determine what is the cause without putting the Council of the buffer in the game. If the buffer Board solves the problem so you can use your TV again. If it does not solve the problem then the plasma itself Panel is bad and the tv will be trashed, not repairable.

  Now, it is still under warranty? If Yes, call HP otherwise with the current prices of plasma TV, buy a new one might be cheaper.

  Kind regards.

• Satellite C650 - stuck with the underscore and black screen boot

  Model: satellite C650

  Operating system: windows 7 Home premium

  Problem: when I try to turn on the computer I see the Toshiba screen and then a black screen with a underscore that blinks several times then stops, and the computer is blocked like that. The fan seems to be working. I can't go to mode without failure or boot options, even if I press f8 or f12 nonstop.

  Last time I started mode, I was stuck on the screen but the connection keyboard touchpad did not work and I couldn't stop. After that I have the strength of closing down and try to restart stuck like that. No beeps or anything like that.

  Any help would be appreciated.
  Thank you

  Good news.
  Thanks for the comments.

• Stream HP: I accidentally closed my laptop while it was restarted and now it's the juice a black screen it has been hours

  I accidentally closed my laptop while he was now to restart juice is a blank black screen, it won't do anything it's only a couple of months

  Sdyork

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the problems with your new HP PC and wanted to help.
  
  You should not have problems with a PC this new.
  
  While this PC is still under warranty, contact HP customer care directly so that they can put you in contact with HP Technical Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  Good luck

• Plug the VGA cable causes the crash or black screen on my Thinkpad. Help!

  On my newly purchased W530, a cable VGA-causes a crash or a black screen on my Thinkpad.

  The foregoing happens whenever I have insert the cable VGA which is quite annoying, because I use it with my projector every day.

  Accidents seem to occur more often when I closed the lid and insert the VGA cable. If I open cover more often get a black screen (which remains black even when I leave the cable again).

  I could try to fix this problem?

  Which driver (or other) would be the most likely cause?

  Thanks Adam! :-)

  Yes, as I mentioned, accidents have disappeared after installing the latest driver Nvidias own site.

  Remaining problems are small problems which I can live with to what NVidia fixes if all goes well with an updated driver.

  But it was really great to see instructions on how to start in safe mode on Windows 8. I always wondered who. Thanks again Adam! :-)

• I received a message stating that resources were low. Computer has crashed and when I turned on the computer had black screen

  Original title: drive full D... computer laptop unusable

  I have a HP Pavilion dv7 laptop... computer.  Two months ago I saved mistakedly C drive to D drive.  I soon messages that D was 85% full... knew that I'd made a mistake... bul everything seemed OK.  Has nothing on this subject.  Yesterday, I received a message stating that resources were low.  Computer has crashed just after that.  The computer turns on with only a black screen.  Pressing F8 does not start in safe mode as it does on my PC.  Can someone help me?  Thank you!

  Hi SteveKinney,

  ·         What version of Windows is installed on your computer?

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Start in safe mode and do a System Restore to a point before the show.

  See Advanced startup options (including safe mode) for more information about starting in safe mode.

  Method 2: See the following articles and check if the problem still persists.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  See also the article mentioned for more information:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  I hope this helps.

  Thank you all... I brought to a repair shop... He says that the LCD is toasted, the date is displayed correctly on another monitor.  About $200.

• Start the system with black screen.

  Original title: black screen D610

  Get a black screen and the low log in box.  able to connect, but cannot see the loading process to be able to try safe mode, can even see the start at the bottom of the screen.  nothing appears on the icons even not. This problem occurs on a dell latitude d610 laptop computer

  It seems that the monitor is bad. Hooked to a laptop spare part and he took care of the problem.  Thank you for your response.

• Start the computer to black screen and the computer runs hot

  original title: sick Vista laptop

  My daughter portable computer began acting strangely very yesterday.

  Once connected, I get a black screen and a cursor.  The system seems to work at full speed, because I can hear the fan, and it runs very hot.  No matter how long it sits, the desktop does not appear.

  I can use Ctrl-alt-del to display the Task Manager.  The list of processes is limited to the process of the current user, and none of them use important CPU. If I click on 'See the process for all users', taskmanager freezes and I have to disconnect to get rid of him.

  Using the Task Manager, I can kill the process Explorer and then start it again, date at which I get my desktop.  However, it is still running hot and noisy.  With the help of SysInternals ProcessExplorer, there is no process using any important CPU.  Most of the time CPU is reported as inactive.

  I don't know what to think.  A boot loader took over the system?  A hardware problem?  OS corrupted files?

   

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Boots Vista 64 Ultimate SP2 (with domain) to the mouse cursor black screen white after that several failure system restores

  Who can help me to WHO:

  Sorry for fast hiking, misspellings, it's late and I do not use my normal computer to this problem I have.

  I am currently sympthym to start the black screen with a white cursor (furniture, put in construction in the middle) with my laptop Dell Studio 15 (model 1537) that running Vista Ultimate 64 bit SP2.  He started tonight after repeatively, I tried to restore to a date prior to the System Restore tool.  I wanted to get back to Monday due to some software installations.  However, each attempt to restore failed and then after the 3rd or 4th attempt, when I tried to restart, I was faced with a window very long stop, and I was impacient and pressed and held the power button to stop it.  Subsequent starts, I've known this problem with no solution having been found for the moment.

  I tried several things at first, such that I tried Ctrl-alt-del, control-shift-esc, blindly connect with my fingerprint.  I tried windows key combos, but no luck.  Still stuck with screen black mouse cursor

  I have my vista ultimate 64 bit installation disc, and I started with the dvd and tried to fix it.  Automatic repair tool says he finds a problem with my start and had a difficulty to which I applied and rebooted.  But it did not work.

  Then, I tried to boot from the dvd again and did the repair option again, this time, Autostart reparir tool see nothing wrong with my start and I tried a system restore, but alas, it failed after having worked for a bit.  Telling something about restoration being corrupted.  I tried command prompt (X:\Source) and make chkdsk c: /p (which btw, implies / f as well) and it found some errors and repaired them or what not was wrong to write to newspapers, even if and then after long waiting, returns to the c: prompt.  No effect.

  On subsquent dvd boots, I tried the option to command line renaming a "Logs" directory and create a directory "Logs" empty (which was mentioned in some research online and even in a few posts here), but that has not solved the problem for me either.

  Dvd later boots, I have tried regedit solution method, where you will load a SYSTEM key and set some sort of AUTHORITY NT set... but when I checked key, she was already the correct setting.

  Then I learned that I could press the "Shift" key repeatedly while mode cursor screen black/white/and try the propmpt for keys pop-up to sticky.  But he said no 'link' as many instructions in this message box.  When I click 'Yes' to sticky keys, nothing is displayed and the pop-up closes.  Ditto for the 'no '.  There is no mention of accessibility settings.

  I tried all modes of security, but just a white cursor plu experience.  I have tried to use "last known configuration', 'debug mode', 'start logging mode', mode"disable driver signing"and again, the same thing, the cursor of the black and white screen.  I'm really at my wit's end, and I don't want REALLY to re - install everything (operating system, programs, settings, etc.) ... I did not back upward, and I use this machine without problem for more than a year.

  I remember once XP has a "repair install" mode which was really obvious to end users, since it looked almost identical to a clean install.  I have also heard (but can't really confirm) Vista has no such a fashion, that, by clicking on install, he repaired to the simular OS to XP disks how would repair their facilities.  I can't risk my data/programs/settings for accidental clean installation.  Help, please!

  Sincerely,
  Robert Eckman

  According to me, put it back in place, is the only solution to your problem!