NAT traversal broken after upgrade to 7.04

Similar Questions

• Siri is broken after upgrade to iOS 9.2

  After upgrading iOS to the 9.2.  Siri has lost his voice and takes no action when I give his orders to

  Press and hold home/sleep set selection button until you see the apple logo and then release.

• Responsive support in the context of HTML5 broken after upgrade to 11.03.268

  Responsive HTML5 in the context help links using robohelp_csh.js and the following function is no longer work after upgrade to 11.0.3.

  The correct html page is displayed. Contents and index are displayed but do not respond and you can not navigate to other pages.

  
  

  var HH_DISPLAY_TOPIC = 0;
  var HH_DISPLAY_TOC = 1;
  var HH_DISPLAY_INDEX = 2;
  var HH_DISPLAY_SEARCH = 3;
  var HH_HELP_CONTEXT = 15;

  
  function RH_ShowHelp (a_pszHelpFile, uCommand, hParent, dwData)
  {
  This function is supported WebHelp
  var strHelpPath = a_pszHelpFile;
  var strWnd = "";
  Var NPOS = a_pszHelpFile.indexOf(">");
  If (NPO! = - 1).
  {
  strHelpPath = a_pszHelpFile.substring (0, NPOS);
  strWnd = a_pszHelpFile.substring (nPos + 1);
  }
  
  RH_ShowWebHelp (hParent, strHelpPath, strWnd, uCommand, dwData);
  }

  
  function RH_ShowWebHelp (hParent, strHelpPath, strWnd, uCommand, dwData)
  {
  hParent never used.
  ShowWebHelp (strHelpPath, strWnd, uCommand, dwData);
  }

  
  function ShowWebHelp (strWnd, uCommand, strHelpPath, nMapId)
  {
  var a_pszHelpFile = "";
  If (uCommand is HH_HELP_CONTEXT)
  {
  a_pszHelpFile = strHelpPath + '? rhcsh = 1 & rhmapno = "+ nMapId +" & rhnewwnd = 0 ";
  
  Note: On IE, specifying the Help window causes an intermediate empty window open.
  that fails to close.  To avoid that we don't bother specifying the window more.

  If {(strWnd)
  a_pszHelpFile += ' & rhwnd = ' + strWnd;
  //}
  }

  
  If (a_pszHelpFile)
  {
  var leftPosition, topPosition, height, width;

  width = window.screen.width * 0.8;
  height = window.screen.height * 0.8;
  leftPosition = window.screen.width * 0.1;
  topPosition = window.screen.height * 0.1;

  "" var sParam = "left =" + leftPosition + ", top =" + topPosition + ", width =" + width + ", height =" + height + ", resizable = yes";
  Window.Open ("__webCshStub", a_pszHelpFile, sParam);
  }
  }

  I don't remember all the other reports of this problem. Have you reported it to Adobe? Adobe - feature request/Bug Report Form

  Edit: Willam Site lists the hotfixes and patches. There is a fix post - 11.0.3, potentially, you can try.

  Patches and updates RoboHelp update | WvanWeelden.eu

  http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform&product=38

• Links broken after upgrade

  Hi, after upgrading to the latest muse, adding a page and scrolling of some effects, 2 items in the menu no longer work for a reason any. Two menu items have drop-down menus, 'Portfolio' and 'contact', I published the changes thinking that maybe they would do as they should him, but did not. The site is www.meamdesign.com.au thanks for any help

  I was check and double check, moved the new page from the drop-down list, it is now visible, and the link in the contact page works fine. Everything seems correct (see screen shot)

  I guess the question is, are at - it int the upgrade bug?

  Hello

  The framework containing the yellow scroll image on the right covers half of the menu. If you have noticed, half of the 'Invitation' menu item is not clickable.

  Kind regards
  Aish

• Broken after upgrade to Maverick Mercury playback engine

  Can someone help me get the use Mercury playback engine after upgrade to Maverick. I have a MacPro 8 core with the Nvidia Quadro FX4800 and I can't select the GPU all way under playback settings. It's like iff Maverick does not recognize the GPU. Is there a patch for Adobe Premiere Pro CC? or a Patch of Maverick or something? Anyone found a solution for Nvidia GPS assistance from Maverick. I have updated to the latest version of the 22 Oct 2013 CUDA driver

  Help!

  Thanks in advance

  Hi all

  NVIDIA working on the release of an updated driver that will support CUDA for various cards, including the 4800 on systems running Mac OS 10.9.

  Sorry for the inconvenience.

  Peter Garaway

  Adobe

  Premiere Pro

• path of the image broken after upgrade 4.1 and 4.2

  Hello
  
  Just upgraded multiple instances of 4.1 to 4.2.1. Running apex listener 2.0.0.354.17.05 on glassfish 3.1.2.2. Our database is 11.2.0.3.0 on centos 2.6.32 - 279.9.1.el6.x86_64
  
  One of our updates have a very unusual problem. Our applications everything will work perfectly, but the generator screens are empty, or at least appear empty. The source of the page looks normal in a browser, except we are seeing that the image paths are all poorly trained. They all lack the directory ' / ' final after the 'i' of the images. For example, the login page of the generator has the reference of the following image:
  
  https://ourorg.org/iapex_ui/apexlogo.PNG
  
  who should be
  
  https://dev.insitehome.org/i/apex_ui/apexlogo.PNG
  
  If I type the correct URL, the image is visible, so I doubt there is any problem with the version of the images or the location of the server. Apex SEEMS to generate the incorrect path for the images.
  
  Any suggestions?
  
  Thank you
  Steve

  stevepence wrote:
  OK, it seems pretty obvious what happened. Instead of

  @apxrtins.sql SYSAUX SYSAUX TEMP /i/
  

  I dropped this trailing slash after the 'i '.

  I hope someone can tell me where in the apex metadata to fix this without reinstalling.

  Run the /apex/utilities/reset_image_prefix.sqlscript, but make sure that they have set Re: 4.2 reset an error sql prefix image. If this isn't the case, apply the workaround before you start.

• Mail broken after upgrade to 10.11.2

  Just installed automatic updates without checking what they have first. Stupid.  Now I El Capitan 10.11.2 and when I try to open a mail, I get the window Mail upgrade, with a message 'Validation of the mailboxes' and everything is grey, including "Cancel".  If I quit and reopen, I get a message 'Validation of the libraries '.  If I left once again it goes back to the mailboxes on the commit message.  I tried to open the program offline to see if I could get in old messages but no go.  Same windows.  Stupid #2, I have Time Machine off.  Can anyone help?  Is it possible to re - install Mail maybe?

  Fixed: 'Cancel' is not an option. The window says "Quit" and "continue". These options are grayed out.  I quit smoking by going in the Mail drop.

• CS6 color profile broken after upgrade Windows 10

  Hello! I installed Windows 7 to Windows 10 earlier. And everything works perfectly fine. There is nothing wrong with my screen color. It is perfectly fine. I use a fairly new Acer V246HLBD monitor.

  That is the problem. I run CS6 and get a popup for color management with ignore them and use anyway. I clicked on the use anyway and now, my whites are completely yellow. All wise color outside CS6 is fine. It is only in CS6. I did install new graphics drivers. Only the windows 10.

  Ed. A little more information. It seems to only be white is yellowed. All other colors look good. All layer masks are default - yellow. And it is not what I can do about it.

  Good so I got it to work. For anyone who comes across it. I've done two things. I did my Photoshop color settings look like this. Click on [Settings] and then [color]

  http://S5.postimg.org/q1yngp807/Untitled_1.jpg

  I then clicked start and went to the control panel. Typed in [Color Management] in the search bar in the upper right corner and clicked on it.

  I then clicked [Add] and found the line [sRGB IEC61966-2, 1] and set as the default value. Make sure that your Photoshop color settings are the same. Check by returning Photoshops color settings and the term [workspace] assign an RGB value [sRGB IEC61966-2, 1] then relaunch Photoshop and it should be fixed.

• "no nat-traversal crypto isakmp" after restart

  Hello

  With the version of the Software ASA 8.0, we noticed that whenever restart us tha device, the configuration line:

  No encryption isakmp nat-traversal

  appears in the configuration.

  It is very annoying, because this NAT - T obviously does not work.

  Any of you noticed that too?

  Ideas?

  Thank you very much.

  Marco Pizzi.

  Hi Marco,.

  This is a bug in the version of the ASA 8.x software and there are workarounds:

  CSCsj52581 Details of bug

  No inconsistent configuration of nat-traversal isakmp crypto after reboot

  Symptom:

  After a restart of the ASA at the global order "no isakmp encryption".

  NAT-traversal.

  appears in the running-config even it is not available in the

  startup-config.

  Conditions:

  None

  Steps to reproduce:

  BSNs-ASA5505-1 (config) # nat-traversal crypto isakmp

  BSNs-ASA5505-1 (config) # copy run start

  BSNs-ASA5505-1 (config) # sh run all | NAT Inc

  Crypto isakmp nat-traversal 20

  BSNs-ASA5505-1 (config) # sh start | NAT Inc

  BSNs-ASA5505-1 (config) #.

  After reloading of the ASA:

  BSNs-asa5505-1 # sh run all | NAT Inc

  No encryption isakmp nat-traversal

  BSNs-asa5505-1 # sh start | NAT Inc

  asa5505-BSNs-1 #.

  Workaround solution:

  (1) use a default value, for example, "crypto isakmp nat-traversal 21.

  (2) to activate the "crypto isakmp nat-traversal" after the restart of the ASA if you

  You can use the default value. The default value is: crypto isakmp

  NAT-traversal 20

  Radim

• Bluetooth problems after upgrade to 9.3.2

  I've just updated to ios 9.3.2 and now bluetooth will not allow matching any device that requires the entry of the code because the keyboard does not find which means that you can not pair the device. You can pair if the device does not have a code.

  I first noticed that transmitting and receiving calls was broken after the upgrade on my bluetooth in my car so I decided to wipe down and re-pair phones for the car, the operation failed due to the above problem.

  Here are a few standard steps - they can help - but we are still discovering the nuances of the 9.3.2

  1. Make sure that each device you're trying to pair is in "discoverable".
  2. Control Center - tap bluetooth and turn it on again - 8 - 10 times
  3. Force restart the iPhone - after stopping applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen. Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward
  4. Update to the latest iOS if not done
  5. Settings - general - reset - settings Reset network will need to re enter the WiFi passwords
  6. If the pencil of Apple is connected - "Forget it" and try again
  7. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  8. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• WRT54G V3.0 Web Interface broken after FW update

  I meet the same web interface problem after I updated the firmware, like in the case below, but with my v3.0 WRT54G. The firmware file I upgraded to was WRT54GV4.0_4.21.1_US_code.bin. Will provide you with instructions and decommissioning file name so that I can use the web interface again? I did the steps of resetting, tried a different PC, but get the same problem of web interface. Thanks in advance.

  WRT160nV2 Web Interface broken after FW update. Registration date: 21/05/2009

  Yoohoo!

  Now I know why you have this nickname. Thanks for your help. Problem solved. Web interface works again.

  Must have been the tftp download from the link you provided because I used the same firmware upgrade (WRT54GV4.0_4.21.1_US_code.bin) file I downloaded and tried to install previously.

• Heel of workflow that wfstubbuildingmachine fails after upgrading to 6.1

  After having recently upgraded 6.0.1 to 6.1, we are unable to build machines that call the workflow WFStubBuildingMachine heel. It worked correctly before the upgrade. If we remove this workflow, machines to build then OK, but since we have many elements which occur in vCO (annotations vCenter, created group, new machine name assigned, etc.) which are called by this stubworkflow, construction of machines without it are useless to use.

  
  

  Here are the 3 heel workflows that we have configured through custom properties. Note: We have not any assigned value, but never did before the upgrade either. I guess that a value is not required as long as you agree with vCAC pick up the latest rev of the workflow when it is running?
  

  

  
  

  After asking to build a machine that includes the WFStubBuildingMachine call, there eventually times out and the following error appears in the newspapers:

  

  We tried the following already without success:

  1. We have a ticket open with support. A sev 1 for two weeks now. The ticket is with genius. Substantial quantities of newspapers were provided to support.
  2. We have removed this stubworkflow of plans by removing the custom property and machines very well build.
  3. We left the other stubworkflows in the plans and build machines very well as long as WFStubBuildingMachine is not present.
  4. We also have a problem with the designer after the 6.1 update. I have separately regarding who, as we do not know if it is related or not. It seems that it is maybe not related as the other stubworkflows works fine, but not this one. vCAC Designer (cloudutil.exe) will not start after the upgrade to 6.1
  5. We cannot use designer to crack open the WFStubBuildingMachine workflow, given that the designer is broken (see #4 above).
  6. Everything after upgrading to 6.1 seems to work very well. All of the tabs in the user interface are features. All services that you expect to be running are running on the devices and the server of IaaS. Decommissioning of machine for the "machines" or machines built without WFStubBuildingMachine work correctly, etc.
  7. vCAC 6.1 vCO plugin has been installed/updated. This problem existed before we did the update of the plugin vCO and persists thereafter.
  8. vCAC Workflow Hotfix Package has been applied. This problem existed before we did the update of the plugin vCO and persists thereafter. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2088838
  9. When the upgrade to 6.1, we chose the option "preserve my latest versions of workflow. The CLI via cloudutil.exe, we can see that it has added a new rev for the workflow of WfStubBuildingmachine 6.1 (8 Rev.), then copied to rev again as the last (rev 9). Our previous rev was 8 before the upgrade. Thus, it seems that it worked as expected.

  We are very down because of this. We would prefer not to roll back even if we have good backups, as if no one else knows this problem then VMware will probably not initially get of it, and we will not be able to upgrade to 6.1 down the road with confidence.

  One thing we're curious to know, is if the workflow of personalization as shown in this post below vCO Mathilde be run after the upgrade from 6.01 to 6.1? We didn't as long as it has not listed in guides upgrade, documentation or blog posts, but just curious if someone else did so. We did not want to do this as it will scan what changes have been made to the stubworkflows before he does. http://www.vmtocloud.com/how-to-extend-Vcac-with-VCO-part-1-installation/

  Has anyone seen this or something similar? Even if you do not, you have any suggestions to try?

  In case someone else runs into this problem, here is what has been done to solve with the help of the support team to the development/vCAC:

  1. Open the designer Client.
  2. Load the workflow with the question, WFStubBuildingMachine in our case. Make sure that the latest rev is loaded.
  3. Find the block in the workflow where the issue is encountered. There should be a red exclamation point.
  4. Take a screenshot of the code block and note all code/functions/variables because you will need to recreate it in a later step.
  5. Right-click on the code block and delete it.
  6. Recreate the block in the workflow and to re - establish links with the rest of the workflow.
  7. Download the workflow of heel.
  8. Leave the customer from the designer.

  It seems than the 6.1 update do not recompile / adjust workflows to heel if they refer to the DLL that are upgraded as part of the upgrade process 6.1. Our workflow to heel was making reference to a dll that has been replaced by a newer version of the 6.1 update. Following the procedure above, recompiled the workflow with the new dll.

  It would be nice if the upgrade process vCAC traveled the workflows of heel and made for you or did you call at least. I hope it's something that will be considered for a future version.

• Problem with desktop/taskbar after upgrading Fusion 4 to 6 - Windows 7 VM

  I got a few problems after upgrading to Fusion 4 to 6 with my Win 7 x 64 bit VM Fusion. I use a Mac Pro with the Mavericks. While I managed to resolve most of the issues with a manual installation of the VMWare Tools and reconstruction/reactivate a certain number of broken programs, there is suddenly a new which is serious enough. My office is not displayed, nor is my bar of the shortcut icons for the launch of the program tasks. I can access my desktop to the user manually folder and all the "stuff" is there. " If I run a program from the icon appears in the taskbar, but it cannot be pinned. When I access more nothing, I get this popup (see image). I'm sure that's the issue. Anyond can suggest a solution, please?

  Hello

  The network error is gone I hope?

  You have to set up folders mirrored under sharing with OS X? (Menu-> Virtual Machine-> settings-> sharing-> mirrored folders). If you use mirrored folders there, then what happens if you turn off this feature to test and see?

  I don't use this feature myself, but imagine that allowing a case mirrored for Office could eventually hide something on the side of windows.

  --

  Wil

• Help does not launch after upgrading to RH7 RH5

  My problem is similar to to CaroMe1. Topics in the chm files created with RH5 and integrated in our software product launch correctly when the user clicks a help button in a dialog box. After upgrading to RH7, using the same project file chm files, created using RH7 does not launch at all. in other words, nothing happens when the user clicks a help button on a dialog box.
  
  Thanks in advance for any advice!

  After some research, I found this on importing: files:
  http://help.Adobe.com/en_US/RoboHelp/rhtml/7.0/context-sensitive/Map_IDs_and_map_files/IMP orting_map_files.htm

  I checked my project and this is! There is my file: with a broken link icon. No h in the project file. I copied it from the previous version, recompiled and it works like a charm now.

  Thanks for your help!

• Time Machine does not work after upgrade to Sierra

  The Time Machine (TM) fail to start backup and there is still "preparing backup...". "for more than an hour. This right after upgrading to Mac OS Sierra.

  Another weird thing happens to the toolbar of the Mac Mail. The Junk button is replaced by another button. trying to put back in place, but remove the button become a button.

  Please help with the backup problem mentioned above. Thank you much in advance.

  How long have you waited? After a new installation, it must be a fair while even with a SSD to prepare the first backup due to the number of modified files.

  Make sure the TM drive is in the list of items excluded from Spotlight indexing. ICloud newsletter and other cloud services.