tests of the device for the time of the ASM and Network Protocol (NTP)

Similar Questions

• RMAN to the ASM and network file system

  Hi all
  
  I use Oracle RAC 11 g R2 + ASM.
  I am new to RMAN, but I am trying to build daily tasks to do below:
  
  1. backup of my database to the FRA located on ASM diskgroup + FRA.
  2. at the same time I want to save my database for Network File System (NFS) to be taken by system administrators to an archive location that I can't access. Since according to my knowledge can't copy files to ASM for outside... so for this I'm planing to use the command format of the NFS mount point.
  3. on daily basis in the NFS file will be taken by a work (that I am not responsible for) to the Archive, and then it will be purged from this location.
  4. I am planing to have my windows of 15 days retention strategy.
  5. on every day, I am planing to cross check my backup and then delete the expired so that taken from NFS in the journal of the archives is deleted.
  
  The RMAN I am planing to run it on a daily basis are:
  

  backup incremental level 0 cumulative device type disk tag 'FULL_DB_INCR_LV0' database; -- this will be to the default location (+FRA)
  backup incremental level 0 cumulative device type disk tag 'FULL_DB_INCR_LV0' database format 'NFS/oracle/backup%U';--another copy to be taken to the archive location
  crosscheck backupset;
  delete expired backupset; -- this will delete the backups taken to the Archive location

  Now my questions:
  
  1 what good solutions? take account of the fact that I need backup on the file system of the operating system so that the jobs of system administrators take the backup of their archives.
  2. If a backup is needed, I use CATALOGUE START WITH to recover and then recover.
  3. because my retention period is 15 days, and the backup in NFS files will be deleted on a daily basis, so this retention will apply for backups in ASM, is this a problem?

  Hello

  Easy way is to use the tag. Find the number of backupset is a difficult task.

  Create a template for your tag with a date.

  How to use the Substitution Variables of orders RMAN [427229.1 ID]

  How to use the tag name of RMAN with different attributes or variables. [580283.1 ID]

  You can check which backup doesn't have a copy on NFS using the query below:

  SELECT   BS.RECID BSKEY,
    BP.RECID KEY,
    BP.RECID RECID,
    BS.PIECES PIECECOUNT,
    BP.HANDLE FILENAME,
    BP.TAG TAG,
    BP.COPY# COPYNUMBER,
    BP.STATUS STATUS,
    BP.PIECE# PIECENUMBER
  FROM V$BACKUP_PIECE BP,
    V$BACKUP_SET BS
  WHERE (BP.SET_COUNT = BS.SET_COUNT
  AND BP.SET_STAMP    = BS.SET_STAMP)
  order by  bskey,copynumber
  

• How to check the space on the asm and raw device?

  Hi all
  
  I want to know how to check the space on the device of the DSO.
  We use a feature of the asm, which is on a raw partition.
  Our archive is full. I need to check the space on asm archve partiotion.
  How can I check the destination space archive?
  We are using partition raw device for crs and voting system.
  How can we check the space on the raw device and how do know us which device is currently in use and are not in service
  
  Thanks in advance

  4 - 5 raw partitions...
  What version of oracle?
  Install the OCR + VOTE in gross unit better than OCFS2. If you use 10g to 11 GR 1 material.

  If use 11 GR 2, take the OCR + VOTE in ASM disk group.

  You can check what raw OCR device:
  $ ocrcheck

  VOTEDISK:
  $ crsctl query css votedisk

  On 10g if using the raw device for OCR + votedisk: recommend 1 file = 250M
  11g recommend 1 file = 512M

  Good luck

• quick question on the DMZ and networking

  Need help please, I am a newbie to vm and need quick help...

  I have a well-configured firewall and 1 Server ESXi 5.5 configuration to test only at home...

  My firewall has 2 ports for internal network and one connected to my ISP

  I have the internal ports

  Port LAN ip 1 local schema with DHCP server running on the firewall

  Port 2 is DMZ, I have 4 static ip to use for remote mail, web server

  on an ESX Server, I have 2 NICs 1 plugged into port DMZ and LAN 1 port firewall

  What is the best way to separate these 2 and make them work

  internal vms example has no access to the DMZ and will have no LAN NIC, added to the virtual machine

  But Web servers and mail server should have connected NIC times and each nic gets entered the appropriate IP address based on what network card and the network it uses

  Can I use 1 switch vm and vm 1 network? or 1 vm change and create 2 networks? How to configure NIC and vmnetworks to communicate properly?

  Since you have two separate network, an in-house cards and a demilitarized zone, you will need two vSwitches. Each with a network card. The first will be your internal network and management, the other for the demilitarized zone.

  Then, you will need to create the appropriate exchanges.

• Time to Smartphones blackBerry and network devices are different - why?

  My time of the device and network are different in a few minutes. My friends BB is different about 1 hour.

  -Why is this?

  -How do I fix this?

  Unit does not automatically refresh its time.

  What are you time settings? Network or BlackBerry?

  While in Date/time settings > Menu > update time and it will update the time according to the network.

• View Composer or View Manager need most of the CPU and network?

  Hello

  I intend to start experimenting with the customers see 6-8 to find the notion of vView...

  I installed View Manager to a virtual machine: (x 64) svr Win2008 connected to the same subnet that all thin clients in the view are connected.  My VCenter server where I installed View Composer works to a dedicated old (physical) (x 64) svr Win2008 connected to the view Manager / computer thinclient subnet via a 100 Mbps firewall.

  More traffic view CPU and network for thin clients would be the composer or Manager?  I wonder if the 100 Mbps "bottleneck" and the former composer server hardware will be a problem.  Or it's okay with such a low customer account...?

  Second, the View Composer installer asked a database connection.  He would be allowed to use the same (SQL Express?) as the Installer installed VCenter?  If Yes, where can I find information about how to create a composer under SQL Express database...?

  Thanks for the comments on these issues

  Best regards

  Tor

  Customers of 40-50 reviews could be possible in SQL express without a lot of questions. Go through your response, it is clear that the subnet22 is the network that will be using the network more than any other w.r.t. view desktops. (and your assumption is right).

  The network configuration in the ESX to connect virtual machines to the Subnet22, this is called VMNetwork

  User name by default and passoword for the SQLExpress will be the account used to connect and install the server vCenter in windows machine (it is windows authentication). You can connect as below.

  • Download and install SQL Management Studio from the microsoft Web site in the virtual center host operating system
  • Open SQL studio, then click on connect, the server name is "localhost\SQLEXP_VIM" and select windows authentication
  • This way you can manage SQL express and create the new database.
  • You can also view the DSN for vcenter server which automatically created during installation

  Most of the VirtualCener servers are VMs I believe, but according to my understanding, both are very popular.

  Defenitly peacekeeping vCenter in VM have a lot of benefits and felxibilities.

  Thank you

  Siva

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Does not save the Config parameter: Network.protocol - handler.expose.file

  In "subject: config" I put
  Network.protocol - handler.expose.file = false
  in order to open the files and folders in external applications, and not in FF.
  But when Firefox closes it removes this setting of prefs.js
  When Firefox starts and it is WRONG in prefs.js then it sets it to true.
  How can I curcumvent that?
  I want to keep it FALSE.
  Thank you.

  27 FF and don't offer me to Australis.

  I found the solution: the value "noscript.fixURI" = false (in "subject: config" or in prefs.js).
  Problem was caused by too defensive noscript.

• Satellite S3000 - X 4: the screen is blank on the battery and network

  Satellite S3000 - X 4 with problems screen empty.
  The machine works with an external monitor connected. BIOS updated to 1.60, latest video drivers installed on Intel site. Installed power of Tosh management. Screen is blank on the battery and the system. No obvious response to listen autour mainboard or FL Inverter - or monitor itself.

  Have you tried to reduce video settings in the power management of Tosh as suggested by someone else. Is FL Inverter probably at fault - if yes, where is the best / cheapest place to get a replacement to the United Kingdom?

  Hello

  As you know all the parts, you can order by the service partner. If you know what are the parts that you need you can also Google around a bit and I'm sure you can find enough hardware stores online where you can compare prices and order cheaper.

  Sorry, I'm not from the United Kingdom and may not give you a good info. Also, do you want to exchange it only?

• If I use my system for some time (say 15 minutes) and the system automatically disconnects I want to open it as administrator

  Saving a system using win + L or an automatic log out after awhile and then to connect it will open in the same account that she used last time. I still want to ask an administrator password before returning inside the system.

  Uzair,

  The short answer is - you can't do what you want to do.

  Deletion of all accounts & just running things an Admin account will make it easier for horses Trojans enter your system - see Why use a standard account instead of an administrator account?  [you can also see this information in the help file of the computer management window].

  You should then be in using a Standard account for daily activities & keeping a password protected administrator account just for authorising facilities, etc.  This, judging from your description seems to be exactly what you are doing.

  I should also mention something else I want to give you half a story.  Make a second password protected administrator account.  From any account may suffer from corruption of the user profiles to use, your current Admin account could one day be the account who suffers from this corruption of the user profiles.  Having another Admin account as a reserve protects you against this possibility - it could then enter the system using the second Admin to fix things.  You should also make a password reset disk for each account on the computer.

  All the best,

• I scanned in the tests that I need for an evaluation of student teaching and they are all in a single document and I need to break. How can I do this?

  Title says it all

  No Adobe Reader (the purpose of this forum). With the help of Acrobat you can extract single pages or ranges of pages to new PDF.

  Be well...

• Creative cloud download process has been the same for a time tried to restart and redownloading earlier, same problem every time I do what?, creative cloud download process has been the same for an hour, tried to restart and redownloading earlier, even

  you are * me, help

  Hi angelina,.

  Please, try the following steps:

  (1) uninstall Adobe CC (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)

  (2) restart the machine.

  (3) install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• View of the horizon and 'Blast' Protocol

  Hello

  I have recently updated our login servers and security to view Horizon 5.2 and I see the option to enable HTML5 pool access, but it indicates that an office feature pack must be installed.  I was not able to find this "feature pack" anywhere.  I've been through the administrative guide for 5.2 and it really do anything don't speak HTML access.

  Can someone point me in the right direction so I can start to do some tests with HTML5 access to desktop from view?

  Thank you!

  According to the notes of https://www.vmware.com/support/view52/doc/horizon-view-52-release-notes.htmlversion:

  These components will be available shortly after the general availability of VMware View Horizon 5.2 and may subject to availability of the app in various application stores mobile device.

  I feel your pain, I was really looking forward to test access HTML 5.

• Satellite L500 - cannot turn off the WiFi and network icon changing itself

  Hello

  I have a Satellite L500-1GL (comes with Win 32-bit =) and since I installed the latest updates I can not disable the wireless function. When I use the shortcut key to activate or disable the indicator led is turning on and off, but the wireless feature is always turned on and even the icon which shows the network connection, itself changes without doing something with it.

  A few times it shows Red Cross (as she has no connection), but says: connected. When I use wireless connecton always displays the cable connection icon. most of the time, when he should have been showing the strength of the signal.

  This is reaally annoing. Please help me solve this problem.

  Hi danihun,

  > since I installed the latest updates I can not disable the wireless function.
  The updates you have installed exactly?

  In your case, I would try a system restore to an earlier point.
  Check this box!

• What is this name strange device for my HP 1536dnf printer on my network?

  
  

  Hello

  I checked a similar printer: as I thought, the number indicates a number of physical hardware, but not one I just

  The characters are derived from the mac address of ethernaet card.

  You can see it listed in the homepage of the device: status > Device Configuration IPv6 address, the last 6 characters will be used.

• XP 64 bit VERY slow to access the directories and network drives

  We have some Dell Precision workstations of the very high-end with 24 GB of RAM and 4 CPUs to four hearts.  When users use workstation on a network drive, it may take up to a minute before the directories appear.  The flashlight may appear.  This latency is frustrating.

  However, in Windows Explorer, it's almost instantaneous.

  Users prefer to use the workstation.

  Any suggestions?  Thank you.

  27/01/2011 14:33 Roger Denver wrote:

  We have some Dell Precision workstations of the very high-end with 24 GB of
  RAM and 4 CPUs to four hearts.  When users use on a workstation
  network drive, it may take up to a minute before the Show directories
  SPH flashlight may appear.  This latency is frustrating.

  However, in Windows Explorer, it's almost instantaneous.

  Users prefer to use my Computer.Any suggestions?  Thank you.

  Select and delete the key {D6277990-4C6A-11CF-8D87-00AA0060F5BF} to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\RemoteComputer\NameSpace

  Usual warnings and precautions apply when you change the registry...

  John