Quick question on Version after installing the Patch Bundle

Similar Questions

• BSOD on reboot after installing the patch MS10-046

  I installed the critical patch MS10-046 on a netbook under XP SP3. On reboot, bsod with error message:

  "The Shell32.dll image is possibly corrupt. The header checksum does not match the checksum calculated. »

  The only way to start was via a USB key. I ran checkdisk (chkdsk/r) on the disc, and it found no errors. Then I copied an older version of the shell32.dll (from installation files) file in the system32 folder and could restart normally. I reinstalled the patch with the same result (bsod on startup), once again replaced the shell32.dll file. Automatic updates is asking to install the patch, but I don't do that until knowing what is the question. (It is set to download but not install).

  The system running Avira antivir personal, but I have another machine with XP and Avira and no problem.

  Any ideas?

  Your computer may have TDSS, a rootkit.

  This rootkit expected that some parts of Windows in certain locations in memory. When Microsoft released (MS10-046), the location of the core Windows API driver who depends on TDSS changed places. When a machine is rebooted to apply the fix, the rootkit tries to modify the memory that is no longer part of Windows target.

  Result? Blue Screen of Death.

  It's in the news just now:

  http://www.InfoWorld.com/t/Windows/Microsofts-patch-Windows-shortcut-flaw-has-limitations-822

• Quicken 2009, operation Bank release 7 updates to update hangs after installing the patch for IE8-KB974455

  The only solution I have at this point is to uninstall the patch KB974455.  Y at - it a patch of replacement to fix this problem?

  Hi Ranson J. Ricks,.

  Welcome to the Microsoft Answers Community Forum site!

  Yes, we have a patch to replace 974455 KB. You must visit the link mentioned for more information on the new patch of below replacement.

  http://support.Microsoft.com/default.aspx?kbid=976749

  Hope this helps and solves your problem!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• After installing the version 36.0 whenever I go to a Web site, I get "server not found" and I have to refresh

  After installing the version 36.0 (yesterday) on the desktop and laptop, whenever I go to a site that I get "server not found" and I update the site to access.

  I checked my firewall and it is configured correctly.

  And I changed the proxy for 'no proxy '.

  Still not fixed.

  Thanks in advance.
  David

  I went back to the 35.0.1 version and it seems to have solved the problem.

• How to install the patch for the security hole last QT process running on a Dell with Windows 7 (Windows 10 upgrade) laptop? I got a message from my program called Belarc that the patch is missing on this device. Thank you

  How to install the patch for QuickTime Pro for Windows 7 on a Dell laptop... I got an alert through a program which I run from time to time (Belarc) and it says that there was a security breach detected by Apple (or one of its vendors, who manages the security of the operating system such as Cisco) during December 2015.

  Please notify.  Thanks in advance for your guidance pertaining to my question.

  Download QuickTime for Windows - Apple 7.7.9

  Apple ends development of QuickTime Player 7 for Mac and Windows operating system, so don't expect much more beyond this last version.

  The installation shows are supported for Windows 7 and lower, so I don't know what to expect on Windows 10.

• After installing the latest updates, my screen on large icons, screen too big for my moniter

  the only way of difficulty was to uninstall updates.

  After installing the latest updates, my screen on large icons, screen too large for my moniter the only way of difficulty was to uninstall updates.

  Sounds like something in the update causes a conflict with your video driver or change the resolution settings.
   
  The first thing to do to solve the problem is to try to install each of the updates one at a time instead of let Windows Update do several updates together.  If you're lucky, the problem can not ride again.  If so, you'll know at least update is the cause of the problem.

  If the problem persists, try right click on an empty area of your desktop and select properties to open the display properties dialog box.  Select the settings tab.  Look to see if the screen is correctly identified and if the resolution seems correct.  If you spot something wrong, change to the correct setting.  If everything looks correct, you can try to change the resolution to see if that can solve the problem.

  You can also check the website of the manufacturer of your graphics card to see if they have an updated display driver.  Updates of the operating system only sometimes work correctly if you have the latest version of the drivers for the various components.

  If all else fails, you can uninstall the update one that is causing the problem and mark do not show you this update again in Windows updates.   Doing so will be considered a last resort - especially if the update in question is one of the security updates.

• Oracle of the MAF: Cannot install the Patch of MAF (2.0.0.0.41.140623.0901)

  OPERATING SYSTEM: OS X 10.9.4

  JDev: 12.1.3

  Hi all

  I didn't know that there was a patch for 12.1.3 for the MAF to the Oracle. So I tried to update, looked ok, that was until I went back into the center of update and the update was still there. I then ran JDev via the command line (remember I use OS x and Windows not) and got the following result:

  
  

  ***************************************************************************************************************************************************

  Installing updates...

  Installing the Patch Users/EdZz/.jdeveloper/tmp/update/p18030351_20000_MAF_Core.zip...

  Setup Oracle interim Patch version 13.2.0.0.0

  Copyright (c) 2014, Oracle Corporation.  All rights reserved.

  Oracle homepage: / oracle/jdeveloper/12_1_3/jdeveloper /...

  Inventory Center: / Users/EdZz/oraInventory to: / oracle, jdeveloper, 12_1_3, jdeveloper /... oraInst.loc

  OPatch version: 13.2.0.0.0

  YES version: 13.2.0.0.0

  Location of the log file: / oracle, jdeveloper, 12_1_3, jdeveloper /... /cfgtoollogs/opatch/opatch2014-08-29_10-46-58AM_1.log

  OPatch detects the House of Middleware as ' / oracle/jdeveloper/12_1_3.

  August 29, 2014 10:47:06 oracle.sysman.oii.oiii.OiiiInstallAreaControl initAreaControl

  INFO: Install box control created with the access level 0

  Application of the interim fix '18030351' to the OH ' / oracle, jdeveloper, 12_1_3, jdeveloper /..'

  Check the environment and performing preliminary controls...

  The following patches are already installed in the home of the Oracle.

  [18030351]

  Please roll back existing identical patches first.

  Phase change system OPatch failed to start:

  Location of the log file: / oracle, jdeveloper, 12_1_3, jdeveloper /... /cfgtoollogs/opatch/opatch2014-08-29_10-46-58AM_1.log

  ***************************************************************************************************************************************************

  I didn't know what was going on, so I checked in the last log file, opatch2014-08-29_10-46 - 58AM_1.log, to see what was going on...

  
  

  ***************************************************************************************************************************************************

  29/08/2014 [10:47:06]     OPatch invoked as follows: "apply - silent /Users/EdZz/.jdeveloper/tmp/update/p18030351_20000_MAF_Core.zip - invPtrLoc/oracle/jdeveloper/12_1_3/jdeveloper /... oraInst.loc '".

  29/08/2014 [10:47:06]     YES-67077:

  Oracle homepage: / oracle/jdeveloper/12_1_3/jdeveloper /...

  Inventory Center: / Users/EdZz/oraInventory

  from: / oracle, jdeveloper, 12_1_3, jdeveloper /... oraInst.loc

  OPatch version: 13.2.0.0.0

  YES version: 13.2.0.0.0

  YES location: / oracle, jdeveloper, 12_1_3, jdeveloper /... / Yes

  Location of the log file: / oracle, jdeveloper, 12_1_3, jdeveloper /... /cfgtoollogs/opatch/opatch2014-08-29_10-46-58AM_1.log

  29/08/2014 [10:47:06]     History of patch file: / oracle, jdeveloper, 12_1_3, jdeveloper /... /cfgtoollogs/opatch/opatch_history.txt

  29/08/2014 [10:47:06]     OPatch detects the House of Middleware as ' / oracle/jdeveloper/12_1_3.

  August 29, 2014 10:47:06 oracle.sysman.oii.oiii.OiiiInstallAreaControl initAreaControl

  INFO: Install box control created with the access level 0

  [August 29, 2014 10:47:06]   From ApplySession Fri Aug 29 10:47:06 2014 WST

  [August 29, 2014 10:47:06]   Starting apply Session to Ven. 29 aout 10:47: 06 2014 WST

  [August 29, 2014 10:47:06]   OPatch will do the following:

  [Discovery of oracle Home]: Configure and Validate Oracle Home information.

  [Prerequisite to apply]: invoke the prerequisites to see if the patch can be applied.

  [Patch conflict detection to apply patch]: check if no conflict with already installed patches at Oracle.

  [August 29, 2014 10:47:06] - Oracle Home discovery -

  [August 29, 2014 10:47:06]   YES - 67086:ApplySession fix provisional application '18030351' to OH ' / oracle, jdeveloper, 12_1_3, jdeveloper /..'

  [August 29, 2014 10:47:06]   Application of the interim fix '18030351' to the OH ' / oracle, jdeveloper, 12_1_3, jdeveloper /..'

  [August 29, 2014 10:47:06]   Start applying the patch to local system to Ven. 29 aout 10:47: 06 2014 WST

  [August 29, 2014 10:47:06]   Check the environment and performing preliminary controls...

  [August 29, 2014 10:47:24] - cars type dectet -

  [August 29, 2014 10:47:24]   Start the initScript apply to Fri Aug 29 10:47:24 WST 2014

  [August 29, 2014 10:47:24]   Complete the initScript apply to Ven. 29 aout 10:47: 24 WST 2014

  [August 29, 2014 10:47:24] - required to apply.

  [August 29, 2014 10:47:24]   Prior running check...

  [August 29, 2014 10:47:24]   YES-67632:

  The following patches are already installed in the home of the Oracle.

  [18030351]

  Please roll back existing identical patches first.

  [August 29, 2014 10:47:24]   OPatch will clean the directories "scratch, backup.

  You will always be able to restore patches after this cleaning.

  Do you want? [y | n]

  [August 29, 2014 10:47:27]   Y (auto-répondu by - silence)

  [August 29, 2014 10:47:27]   The user responded with: Y

  [August 29, 2014 10:47:27]   Size of the directory ' / oracle, jdeveloper, 12_1_3, jdeveloper /... / .patch_storage "before cleaning is 110078213 bytes."

  [August 29, 2014 10:47:27]   Delete the directory "/ oracle, jdeveloper, 12_1_3, jdeveloper /... /.patch_storage/18030351_Jun_23_2014_12_49_34/Backup.

  [August 29, 2014 10:47:27]   Delete the directory "/ oracle, jdeveloper, 12_1_3, jdeveloper /... /.patch_storage/18030351_Jun_23_2014_12_49_34/Backup.

  [August 29, 2014 10:47:27]   Size of the directory ' / oracle, jdeveloper, 12_1_3, jdeveloper /... / .patch_storage "after cleaning is 110078213 bytes."

  [August 29, 2014 10:47:27]   UtilSession: Save for the restoration area was cleaned. For a complete list of files/directories

  removed, please see the log file.

  [August 29, 2014 10:47:27]   YES - 67005:OPatch phase of changing the system will not start:

  [August 29, 2014 10:47:27]   YES - 67035:System is intact, OPatch will not restore the system

  [Aug 29, 2014 10:47:27 AM]   --------------------------------------------------------------------------------

  [August 29, 2014 10:47:27]   The following warnings occurred during execution of OPatch:

  ([29 August 2014 10:47:27] 1) YES-67632:

  The following patches are already installed in the home of the Oracle.

  [18030351]

  Please roll back existing identical patches first.

  [Aug 29, 2014 10:47:27 AM]   --------------------------------------------------------------------------------

  [August 29, 2014 10:47:27]   Ven. 29 aout 10:47 ApplySession finish: 27 WST 2014

  [August 29, 2014 10:47:27]   Total time spent waiting for user input is 0 seconds.  Ven. 29 aout 10:47 finish: 27 WST 2014

  [August 29, 2014 10:47:27]   Location of the log file: / oracle, jdeveloper, 12_1_3, jdeveloper /... /cfgtoollogs/opatch/opatch2014-08-29_10-46-58AM_1.log

  [August 29, 2014 10:47:27]   Description of the battery: oracle.opatch.ExitOPatchException:

  [August 29, 2014 10:47:27]   StackTrace: oracle.opatch.opatchprereq.PrereqIdenticalPatch.buildOutputPrereqResult(PrereqIdenticalPatch.java:308)

  [August 29, 2014 10:47:27]   StackTrace: oracle.opatch.opatchprereq.PrereqIdenticalPatch.prereq(PrereqIdenticalPatch.java:85)

  [August 29, 2014 10:47:27]   StackTrace: oracle.opatch.opatchprereq.PrereqAPI.checkIdenticalPatch(PrereqAPI.java:11787)

  [August 29, 2014 10:47:27]   StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:5558)

  [August 29, 2014 10:47:27]   StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3339)

  [August 29, 2014 10:47:27]   StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5380)

  [August 29, 2014 10:47:27]   StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:2314)

  [August 29, 2014 10:47:27]   StackTrace: oracle.opatch.OPatch.main(OPatch.java:660)

  ***************************************************************************************************************************************************

  This is my current of MAF oracle extensions installed:

  

  Any ideas?

  There is a bug where even after installation of the patch you will see in the center of update.

  But with the version in the image sound joint extension done.

  That IS the only thing that you wanted to talk, or there are also other issues?

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• My MBP in trouble after installing the Wacom Intuos driver.

  My MBP takes almost 5 minutes to start after installing the Wacom Intuos driver, I remove and reinstall but no change!

  and it seems that the machine was very unstable and very slow, sometimes the beach ball appears and no response for a few minutes and works again!

  I try to contact Wacom support in Hong KONG but still no body to answer my call...

  Can be resolved by upgrading to IE captain? Thank you very much!!!

  Wacom driver: 6.3.15 - 1

  News by cheque to be:

  EtreCheck version: 2.6.6 (226):

  MacBook Pro (13 inch, late 2011)

  MacBook Pro - model: MacBookPro8, 1

  1 2.4 GHz Intel Core i5 processor: 2 strands

  4 GB of RAM expandable

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 87 - SN = W01457N9TD3BA

  Intel HD Graphics 3000 - VRAM: 384 MB

  Color LCD 1280 x 800

  OS X Mavericks 10.9.5 (13F1507) - since the starting time: 4 hours

  Disc information:

  HGST HTS721010A9E630 disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  1 t MBP (disk0s2) /: 999,35 go-go (590,22 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ - 8À8)

  Configuration files: (Does that mean?)

  / etc/hosts - Count: 57

  Startup items: (Does that mean?)

  PenTabletDriver: Path: / Library/StartupItems/PenTabletDriver

  Startup items are obsolete in OS X Yosemite

  Launch system officers: (Does that mean?)

  [loading] com.apple.RemoteDesktop.plist -invalid signature!

  [loading] com.apple.screensharing.MessagesAgent.plist -invalid signature!

  Top of page process CPU: (Does that mean?)

  55% mdworker (3)

  4% kernel_task

  4% WindowServer

  2% fontd

  2% hidd

  MacBook Pro, OS X Mavericks (10.9.5)

  Speed up boot times-

  Start time - speed (2)

  Start time - speed (3)

  file/etc/hosts - fixing a pirate

  You might also consider adding more RAM. 2 places I've seen recommended more to buy reliable RAM are below. I have bought RAM several times to other World Computing and have always been very satisfied with the product and the service. They have instructions online on how to replace the RAM. OWC has also tested the RAM above what Apple says, it is the maximum. Now, I have 6 GB installed on an iMac 2008 so-called beginning limited to 4 GB and noticed an improvement.

  Crucial

  Other World Computing

• I can't create an installer, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  I can't create an installer on LabView, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  Hi, Shada, this can happen if you include additional installers to your installer for example DAQmx. When you do this the installation program must include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder he updated MAX, so when your Installer try to understand MAX, his request the source where it was installed in your computer in this case Vision Builder.

  Here you can cache information so it is not asked once again, or you can download a version more recent fo DAQmx, then it will update MAX and change the dependecy.

  You can find more details about it in this KB:

  3S88PJMY knowledge base: why do I get an error message 'Missing Distribution' when you try to build an install...

  And to keep a copy, here's more information:

  How to stop missing delivery Notification whenever I build an installer?

  Best regards

• Try to install the patch KB943729 and get this error. __

  Try to install the patch KB943729 and get this error.

  The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.

  Any help with this error.

  I've always found the icon on my Start button that indicates that an update is ready to be loaded and I have to restart my computer

  Open Internet Explore (only) to http://support.microsoft.com/kb/971058 & re-run the difficulty in AGGRESSIVE mode. [1]

  Reboot once more & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 0X0000007E Stop after installing the new card mother and CPU.

  Original title: Stop error after installing the new card mother and CPU.

  After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

  If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

  I hope this helps.

• After installing the last "Update Agent" I can always get updates for Windows 7 Home Premium?

  After installing the last "Update Agent" can't always updated for

  Windows 7 Home Premium?  After 2 days in dealing with this problem, I came to help?

  Someone please give me an answer!

  E-mail address is removed from the privacy *.

  Hello

  Please contact the Microsoft community.

  As you said that you are not able to get new updates of windows on the computer.

  I would like to ask some questions about your request:

  1. When was the last time that you install the windows desktop update?

  2. You receive an error message from the updates?

  3. You use any third-party antivirus on the computer?

  4. Did you do any change on your computer before the show?

  Please refer to the reference to the link below for " " " The problems with installing updates".

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Please get back to us with the information in short so that we can help you further.

• Windows wars Napoleon Cossacks 8. I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:

  I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?

  I would like to point out something that you may not realize: Windows 8
  has two interfaces; the modern/Metro Interface (which may be all the)
  you have looked at) and the traditional desktop Interface. You can use
  one or both. This traditional desktop Interface is almost
  identical to the interface of Windows 7. the biggest difference is that
  There is no Orb start clicking to bring up the start menu.

  But note that you can get the ORB start by using one of the many
  third-party programs, are free or very cheap (the classic interface
  http://classicshell.sourceforge.NET/ and debut8 to
  http://www.stardock.com/products/start8/; my personal preference is
  Debut8, but they are both very good).  And goes from an interface to
  the other is very easy; There are several ways, but simply by pressing
  the Windows key is perhaps the easiest.

  Just install one of these two and using the traditional desktop computer
  interface may be a better choice for you than going to Windows 7.
  I use Windows 8, almost exclusively with traditional workstations
  the interface and with 8 Start installed. If you were to look at and use
  my computer, you may have a hard time realizing that it is not
  Windows 7.
  I also recommend to read "how to make Windows 8 or 8.1 watch and.
  Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
  I can't address the issue with your games, except to say that
  whenever you move to a new version of the operating system, some of
  which is used to run on the former does not work on the new. And it's
  much more likely with utilities and games with companies
  applications.

• Cannot access internet after installing the latest Windows Update

  * Original title: Question access to the internet after you have installed the latest update

  Last week, I installed the latest update of Windows 8, however once installed, I was no longer able to access the internet and became a message saying that the page cannot be displayed. Below it there is a button to click to solve the problem of connection but I did and it came back with no connection problem.

  I reset my router, but there was no question that I could access the internet on my phone and my roommates laptop. The only way that I could access the internet again was to restore my pc and remove install.

  I was then forced to install the update tonight and it's the same thing so I had to uninstall these updates again to access the internet.

  Can you please tell how can I install the update it will affect my ability to access the internet?

  Hi Victoria,.

  Please help me with the following suggestions:

  1. using modern Internet Explorer user interface or Desktop Internet Explorer?
  2. your computer is in a cable or wireless internet connection?

  3. What is the number of the kb article that is causing the problem with the internet after installing the update?

  4. are you referring to Windows Update (KB2919355) 8.1?

  Windows Update: Frequently asked Questions see (how know what are updates
  been installed?)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Method 1: After the update is installed, configure the computer to boot and check if you questions persists:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Method 2: Click on the link below to troubleshoot if the internet explore does not work:

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  Warning: Reset Internet Explorer settings will not affect your browsing history, unless you check the delete personal settings during the reset. If you want only to view or delete your browsing history, you don't need to reset all the settings of Internet Explorer.

  I hope this helps. Answer please if you have any additional questions with Windows.