Quick way to identify unused advanced actions?

Similar Questions

• What is the quick way to check if the battery current sequency contains nothing or not?

  Hi all

  I have switch from C++ to the labview in a short time before. I got a code written in labview 7 someone else and I am trying to change a code in my labview 2012. In the code, there are a lot of nested structures (like sequency battery, case, etc.). Some code contains 30 batteries but not all subsequences contains controls or code. Someone when I pass in a sequence, it seems empty, but some controls or code could be hiding somewhere beyond the current view. Thus, instead of zoom current sequency block, is that any quick way to identify if the block contains another type or not? Thank you.

  It is spelled "sequence".

  Make sure that autogrow is enabled for the sequence stacked so that you don't have the problem of the code hidden beyond the edges.

  Right-click on the stacked sequence and choose replace with flat sequence.  It will extend things, but how you can see all the pictures.

  Block diagram cleanup allows to get rid of more space and clean up the code.

  If you see empty images, you can right-click on the border between frames and select merge the images.  You should also do this if you have separate frames that should not be because there is already a data dependence that determines the sequence of operation.

• Is there a way to set the order of the advanced actions?

  Hello.

  I try to set a peak action where an effect is applied to several objects, and then it climbs to a slide. Is it possible to define the action to make the jump from slide happen after effects?

  Here is a screenshot of the demo of what I'm looking for:

  

  I want each box of click to zoom out until the slide jump to another slide and the other 3 characters.

  I use 7 Captivate.

  Thank you.

  I have created an example, but used CP8, there will be a small difference for you in CP7. Those are the steps:

  • Create a variable user corresponding to each image that will follow if that one is clicked, a Boolean value with the default value of 0, branded the v_one, v_two... v_four
  • as I suspect you return to this slide, you need to reset all Boolean values enter; can be done with a tip action that affects 1 to each of the variables and don't forget the Continue statement as well
  • Make sure that the continue button has no suspension, and that the boxes to click on a break at 1 second before the end of the slide (1 second is the default duration of change of scale 0, what is the zoom effect)
  • I created a joint action for the areas of click, but since you can't define a variable as a parameter, you may use duplicates of the advanced actions:
    • Assign the v_one with 1
    • Apply the effect Image... Balance for x and Y, the value 0
    • Apply the effect Image... Balance for x and Y, the value 0
    • Apply the effect Image... Balance for x and Y, the value 0
    • Continue
  • Then created a conditional advanced action on the exit of the slide, with many decisions that you have variables, checks each variable and jump on this slide

• Faster advanced actions?

  I have a project with a screen that shows about 15 forms and a total score in the upper corner.

  When a user clicks on one of the forms of the form disappears and adds '10' to the dashboard (using a variable)

  I have a box click on each shape and you need a tip action to trigger the increment of 10 to the variable of dashboard and hide the corresponding shape.

  But this means I have to create 15 advanced actions, one for each form.

  Y at - it a way more quick to do, or is the only way to create a further action for each form of art?

  What version you are using, please? And is not at all a matter of "start." If you want to put me on the issue, waiting for your response.

  First: Why use a click on a form when the form can be used as a button? Who will save you half objects. This is possible because forms appeared with version 6.

  For the basic question, it depends on your version. If you are still on the 6, only way is indeed to reproduce advanced actions. If you're 7 or 8, use a shared action with the form (button) as the only parameter. You can apply shared action to each button of form, no need to set the variable of dashboard as parameter (which is possible in 8) being given that it never changes. Take a look on:

  Dare to share - part 1 - Captivate blog

  Dare to share - part 2 - Captivate blog

  Settings of the shared actions - Captivate 7 vs 8 - Captivate blog

  Re-use of stocks shared in other projects - Captivate 7 vs 8 - Captivate blog

  BTW, long, loooong I created a dashboard with advanced actions, maybe you will be interested (no action shared at that time here):

  Creating a board game results with Captivate 5 - Captivate blog

• Show and hide multiple items using wildcards in advanced Actions?

  Is there a way to show or hide multiple items at once by using a wildcard character in advanced Actions?  Ex: Hide all the boxes to click in the presentation that begin with click_ *.

  I'm trying to find a good way to use the same CBT to show me Mode (demo video with audio and no interaction) and the practice Mode (interactive simulation with boxes to click and prompt text box for interactions).

  I saw a few business solutions have the ability to have 1 source file that publishes on multiple formats (demo, simulation, quick guide).  However, they are a little more than 800 $de Captivate.

  Micky

  If I want to create a combination, I capture in all modes search and then copy and paste what I want one of the files? An example, but it's on a Dutch version of my blog, watch movie (power of lightning, hope, that you will always be able to see SWF?):

  http://captivatenederlands.posthaven.com/classic-tutorials

  Lilybiri

  PS as for your original question: no wildcard in advanced actions. You can filter drop-down lists on "click_" and only objects will appear then (in CP6/7) but you will still need a single statement by click box unless you group boxes click on a slide (impossible to group objects sitting on different slides).

• Adding Advanced action causes objects to not appear

  In Cp5.5 I have a strange situation. I created a questionnaire and everything worked very well. At one point, I noticed that on questions quiz that some just objects are not displayed, or rather, they display very faded, almost invisible. It's just about certain objects:

  • It concerns all the text captions and images added by me (no not objects standard quiz)
  • It's the only objects that appear either not 0 seconds on the timeline, or have "Fade In" effect. The objects that are on the chronology of 0 seconds and not including any transition normally appear
  • It can be easily fixed by removing the Action advanced in "on entry. The tip Action can contain anything or even be empty, it is not serious (currently it contains just "keep"). The fact that "on entrance" suggested Action is the cause of the problem.

  Copy of the slides to a new project does not help, bug moves with the slide. I tried to deconstruct the slide to identify the problem and remove almost everything, but the error is still there. The original quiz must have images that appear in the calendar after 1 second, and of course the quiz must Action Advanced enter. It seems that the only way is to recreate from scratch (no guarantee will not repeat the problem).

  Does anyone have an idea what to do to make it work?

  http://DL.dropbox.com/u/86167389/project.zip

  It seems that your advanced Actions has been corrupted somehow.

  When I removed both of your advanced Actions and implement new, the problem disappeared.

• How to identify unused tables?

  Hi all.
  
  I have more than 10,000 tables in the database to 10.2.0.4.
  
  I was asked to identify the unused tables, back up and delete these tables.
  
  Is there a good way to achieve this?
  
  The feature of 'monitor the use of the index' is not on the unused TABLES.
  
  Thanks in advance.
  Best regards.

  Salvation;

  Please check below link that might give u idea for your question:
  DML audit table to identify the unused tables
  http://blog.contractoracle.com/2009/09/table-DML-auditing-to-identify-unused.html
  http://www.dbasupport.com/forums/archive/index.php/t-49236.html

  Respect of
  HELIOS

• Object hidden in the project after Advanced action

  Scenario:

  I have a slide to preview Quiz set up that allows for the learner to choose to go back to some of the content to look again, or move forward for the quiz.  If they choose to return to the content, I won't have to retake the course (unless they want) so I created a form of "Take the Quiz" I use as button will bring back you to the quiz on any slide.  I placed on the first content slide and set it to display the rest of the way, but then made invisible to begin.

  What I've done so far:

  I have set up variables for each module and created a tip action that has defined the variable for each module to 1 it's over.  Each slide content performs an advanced action on enter to see if all module variables are set to 1.  If they are, the form of "Take the Quiz" appears.

  The problem:

  When the learner clicks to review the documents, the form of "Take the Quiz" don't appears on the initial slide, it was placed on, and not on any other blades.

  The only thing I can think of to get around this problem is to create a distinct "Take the Quiz" form for each slide and have action show them to all.  I would like to avoid that, as some of my courses have quite a few slides.

  Can someone suggest an another course of action for me?  I hope this is enough information, but if you need more, I will be happy to provide it.

  Thank you

  John

  When you set the point where the button shape "Rest of project", have you enabled the option "Always on top"?

• Issue of advanced Actions

  Hello

  I have a box click with the ability to use a keyboard shortcut. If you click the box click on I want to go to the next slide and add a point. If the shortcut key is used I want to move to another slide and 2 points. The difficulty in setting this up. Any advice?

  Thanks in advance.

  There is no way to have a different action for a click and the shortcut. I'm sorry. In addition, an interactive object can have only 01:20.

  Even with two interactive objects he could never work, because too much point 1 and 2 points would be added to the total score, which means 3 points in total.

• A custom in advanced actions effect switches back to default

  The old custom effects and advanced actions...

  I am trying to apply an effect to an object:

  

  But when I update the action, it changes by default:

  

  I tried to change the order as suggested by jmblackman in this thread: https://forums.adobe.com/thread/950517?q=advanced%20action%20custom%20effect

  But then the object will appear just without effect.

  Customization, I've done was the duration of the effect. So I don't really know if it really changes the default effect or that the duration of a custom effect is 1 second that I remember reading somewhere.

  Is there someone out there who controlled this part of Captivate?

  I use 8 Captivate by the way.

  Thank you

  Indeed, it is the flow of tedious work to make it appear in the list. But 0, 7secs won't work, too short. I really hope one day these limitations for effects by advanced actions will be done with.

• Bookmarking in LMS resets advanced actions

  Hello

  I designed a game quite complex in 8 Captivate with notation and emblem for a compulsory course of cyber security for my organization.  I just tested the feature bookmarking for my LMS course, and while the course resumes at the point where I left, I noticed that none of my triggered advanced actions and variables have been selected.  Is it possible to fix this?  Otherwise, it makes bookmarking effectively unusable.

  Thanks in advance.

  Dan

  It would work unless the user clears the shared objects.

  The shared object to repopulate the variables. Then in the slide "menu" run an advanced action to display trophies based on the values of the variables. If you click on the slide in the timeline, you'll see ' on the entry: "in the properties panel, select the drop-down list and choose Advanced action.

• Best approach advanced actions, mulitple selections of text on a slide with other information...

  Hello

  I have to do a slide that has multiple selections of text on a slide, but using advanced actions to change each Cap. text... for example...

  A cursor with the image for the user to click, when you click on a text caption appears, and in this caption text is a chip-shaped button that says 'Next' when that is clicked then another text Cap comes up with another button which also then said, then when that is clicked on and the cap of the final text is reached says the button then close. User can click on that and returns to the slide of the same hand.

  Was then I intended to do this was advanced use actions is the right approach? (or shared)...

  In addition, if the fact this way, it will affect scorm...?

  Kind regards

  Sabine

  I don't see the connection between your question and SCORM? These buttons are rated?

  If they are a few buttons to display the new text, which is not a score for each button, I would not use that many 'Next' buttons but keep the same button and uses a counter. The content of the text caption could be a variable for which you are editing content after each click. Counter should be used to check if the close button must appear and the next button hidden. This article is such an approach to click for images: Blog after Posterous? - ClickClick - Captivate blog

  And like to have a variable instead of static text, for which you can change the value: 'Beat the system' - save time by creating advanced Actions (Captivate) - Captivate blog

  No response yet on shared or advanced actions, it depends on which version you use, answers on the score and more questions.

• Advanced action scripts - y at - it a variable that tells me which button is clicked?

  Lilybiri gave me some great tips on the use of conditional tip action scripts. Now, I have another related question.

  I have three buttons A, B and C. Each button performs exactly the same series of actions to hide everything on the page, but shows another group of objects depending on which button was clicked - that is, to display the Group A and Group B group C.

  Currently, I have a separate advanced action script for each button (in fact a lot more than three) because of this difference, then want to combine in a single conditional script. However, I can't understand how I would like to know which button was clicked.  In other words, I think that my conditional script should look like this:

  The condition "always."

  If 1 is equal to 1

  [Script to hide all]...

  Continue

  Condition 'has '.

  If MyButton is equal to 'A '.

  See the group_A

  On the other

  Continue

  Condition 'B '.

  If MyButton is equal to 'B '.

  See the group_B

  On the other

  Continue

  Condition 'C '.

  If MyButton is equal to 'C '.

  See the group_C

  My problem is that I don't know how to set or get the value of MyButton to perform conditional tests. Is there a system variable that returns the value of a selected object? I looked at all the variables, and I don't see one. Or y at - it another way to do what I'm missing?

  You probably can find with Javascript, but not with advanced actions. All the available system variables that can be used - there are more - are in a table that you can download here: System variables in Captivate 8 - Captivate blog

  I have several articles on the shared use of stocks. You apply the same instance of a common action several times and don't have that to indicate parameters, in your case these parameters will be for most groups and objects. I hope that stocks shared will expand more in the future. They have several advantages: given that you use multiple instances of the same action that they do not increase the file size as duplicate advanced actions. In addition, you have them in the library that makes management much easier.

• Advanced actions - trying to show a text caption

  I have a slide with 5 legends from intelligent forms, and 5 click boxes. All 5 active forms are hidden. I have 5 variables, which are set to zero. When a click box is clicked, the corresponding chip shows form and the value of the first variable user is set to one. When another click, click on the corresponding box shape smart shows and the following user variable is set to 1. Each area of the click is configured in a similar way. I created 5 Advanced actions, and the action of success for each of the boxes click use one of 5 Advanced actions. The action for each click box looks something like this (I use generic names for this example):

  IF variable1 is equal to 0

  ACTIONS

  See the textCaption1

  Assign variable1 with 1

  Reading Audio sound.wav

  Continue

  It works very well and the corresponding smart forms are evidence as it should when each of the boxes to click is clicked on.

  But I have a comment text caption additional I want to show after all 5 intelligent forms are showing. I tried implementing a tip action that looks like this:

  IF

  Variable1 is equal to 1 AND

  variable2 is equal to 1 AND

  Variable3 is equal to 1 AND

  variable4 is equal to 1 AND

  variable5 is equal to 1

  ACTIONS

  See the feedbackTextCaption

  But even once all the boxes click user clicked (which must define each of the 5 variables to 1), the legend of notes text is not displayed.

  Can anyone help with a suggestion?

  @Sreekanth, which is not the right approach, because a user can click 5 times on the same box of click and see the final text caption. Only when you turn off an already clicked interactive object that can be used. Jay was right to choose five different variables.

  @Jay how you trigger this last conditional action? In which cases do you use? You explain that the first described action is triggered by the click box, but not what triggers the conditional action.

  I suspect that you will have to combine the two actions and assign them to each click box. This means a conditional action with two decisions:

  'Always' first decision needs the condition "If 1 is equal to 1", to create a simulated standard and must action be the text caption, set the variable to 1 and play the audio. I don't know why you added "continue?" If the boxes to click on break at the same time, do not add continue, let the playhead in the same place.

  Second decision "Checker" is conditional action you've written, check the values of the 5 variables, and if they all have the value 1 for display text in comments.

• Is there a quick way to encapsulate the informal in the tags [Para] text?

  I'm trying my new framework 12 trying to produce an ebook in several formats. I use the out-of-copyright Agatha Christie A MYSTERIOUS AFFAIR at STYLES.

  Is there a quick way to wrap each paragraph with a [Para] tag?

  Thanks in advance.

  TdeV1,

  With your extended description, I know now exactly what you mean. I am facing similar situations frequently, where I have several paragraphs that I need to paste it into a single element, then divide each paragraph in its own element.

  Unfortunately, FM has no native functionality to automate this process, despite the way it must be pretty common need. In my case, I'm a developer FDK and hacked together a small plugin it does. ExtendScript could also be used. If you don't want to do programming, then the other option is a conversion table. You will need to paste the content in a document completely unstructured, run the conversion process to structure, then copy the items newly covered in your DITA topic. You cannot run the conversion process on a document that currently has any structure.

  So to summarize, you must make some scripts/programs or learn how to build a conversion table. If this interests you, find conversion tables in the Structure Developer's Guide. In this case, it would be an exceptionally simple conversion table, perhaps even just a single line. If you have to do this process several times, I think it would be worth your time to study.

  Russ