Quiz conditional set up please help!

Similar Questions

• I have an Apple TV - box and needed to set up please help

  I need help to configure my Apple TV box

  I see that you have already visited the set up guide which steps are you having problems with.

• Please help with conditional actions showing the PlayBar

  I tried to set up a tip action that will not allow users to move forward until they have clicked on the 3 themes I want to see again them.  I assigned variables, follow the tutorials and do everything now.  Please help how I my Advanced actions set upwards... everything shows and hides all work so I have to assume that the assignment of variable works as well.  I used numbers initially and changed my value of the variable of "dude" just to make sure I was not missing something.

  

  Here's the aciton condtional which is performed after the entry of the slide

  

  All logic seems in tact for me however I click on each of my boxes and all conditions must be true, but will not display game bar...

  Note: I also tried to show a next button and just show the things randomly with the same logic and it just will not work... What am I doing wrong?

  Something escapes me in your question: How do trigger you the conditional action? I suspect that he is never executed, but may be wrong of course.

  I created a small example to check: slide contains 3 buttons that trigger an action condtional with two decisions. The first decision is a simulated standard measure (condition 1 = 1 is always correct) assigns the value 1 to the variable corresponding user and displays a caption text, that was initially hidden. This is a screenshot of this first decision Stand for the first Bt_One action to be triggered by the first button:

  

  The second decision Check is the action of condtional real, very similar to yours. This will be done after the first decision:

  

  Create a duplicate of this action for the other two buttons, you only have to edit the first decision where the user variable needs to be changed.

  In my example, when you click the last button (regardless of the sequence) all the text captions should have been disclosed (I na not hide others, but you can do the same of course) and the second decision check will result in a positive response, so the playback bar appears immediately.

  Lilybiri

• HP 630: I can't access hp hp630 bios setting... I do not know my password... can you please help.

  I can't access hp hp630 bios setting... I do not know my password... can you please help.

  Hello

  Enter 42444370

  Kind regards

  DP - K

• put an item into the basket, made an empty recycle bin, need return the item, please help, I did nothing since the drain, so the machine is in the same condition as when I emptied

  put an item into the basket, made an empty recycle bin, need return the item, please help, I did nothing since the drain, so the machine is in the same condition as when I emptied

  If you have xp, you can do system restore

• Please help im trying to import pictures from a SD card and get this set up the following files were not imported because it couldn't be read items 1-100 101-200 201-300 itmes points

  Please help im trying to import images from the SD card and get this set up the following files were not imported because it couldn't be read items 1-100

  "Could not be read" indicates that the Destination Directory has no WRITE permission in your operating system.

  To resolve this problem, you must

  1. Determine the Destination folder - it's on the right side of your import under Destination dialog box
  2. Change permissions in your operating system on this particular file have WRITE permission (or switch the destination to one that has the WRITE permission)

• How to play that button set chapters? Please help ASAP!

  How to play that button set chapters? Please help ASAP! I try to create 6 chapters of two videos, but I don't know how to set all play too. If I put a playlist with chapters 1 to 6 of the room all the button plays not all but only up to Chapter 2 and after the jump to finish and stop! What I've done wrong?

  If I put a playlist with chapters 1 to 6 of the room all the button plays not all but only up to Chapter 2 and after the jump to finish and stop! What I've done wrong?

  You have an end action or a substitution on any of the chapters.

• Hi I can not understand what happened to my stroke tool.  Try to make a white border around a picture inside the canvas and he does not.  No border even after setting the parameters.  Please help someone

  Hi just trying to use my race tool to make a white border around a picture in my Web.  Simply, it does not add the white border.  Very annoying and don't know now where I made a mistake, or is it a fault.  Someone please help?

  Is it the Edit > STROKE or STROKE a path?

  What is the size in pixels of the image?
  What is the width of the line in pixels?

  Viewing at 100%?

  Is the layer stroked you the top of the layer stack?

  What is the layer blend mode and opacity?

  What has been the race blend mode and opacity of the value?

• My ipod screen is black and I can not turn on, please help

  Hi my iPod Touch 5th generation 16 GB, exploded some 2 to 3 months ago. I turned on, but he couldn't come. I loaded but there was no indication that he was in charge. I connected it to my computer but itunes does not read, the screen is all black all the way. Please help me set up my iPod and the recovery/rehabilitation to zero.

  Thank you very much

  Did you try restarting force (now Home and power keys rack for 20 sec)?

• Bootcamp update fails after El capitan (please help me alone!)

  Hello

  I think I have the same problem postedBootcamp update fails after Yosemite (please help me alone!)

  But like the other user, I'm a little scared, and I don't want to lose my Bootcamp partition.

  That's why I ask you to help for solitaire (thank you much in advance).

  I upgraded my MacBook Pro 13 "(mi-2010) at El Capitan 10.11.5."

  Then I noticed that I could not find Bootcamp.

  Regarding the other question, the score was still there, but now under the name "disk0s4".

  I used Testdisk, following the advice, and I discovered the missing partion and data (I could make a copy)

  Now, I would be sure to make the right steps to retrieve the situation.

  Here is the output of Testdisk

  

  

  The partition does highlight is the right one, here's where I found my data.

  

  Now, what I'm supposed to do is follow the same steps that I read in the old post with 508484288 to step 7 and + 468284272 in step 8, in this way:

  GPT4 to rebuild using start/end offsets

  1. Sudo gdisk/dev/rdisk0
  2. P (print the complete list of parts)
  3. D (delete)
  4. 4 (part 4)
  5. N (new part)
  6. 4 (part 4)
  7. 508484288 (-start offset in the sectors or the starting point for the Bootcamp part)
  8. + 468284272 (-size offset, rather than the end offset)
  9. 0700 (part of Windows type)
  10. P (list of all parties just to see what changes will be)
  11. W (Write the new GPT)
  12. Y (Yes! really write the new GPT)

  And then I need to rebuild the MBR (as the old post)

  1. Sudo gdisk/dev/rdisk0
  2. P (print from parts list)
  3. R (Recover)
  4. O (current MBR hybrid in block letters)
  5. H (chooses hybrid)
  6. Partitioning numbers be hybridized: 2 3 4
  7. Y (good for the GRUB question)
  8. (Indicator boot part 2) N
  9. N (part 3-flag of boot)
  10. Y (boot indicator part 4 make the bootable NTFS partition)
  11. O (current MBR hybrid in block letters)
  12. W (Write new MBR)
  13. Y (yes! write the new MBR)
  14. Reset

  I'm sure I'm in the right direction, but...

  Many thanks for any help

  Excellent work. The two sets of Gdisk steps are correct. If you are on El Capitan, these two sets of measures Gdisk will fail because of the Protection of the integrity of system being activated. Please disable SIP.

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that all of the individual entries are still disabled.

• In input/out live telephone calls have "broken" sound only after updating to iOS 9.3 update on 6, please help...

  All entry/out live telephone calls have 'broken' sound only & unable to play the music on my phone after update to iOS 9.3 update on 6, please help...

  Hi there dmaclatchy,

  It sounds slipped you can not use the app phone on your phone, because the sound is uneven or inaudible and something is happening with your music do not let play. I want to quit all applications running on the phone:

  Force an app to close the iOS

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  
  If the problem persists, save your device in iTunes, then restore it like new and verify that it works.
  
  How to clear your iOS device and then set up as a new device or restore from backups

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself. Let us know how it goes! Thank you for using communities of Apple Support.

• in the past I have installed the cd into my itunes to mp3, then I transferred to my sandisk mp3 player, now I don't remember how to do this again, please help, what do I forget?

  in the past I have installed the cd into my itunes to mp3, then I transferred to my sandisk mp3 player and now I don't remember how to do this again, please help, what I forget

  Select Edit > Preferences > General (if necessary, press ctrl-B to activate the iTunes menu bar), click import settings..., then select MP3 encoder from the first drop-down and choose the setting of the quality required in the second dropdown.  This then becomes the default format for imported CD media.

• ConfigFree delivers, please help

  I have a satellite a75 laptop with a wi - fi card built-in. When I use windows to detect the networks, it works fine, but when I try to use configfree (I prefer to use on windows) it says my that I need to turn my switch on wireless on the side of the computer. the switch is turned on and the light is on, but I still get this message. Ive searched to see if anyone had the same problem, but I can't find anything, someone please help.

  Hey zero,

  ConfigFree is a small tool and helps you check the wireless connection. You can also make different profiles and as you can see there is also a wireless switch. To set up the Wi - Fi connection, you can still use the settings Windows wireless because there is no possibility to make a few settings wireless connection with configfree.

  Before you want to start configfree try to use FN + F8 and go to a WI - FI connection.

• My iPhone 4S has had problems with Wi - Fi and now I can't enable Wi - Fi more. Please help me solve this problem!

  My iPhone 4S began no not detecting WiFi signals. I have fixed that by removing the SIM card, but after awhile it was not detected at all and kept scanning. I tried to type the details of a Wi - Fi connection in the other section, but it didn't work. He says 'Could not find wireless networks'... I restarted because after removal of SIM card, which fixed the problem and now I can not turn on Wi - Fi. I need a Wi - Fi connection so please help me!

  A certified technician have a look...

  But it seems to me: I have seem similar symptoms before - as the WiFi radio gave up the ghost.

  I bet if you went to "Setting"-> "Général"-> "About" you won't see any address for the WiFi radio.

  If so, the radio has launched the bucket and as far as I know, it is part of the motherboard - there is therefore no route to the resurrection really... It is live with it that way, or get a replacement phone. I'm sorry.

• Cannot send email, but can receive through TalkTalk, please help

  I cannot sent TalkTalk email with the Mail application, but can receive OK Please help.  Error message 'password or invalid e-mail address' but these works in webmail.

  Delete the account and set it up again. The password that you defined for the outgoing e-mail server is incorrect.