quick question on the DMZ and networking

Similar Questions

• A quick question on the microphone and speakers of M4

  The volume level seems a little weak because people appearing on the line does not hear me. As I do not have the right. A simple test with dictaphone (according to Google room of course) shows a very low level of entrants seems so I can't hear the recording properly with volume maximum speaker level of music (which placed on the lower edge). The volume level of the General enclosure (on top of the phone) is also lower it should be comfortable. I know that the M4 is waterproof and the microphone hole is covered with something, but do the things normal volume for this kind of phones? Own phone for a week.

  Thanks in advance and sorry for grammar mistakes.

  @StasGrim

  Start safe mode

  http://talk.sonymobile.com/T5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008

  > settings > about phone > diagnostics > test your phone

• Just a quick question about the appearance of the cluster

  Hello, this is Matthew, just a quick question about the appearance of the cluster

  Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...

  What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".

  Is there a quicker way to deal with?

  THz so much!

  You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.

• Configuration of the DMZ and USER-BASE10

  Hello

  I've been using System DMZ1 variables... 3 and USER-ADDRS1... 5 to identify the different networks. However, I was wondering, what is the difference between the DMZ and USER-BASE10? It is in the name, or they are used in different ways by some aspects of the software?

  Kind regards

  Matt

  There is no difference. They are purely just names. The sensorApp just treats them as variables that can be used to specify filters.

• How to provide a botton that takes a quick measure of the Isc and VOC?

  Right now I have a program that allows to measure Voc, Isc and the efficiency of the solar cell. How to provide a botton that takes a quick measure of the Isc and VOC and displays the result next the botton? I want to do this because I want to know VOCS and SAIS before hand, so that I can set the amplitude of scanning. In addition, I also want to set the initial time in seconds. At present, the time is 3 seconds, I can't find where to put them, is 3 seconds by default.

  Button not botton.

  It will be similar to what you have already in your another thread.

  Did you take the tutorials since then?  I highly recommend you do.

  LabVIEW Introduction course - 3 hours
  LabVIEW Introduction course - 6 hours

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• CAN´t access my files on creative cloud. "Temporarily unavailable page. We will be back soon. "' We are working quickly to resolve the problem and apologize for the delay." Check back later or visit our website for updates of status. In addition, you can

  Hello

  Since a few days I tried to access my files on web creative cloud without success. I ve had this message only:

  "Temporarily unavailable page. We will be back soon. »
  "We are working quickly to resolve the problem and apologize for the delay."
  Check back later or visit our website for updates of status.
  In addition, you can get help in forums of the creative cloud.
  Thank you for understanding! »

  (I used Google Translate)

  Help someone?

  Not sure if you've managed to solve this problem yet or not. I do not no what are the contents of your proxy script, but it's something that you (or your company) you have to solve.

• A question about the methods and parameters.

  Hey guys, this is my first post here. I am very new to Java and done a bit of C++ before Java. I had a question about the methods and parameters. I do not understand the methods; I know they can be repeated when it is called, but it's almost everything. I also know that a program should have a class that contains the main method. What I really, really understand on methods is what the parameters are. I know they are in parentheses and that is it. Could you explain what they are? I really appreciate it. Thanks to all in advance. Best regards, Michael

  Taking an example:
  Suppose you calculate area of the rectangle you need two inputs one is the length and the width. Area = l X b, where l = length, b = width

  If your method, say, calculateAreaOfRectangle (length int, int width) will be two parameters as arguments.

  System.out.println ("field of rectangle:" + calculateAreaOfRectangle (40,30);)

  public int calculateAreaOfRectangle (int length, int width) {}
  int area;
  Area = length * width;
  return of area;
  }

  So if you call this method then the output will be returned in 120.

  Parameters of a method are simply the input variables for the method of treatment for all calculations or something useful.

  And we cannot have methods inside the main method in Java. It is in the java syntax and if you do, it will throw a syntax error.

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

• tests of the device for the time of the ASM and Network Protocol (NTP)

  Hi all.
  I try to install Infratruction grid Oracle 11 g R2 amd oracle Linux OS but
  I got the following error.
  
  tests of the device for the time of the ASM and Network Protocol (NTP)
  can someone guide me what should I do for them?

  in RAC 11 GR 2, the option to synchronize the time between the nodes are ntp or ctss.

  If you want to use ntp add the - x option in/etc/sysconfig/ntpd (for example OPTIONS = "-u ntp:ntp Pei /var/run/ntpd.pid x")

  Hope this helps

• Quick question on the layers panel and adjustments - Photoshop CS6

  The layers and adjustments panels always used to be expanded from the moment that I started the program; recently, they have been housed closed and I have to develop each time. Someone knows how to fix this? I've been setting up with it, but its kind of irritating...

  Thank you
  Benjamin

  Reset the preferences has been known to clear up the problems, especially if things were functioning normally before.

  Hold Ctrl-Alt-Shift (assuming Windows) and start Photoshop. Agreement for the Reset and see if all this is not back to normal.

• Quick question on the button symbols and simple roll overs

  I'm prototyping bee my last several websites in Fireworks in front of her a coding in Dreamweaver. I see two ways to accomplish the same thing and wonder if there is any advantage to one or if it's just a user preference of how to do it.

  When you create a single roll on it seems that this can be done in 2 ways:

  (1) create a slice around the image, and then, in the range, select creatte a behavior simple reversal.

  (2) convert the image into a button symbol and then change the symbol to add more force.

  Both are simple ways to do so. There their advantage to one or the other?

  Fireworks is more powerful, while many think. Not always the best code bit large layout and comping tool!. While you work more with web pages, you can learn how to make CSS based menus in Dreamweaver :-)

• A few quick questions about the Satellite P300 - 18 M

  Hello

  I am about to order a Satellite P300 - 18 M and have just a few questions about this:

  (Although these may apply for other similar Satellite/Equium P300.)

  Is the touchpad made by / to use the Alps or Synaptics driver?

  It has the Wireless N network card, is the map made by Intel or Realtec?

  And also, someone has experience with face recognition software to connect?

  If so, does it take a lot of time to initalise?

  Thanks in advance,
  Jack

  Hello

  The P300 - 18M belongs to the PSPCCE series.
  It uses the two touchpad drivers. Synaptics & Alps Electric
  There is an Intel 802.11agn minicards WLan installed

  The face recognition is a nice tool but local to be illuminated and you must take your face the right of the post sometimes it of not very easy

  But if you face is recognized correctly that the connection should work properly

  See you soon

• Questions on the WLAN and AP Manager interface

  Hello

  In fact, I was searching in the internet for more information on the (the AP Manager interface), I've only had the following link on the configuration of WLC.

  http://www.Cisco.com/en/us/docs/wireless/WCS/7.0/Configuration/Guide/7_0admin.html

  -If you have more information about this interface, share with me pls

  My second question is about the WLAN. In fact, I connected the AP lightness to the controller directly via a private network and configured WLAN with SSID. The question im face that customers can see the SSID, but can not be associated. I mean the packets sent is complete but the packets received too low, so I can't access the net.

  How can I solve this problem?

  Should I SWITCH to connect 3 AP light to the controller and the location device? or its just to connect these APs and the controller directly to our private network, because we use the same subnet.

  Thank you

  concerning

  Hello

  The link below can give u some info and you can be knowing this as well

  http://www.Cisco.com/en/us/docs/wireless/controller/5.2/configuration/guide/c52mint.html#wp1117288

  Then regarding the WIFI network... If you are able to see the SSID but not able to associate... What is the quthentication and the encryption is we help? We receive the IP or not?

  Private network means? the WLC will connect to the switch, right?

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• Quick questions on the CC student kit

  I tried to search the FAQ or customer support, but couldn't really find something where I could just after a small question about the recognition of things so... If you know what I'm looking for already feel free to guide me where to look for it.

  I was therefore interested to the kit of the CC student which includes all applications a year. (think it says about 2000 Swedish kronor, which is roughly around 200 euros).
  And so I saw was one of the best idenfications using your email from the school which includes stuff like ".edu".  The problem is that I have one, but only use us it as a registering or connect the credentials for our orders online. If this isn't an email that I can receive emails since then, so I'm just wondering if all I had to do was use it as a registering or the legitimacy that I am a student, or if it must be signed using this specific e-mail. I could talk about technology in school and get it set up, but he mentioned that it is somewhat lengty and or boring process then advised me to see if it was as a registering first egible before again us.

  If you know where I could have found this info in FAQ or similar stuff please let me know, otherwise I'd like a few quick answers to this. See you soon!

  Hi Nyom,

  I order to buy creative cloud subscription, you must have a valid email ID where you can receive by e-mail sent by Adobe.

  Given that the address you have is not where you can send or receive e-mails, you can go ahead and use a personal e-mail ID.

  If you purchase the subscription using an ID, you may be asked to provide additional proof of eligibility.

  Please see the shared document:student software discounts, the eligibility of the student. Adobe

  Please update the thread in the case of all other applications.